|
…
|
||
|---|---|---|
| .. | ||
| rootfs_overlay/lib/firmware/brcm | ||
| extlinux.conf | ||
| genimage.cfg | ||
| post-build.sh | ||
| readme.txt | ||
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi Lite2. With the current configuration
it will bring-up the board, and allow access through the serial console.
Orangepi Lite2 link:
http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Lite-2.html
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2
How to build
============
$ make orangepi_lite2_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Orangepi Lite2 and power it up. The console
is on the serial line, 115200 8N1.
WiFi
====
# wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
(type password and enter)
# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
# udhcpc -i wlan0
# ping google.com