a5689ca365
Bump U-Boot to version 2018.11. This version supports autodetection of SD/eMMC boot source, so we can now enable environment load from SD card. Add a U-Boot kconfig fragment that sets SD/eMMC as environment load/save device. This avoids stale environment values from the SPI flash. That in turn, allows to use the more convenient distro boot which is enabled in the default environment. Bump kernel to version 4.19.2. This version enables CONFIG_PHY_MVEBU_CP110_COMPHY in the arm64 defconfig, so remove it from the kernel kconfig fragment. Enable support for SFP modules detection and configuration. Leave the PHY drivers for now to keep them built into the kernel. The kernel defconfig builds these drivers as modules. But that does not work as expected in the default configuration. Cc: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
48 lines
1.8 KiB
Plaintext
48 lines
1.8 KiB
Plaintext
BR2_aarch64=y
|
|
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
|
|
BR2_TARGET_GENERIC_HOSTNAME="mcbin"
|
|
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for Marvell MacchiatoBin"
|
|
|
|
# Firmware
|
|
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
|
|
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
|
|
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/MarvellEmbeddedProcessors/atf-marvell.git"
|
|
# This commit corresponds to release armada-18.09.4
|
|
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="711ecd32afe465b38052b5ba374c825b158eea18"
|
|
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="a80x0_mcbin"
|
|
BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
|
|
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
|
|
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0"
|
|
BR2_TARGET_BINARIES_MARVELL=y
|
|
BR2_TARGET_BINARIES_MARVELL_8040=y
|
|
BR2_TARGET_MV_DDR_MARVELL=y
|
|
|
|
# U-Boot
|
|
BR2_TARGET_UBOOT=y
|
|
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
|
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.11"
|
|
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
|
BR2_TARGET_UBOOT_USE_DEFCONFIG=y
|
|
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mvebu_mcbin-88f8040"
|
|
BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/solidrun/macchiatobin/uboot-fragment.config"
|
|
|
|
# Kernel
|
|
BR2_LINUX_KERNEL=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.2"
|
|
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
|
|
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
BR2_LINUX_KERNEL_INTREE_DTS_NAME="marvell/armada-8040-mcbin"
|
|
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/solidrun/macchiatobin/linux-extras.config"
|
|
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
|
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
|
|
|
# rootfs
|
|
BR2_TARGET_ROOTFS_TAR=y
|
|
BR2_TARGET_ROOTFS_EXT2=y
|
|
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
|
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/solidrun/macchiatobin/genimage.cfg"
|
|
BR2_ROOTFS_POST_BUILD_SCRIPT="board/solidrun/macchiatobin/post-build-mainline.sh"
|