|
…
|
||
|---|---|---|
| .. | ||
| overlay/boot/extlinux | ||
| patches/linux | ||
| genimage.cfg | ||
| linux.config | ||
| readme.txt | ||
STM32MP157C-Odyssey
Intro
=====
This configuration supports the STM32MP157C-Odyssey platform:
https://wiki.seeedstudio.com/ODYSSEY-STM32MP157C/
How to build
============
$ make stm32mp157c_odyssey_defconfig
$ make
How to write the microSD card
=============================
Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.
Copy the bootable "sdcard.img" onto an microSD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Boot the board
==============
(1) Insert the microSD card in connector J21.
(2) Connect to the UART connector J24 (located next the the DC jack
J24 and the battery connector J20) and run your serial communication
program on /dev/ttyACM0.
(3) Plug a USB-C cable in J6 or a center-positive 12V jack into J17
to power-up the board.
(4) The system will start, with the console on UART.