fe8f95a61e
Add support for MangoPi MQ1RDW2: https://mangopi.org/mqr An Allwinner T113-S3(2xCortex-A7+128MB DDR3-1600 embedded) based SBC with: * USB-OTG Type-C socket * USB-HOST Type-C socket * 2x 18 pin GPIO headers * TF card slot * RTL8723DS WiFi module with ext. antenna connector * 40 pin RGB FPC connector * 6 pin CTP FPC connector * 24 pin DVP FPC connector * onboard mic * onboard audio amplifier * FEL,reset button Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
41 lines
1.4 KiB
Plaintext
41 lines
1.4 KiB
Plaintext
BR2_arm=y
|
|
BR2_cortex_a7=y
|
|
BR2_ARM_FPU_VFPV4=y
|
|
BR2_TARGET_GENERIC_HOSTNAME="mangopi-mq1rdw2"
|
|
BR2_TARGET_GENERIC_ISSUE="Welcome to MangoPI MQ1RDW2"
|
|
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
|
|
BR2_TARGET_GENERIC_GETTY_PORT="ttyS3"
|
|
BR2_SYSTEM_DHCP="eth0"
|
|
BR2_ROOTFS_OVERLAY="board/mangopi/mq1rdw2/rootfs_overlay"
|
|
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
|
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/mangopi/mq1rdw2/genimage.cfg"
|
|
BR2_LINUX_KERNEL=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.5"
|
|
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
|
|
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-t113s-mangopi-mq-r-t113"
|
|
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
|
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
|
BR2_PACKAGE_RTL8723DS=y
|
|
BR2_PACKAGE_WIRELESS_TOOLS=y
|
|
BR2_PACKAGE_WPA_SUPPLICANT=y
|
|
BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
|
|
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
|
|
BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO=y
|
|
BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
|
|
BR2_TARGET_ROOTFS_EXT2=y
|
|
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
BR2_TARGET_UBOOT=y
|
|
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
|
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
|
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01-rc4"
|
|
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mangopi_mq_r"
|
|
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
|
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
|
|
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
|
BR2_TARGET_UBOOT_SPL=y
|
|
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
|
|
BR2_PACKAGE_HOST_GENIMAGE=y
|