kumquat-buildroot/package/samba/samba.mk
Thomas Petazzoni 9e06a85616 samba: remove swat documentation when not needed
When SWAT (the Web administration tool of Samba) is enabled, which is
the default when one enables samba in Buildroot, a lot of
documentation gets installed in /usr/swat (~15 MB). This patch fixes
this by removing the documentation when BR2_HAVE_DOCUMENTATION is not
set.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2010-07-29 22:18:56 +02:00

187 lines
6.4 KiB
Makefile

#############################################################
#
# samba
#
#############################################################
SAMBA_VERSION:=3.3.13
SAMBA_SOURCE:=samba-$(SAMBA_VERSION).tar.gz
SAMBA_SITE:=http://samba.org/samba/ftp/stable/
SAMBA_SUBDIR = source
SAMBA_AUTORECONF = NO
SAMBA_LIBTOOL_PATCH = NO
SAMBA_INSTALL_STAGING = YES
SAMBA_INSTALL_TARGET = YES
SAMBA_DEPENDENCIES = \
$(if $(BR2_ENABLE_LOCALE),,libiconv) \
$(if $(BR2_PACKAGE_SAMBA_RPCCLIENT),readline) \
$(if $(BR2_PACKAGE_SAMBA_SMBCLIENT),readline) \
$(if $(BR2_PACKAGE_SAMBA_AVAHI),avahi) \
$(if $(BR2_PACKAGE_SAMBA_GAMIN),gamin)
SAMBA_CONF_ENV = \
samba_cv_HAVE_GETTIMEOFDAY_TZ=yes \
samba_cv_USE_SETREUID=yes \
samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=yes \
samba_cv_HAVE_IFACE_IFCONF=yes \
samba_cv_HAVE_MMAP=yes \
samba_cv_HAVE_FCNTL_LOCK=yes \
samba_cv_HAVE_SECURE_MKSTEMP=yes \
samba_cv_CC_NEGATIVE_ENUM_VALUES=yes \
samba_cv_fpie=no \
libreplace_cv_HAVE_IPV6=$(if $(BR2_INET_IPV6),yes,no) \
$(if $(BR2_PACKAGE_SAMBA_AVAHI),AVAHI_LIBS=-pthread)
SAMBA_CONF_OPT = \
--localstatedir=/var \
--with-piddir=/var/run \
--with-lockdir=/var/lock \
--with-logfilebase=/var/log \
--with-configdir=/etc/samba \
--with-privatedir=/etc/samba \
\
--disable-cups \
--disable-static \
--enable-shared \
--enable-shared-libs \
--disable-pie \
--disable-relro \
--disable-dnssd \
\
$(if $(BR2_PACKAGE_SAMBA_AVAHI),--enable-avahi,--disable-avahi) \
$(if $(BR2_PACKAGE_SAMBA_GAMIN),--enable-fam,--disable-fam) \
$(if $(BR2_PACKAGE_SAMBA_SWAT),--enable-swat,--disable-swat) \
\
--without-cluster-support \
--without-cifsupcall \
--without-ads \
--without-ldap \
--with-included-popt \
--with-included-iniparser \
--with-libiconv=$(STAGING_DIR) \
\
$(if $(BR2_PACKAGE_SAMBA_CIFS),--with-cifsmount,--without-cifsmount) \
$(if $(BR2_PACKAGE_SAMBA_RPCCLIENT),--with-readline=$(STAGING_DIR)) \
$(if $(BR2_PACKAGE_SAMBA_SMBCLIENT),--with-readline=$(STAGING_DIR)) \
$(if $(BR2_PACKAGE_SAMBA_WINBINDD),--with-winbind,--without-winbind)
SAMBA_INSTALL_TARGET_OPT = \
DESTDIR=$(TARGET_DIR) -C $(SAMBA_DIR)/$(SAMBA_SUBDIR) \
installlibs installservers installbin installscripts \
$(if $(BR2_PACKAGE_SAMBA_CIFS),installcifsmount) \
$(if $(BR2_PACKAGE_SAMBA_SWAT),installswat)
SAMBA_UNINSTALL_TARGET_OPT = \
DESTDIR=$(TARGET_DIR) -C $(SAMBA_DIR)/$(SAMBA_SUBDIR) \
uninstalllibs uninstallservers uninstallbin uninstallscripts \
$(if $(BR2_PACKAGE_SAMBA_CIFS),uninstallcifsmount) \
$(if $(BR2_PACKAGE_SAMBA_SWAT),uninstallswat)
$(eval $(call AUTOTARGETS,package,samba))
# binaries to keep
SAMBA_BINTARGETS_y = \
usr/sbin/smbd \
usr/lib/libtalloc.so \
usr/lib/libtdb.so
# binaries to remove
SAMBA_BINTARGETS_ = \
usr/lib/libnetapi.so* \
usr/lib/libsmbsharemodes.so*
# binaries to keep or remove
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_CIFS) += usr/sbin/mount.cifs
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_CIFS) += usr/sbin/umount.cifs
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_EVENTLOGADM) += usr/bin/eventlogadm
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_NET) += usr/bin/net
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_NMBD) += usr/sbin/nmbd
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_NMBLOOKUP) += usr/bin/nmblookup
