|
…
|
||
|---|---|---|
| .. | ||
| extlinux.conf | ||
| genimage.cfg | ||
| post-build.sh | ||
| readme.txt | ||
Orangepi Rk3399 ================ http://www.orangepi.org/Orange%20Pi%20RK3399/ Build: ====== $ make orangepi_rk3399_defconfig $ make Files created in output directory ================================= output/images ├── bl31.elf ├── boot.vfat ├── extlinux ├── idbloader.img ├── Image ├── rk3399-orangepi.dtb ├── rootfs.ext2 ├── rootfs.ext4 -> rootfs.ext2 ├── rootfs.tar ├── sdcard.img ├── u-boot.bin └── u-boot.itb Creating bootable SD card: ========================== Simply invoke (as root) sudo dd if=output/images/sdcard.img of=/dev/sdX && sync Where X is your SD card device. Booting: ======== Orangepi-RK3399 by default boots from emmc. For SD card boot to happen, emmc should be empty. If emmc happens to have any bootable image then erase emmc so that bootrom will look for a proper image in SD. emmc can be erased once after booted into linux as shown in below link. https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html Serial console: --------------- Baudrate for this board is 1500000. Login: ------ Enter 'root' as login user, and the prompt is ready. https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/orangepi.html