c13f896686
These three are Zynq boards and the build procedure is almost the same. Having the SoC name prefix "zynq_" would be more consistent. Also, this is the way in which the Linux Device Trees and the U-Boot configuration files do. This commit renames as follows: zedboard_defconfig -> zynq_zed_defconfig microzed_defconfig -> zynq_microzed_defconfig xilinx_zc706_defconfig -> zynq_zc706_defconfig Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
69 lines
2.0 KiB
Plaintext
69 lines
2.0 KiB
Plaintext
This is the buildroot board support for the Avnet Microzed. The Microzed is
|
|
a development board based on the Xilinx Zynq-7000 based All-Programmable
|
|
System-On-Chip.
|
|
|
|
Microzed information including schematics, reference designs, and manuals are
|
|
available from http://www.zedboard.org .
|
|
|
|
Steps to create a working system for Microzed:
|
|
|
|
1) make zynq_microzed_defconfig
|
|
2) make
|
|
3) copy files BOOT.BIN, u-boot-dtb.img, rootfs.cpio.uboot,
|
|
uImage, zynq-zed.dtb into your SD card
|
|
4) boot your Microzed
|
|
|
|
The expected output:
|
|
|
|
U-Boot SPL 2015.07 (Sep 15 2015 - 16:10:56)
|
|
mmc boot
|
|
reading system.dtb
|
|
spl_load_image_fat_os: error reading image system.dtb, err - -1
|
|
reading u-boot-dtb.img
|
|
reading u-boot-dtb.img
|
|
|
|
|
|
U-Boot 2015.07 (Sep 15 2015 - 16:10:56 +0200)
|
|
|
|
Model: Zynq MicroZED Board
|
|
I2C: ready
|
|
DRAM: ECC disabled 1 GiB
|
|
MMC: zynq_sdhci: 0
|
|
Using default environment
|
|
...
|
|
|
|
When using an older U-Boot then 2015.07, a working ps7_init.c
|
|
file is required to be installed into the U-Boot directory
|
|
structure. From 2015.07, the major Zynq-based boards are
|
|
supported without any manual intervention.
|
|
|
|
Resulting system
|
|
----------------
|
|
A FAT32 partition should be created at the beginning of the SD Card
|
|
and the following files should be installed:
|
|
/BOOT.BIN
|
|
/zynq-zed.dtb
|
|
/uImage
|
|
/rootfs-cpio.uboot
|
|
/u-boot-dtb.img
|
|
|
|
All needed files can be taken from output/images/
|
|
|
|
BOOT.BIN, uImage and u-boot-dtb.img are direct copies of the same files
|
|
available on output/images/.
|
|
|
|
Note th at the DTB (zynq-zed.dtb) is the same as the one used for the
|
|
Zedboard, and that this is the recommended solution, see
|
|
https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856.
|
|
|
|
There is a patch attached that redefines the U-Boot's environment
|
|
to work with Buildroot out-of-the-box.
|
|
|
|
You can alter the booting procedure by creating a file uEnv.txt
|
|
in the root of the SD card. It is a plain text file in format
|
|
<key>=<value> one per line:
|
|
|
|
kernel_image=myimage
|
|
modeboot=myboot
|
|
myboot=...
|