286628bcc2
Lichee RV - Nezha CM is a compute module with modular design, equipped with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM. Board support is based on the nezha defconfig already available in buildroot. https://wiki.sipeed.com/hardware/en/lichee/RV/RV.html https://linux-sunxi.org/Sipeed_Lichee_RV Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com> Reviewed-by: Indrek Kruusa <indrek.kruusa@gmail.com> Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> |
||
---|---|---|
.. | ||
overlay/boot/extlinux | ||
genimage.cfg | ||
readme.txt |
Lichee RV =============== Lichee RV - Nezha CM is a compute module with modular design, equipped with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM. It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin connectors to route all IO, making it convient for wide use and easy to replace. How to build ============ $ make sipeed_lichee_rv_defconfig $ make How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX Connect a TTL UART to the debug connector, insert the microSD card and plug in a USB-C cable to the PWR connector to boot the system.