0ad1067db5
The board support package includes the following components:
- U-Boot 2016.11
- Linux 4.9.3
- packages:
- alsa-utils for basic audio usage of the on-board headphone jack
and microphone
- iw and wpa_supplicant for managing the wireless interface
Two Linux patches are necessary to enable audio and wifi support. Both
patches are fetched from the Linux next branch and are probably mainlined in
Linux 4.11.
A Linux configuration fragment enables the wireless device driver, which
is not enabled by default in the mainline defconfig of the board.
The wifi chip needs a NVRAM configuration file which is provided in the
rootfs overlay.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: remove e2fsprogs from the target packages, add entry in
DEVELOPERS file, remove C++ support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
57 lines
1.1 KiB
Plaintext
57 lines
1.1 KiB
Plaintext
#AP6210_NVRAM_V1.2_03192013
|
|
manfid=0x2d0
|
|
prodid=0x492
|
|
vendid=0x14e4
|
|
devid=0x4343
|
|
boardtype=0x0598
|
|
|
|
# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
|
|
#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
|
|
boardrev=0x1307
|
|
boardnum=777
|
|
xtalfreq=26000
|
|
boardflags=0x80201
|
|
boardflags2=0x80
|
|
sromrev=3
|
|
wl0id=0x431b
|
|
macaddr=00:90:4c:07:71:12
|
|
aa2g=1
|
|
ag0=2
|
|
maxp2ga0=74
|
|
cck2gpo=0x2222
|
|
ofdm2gpo=0x44444444
|
|
mcs2gpo0=0x6666
|
|
mcs2gpo1=0x6666
|
|
pa0maxpwr=56
|
|
|
|
#P207 PA params
|
|
#pa0b0=5447
|
|
#pa0b1=-658
|
|
#pa0b2=-175
|
|
|
|
#Same PA params for P304,P305, P306, P307
|
|
|
|
pa0b0=5447
|
|
pa0b1=-607
|
|
pa0b2=-160
|
|
pa0itssit=62
|
|
pa1itssit=62
|
|
|
|
|
|
cckPwrOffset=5
|
|
ccode=0
|
|
rssismf2g=0xa
|
|
rssismc2g=0x3
|
|
rssisav2g=0x7
|
|
triso2g=0
|
|
noise_cal_enable_2g=0
|
|
noise_cal_po_2g=0
|
|
swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
|
|
temp_add=29767
|
|
temp_mult=425
|
|
|
|
btc_flags=0x6
|
|
btc_params0=5000
|
|
btc_params1=1000
|
|
btc_params6=63
|