NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
6029a25a90
kumquat-buildroot/linux/linux.mk
Yann E. MORIN 20b1446669 linux/tools: make it a real, separate package 
The kernel source tree also contains the sources for various userland
tools, of which cpupower, perf or selftests.

Currently, we have support for building those tools as part of the
kernel build procedure. This looked the correct thing to do so far,
because, well, they *are* part of the kernel source tree and some
really have to be the same version as the kernel that will run.

However, this is causing quite a non-trivial-to-break circular
dependency in some configurations. For example, this defconfig fails to
build (similar to the one reported by Paul):

    BR2_arm=y
    BR2_cortex_a7=y
    BR2_ARM_FPU_NEON_VFPV4=y
    BR2_TOOLCHAIN_EXTERNAL=y
    BR2_INIT_SYSTEMD=y
    BR2_LINUX_KERNEL=y
    BR2_LINUX_KERNEL_CUSTOM_GIT=y
    BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
    BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="26f3b72a9c049be10e6af196252283e1f6ab9d1f"
    BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
    BR2_PACKAGE_LINUX_TOOLS_CPUPOWER=y
    BR2_PACKAGE_CRYPTODEV=y
    BR2_PACKAGE_OPENSSL=y
    BR2_PACKAGE_LIBCURL=y

This causes a circular dependency, as explained by Thomas:

 - When libcurl is enabled, systemd depends on it

 - When OpenSSL is enabled, obviously, will use it for SSL support

 - When cryptodev-linux is enabled, OpenSSL will depend on it to use
   crypto accelerators supported in the kernel via cryptodev-linux.

 - cryptodev-linux being a kernel module, it depends on linux

 - linux by itself (the kernel) does not depend on pciutils, but the
   linux tool "cpupower" (managed in linux-tool-cpupower) depends on
   pciutils

 - pciutils depends on udev when available

 - udev is provided by systemd.

And indeed, during the build, we can see that make warns (it's only
reported as a *warning*, not as an actual error):

    [...]
    make[1]: Circular /home/ymorin/dev/buildroot/O/build/openssl-1.0.2h/.stamp_configured
    <- cryptodev-linux dependency dropped.
    >>> openssl 1.0.2h Downloading
    [...]

So the build fails later on, when openssl is actually built:

    eng_cryptodev.c:57:31: fatal error: crypto/cryptodev.h: No such file or directory
    compilation terminated.
    <builtin>: recipe for target 'eng_cryptodev.o' failed

Furthermore, graph-depends also detects the circular dependency, but
treats it as a hard-error:

    Recursion detected for  : cryptodev-linux
    which is a dependency of: openssl
    which is a dependency of: libcurl
    which is a dependency of: systemd
    which is a dependency of: udev
    which is a dependency of: pciutils
    which is a dependency of: linux
    which is a dependency of: cryptodev-linux
    Makefile:738: recipe for target 'graph-depends' failed

Of course, there is no way to break the loop without losing
functionality in either one of the involved packages *and* keep
our infrastructure and packages as-is.

The only solution is to break the loop at the linux-tools level, by
moving them away into their own package, so that the linux package will
no longer have the opportunity to depend on another package via a
dependency of one the tools.

All three linux tools are thus moved away to their own package.

The package infrastructure only knows of three types of packages: those
in package/ , in boot/ , in toolchain/ and the one in linux/ . So we
create that new linux-tools package in package/ so that we don't have to
fiddle with yet another special case in the infra. Still, we want its
configure options to appear in the kernel's sub-menu.

So, we make it a prompt-less package, with only the tools visible as
options of that package, but without the usual dependency on their
master symbol; they only depend on the Linux kernel.

Furthermore, because the kernel is such a huge pile of code, we would
not be very happy to extract it a second time just for the sake of a few
tools. We can't extract only the tools/ sub-directory from the kernel
source either, because some tools have hard-coded path to includes from
the kernel (arch and stuff).

