0f72e01e05
ERROR: hdimage(sdcard.img): part boot: 'partition-type' is only valid for mbr and hybrid partition-table-type To fix the first genimage error report, change 'partition-type' entries to the appropriate 'partition-type-uuid'. Then genimage starts to complain about overlaps: ERROR: hdimage(sdcard.img): partition [GPT array] (offset 0x100000, size 0x4000) overlaps previous partition u-boot (offset 0x2000, size 0x102000) ERROR: hdimage(sdcard.img): bootloaders, etc. that overlap with the partition table must declare the overlapping area as a hole. To fix the second genimage error report, update the size of bootloader file. Do not reserve additional space for GPT partition table since new genimage is able to keep track of it. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/2021478371 Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| rootfs_overlay/lib/firmware/brcm | ||
| boot.cmd | ||
| genimage.cfg | ||
| linux-extras.config | ||
| readme.txt | ||
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi Zero Plus2. With the current configuration
it will bring-up the board, and allow access through the serial console.
Orangepi Zero Plus2 link:
http://www.orangepi.org/OrangePiZeroPlus2/
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Zero+Plus2
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make orangepi_zero_plus2_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Orangepi Zero Plus2 and power it up. The console
is on the serial line, 115200 8N1.