NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5803bbd900
kumquat-buildroot/board/orangepi/orangepi-zero
History
Sergey Kuzminov 6e68ec6de0 board/orangepi/orangepi-zero: using PARTUUID to identify root filesystem 
The mmc block device number can vary, so passing a mmc block device to
specify the location of the rootfs is not a reliable
approach. Instead, use the root=PARTUUID=<uuid> mechanism, where the
uuid is found by U-Boot.

Signed-off-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-01-13 22:09:54 +01:00
..
patches/linux package: remove numbered subject from patches 2021-12-11 20:48:58 +01:00
boot.cmd board/orangepi/orangepi-zero: using PARTUUID to identify root filesystem 2022-01-13 22:09:54 +01:00
genimage.cfg
linux-extras.config
readme.txt

readme.txt 

OrangePi Zero

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi Zero. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make orangepi_zero_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX