kumquat-buildroot/target/u-boot/Config.in
Peter Korsgaard 4683420c4c Kconfig: remove 'default n'
'default n' is the default, so there's no need to say it explicitly.
2008-07-17 20:01:44 +00:00

83 lines
2.0 KiB
Plaintext

config BR2_TARGET_UBOOT
bool "Das U-Boot Boot Monitor"
depends on !BR2_TARGET_AT91
help
Build "Das U-Boot" Boot Monitor
config BR2_TARGET_UBOOT_BOARDNAME
string "board name"
depends on BR2_TARGET_UBOOT
default "$(BOARD_NAME)"
help
One of U-Boot supported boards to be built.
This will be suffixed with _config to meet U-Boot standard naming.
config BR2_TARGET_UBOOT_CUSTOM_PATCH
string "custom patch"
depends on BR2_TARGET_UBOOT
help
If your board requires a custom patch, add the path to the file here.
Most users may leave this empty
config BR2_TARGET_UBOOT_SERVERIP
string "server ip"
depends on BR2_TARGET_UBOOT
default "10.175.196.221"
help
TFTP server ip address
config BR2_TARGET_UBOOT_IPADDR
string "ip address"
depends on BR2_TARGET_UBOOT
default "10.175.196.18"
help
Target ip address
config BR2_TARGET_UBOOT_GATEWAY
string "gateway ip"
depends on BR2_TARGET_UBOOT
default "10.175.196.1"
help
Gateway ip address
config BR2_TARGET_UBOOT_NETMASK
string "netmask"
depends on BR2_TARGET_UBOOT
default "255.255.255.0"
help
Network Mask
config BR2_TARGET_UBOOT_ETHADDR
string "ethernet address"
depends on BR2_TARGET_UBOOT
default "04:25:fe:ed:00:18"
help
Target MAC address for the ethernet interface.
This should be changed for production units
config BR2_TARGET_UBOOT_ETH1ADDR
string "ethernet 2 address"
depends on BR2_TARGET_UBOOT
depends on BR2_TARGET_AVR32
help
Target MAC address for the second ethernet interface.
config BR2_TARGET_UBOOT_SILENT
bool "silent console"
depends on BR2_TARGET_UBOOT
help
If the option has been enabled, the output can be
silenced by setting the environment variable "silent".
config BR2_TARGET_UBOOT_TOOL_MKIMAGE
bool "mkimage tool in target"
depends on BR2_TARGET_UBOOT
help
Install mkimage tool in target.
config BR2_TARGET_UBOOT_TOOL_ENV
bool "fw_printenv tool in target"
depends on BR2_TARGET_UBOOT
help
Install fw_printenv / fw_setenv tools in target.