397fe5cc0b
The "project" feature was designed to allow to several projects to be
built inside the same Buildroot source tree and allowing the toolchain
and non-configurable packages to be shared between the different
projects on the same architecture. While being interesting in theory,
this feature adds a level of complexity to Buildroot, both from an
user perspective and from a developer perspective, while one of the
main Buildroot strengh is to be simple. Moreover, this feature is only
seldomly used by our users.
From a user-level perspective, this for example allows to remove the
project_build_ARCH directory, which was very confusing. The
autotools-stamps directory is also removed, since these stamps are
back at their normal location.
Description of the changes involved :
* project/, directory removed
* Makefile
- Don't include project/Makefile.in and project/project.mk anymore
- Grab a copy of the contents of project/Makefile.in at the
location it was imported, but remove the definition related to
PROJECT_BUILD_DIR. The TARGET_DIR is now in
$(BUILD_DIR)/target_dir
- Remove the creation/removal of the $(PROJECT_BUILD_DIR) and
$(PROJECT_BUILD_DIR)/autotools-stamps directories
- Don't make world depends on target-host-info. This target was
defined by project/project.mk to customize /etc/issue,
/etc/hostname and create /etc/br-version depending on the
project definitions. We can of course imagine re-adding such a
feature later.
- Replace PROJECT_BUILD_DIR by BUILD_DIR everywhere
- Remove the update, log and lognr.$(PROJECT) target, they were
specific to the project feature.
* package/Makefile.autotools.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
- Move the INSTALL_TARGET and HOOK_POST_INSTALL stamps to the same
directory as the other stamps (i.e, in the package directory).
* package/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR for the location of the
configure cache
* package/at/at.mk,
package/busybox/busybox.mk,
package/busybox/initramfs.mk,
package/customize/customize.mk,
package/linux-fusion/linux-fusion.mk,
package/ltp-testsuite/ltp-testsuite.mk,
package/nfs-utils/nfs-utils.mk,
target/cpio/cpioroot.mk,
target/cramfs/cramfs.mk,
target/device/Atmel/DataFlashBoot/DataflashBoot.mk,
target/device/Atmel/Makefile.in,
target/device/Atmel/at91bootstrap/at91bootstrap.mk,
target/device/KwikByte/Makefile.in,
target/ext2/ext2root.mk,
target/initramfs/initramfs.mk,
target/iso9660/iso9660.mk,
target/jffs2/jffs2root.mk,
target/linux/Makefile.in,
target/romfs/romfs.mk,
target/squashfs/squashfsroot.mk,
target/tar/tarroot.mk,
target/ubifs/ubifsroot.mk
- Replace PROJECT_BUILD_DIR by BUILD_DIR
* target/device/Config.in
- Do not include project/Config.in anymore
* target/linux/Makefile.in.advanced
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Store the stamps file in $(STAMP_DIR) instead of
$(PROJECT_BUILD_DIR)/autotools-stamps
* target/u-boot/Makefile.in
- Replace PROJECT_BUILD_DIR by BUILD_DIR
- Remove $(PROJECT) from the U-Boot target binary name
- Remove the insertion in the configuration of the project name as
the hostname
- The u-boot-autoscript target now generates
$(U_BOOT_AUTOSCRIPT).img instead of
$(U_BOOT_AUTOSCRIPT).$(PROJECT)
* toolchain/gcc/gcc-uclibc-3.x.mk
toolchain/gcc/gcc-uclibc-4.x.mk
- Move the stamps files to $(STAMP_DIR)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
100 lines
3.1 KiB
Makefile
100 lines
3.1 KiB
Makefile
#############################################################
|
|
#
|
|
# Build the jffs2 root filesystem image
|
|
#
|
|
#############################################################
|
|
|
|
JFFS2_OPTS := -e $(BR2_TARGET_ROOTFS_JFFS2_EBSIZE)
|
|
SUMTOOL_OPTS := $(JFFS2_OPTS)
|
|
|
|
ifeq ($(BR2_TARGET_ROOTFS_JFFS2_PAD),y)
|
|
ifneq ($(strip $(BR2_TARGET_ROOTFS_JFFS2_PADSIZE)),0x0)
|
|
JFFS2_OPTS += --pad=$(strip $(BR2_TARGET_ROOTFS_JFFS2_PADSIZE))
|
|
else
|
|
JFFS2_OPTS += -p
|
|
endif
|
|
SUMTOOL_OPTS += -p
|
|
endif
|
|
|
|
ifeq ($(BR2_TARGET_ROOTFS_JFFS2_LE),y)
|
|
JFFS2_OPTS += -l
|
|
SUMTOOL_OPTS += -l
|
|
endif
|
|
|
|
ifeq ($(BR2_TARGET_ROOTFS_JFFS2_BE),y)
|
|
JFFS2_OPTS += -b
|
|
SUMTOOL_OPTS += -b
|
|
endif
|
|
|
|
JFFS2_OPTS += -s $(BR2_TARGET_ROOTFS_JFFS2_PAGESIZE)
|
|
ifeq ($(BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER),y)
|
|
JFFS2_OPTS += -n
|
|
SUMTOOL_OPTS += -n
|
|
endif
|
|
|
|
JFFS2_TARGET := $(call qstrip,$(BR2_TARGET_ROOTFS_JFFS2_OUTPUT))
|
|
ifneq ($(TARGET_DEVICE_TABLE),)
|
|
JFFS2_OPTS += -D $(TARGET_DEVICE_TABLE)
