688c9aab75
Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC (quad A53), 8/16GB eMMC and 1/2GB RAM. Both the s905 (gxbb) and s905x (gxl) variant is supported. This defconfig uses mainline Linux. As the mainline support for s905 is quite young, use the latest release candidate. There is currently no support for this board in U-Boot or sources available for the vendor U-Boot, so the defconfig doesn't build a u-boot and instead uses the existing U-Boot available in the eMMC. This also means that we need to wrap the kernel as uImage, which isn't suppported for aarch64. Instead this is done in the post-build script. Mainline aarch64 defconfig builds most drivers modular, so add mdev for module autoloading. [Peter: explicitly set BR2_cortex_a53=y] Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
12 lines
318 B
Plaintext
12 lines
318 B
Plaintext
setenv bootargs console=ttyAML0,115200 earlyprintk root=/dev/mmcblk1p2 rootwait
|
|
|
|
fatload mmc 0:1 0x01080000 uImage
|
|
|
|
if itest.s "${aml_dt}" == "gxl_p212_2g"; then
|
|
fatload mmc 0:1 $dtb_mem_addr meson-gxl-nexbox-a95x.dtb
|
|
else
|
|
fatload mmc 0:1 $dtb_mem_addr meson-gxbb-nexbox-a95x.dtb
|
|
fi
|
|
|
|
bootm 0x1080000 - $dtb_mem_addr
|