f20589cbc7
STM32MP157C-Odyssey reference: https://wiki.seeedstudio.com/ODYSSEY-STM32MP157C/ Signed-off-by: Simon Doppler <dopsi@dopsi.ch> [Arnout: use default rootfs size, remove version-specific dir from patch] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
39 lines
919 B
Plaintext
39 lines
919 B
Plaintext
STM32MP157C-Odyssey
|
|
|
|
Intro
|
|
=====
|
|
|
|
This configuration supports the STM32MP157C-Odyssey platform:
|
|
|
|
https://wiki.seeedstudio.com/ODYSSEY-STM32MP157C/
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make stm32mp157c_odyssey_defconfig
|
|
$ make
|
|
|
|
How to write the microSD card
|
|
=============================
|
|
|
|
Once the build process is finished you will have an image called
|
|
"sdcard.img" in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an microSD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Boot the board
|
|
==============
|
|
|
|
(1) Insert the microSD card in connector J21.
|
|
|
|
(2) Connect to the UART connector J24 (located next the the DC jack
|
|
J24 and the battery connector J20) and run your serial communication
|
|
program on /dev/ttyACM0.
|
|
|
|
(3) Plug a USB-C cable in J6 or a center-positive 12V jack into J17
|
|
to power-up the board.
|
|
|
|
(4) The system will start, with the console on UART.
|