NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
813713ef48
kumquat-buildroot/board/nexbox/a95x
History
Peter Korsgaard 850a6ae1ed configs/nexbox_a95x_defconfig: bump to kernel 5.10.12 
The mmc probing order has changed since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4), so get rid of
the hardcoded root=/dev/mmcblk1p2.  The old vendor U-Boot unfortunately does
not have GPT support, so stick to MBR and use the legacy
root=PARTUUID=<disksignature>-<partition> format and set a fixed disk
signature, similar to how it was done for orangepi-r1 in commit 34cce93adb
(configs/orangepi_r1_defconfig: bump kernel to 5.10.10, u-boot to 2020.10).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2021-02-04 18:15:09 +01:00
..
boot.txt configs/nexbox_a95x_defconfig: bump to kernel 5.10.12 2021-02-04 18:15:09 +01:00
genimage.cfg configs/nexbox_a95x_defconfig: bump to kernel 5.10.12 2021-02-04 18:15:09 +01:00
post-build.sh
post-image.sh
readme.txt

readme.txt 

Nexbox A95X

Intro
=====

Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC
(quad A53), 8/16GB eMMC and 1/2GB RAM.  To use this defconfig, wires to the
internal UART solder pads must be added.  See the linux-meson page for
details:

http://linux-meson.com/doku.php?id=nexbox_a95x_s905

Both the s905 (gxbb) and s905x (gxl) variant is supported.

This default configuration will allow you to start experimenting with the
buildroot environment for the A95X.  With the current configuration it will
bring-up the board from microSD, and allow access through the serial
console.

How to build it
===============

Configure Buildroot:

    $ make nexbox_a95x_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto a microSD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

How to boot
===========

Insert microSD card and connect serial cable. Power board and stop
U-Boot by pressing any key. Boot the system by typing:

fatload mmc 0:1 0x1070000 boot.scr
autoscr 0x1070000