Intro
=====
The instructions herein are valid for the FriendlyARM NanoPi NEO,
both the 256MiB and 512MiB versions. They should also work for the
NanoPi NEO Air, but this is untested so far.
The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
- quad-core Cortex-A7 @1.2GHz
- 256 or 512MiB of DDR
- uSDCard as only storage option
- 3x USB 2.0 host (one socket, two on expansion pin-holes)
- 1x USB 2.0 OTG (also used as power source)
- 10/100 ethernet MAC
- GPIOs, SPI, I2c...
Support for the Nanopi NEO in U-Boot and Linux is very recent, so only
core, basic features are available.
Unfortunately, support for the ethernet MAC and the USB OTG are not
yet upstream, but are being actively worked on.
How to build
============
$ make nanopi_neo_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
You will then obtain an image ready to be written to your micro SDcard:
$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
Notes:
- replace 'sdX' with the actual device with your micro SDcard,
- you may need to be root to do that (use 'sudo').
Insert the micro SDcard in your NanoPi NEO and power it up. The console
is on the serial line, 115200 8N1.
e3e31ad84b