NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
6e5f672139
kumquat-buildroot/board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
Julien Olivain 0f430f0062 configs/zynq_qmtech: new defconfig 
This patch add support for the low cost QMTECH XC7Z010 starter kit
board [1].

[1] http://www.chinaqmtech.com/xilinx_zynq_soc

Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-04-19 21:43:35 +02:00

419 lines
7.6 KiB
Diff
Raw Blame History

From 22d955122ac0f7ac74ab74aadebf6b8edaf0bbbd Mon Sep 17 00:00:00 2001
From: Julien Olivain <juju@cotds.org>
Date: Sun, 15 Dec 2019 18:45:40 +0100
Subject: [PATCH] DTS for QMTech Zynq starter kit
Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
Signed-off-by: Julien Olivain <juju@cotds.org>
---
arch/arm/boot/dts/zynq-qmtech.dts | 397 ++++++++++++++++++++++++++++++
1 file changed, 397 insertions(+)
create mode 100644 arch/arm/boot/dts/zynq-qmtech.dts
diff --git a/arch/arm/boot/dts/zynq-qmtech.dts b/arch/arm/boot/dts/zynq-qmtech.dts
new file mode 100644
index 000000000000..c6081dc0080e
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-qmtech.dts
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 - 2015 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ * Copyright (C) 2019 Martin Chabot <martin.chabot@gmail.com>
+ */
+
+/* Derived from:
+ * https://github.com/Xilinx/linux-xlnx/blob/xilinx-v2019.2.01/arch/arm/boot/dts/zynq-zc702.dts
+ */
+
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+ model = "QMTECH XC7Z010 Starter Kit";
+ compatible = "xlnx,zynq-qmtech", "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+ aliases {
+ ethernet0 = &gem0;
+ i2c0 = &i2c0;
+ serial0 = &uart1;
+ spi0 = &qspi;
+ mmc0 = &sdhci0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds23 {
+ label = "ds23";
+ gpios = <&gpio0 10 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+};
+
+&amba {
+ ocm: sram@fffc0000 {
+ compatible = "mmio-sram";
+ reg = <0xfffc0000 0x10000>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+ status = "disabled";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ scl-gpios = <&gpio0 50 0>;
+ sda-gpios = <&gpio0 51 0>;
+
+ i2c-mux@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ adv7511: hdmi-tx@39 {
+ compatible = "adi,adv7511";
+ reg = <0x39>;
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+ adi,input-style = <3>;
+ adi,input-justification = "right";
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ hwmon@52 {
+ compatible = "ti,ucd9248";
+ reg = <52>;
+ };
+ hwmon@53 {
+ compatible = "ti,ucd9248";
+ reg = <53>;
+ };
+ hwmon@54 {
+ compatible = "ti,ucd9248";
+ reg = <54>;
+ };
+ };
+ };
+};
+
+&pinctrl0 {
+ pinctrl_can0_default: can0-default {
+ mux {
+ function = "can0";
+ groups = "can0_9_grp";
+ };
+
+ conf {
+ groups = "can0_9_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO46";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO47";
+ bias-disable;
+ };
+ };
+
+ pinctrl_gem0_default: gem0-default {
+ mux {
+ function = "ethernet0";
+ groups = "ethernet0_0_grp";
+ };
+
+ conf {
+ groups = "ethernet0_0_grp";
+ slew-rate = <0>;
+ io-standard = <4>;
+ };
+
+ conf-rx {
+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+ bias-high-impedance;
+ low-power-disable;
+ };
+
+ conf-tx {
+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+ bias-disable;
+ low-power-enable;
+ };
+
+ mux-mdio {
+ function = "mdio0";
+ groups = "mdio0_0_grp";
+ };
+
+ conf-mdio {
+ groups = "mdio0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_gpio0_default: gpio0-default {
+ mux {
+ function = "gpio0";
+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+ "gpio0_13_grp", "gpio0_14_grp";
+ };
+
+ conf {
+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+ "gpio0_13_grp", "gpio0_14_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-pull-up {
+ pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+ bias-pull-up;
+ };
+
+ conf-pull-none {
+ pins = "MIO7", "MIO8";
+ bias-disable;
+ };
+ };
+
+ pinctrl_i2c0_default: i2c0-default {
+ mux {
+ groups = "i2c0_10_grp";
+ function = "i2c0";
+ };
+
+ conf {
+ groups = "i2c0_10_grp";
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ mux {
+ groups = "gpio0_50_grp", "gpio0_51_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_50_grp", "gpio0_51_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_sdhci0_default: sdhci0-default {
+ mux {
+ groups = "sdio0_2_grp";
+ function = "sdio0";
+ };
+
+ conf {
+ groups = "sdio0_2_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ bias-disable;
+ };
+
+ mux-cd {
+ groups = "gpio0_0_grp";
+ function = "sdio0_cd";
+ };
+
+ conf-cd {
+ groups = "gpio0_0_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ mux-wp {
+ groups = "gpio0_15_grp";
+ function = "sdio0_wp";
+ };
+
+ conf-wp {
+ groups = "gpio0_15_grp";
+ bias-high-impedance;
+ bias-pull-up;
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+ };
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_10_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO25";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO24";
+ bias-disable;
+ };
+ };
+};
+
+&qspi {
+ u-boot,dm-pre-reloc;
+ status = "disabled";
+ is-dual = <0>;
+ num-cs = <1>;
+ flash@0 {
+ compatible = "n25q128a11";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@qspi-fsbl-uboot {
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux {
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree {
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs {
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ partition@qspi-bitstream {
+ label = "qspi-bitstream";
+ reg = <0xC00000 0x400000>;
+ };
+ };
+};
+
+&sdhci0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&uart1 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+};
--
2.23.0
Reference in New Issue View Git Blame Copy Permalink