5be42d8da3
The commit 689b9ac439 (package/rpi-firmware: rework boot/config file
handling) has split in two the property:
dtoverlay=miniuart-bt,krnbt=on
Into:
dtoverlay=miniuart-bt
dtoverlay=krnbt=on
The initial property contained the dtbo file miniuart-bt[1] and its
parameter krnbt=on[2][3].
The first syntax is correct while the second is not. The krnbt=on is not
a dtoverlay[4] but a dtparam[5]. Therefore the property dtparam must be
used instead.
This fixes:
# cat /sys/firmware/devicetree/base/chosen/user-warnings
Failed to load overlay 'krnbt=on'
[1]: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts
[2]: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts#L91
[3]: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/overlays/README#L213-L215
[4]: https://www.raspberrypi.com/documentation/computers/config_txt.html#dtoverlay
[5]: https://www.raspberrypi.com/documentation/computers/config_txt.html#dtparam
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
30 lines
924 B
Plaintext
30 lines
924 B
Plaintext
# Please note that this is only a sample, we recommend you to change it to fit
|
|
# your needs.
|
|
# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
|
|
# See http://buildroot.org/manual.html#rootfs-custom
|
|
# and http://elinux.org/RPiconfig for a description of config.txt syntax
|
|
|
|
start_file=start.elf
|
|
fixup_file=fixup.dat
|
|
|
|
kernel=zImage
|
|
|
|
# To use an external initramfs file
|
|
#initramfs rootfs.cpio.gz
|
|
|
|
# Disable overscan assuming the display supports displaying the full resolution
|
|
# If the text shown on the screen disappears off the edge, comment this out
|
|
disable_overscan=1
|
|
|
|
# How much memory in MB to assign to the GPU on Pi models having
|
|
# 256, 512 or 1024 MB total memory
|
|
gpu_mem_256=100
|
|
gpu_mem_512=100
|
|
gpu_mem_1024=100
|
|
|
|
# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
|
|
dtoverlay=miniuart-bt
|
|
|
|
# enable autoprobing of Bluetooth driver without need of hciattach/btattach
|
|
dtparam=krnbt=on
|