7dcb9e98b5
The Qemu version present in readme.txt files was needed when
the Buildroot's Qemu defconfig was tested manually using the
qemu-system-<arch> binary already present on the host.
This information is now incorrect since we are using host-qemu
package, currently at 4.2.0 version, to do a runtime test since
0c79350638.
For m68k-q800, we can use the upstream qemu since 4.2.0 release
[1].
So, remove this line from the readme.txt.
[1] https://www.qemu.org/2019/12/13/qemu-4-2-0/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
137 lines
4.6 KiB
Plaintext
137 lines
4.6 KiB
Plaintext
Board qemu_arm_vexpress_tz builds a QEMU ARMv7-A target system with
|
|
OP-TEE running in the TrustZone secure world and a Linux based
|
|
OS running in the non-secure world. The board configuration enables
|
|
builds of the QEMU host ARM target emulator.
|
|
|
|
make qemu_arm_vexpress_tz_defconfig
|
|
make
|
|
|
|
The BIOS used in the QEMU host is the ARM Trusted Firmware-A (TF-A). TF-A
|
|
uses QEMU semihosting file access to access boot image files. The
|
|
QEMU platform is quite specific for that in TF-A and one needs to
|
|
run the emulation from the image directory for TF-A to boot the
|
|
secure and non-secure worlds.
|
|
|
|
cd output/images && ../host/bin/qemu-system-arm \
|
|
-machine virt -machine secure=on -cpu cortex-a15 \
|
|
-smp 1 -s -m 1024 -d unimp \
|
|
-serial stdio \
|
|
-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
|
|
-semihosting-config enable,target=native \
|
|
-bios bl1.bin
|
|
|
|
The boot stage traces (if any) followed by the login prompt will appear
|
|
in the terminal that started QEMU.
|
|
|
|
If you want to emulate more cores, use "-smp {1|2|3|4}" to select the
|
|
number of cores.
|
|
|
|
Note: "-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic"
|
|
brings network support that is used i.e. in OP-TEE regression tests.
|
|
|
|
|
|
-- Boot Details --
|
|
|
|
TF-A is used as QEMU BIOS. Its BL1 image boots and load its BL2 image. In turn,
|
|
this image loads the OP-TEE secure world (ARMv7-A BL32 stage) and the U-boot as
|
|
non-secure bootloader (BL33 stage).
|
|
|
|
QEMU natively hosts and loads in RAM the QEMU ARM target device tree. OP-TEE
|
|
reads and modifies its content according to OP-TEE configuration.
|
|
|
|
Enable TF-A traces from LOG_LEVEL (I.e LOG_LEVEL=40) from
|
|
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES.
|
|
|
|
|
|
-- OP-TEE Traces --
|
|
|
|
Secure boot stages and/or secure runtime services may use a serial link for
|
|
their traces.
|
|
|
|
The ARM Trusted Firmware outputs its traces on the QEMU standard (first)
|
|
serial interface.
|
|
|
|
The OP-TEE OS uses the QEMU second serial interface.
|
|
|
|
To get the OP-TEE OS traces, append a second -serial argument after
|
|
-serial stdio in the QEMU command line. I.e, the following enables 2 serial
|
|
consoles over telnet connections:
|
|
|
|
cd output/images && ../host/bin/qemu-system-arm \
|
|
-machine virt -machine secure=on -cpu cortex-a15 \
|
|
-smp 1 -s -m 1024 -d unimp \
|
|
-serial telnet:127.0.0.1:1235,server \
|
|
-serial telnet:127.0.0.1:1236,server \
|
|
-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
|
|
-semihosting-config enable,target=native \
|
|
-bios bl1.bin
|
|
|
|
QEMU is now waiting for the telnet connection. From another shell, open a
|
|
telnet connection on the port for the U-boot and Linux consoles:
|
|
|
|
telnet 127.0.0.1 1235
|
|
|
|
and again for the secure console
|
|
|
|
telnet 127.0.0.1 1236
|
|
|
|
|
|
-- Using gdb --
|
|
|
|
One can debug the OP-TEE secure world using GDB through the QEMU host.
|
|
To do so, simply run the qemu-system-arm emulation, then run a GDB client
|
|
and connect the QEMU internal GDB server.
|
|
|
|
The example below assumes we run QEMU and the GDB client from the same
|
|
host computer. We use option -S of qemu-system-arm to make QEMU
|
|
waiting for the GDB continue instruction before booting the images.
|
|
|
|
From a first shell:
|
|
cd output/images && ../host/bin/qemu-system-arm \
|
|
-machine virt -machine secure=on -cpu cortex-a15 \
|
|
-smp 1 -s -m 1024 -d unimp \
|
|
-serial stdio \
|
|
-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
|
|
-semihosting-config enable,target=native \
|
|
-bios bl1.bin \
|
|
-S
|
|
|
|
From a second shell:
|
|
./output/host/bin/arm-linux-gdb
|
|
GNU gdb (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 8.1.1.20180704-git
|
|
Copyright (C) 2018 Free Software Foundation, Inc.
|
|
...
|
|
For help, type "help".
|
|
Type "apropos word" to search for commands related to "word".
|
|
(gdb)
|
|
|
|
From this GDB console, connect to the target, load the OP-TEE core symbols,
|
|
set a breakpoint to its entry point (__text_start) and start emulation:
|
|
|
|
(gdb) target remote 127.0.0.1:1234
|
|
(gdb) symbol-file ./output/build/optee-os-<reference>/out/arm/core/tee.elf
|
|
(gdb) hbreak __text_start
|
|
Hardware assisted breakpoint 1 at 0xe100000: file core/arch/arm/kernel/generic_entry_a32.S, line 246.
|
|
(gdb) cont
|
|
Continuing.
|
|
|
|
Thread 1 hit Breakpoint 1, _start () at core/arch/arm/kernel/generic_entry_a32.S:246
|
|
246 bootargs_entry
|
|
(gdb)
|
|
|
|
|
|
Emulation has started, TF-A has loaded OP-TEE and U-boot images in memory and
|
|
has booted OP-TEE. Emulation stopped at OP-TEE core entry.
|
|
|
|
Note: QEMU hosts a GDB service listening to TCP port 1234, as set through
|
|
qemu-system-arm command line option -s.
|
|
|
|
Note: To build the GDB server, the following extra options have to be added to
|
|
the Buildroot configuration:
|
|
|
|
BR2_ENABLE_DEBUG=y
|
|
BR2_PACKAGE_GDB=y
|
|
BR2_PACKAGE_HOST_GDB=y
|
|
BR2_TOOLCHAIN_BUILDROOT_CXX=y
|
|
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
|