NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
8526bebc88
kumquat-buildroot/board/friendlyarm/nanopi-neo-plus2
History
Louis Aussedat d867e80773 configs/friendlyarm_nanopi_neo_plus2: use an extlinux instead of boot.cmd 
This remove the file boot.cmd to use an extlinux.conf instead.

Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-12-10 09:02:25 +01:00
..
rootfs_overlay/lib/firmware/brcm
extlinux.conf
genimage.cfg
linux-extras.config
post-build.sh
readme.txt

readme.txt 

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Nanopi NEO Plus2. With the current configuration
it will bring-up the board, and allow access through the serial console.

Nanopi NEO2 link:
http://nanopi.io/nanopi-neo-plus2.html

Wiki link:
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2

This configuration uses U-Boot mainline and kernel mainline.

How to build
============

    $ make friendlyarm_nanopi_neo_plus2_defconfig
    $ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
  $ sudo sync

Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
is on the serial line, 115200 8N1.