OSD32MP1-RED
Intro
=====
This configuration supports the OSD32MP1-RED platform:
https://octavosystems.com/octavo_products/osd32mp1-red/
How to build
============
$ make octavo_osd32mp1_red_defconfig
$ make
How to write the microSD card
=============================
Once the build process is finished you will have an image called
"sdcard.img" in the output/images/ directory.
Copy the bootable "sdcard.img" onto an microSD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
Boot the board
==============
(1) Insert the microSD card in connector X5.
(2) Plug an USB-SERIAL cable in the JP4 pin connector and run your serial
communication program on /dev/ttySTM0.
(3) Plug an USB-C cable in the J2 connector or use barrel power supply to
power-up the board.
(4) The system will start, with the console on UART.
8f088e6841