Instead, we just use the linux source tree as our own build tree, and
ensure the linux tree is extracted and patched before linux-tools is
configured and built.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Paul Ashford <paul.ashford@zurria.co.uk>
[Thomas:
 - fix typo #(@D) -> $(@D)
 - fix the inclusion of the per-tool .mk files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-09-22 12:32:34 +02:00

465 lines
18 KiB
Makefile
Raw Blame History

################################################################################
#
# Linux kernel target
#
################################################################################
LINUX_VERSION = $(call qstrip,$(BR2_LINUX_KERNEL_VERSION))
LINUX_LICENSE = GPLv2
LINUX_LICENSE_FILES = COPYING
define LINUX_HELP_CMDS
@echo ' linux-menuconfig - Run Linux kernel menuconfig'
@echo ' linux-savedefconfig - Run Linux kernel savedefconfig'
@echo ' linux-update-defconfig - Save the Linux configuration to the path specified'
@echo ' by BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE'
endef
# Compute LINUX_SOURCE and LINUX_SITE from the configuration
ifeq ($(BR2_LINUX_KERNEL_CUSTOM_TARBALL),y)
LINUX_TARBALL = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION))
LINUX_SITE = $(patsubst %/,%,$(dir $(LINUX_TARBALL)))
LINUX_SOURCE = $(notdir $(LINUX_TARBALL))
BR_NO_CHECK_HASH_FOR += $(LINUX_SOURCE)
else ifeq ($(BR2_LINUX_KERNEL_CUSTOM_GIT),y)
LINUX_SITE = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_REPO_URL))
LINUX_SITE_METHOD = git
else ifeq ($(BR2_LINUX_KERNEL_CUSTOM_HG),y)
LINUX_SITE = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_REPO_URL))
LINUX_SITE_METHOD = hg
else ifeq ($(BR2_LINUX_KERNEL_CUSTOM_SVN),y)
LINUX_SITE = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_REPO_URL))
LINUX_SITE_METHOD = svn
else
LINUX_SOURCE = linux-$(LINUX_VERSION).tar.xz
ifeq ($(BR2_LINUX_KERNEL_CUSTOM_VERSION),y)
BR_NO_CHECK_HASH_FOR += $(LINUX_SOURCE)
endif
# In X.Y.Z, get X and Y. We replace dots and dashes by spaces in order
# to use the $(word) function. We support versions such as 4.0, 3.1,
# 2.6.32, 2.6.32-rc1, 3.0-rc6, etc.
ifeq ($(findstring x2.6.,x$(LINUX_VERSION)),x2.6.)
LINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/kernel/v2.6
else ifeq ($(findstring x3.,x$(LINUX_VERSION)),x3.)
LINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/kernel/v3.x
else ifeq ($(findstring x4.,x$(LINUX_VERSION)),x4.)
LINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/kernel/v4.x
endif
# release candidates are in testing/ subdir
ifneq ($(findstring -rc,$(LINUX_VERSION)),)
LINUX_SITE := $(LINUX_SITE)/testing
endif # -rc
endif
LINUX_PATCHES = $(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
# We rely on the generic package infrastructure to download and apply
# remote patches (downloaded from ftp, http or https). For local
# patches, we can't rely on that infrastructure, because there might
# be directories in the patch list (unlike for other packages).
LINUX_PATCH = $(filter ftp://% http://% https://%,$(LINUX_PATCHES))
LINUX_INSTALL_IMAGES = YES
LINUX_DEPENDENCIES += host-kmod
# host tools needed for kernel compression
ifeq ($(BR2_LINUX_KERNEL_LZ4),y)
LINUX_DEPENDENCIES += host-lz4
