NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
72acd691fa
kumquat-buildroot/board/friendlyarm/nanopi-m1-plus
History
Chakra Divi b0a9ee07e4 board: Add support for nanopi-m1-plus 
Add initial support for nanopi-m1-plus board
with below features
- U-Boot 2017.07-rc3
    nanopi-m1-plus dts support is present in rc3 version
- Linux 4.11.5
- linux patches to add nanopi-m1-plus dts
- Default packages from buildroot

Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-07-23 11:30:14 +02:00
..
patches/linux board: Add support for nanopi-m1-plus 2017-07-23 11:30:14 +02:00
boot.cmd board: Add support for nanopi-m1-plus 2017-07-23 11:30:14 +02:00
genimage.cfg board: Add support for nanopi-m1-plus 2017-07-23 11:30:14 +02:00
readme.txt board: Add support for nanopi-m1-plus 2017-07-23 11:30:14 +02:00

readme.txt 

NanoPi M1 Plus

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the NanoPi M1 Plus. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make nanopi_m1_plus_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX