NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
89a3f73910
kumquat-buildroot/board/minnowboard
History
Peter Korsgaard 03c817553a board/minnowboard: grub.cfg: disable eudev network interface renaming 
So the normal DHCP-on-eth0 logic works for the graphical defconfig where
eudev is used.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2021-01-31 21:32:38 +01:00
..
fs-overlay-graphical/etc
genimage.cfg configs/minnowboard_max_defconfig: bump kernel to 5.10.11 2021-01-31 21:32:24 +01:00
grub.cfg board/minnowboard: grub.cfg: disable eudev network interface renaming 2021-01-31 21:32:38 +01:00
linux.config configs/minnowboard_max_defconfig: bump kernel to 5.10.11 2021-01-31 21:32:24 +01:00
post-build.sh
readme.txt

readme.txt 

How to get started with the MinnowBoard MAX
===========================================

1. Build

  Apply the defconfig:

  $ make minnowboard_max_defconfig

  Add any additional packages required and build:

  $ make

2. Write the SD card

  The build process will create a SD card image in output/images.
  Write the image to an mSD card, insert into the MinnowBoard MAX
  and power the board on.

  $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync

  The system starts two consoles: one on the serial port
  and one on HDMI.

3. Enjoy

Additional information about this board can be found at
http://www.minnowboard.org/.