else ifeq ($(BR2_LINUX_KERNEL_LZMA),y)
LINUX_DEPENDENCIES += host-lzma
else ifeq ($(BR2_LINUX_KERNEL_LZO),y)
LINUX_DEPENDENCIES += host-lzop
else ifeq ($(BR2_LINUX_KERNEL_XZ),y)
LINUX_DEPENDENCIES += host-xz
endif
LINUX_COMPRESSION_OPT_$(BR2_LINUX_KERNEL_GZIP) = CONFIG_KERNEL_GZIP
LINUX_COMPRESSION_OPT_$(BR2_LINUX_KERNEL_LZ4) = CONFIG_KERNEL_LZ4
LINUX_COMPRESSION_OPT_$(BR2_LINUX_KERNEL_LZMA) = CONFIG_KERNEL_LZMA
LINUX_COMPRESSION_OPT_$(BR2_LINUX_KERNEL_LZO) = CONFIG_KERNEL_LZO
LINUX_COMPRESSION_OPT_$(BR2_LINUX_KERNEL_XZ) = CONFIG_KERNEL_XZ
ifeq ($(BR2_LINUX_KERNEL_UBOOT_IMAGE),y)
LINUX_DEPENDENCIES += host-uboot-tools
endif
LINUX_MAKE_FLAGS = \
HOSTCC="$(HOSTCC)" \
HOSTCFLAGS="$(HOSTCFLAGS)" \
ARCH=$(KERNEL_ARCH) \
INSTALL_MOD_PATH=$(TARGET_DIR) \
CROSS_COMPILE="$(TARGET_CROSS)" \
DEPMOD=$(HOST_DIR)/sbin/depmod
LINUX_MAKE_ENV = \
$(TARGET_MAKE_ENV) \
BR_BINARIES_DIR=$(BINARIES_DIR)
# Get the real Linux version, which tells us where kernel modules are
# going to be installed in the target filesystem.
LINUX_VERSION_PROBED = `$(MAKE) $(LINUX_MAKE_FLAGS) -C $(LINUX_DIR) --no-print-directory -s kernelrelease 2>/dev/null`
ifeq ($(BR2_LINUX_KERNEL_USE_INTREE_DTS),y)
KERNEL_DTS_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_INTREE_DTS_NAME))
else ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_DTS),y)
# We keep only the .dts files, so that the user can specify both .dts
# and .dtsi files in BR2_LINUX_KERNEL_CUSTOM_DTS_PATH. Both will be
# copied to arch/<arch>/boot/dts, but only the .dts files will
# actually be generated as .dtb.
KERNEL_DTS_NAME = $(basename $(filter %.dts,$(notdir $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH)))))
endif
KERNEL_DTBS = $(addsuffix .dtb,$(KERNEL_DTS_NAME))
ifeq ($(BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM),y)
LINUX_IMAGE_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_NAME))
LINUX_TARGET_NAME = $(call qstrip,$(BR2_LINUX_KERNEL_IMAGE_TARGET_NAME))
ifeq ($(LINUX_IMAGE_NAME),)
LINUX_IMAGE_NAME = $(LINUX_TARGET_NAME)
endif
else
ifeq ($(BR2_LINUX_KERNEL_UIMAGE),y)
LINUX_IMAGE_NAME = uImage
else ifeq ($(BR2_LINUX_KERNEL_APPENDED_UIMAGE),y)
LINUX_IMAGE_NAME = uImage
else ifeq ($(BR2_LINUX_KERNEL_BZIMAGE),y)
LINUX_IMAGE_NAME = bzImage
else ifeq ($(BR2_LINUX_KERNEL_ZIMAGE),y)
LINUX_IMAGE_NAME = zImage
else ifeq ($(BR2_LINUX_KERNEL_ZIMAGE_EPAPR),y)
LINUX_IMAGE_NAME = zImage.epapr
else ifeq ($(BR2_LINUX_KERNEL_APPENDED_ZIMAGE),y)
LINUX_IMAGE_NAME = zImage
else ifeq ($(BR2_LINUX_KERNEL_CUIMAGE),y)
LINUX_IMAGE_NAME = cuImage.$(KERNEL_DTS_NAME)
else ifeq ($(BR2_LINUX_KERNEL_SIMPLEIMAGE),y)
LINUX_IMAGE_NAME = simpleImage.$(KERNEL_DTS_NAME)
else ifeq ($(BR2_LINUX_KERNEL_IMAGE),y)
LINUX_IMAGE_NAME = Image
else ifeq ($(BR2_LINUX_KERNEL_LINUX_BIN),y)
LINUX_IMAGE_NAME = linux.bin
else ifeq ($(BR2_LINUX_KERNEL_VMLINUX_BIN),y)
LINUX_IMAGE_NAME = vmlinux.bin
else ifeq ($(BR2_LINUX_KERNEL_VMLINUX),y)
LINUX_IMAGE_NAME = vmlinux
else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ),y)
LINUX_IMAGE_NAME = vmlinuz
else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ_BIN),y)
LINUX_IMAGE_NAME = vmlinuz.bin
endif
