0a2d57596e
Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
66 lines
1.4 KiB
Plaintext
66 lines
1.4 KiB
Plaintext
Build
|
|
=====
|
|
|
|
First, configure Buildroot for your WarpBoard.
|
|
make warpboard_defconfig
|
|
|
|
Build all components:
|
|
make
|
|
|
|
You will find in ./output/images/ the following files:
|
|
- imx6sl-warp.dtb
|
|
- rootfs.tar
|
|
- u-boot.imx
|
|
- zImage
|
|
|
|
Update uboot
|
|
============
|
|
|
|
- Put warpboard in USB download mode by closing the j2 jumper on the
|
|
daugther board
|
|
|
|
- Load u-boot.imx in the WarpBoard by using the imx-usb-loader host utility:
|
|
|
|
$ ./output/host/usr/bin/imx_usb -c output/host/etc/imx-loader.d/ output/images/u-boot.imx
|
|
|
|
- U-Boot will appear in minicom
|
|
|
|
- Reset the U-Boot environment to its default:
|
|
=> env default -f -a
|
|
=> saveenv
|
|
|
|
- Run the DFU command in U-Boot:
|
|
=> dfu 0 mmc 0
|
|
|
|
- Transfer U-Boot into flash by running this command in host side:
|
|
|
|
$ sudo ./output/host/usr/bin/dfu-util -D output/images/u-boot.imx -a boot
|
|
|
|
- remove power and put the WarpBoard back into normal boot mode by
|
|
opening the j2 jumper.
|
|
|
|
Update linux & rootfs
|
|
=====================
|
|
|
|
Run the 'ums' command from the U-Boot prompt to mount the eMMC as mass
|
|
storage and update zImage, device tree (imx6sl-warp.dtb) and rootfs
|
|
file (rootfs.tar) :
|
|
|
|
=> ums 0 mmc 0
|
|
|
|
Put the zImage and DTB files in the warp-vfat partition and extract as
|
|
root the rootfs.tar tarball in the warp-rootfs partition.
|
|
|
|
Using bluetooth
|
|
================
|
|
|
|
Enable the bluez_utils or bluez5_utils package, and then run:
|
|
|
|
$ hciattach /dev/ttymxc4 any
|
|
$ hciconfig hci0 up
|
|
|
|
Using Wifi
|
|
==========
|
|
|
|
$ ifconfig wlan0 up
|