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_NTLM_AUTH) += usr/bin/ntlm_auth
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_PDBEDIT) += usr/bin/pdbedit
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_PROFILES) += usr/bin/profiles
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_RPCCLIENT) += usr/bin/rpcclient
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBCACLS) += usr/bin/smbcacls
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBCLIENT) += usr/bin/smbclient
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBCONTROL) += usr/bin/smbcontrol
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBCQUOTAS) += usr/bin/smbcquotas
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBGET) += usr/bin/smbget
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBLDBTOOLS) += usr/bin/ldbadd
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBLDBTOOLS) += usr/bin/ldbdel
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBLDBTOOLS) += usr/bin/ldbedit
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBLDBTOOLS) += usr/bin/ldbmodify
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBLDBTOOLS) += usr/bin/ldbrename
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBLDBTOOLS) += usr/bin/ldbsearch
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBPASSWD) += usr/bin/smbpasswd
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBSHARESEC) += usr/bin/sharesec
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBSPOOL) += usr/bin/smbspool
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBSTATUS) += usr/bin/smbstatus
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SMBTREE) += usr/bin/smbtree
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_SWAT) += usr/sbin/swat
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_TDB) += usr/bin/tdbbackup
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_TDB) += usr/bin/tdbdump
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_TDB) += usr/bin/tdbtool
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_TESTPARM) += usr/bin/testparm
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_WINBINDD) += usr/sbin/winbindd
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_WBINFO) += usr/bin/wbinfo
# libraries to keep or remove
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_WINBINDD) += usr/lib/libwbclient.so*
SAMBA_BINTARGETS_$(BR2_PACKAGE_SAMBA_LIBSMBCLIENT) += usr/lib/libsmbclient.so*
# non-binaries to remove
SAMBA_TXTTARGETS_ = \
usr/include/libsmbclient.h \
usr/include/netapi.h \
usr/include/smb_share_modes.h \
usr/include/talloc.h \
usr/include/tdb.h \
usr/include/wbclient.h
# non-binaries to keep or remove
SAMBA_TXTTARGETS_$(BR2_PACKAGE_SAMBA_FINDSMB) += usr/bin/findsmb
SAMBA_TXTTARGETS_$(BR2_PACKAGE_SAMBA_SMBTAR) += usr/bin/smbtar
$(SAMBA_HOOK_POST_INSTALL):
$(call MESSAGE,"Post installing")
# remove unneeded
rm -f $(addprefix $(TARGET_DIR)/, $(SAMBA_BINTARGETS_))
rm -f $(addprefix $(TARGET_DIR)/, $(SAMBA_TXTTARGETS_))
ifeq ($(BR2_PACKAGE_SAMBA_SWAT),y)
ifneq ($(BR2_HAVE_DOCUMENTATION),y)
# Remove the documentation
rm -rf $(TARGET_DIR)/usr/swat/help/manpages
rm -rf $(TARGET_DIR)/usr/swat/help/Samba3*
rm -rf $(TARGET_DIR)/usr/swat/using_samba/
# Removing the welcome.html file will make swat default to
# welcome-no-samba-doc.html
rm -rf $(TARGET_DIR)/usr/swat/help/welcome.html
endif
endif
# strip binaries
$(STRIPCMD) $(STRIP_STRIP_ALL) $(addprefix $(TARGET_DIR)/, $(SAMBA_BINTARGETS_y))
# install start/stop script
@if [ ! -f $(TARGET_DIR)/etc/init.d/S91smb ]; then \
$(INSTALL) -m 0755 -D package/samba/S91smb $(TARGET_DIR)/etc/init.d/S91smb; \
fi
# install config
@if [ ! -f $(TARGET_DIR)/etc/samba/smb.conf ]; then \
$(INSTALL) -m 0755 -D package/samba/simple.conf $(TARGET_DIR)/etc/samba/smb.conf; \
fi
$(Q)touch $@