# The if-else blocks above are all the image types we know of, and all
# come from a Kconfig choice, so we know we have LINUX_IMAGE_NAME set
# to something
LINUX_TARGET_NAME = $(LINUX_IMAGE_NAME)
endif
LINUX_KERNEL_UIMAGE_LOADADDR = $(call qstrip,$(BR2_LINUX_KERNEL_UIMAGE_LOADADDR))
ifneq ($(LINUX_KERNEL_UIMAGE_LOADADDR),)
LINUX_MAKE_FLAGS += LOADADDR="$(LINUX_KERNEL_UIMAGE_LOADADDR)"
endif
# Compute the arch path, since i386 and x86_64 are in arch/x86 and not
# in arch/$(KERNEL_ARCH). Even if the kernel creates symbolic links
# for bzImage, arch/i386 and arch/x86_64 do not exist when copying the
# defconfig file.
ifeq ($(KERNEL_ARCH),i386)
KERNEL_ARCH_PATH = $(LINUX_DIR)/arch/x86
else ifeq ($(KERNEL_ARCH),x86_64)
KERNEL_ARCH_PATH = $(LINUX_DIR)/arch/x86
else
KERNEL_ARCH_PATH = $(LINUX_DIR)/arch/$(KERNEL_ARCH)
endif
ifeq ($(BR2_LINUX_KERNEL_VMLINUX),y)
LINUX_IMAGE_PATH = $(LINUX_DIR)/$(LINUX_IMAGE_NAME)
else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ),y)
LINUX_IMAGE_PATH = $(LINUX_DIR)/$(LINUX_IMAGE_NAME)
else ifeq ($(BR2_LINUX_KERNEL_VMLINUZ_BIN),y)
LINUX_IMAGE_PATH = $(LINUX_DIR)/$(LINUX_IMAGE_NAME)
else
LINUX_IMAGE_PATH = $(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
endif # BR2_LINUX_KERNEL_VMLINUX
define LINUX_APPLY_LOCAL_PATCHES
for p in $(filter-out ftp://% http://% https://%,$(LINUX_PATCHES)) ; do \
if test -d $$p ; then \
$(APPLY_PATCHES) $(@D) $$p \*.patch || exit 1 ; \
else \
$(APPLY_PATCHES) $(@D) `dirname $$p` `basename $$p` || exit 1; \
fi \
done
endef
LINUX_POST_PATCH_HOOKS += LINUX_APPLY_LOCAL_PATCHES
# Older linux kernels use deprecated perl constructs in timeconst.pl
# that were removed for perl 5.22+ so it breaks on newer distributions
# Try a dry-run patch to see if this applies, if it does go ahead
define LINUX_TRY_PATCH_TIMECONST
@if patch -p1 --dry-run -f -s -d $(@D) <$(LINUX_PKGDIR)/0001-timeconst.pl-Eliminate-Perl-warning.patch.conditional >/dev/null ; then \
$(APPLY_PATCHES) $(@D) $(LINUX_PKGDIR) 0001-timeconst.pl-Eliminate-Perl-warning.patch.conditional ; \
fi
endef
LINUX_POST_PATCH_HOOKS += LINUX_TRY_PATCH_TIMECONST
ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
LINUX_KCONFIG_DEFCONFIG = $(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG))_defconfig
else ifeq ($(BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG),y)
LINUX_KCONFIG_DEFCONFIG = defconfig
else ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
LINUX_KCONFIG_FILE = $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE))
endif
LINUX_KCONFIG_FRAGMENT_FILES = $(call qstrip,$(BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES))
LINUX_KCONFIG_EDITORS = menuconfig xconfig gconfig nconfig
LINUX_KCONFIG_OPTS = $(LINUX_MAKE_FLAGS)
# If no package has yet set it, set it from the Kconfig option
LINUX_NEEDS_MODULES ?= $(BR2_LINUX_NEEDS_MODULES)
# Make sure the Linux kernel is built with the right endianness. Not
# all architectures support
# CONFIG_CPU_BIG_ENDIAN/CONFIG_CPU_LITTLE_ENDIAN in Linux, but the
# option will be thrown away and ignored if it doesn't exist.
ifeq ($(BR2_ENDIAN),"BIG")
define LINUX_FIXUP_CONFIG_ENDIANNESS
$(call KCONFIG_ENABLE_OPT,CONFIG_CPU_BIG_ENDIAN,$(@D)/.config)
endef
else
define LINUX_FIXUP_CONFIG_ENDIANNESS
$(call KCONFIG_ENABLE_OPT,CONFIG_CPU_LITTLE_ENDIAN,$(@D)/.config)
