|
…
|
||
|---|---|---|
| .. | ||
| overlay/boot/extlinux | ||
| genimage.cfg | ||
| post-build.sh | ||
| readme.txt | ||
| star64-uboot-fit-image.its | ||
Pine64 Star64 ============= The Star64 is a low-cost RISC-V 64-bit based platform, powered by a Starfive JH7110 processor. https://wiki.pine64.org/wiki/STAR64 How to build ============ $ make pine64_star64_defconfig $ make How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX conv=fdatasync Preparing the board =================== Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). Insert your SD card. Power-up the board using a 12V power supply.