34deac05a5
board with below features: - U-Boot 2019.01 - Linux 5.0 - Default packages from buildroot Signed-off-by: Aussedat Louis <aussedat.louis@gmail.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
38 lines
1001 B
Plaintext
38 lines
1001 B
Plaintext
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting with the
|
|
buildroot environment for the Nanopi NEO Plus2. With the current configuration
|
|
it will bring-up the board, and allow access through the serial console.
|
|
|
|
Nanopi NEO2 link:
|
|
http://nanopi.io/nanopi-neo-plus2.html
|
|
|
|
Wiki link:
|
|
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
|
|
|
|
This configuration uses U-Boot mainline and kernel mainline.
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make friendlyarm_nanopi_neo_plus2_defconfig
|
|
$ make
|
|
|
|
Note: you will need access to the internet to download the required
|
|
sources.
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
$ sudo sync
|
|
|
|
Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
|
|
is on the serial line, 115200 8N1.
|