endef
endif
define LINUX_KCONFIG_FIXUP_CMDS
$(if $(LINUX_NEEDS_MODULES),
$(call KCONFIG_ENABLE_OPT,CONFIG_MODULES,$(@D)/.config))
$(call KCONFIG_ENABLE_OPT,$(LINUX_COMPRESSION_OPT_y),$(@D)/.config)
$(foreach opt, $(LINUX_COMPRESSION_OPT_),
$(call KCONFIG_DISABLE_OPT,$(opt),$(@D)/.config)
)
$(LINUX_FIXUP_CONFIG_ENDIANNESS)
$(if $(BR2_arm)$(BR2_armeb),
$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config))
$(if $(BR2_TARGET_ROOTFS_CPIO),
$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(@D)/.config))
# As the kernel gets compiled before root filesystems are
# built, we create a fake cpio file. It'll be
# replaced later by the real cpio archive, and the kernel will be
# rebuilt using the linux-rebuild-with-initramfs target.
$(if $(BR2_TARGET_ROOTFS_INITRAMFS),
touch $(BINARIES_DIR)/rootfs.cpio
$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_SOURCE,"$${BR_BINARIES_DIR}/rootfs.cpio",$(@D)/.config)
$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_UID,0,$(@D)/.config)
$(call KCONFIG_SET_OPT,CONFIG_INITRAMFS_ROOT_GID,0,$(@D)/.config))
$(if $(BR2_ROOTFS_DEVICE_CREATION_STATIC),,
$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(@D)/.config))
$(if $(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV),
$(call KCONFIG_ENABLE_OPT,CONFIG_INOTIFY_USER,$(@D)/.config))
$(if $(BR2_PACKAGE_KTAP),
$(call KCONFIG_ENABLE_OPT,CONFIG_DEBUG_FS,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_ENABLE_DEFAULT_TRACERS,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_PERF_EVENTS,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_FUNCTION_TRACER,$(@D)/.config))
$(if $(BR2_PACKAGE_SYSTEMD),
$(call KCONFIG_ENABLE_OPT,CONFIG_CGROUPS,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_INOTIFY_USER,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_FHANDLE,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_AUTOFS4_FS,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_TMPFS_POSIX_ACL,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_TMPFS_POSIX_XATTR,$(@D)/.config))
$(if $(BR2_PACKAGE_SMACK),
$(call KCONFIG_ENABLE_OPT,CONFIG_SECURITY,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_SECURITY_SMACK,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_SECURITY_NETWORK,$(@D)/.config))
$(if $(BR2_PACKAGE_IPTABLES),
$(call KCONFIG_ENABLE_OPT,CONFIG_IP_NF_IPTABLES,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_IP_NF_FILTER,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_NETFILTER,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_NETFILTER_XTABLES,$(@D)/.config))
$(if $(BR2_PACKAGE_XTABLES_ADDONS),
$(call KCONFIG_ENABLE_OPT,CONFIG_NETFILTER_ADVANCED,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_NF_CONNTRACK,$(@D)/.config)
$(call KCONFIG_ENABLE_OPT,CONFIG_NF_CONNTRACK_MARK,$(@D)/.config))
$(if $(BR2_LINUX_KERNEL_APPENDED_DTB),
$(call KCONFIG_ENABLE_OPT,CONFIG_ARM_APPENDED_DTB,$(@D)/.config))
$(if $(BR2_PACKAGE_KERNEL_MODULE_IMX_GPU_VIV),
$(call KCONFIG_DISABLE_OPT,CONFIG_MXC_GPU_VIV,$(@D)/.config))
endef
ifeq ($(BR2_LINUX_KERNEL_DTS_SUPPORT),y)
ifeq ($(BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT),)
define LINUX_BUILD_DTB
$(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(KERNEL_DTBS)
