NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
3cc7bd2db9
kumquat-buildroot/board/firefly/firefly-rk3288
History
Arnout Vandecappelle 31be2ec220 boards: replace $HOST_DIR/usr/ with $HOST_DIR/ in scripts 
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.

This is a mechanical change with
git grep -l 'HOST_DIR}\?/usr/' board | xargs sed -i 's%\(HOST_DIR}\?\)/usr/%\1/%g'

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 15:23:13 +02:00
..
extlinux.conf board/firefly_rk3288: add new board 2016-02-20 12:06:40 +01:00
post-build.sh board/firefly_rk3288: add new board 2016-02-20 12:06:40 +01:00
post-image.sh boards: replace $HOST_DIR/usr/ with $HOST_DIR/ in scripts 2017-07-05 15:23:13 +02:00
readme.txt board/firefly_rk3288: add new board 2016-02-20 12:06:40 +01:00
sd-image.cfg board/firefly_rk3288: add new board 2016-02-20 12:06:40 +01:00

readme.txt 

Firefly RK3288

How to build it
===============

  $ make firefly_rk3288_defconfig

Then you can edit the build options using

  $ make menuconfig

Compile all and build rootfs image:

  $ make

Result of the build
-------------------

After building, you should get a tree like this:

  output/images/
  ├── rk3288-firefly.dtb
  ├── rootfs.ext2
  ├── rootfs.ext4 -> rootfs.ext2
  ├── sdcard.img
  ├── u-boot-dtb.img
  ├── u-boot-spl-dtb.bin
  ├── u-boot-spl-dtb.img
  └── uImage

Prepare your SDCard
===================

Buildroot generates a ready-to-use SD card image that you can flash directly to
the card. The image will be in output/images/sdcard.img.
You can write this image directly to an SD card device (i.e. /dev/xxx):

  $ dd if=output/images/sdcard.img of=/dev/xxx

Finally, you can insert the SD card to the Firefly RK3288 board and boot it.