6d26c18aca
Add imx6q-sabresd_defconfig which supports imx6q-sabresd board using mainline U-Boot and mainline kernel. Keep freescale_imx6qsabresd_defconfig for those who want to run U-Boot and kernel versions from NXP. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
58 lines
1.4 KiB
Plaintext
58 lines
1.4 KiB
Plaintext
*******************************
|
|
Freescale i.MX6Q Sabre SD board
|
|
*******************************
|
|
|
|
This file documents the Buildroot support for the Freescale i.MX6Q Sabre SD
|
|
board.
|
|
|
|
This configuration uses U-Boot mainline and kernel mainline.
|
|
|
|
Build
|
|
=====
|
|
|
|
First, configure Buildroot for the i.MX6Q Sabre SD board:
|
|
|
|
make imx6q-sabresd_defconfig
|
|
|
|
Build all components:
|
|
|
|
make
|
|
|
|
You will find the following files in output/images/ :
|
|
- imx6q-sabresd.dtb
|
|
- rootfs.ext4
|
|
- rootfs.tar
|
|
- sdcard.img
|
|
- u-boot.imx
|
|
- zImage
|
|
|
|
Create a bootable SD card
|
|
=========================
|
|
|
|
To determine the device associated to the SD card have a look in the
|
|
/proc/partitions file:
|
|
|
|
cat /proc/partitions
|
|
|
|
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
directory, ready to be dumped on a SD card. Launch the following
|
|
command as root:
|
|
|
|
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
|
|
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
|
|
For details about the medium image layout, see the definition in
|
|
board/freescale/common/imx/genimage.cfg.template.
|
|
|
|
Boot the i.MX6Q Sabre SD board
|
|
==============================
|
|
|
|
To boot your newly created system:
|
|
- insert the SD card in the SD3 slot of the board (close to the HDMI connector);
|
|
- put a micro USB cable into the Debug USB Port and connect using a terminal
|
|
emulator at 115200 bps, 8n1;
|
|
- power on the board.
|
|
|
|
Enjoy!
|