kumquat-buildroot/board/avnet/zedboard/readme.txt
Spenser Gilliland acb457e750 defconfigs: zedboard add info about uboot installation
Add info about how to install a custom uboot on the zedboard.

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-02-07 21:35:34 +01:00

29 lines
825 B
Plaintext

This is the buildroot board support for the Avnet Zedboard. The Zedboard is
a development board based on the Xilinx Zynq-7000 based All-Programmable
System-On-Chip.
Zedboard information including schematics, reference designs, and manuals are
available from http://www.zedboard.org .
To boot the Zedboard using a buildroot generated image copy the following files
to the sdcard:
zynq-zed.dtb -> devicetree.dtb
rootfs.cpio.gz.uboot -> uramdisk.image.gz
uImage -> uImage
Uboot Support
-------------
Uboot is installed in a wrapper file called BOOT.BIN located on the root of
the SD card. To create the BOOT.BIN file do the following.
source <path/to/xilinx/settings.sh>
cat <<EOF > boot.bif
{
[bootloader]<path/to/fsbl.elf>
<path/to/system.bit>
<path/to/uboot.elf>
}
EOF
bootgen -image boot.bif -o i BOOT.BIN