kumquat-buildroot/board/minnowboard
Ezequiel Garcia 36e83efc66 minnowboard-max: Start X on boot and run a few demos
Now that we've merged nodm, the autologin display manager, we can
get rid of xinit, and startx hack and use nodm to start X on boot.
While here, let's start xterm and glmark2, just as demos.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-04 17:04:16 +02:00
..
fs-overlay-graphical/etc minnowboard-max: Start X on boot and run a few demos 2016-07-04 17:04:16 +02:00
genimage.cfg
grub-minnowboard-max.cfg
grub-minnowboard.cfg
linux-3.8.config
linux-4.6.config
post-build.sh minnowboard-max: Enable serial and HDMI consoles 2016-06-28 13:56:25 +02:00
post-image.sh
readme.txt minnowboard-max: Enable serial and HDMI consoles 2016-06-28 13:56:25 +02:00

How to get started with the MinnowBoard (MAX)
=============================================

1. Build

  Apply the defconfig:

  $ make minnowboard_defconfig

  Or, for the Minnowboard MAX board:

  $ make minnowboard_max_defconfig

  Add any additional packages required and build:

  $ make

2. Write the SD card

  The build process will create a SD card image in output/images.
  Write the image to an mSD card, insert into the MinnowBoard
  and power the board on.

  $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync

  The system starts two consoles: one on the serial port
  and one on HDMI.

3. Enjoy

Additional information about this board can be found at
http://www.minnowboard.org/.