|
|
endif
|
|
|
|
|
|
#
|
|
# mtd-host is a dependency which builds a local copy of mkfs.jffs2 if it is needed.
|
|
# the actual build is done from package/mtd/mtd.mk and it sets the
|
|
# value of MKFS_JFFS2 to either the previously installed copy or the one
|
|
# just built.
|
|
#
|
|
$(JFFS2_TARGET): host-fakeroot makedevs mtd-host
|
|
# Use fakeroot to pretend all target binaries are owned by root
|
|
rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
|
touch $(BUILD_DIR)/.fakeroot.00000
|
|
cat $(BUILD_DIR)/.fakeroot* > $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
|
echo "chown -R 0:0 $(TARGET_DIR)" >> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
|
ifneq ($(TARGET_DEVICE_TABLE),)
|
|
# Use fakeroot to pretend to create all needed device nodes
|
|
echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" \
|
|
>> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
|
endif
|
|
# Use fakeroot so mkfs.jffs2 believes the previous fakery
|
|
ifneq ($(BR2_TARGET_ROOTFS_JFFS2_SUMMARY),)
|
|
echo "$(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $(JFFS2_TARGET).nosummary && " \
|
|
"$(SUMTOOL) $(SUMTOOL_OPTS) -i $(JFFS2_TARGET).nosummary -o $(JFFS2_TARGET) && " \
|
|
"rm $(JFFS2_TARGET).nosummary" \
|
|
>> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
|
else
|
|
echo "$(MKFS_JFFS2) $(JFFS2_OPTS) -d $(TARGET_DIR) -o $(JFFS2_TARGET)" \
|
|
>> $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
|
endif
|
|
chmod a+x $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
|
$(HOST_DIR)/usr/bin/fakeroot -- $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
|
-@rm -f $(BUILD_DIR)/_fakeroot.$(notdir $(JFFS2_TARGET))
|
|
@ls -l $(JFFS2_TARGET)
|
|
ifeq ($(BR2_JFFS2_TARGET_SREC),y)
|
|
$(TARGET_CROSS)objcopy -I binary -O srec --adjust-vma 0xa1000000 $(JFFS2_TARGET) $(JFFS2_TARGET).srec
|
|
@ls -l $(JFFS2_TARGET).srec
|
|
endif
|
|
|
|
JFFS2_COPYTO := $(call qstrip,$(BR2_TARGET_ROOTFS_JFFS2_COPYTO))
|
|
|
|
jffs2root: $(JFFS2_TARGET)
|
|
ifneq ($(JFFS2_COPYTO),)
|
|
@cp -f $(JFFS2_TARGET) $(JFFS2_COPYTO)
|
|
endif
|
|
|
|
jffs2root-source: mtd-host-source
|
|
|
|
jffs2root-clean: mtd-host-clean
|
|
-rm -f $(JFFS2_TARGET)
|
|
|
|
jffs2root-dirclean: mtd-host-dirclean
|
|
-rm -f $(JFFS2_TARGET)
|
|
|
|
#############################################################
|
|
#
|
|
# Toplevel Makefile options
|
|
#
|
|
#############################################################
|
|
ifeq ($(BR2_TARGET_ROOTFS_JFFS2),y)
|
|
TARGETS+=jffs2root
|
|
endif
|