Luca Ceresoli e865a1f03c uboot: zynqmp: generate SPL image with PMUFW binary ... In order to boot on the Xilinx ZynqMP SoCs, U-Boot SPL requires a recent PMU firmware loaded. Instruct U-Boot to add pmufw.bin to the boot.bin file together with U-Boot SPL, and the boot ROM will load both. For this to work properly, a patch to U-Boot is needed. However this patch must be applied by each defconfig that wishes to use BR2_TARGET_UBOOT_ZYNQMP_PMUFW. If it were in boot/uboot/ to be applied unconditionally, it would break the build for configs using a U-Boot version higher than 2018.7-rc1 where the patch is already applied. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Joel Carlson <joelsoncarl@gmail.com> Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com> Tested-by: Joel Carlson <JoelsonCarl@gmail.com> [Thomas: - indicate that this feature requires U-Boot 2018.07, since commit c7df098a71e05dc81cee818747759e8060b59626 is needed. - define UBOOT_ZYNQMP_KCONFIG_PMUFW only once, and instead use a variable named UBOOT_ZYNQMP_PMUFW_PATH to store the path to the PMU firmware] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>		2018-07-28 16:32:07 +02:00
..
2015.07	u-boot: 2015.07 - fix creation of .config	2015-08-30 22:40:35 +02:00
2016.07	u-boot: Fix building for ARC700	2016-09-25 23:24:27 +02:00
2016.09.01	u-boot: Fix building for ARC700	2016-09-25 23:24:27 +02:00
Config.in	uboot: zynqmp: generate SPL image with PMUFW binary	2018-07-28 16:32:07 +02:00
uboot.hash	uboot: bump to version 2018.07	2018-07-27 09:18:59 +02:00
uboot.mk	uboot: zynqmp: generate SPL image with PMUFW binary	2018-07-28 16:32:07 +02:00