endef
ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),)
define LINUX_INSTALL_DTB
# dtbs moved from arch/<ARCH>/boot to arch/<ARCH>/boot/dts since 3.8-rc1
cp $(addprefix \
$(KERNEL_ARCH_PATH)/boot/$(if $(wildcard \
$(addprefix $(KERNEL_ARCH_PATH)/boot/dts/,$(KERNEL_DTBS))),dts/),$(KERNEL_DTBS)) \
$(1)
endef
endif # BR2_LINUX_KERNEL_APPENDED_DTB
endif # BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT
endif # BR2_LINUX_KERNEL_DTS_SUPPORT
ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),y)
# dtbs moved from arch/$ARCH/boot to arch/$ARCH/boot/dts since 3.8-rc1
define LINUX_APPEND_DTB
(cd $(KERNEL_ARCH_PATH)/boot; \
for dtb in $(KERNEL_DTS_NAME); do \
if test -e $${dtb}.dtb ; then \
dtbpath=$${dtb}.dtb ; \
else \
dtbpath=dts/$${dtb}.dtb ; \
fi ; \
cat zImage $${dtbpath} > zImage.$${dtb} || exit 1; \
done)
endef
ifeq ($(BR2_LINUX_KERNEL_APPENDED_UIMAGE),y)
# We need to generate a new u-boot image that takes into
# account the extra-size added by the device tree at the end
# of the image. To do so, we first need to retrieve both load
# address and entry point for the kernel from the already
# generate uboot image before using mkimage -l.
LINUX_APPEND_DTB += ; \
MKIMAGE_ARGS=`$(MKIMAGE) -l $(LINUX_IMAGE_PATH) |\
sed -n -e 's/Image Name:[ ]*\(.*\)/-n \1/p' -e 's/Load Address:/-a/p' -e 's/Entry Point:/-e/p'`; \
for dtb in $(KERNEL_DTS_NAME); do \
$(MKIMAGE) -A $(MKIMAGE_ARCH) -O linux \
-T kernel -C none $${MKIMAGE_ARGS} \
-d $(KERNEL_ARCH_PATH)/boot/zImage.$${dtb} $(LINUX_IMAGE_PATH).$${dtb}; \
done
endif
endif
# Compilation. We make sure the kernel gets rebuilt when the
# configuration has changed.
define LINUX_BUILD_CMDS
$(if $(BR2_LINUX_KERNEL_USE_CUSTOM_DTS),
cp -f $(call qstrip,$(BR2_LINUX_KERNEL_CUSTOM_DTS_PATH)) $(KERNEL_ARCH_PATH)/boot/dts/)
$(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
@if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \
$(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) modules ; \
fi
$(LINUX_BUILD_DTB)
$(LINUX_APPEND_DTB)
endef
ifeq ($(BR2_LINUX_KERNEL_APPENDED_DTB),y)
# When a DTB was appended, install the potential several images with
# appended DTBs.
define LINUX_INSTALL_IMAGE
mkdir -p $(1)
cp $(KERNEL_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME).* $(1)
endef
else
# Otherwise, just install the unique image generated by the kernel
# build process.
define LINUX_INSTALL_IMAGE
$(INSTALL) -m 0644 -D $(LINUX_IMAGE_PATH) $(1)/$(LINUX_IMAGE_NAME)
endef
endif
ifeq ($(BR2_LINUX_KERNEL_INSTALL_TARGET),y)
define LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET
$(call LINUX_INSTALL_IMAGE,$(TARGET_DIR)/boot)
$(call LINUX_INSTALL_DTB,$(TARGET_DIR)/boot)
endef
endif
define LINUX_INSTALL_HOST_TOOLS
# Installing dtc (device tree compiler) as host tool, if selected
if grep -q "CONFIG_DTC=y" $(@D)/.config; then \
$(INSTALL) -D -m 0755 $(@D)/scripts/dtc/dtc $(HOST_DIR)/usr/bin/linux-dtc ; \
if [ ! -e $(HOST_DIR)/usr/bin/dtc ]; then \
ln -sf linux-dtc $(HOST_DIR)/usr/bin/dtc ; \
fi \
fi
endef
define LINUX_INSTALL_IMAGES_CMDS
$(call LINUX_INSTALL_IMAGE,$(BINARIES_DIR))
$(call LINUX_INSTALL_DTB,$(BINARIES_DIR))
endef
ifeq ($(BR2_STRIP_strip),y)
