e1a0a8858e
This configuration provides a basic setup for using Buildroot to create a sd-card image a BeagleBoard X15 board. [Peter: use 512M ext4 partition, linux 4.9 and u-boot 2016.11] Signed-off-by: Theo Debrouwere <Theo.Debrouwere@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
50 lines
1015 B
Plaintext
50 lines
1015 B
Plaintext
BeagleBoard X15
|
|
|
|
Intro
|
|
=====
|
|
This config currently supports the beagleboard x15,
|
|
and generates a barebone image.
|
|
|
|
The image must be flashed to a SD card to be used.
|
|
|
|
How to build it
|
|
===============
|
|
|
|
$ make beagleboardx15_defconfig
|
|
|
|
Then you can edit the build options using
|
|
|
|
$ make menuconfig
|
|
|
|
Compile all and build a sdcard image:
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
-------------------
|
|
|
|
After building, you should get a tree like this:
|
|
|
|
output/images/
|
|
├── am57xx-beagle-x15.dtb
|
|
├── am57xx-beagle-x15-revb1.dtb
|
|
├── boot.vfat
|
|
├── MLO
|
|
├── rootfs.ext2
|
|
├── rootfs.ext4
|
|
├── rootfs.tar
|
|
├── sdcard.img
|
|
├── u-boot.img
|
|
├── u-boot-spl.bin
|
|
└── zImage
|
|
|
|
How to write the microSD card
|
|
=============================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|