NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5b308d137a
kumquat-buildroot/board/amarula/vyasa
History
Shyam Saini b0bae3bcc8 configs/amarula_vyasa_rk3288: adjust U-Boot config to boot larger kernel image 
Default value of CONFIG_SYS_BOOTM_LEN in u-boot causes board reset for
large uImage files, so add u-boot patch to increase the maximum kernel
image size.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-04-21 12:18:00 +02:00
..
patches/uboot configs/amarula_vyasa_rk3288: adjust U-Boot config to boot larger kernel image 2019-04-21 12:18:00 +02:00
extlinux.conf board: Add Vyasa RK3288 board support 2018-02-06 11:39:48 +01:00
genimage.cfg board: amarula: vyasa: Give raw space for falcon mode 2018-05-27 22:05:35 +02:00
linux_gmac.fragment board: Add Vyasa RK3288 board support 2018-02-06 11:39:48 +01:00
post-build.sh board: Add Vyasa RK3288 board support 2018-02-06 11:39:48 +01:00
readme.txt board: Add Vyasa RK3288 board support 2018-02-06 11:39:48 +01:00

readme.txt 

Vyasa RK3288
============

Vyasa is RK3288 based Single board computer with fully supported opensource software.

https://openedev.amarulasolutions.com/display/ODWIKI/Vyasa+RK3288

How to build it
===============

  $ make amarula_vyasa_rk3288_defconfig

Then you can edit the build options using

  $ make menuconfig

Compile all and build rootfs image:

  $ make

Prepare your SDCard
===================

Buildroot generates a ready-to-use SD card image that you can flash directly to
the card. The image will be in output/images/sdcard.img.
You can write this image directly to an SD card device (i.e. /dev/xxx):

  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
  $ sudo sync

Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.