NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
4a6c5ab2c3
kumquat-buildroot/board/orangepi/orangepi-zero
History
Peter Korsgaard aabd7f6ad0 orangepi_zero_defconfig: bump linux to 4.19.3, u-boot to 2018.11 
4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
ondemand cpufreq govenor so the frequency is dynamically adjusted - So
enable it in linux-extra.config.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-11-23 10:48:03 +01:00
..
patches/linux board/orangepi: add basic support for orangepi-zero board 2017-06-08 21:23:38 +02:00
boot.cmd board/orangepi: add basic support for orangepi-zero board 2017-06-08 21:23:38 +02:00
genimage.cfg board/orangepi: add basic support for orangepi-zero board 2017-06-08 21:23:38 +02:00
linux-extras.config orangepi_zero_defconfig: bump linux to 4.19.3, u-boot to 2018.11 2018-11-23 10:48:03 +01:00
readme.txt board/orangepi: add basic support for orangepi-zero board 2017-06-08 21:23:38 +02:00

readme.txt 

OrangePi Zero

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the OrangePi Zero. With the current configuration
it will bring-up the board, and allow access through the serial console.

How to build it
===============

Configure Buildroot:

    $ make orangepi_zero_defconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX