68969dcbf0
Add initial support for Orangepi Zero3 board: - U-Boot 2021.07 fork by Orangepi - Linux 6.1.31 fork by Orangepi - Default packages from buildroot Enable CONFIG_MFD_AC200 as it is used directly by other module, resulting in build failure when disabled. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
35 lines
978 B
Plaintext
35 lines
978 B
Plaintext
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting with the
|
|
buildroot environment for the Orangepi Zero3. With the current configuration
|
|
it will bring-up the board, and allow access through the serial console.
|
|
|
|
Orangepi Zero3 link:
|
|
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
|
|
|
|
This configuration uses Orangepi's fork of U-Boot and Linux kernel.
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make orangepi_zero3_defconfig
|
|
$ make
|
|
|
|
Note: you will need access to the internet to download the required
|
|
sources.
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
$ sudo sync
|
|
|
|
Insert the micro SDcard in your Orangepi Zero3 and power it up. The console
|
|
is on the serial line, 115200 8N1.
|