LINUX_MAKE_FLAGS += INSTALL_MOD_STRIP=1
endif
define LINUX_INSTALL_TARGET_CMDS
$(LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET)
# Install modules and remove symbolic links pointing to build
# directories, not relevant on the target
@if grep -q "CONFIG_MODULES=y" $(@D)/.config; then \
$(LINUX_MAKE_ENV) $(MAKE1) $(LINUX_MAKE_FLAGS) -C $(@D) modules_install; \
rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/build ; \
rm -f $(TARGET_DIR)/lib/modules/$(LINUX_VERSION_PROBED)/source ; \
fi
$(LINUX_INSTALL_HOST_TOOLS)
endef
# Include all our extensions.
#
# Note: our package infrastructure uses the full-path of the last-scanned
# Makefile to determine what package we're currently defining, using the
# last directory component in the path. As such, including other Makefile,
# like below, before we call one of the *-package macro is usally not
# working.
# However, since the files we include here are in the same directory as
# the current Makefile, we are OK. But this is a hard requirement: files
# included here *must* be in the same directory!
include $(sort $(wildcard linux/linux-ext-*.mk))
LINUX_PATCH_DEPENDENCIES += $(foreach ext,$(LINUX_EXTENSIONS),\
$(if $(BR2_LINUX_KERNEL_EXT_$(call UPPERCASE,$(ext))),$(ext)))
LINUX_PRE_PATCH_HOOKS += $(foreach ext,$(LINUX_EXTENSIONS),\
$(if $(BR2_LINUX_KERNEL_EXT_$(call UPPERCASE,$(ext))),\
$(call UPPERCASE,$(ext))_PREPARE_KERNEL))
# Checks to give errors that the user can understand
ifeq ($(BR_BUILDING),y)
ifeq ($(BR2_LINUX_KERNEL_USE_DEFCONFIG),y)
# We must use the user-supplied kconfig value, because
# LINUX_KCONFIG_DEFCONFIG will at least contain the
# trailing _defconfig
ifeq ($(call qstrip,$(BR2_LINUX_KERNEL_DEFCONFIG)),)
$(error No kernel defconfig name specified, check your BR2_LINUX_KERNEL_DEFCONFIG setting)
endif
endif
ifeq ($(BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG),y)
ifeq ($(LINUX_KCONFIG_FILE),)
$(error No kernel configuration file specified, check your BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE setting)
endif
endif
ifeq ($(BR2_LINUX_KERNEL_DTS_SUPPORT)$(KERNEL_DTS_NAME),y)
$(error No kernel device tree source specified, check your \
BR2_LINUX_KERNEL_USE_INTREE_DTS / BR2_LINUX_KERNEL_USE_CUSTOM_DTS settings)
endif
endif # BR_BUILDING
$(eval $(kconfig-package))
# Support for rebuilding the kernel after the cpio archive has
# been generated in $(BINARIES_DIR)/rootfs.cpio.
$(LINUX_DIR)/.stamp_initramfs_rebuilt: $(LINUX_DIR)/.stamp_target_installed $(LINUX_DIR)/.stamp_images_installed $(BINARIES_DIR)/rootfs.cpio
@$(call MESSAGE,"Rebuilding kernel with initramfs")
# Build the kernel.
$(LINUX_MAKE_ENV) $(MAKE) $(LINUX_MAKE_FLAGS) -C $(@D) $(LINUX_TARGET_NAME)
$(LINUX_APPEND_DTB)
# Copy the kernel image(s) to its(their) final destination
$(call LINUX_INSTALL_IMAGE,$(BINARIES_DIR))
# If there is a .ub file copy it to the final destination
test ! -f $(LINUX_IMAGE_PATH).ub || cp $(LINUX_IMAGE_PATH).ub $(BINARIES_DIR)
$(Q)touch $@
# The initramfs building code must make sure this target gets called
# after it generated the initramfs list of files.
linux-rebuild-with-initramfs: $(LINUX_DIR)/.stamp_initramfs_rebuilt
Reference in New Issue View Git Blame Copy Permalink