kumquat-buildroot/toolchain/toolchain-external/Config.in
Vicente Olivert Riera ddf286736f toolchain-external: bump Codescape toolchains to 2016.05
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-07-04 14:47:42 +02:00

1083 lines
39 KiB
Plaintext

if BR2_TOOLCHAIN_EXTERNAL
choice
prompt "Toolchain"
comment "glibc toolchains only available with shared lib support"
depends on BR2_STATIC_LIBS
comment "Linaro toolchains available for Cortex-A + EABIhf"
depends on BR2_arm || BR2_armeb
depends on !BR2_ARM_CPU_ARMV7A || !BR2_ARM_EABIHF
depends on !BR2_STATIC_LIBS
# Note: we use the same symbol for both Linaro toolchains.
# Since they have different dependencies (the host), we can
# give them different prompts and different help texts.
config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
bool "Linaro ARM 2014.09"
depends on BR2_arm
depends on BR2_ARM_CPU_ARMV7A
depends on BR2_HOSTARCH = "x86"
depends on BR2_ARM_EABIHF
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
select BR2_TOOLCHAIN_HAS_FORTRAN
help
Linaro toolchain for the ARM architecture. It uses Linaro
GCC 2014.09 (based on gcc 4.9), Linaro GDB 2013.10 (based on
GDB 7.6), eglibc 2.19, Binutils 2014.09 (based on 2.24). It
generates code that runs on all Cortex-A profile devices,
but tuned for the Cortex-A9. The code generated is Thumb 2,
with the hard floating point calling convention, and uses
the VFPv3-D16 FPU instructions.
# See the note above.
config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
bool "Linaro ARM 2016.02"
depends on BR2_arm
depends on BR2_ARM_CPU_ARMV7A
depends on BR2_HOSTARCH = "x86_64"
depends on BR2_ARM_EABIHF
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0
select BR2_TOOLCHAIN_GCC_AT_LEAST_5
select BR2_TOOLCHAIN_HAS_FORTRAN
help
Linaro toolchain for the ARM architecture. It uses Linaro
GCC 2016.02 (based on gcc 5.3), Linaro GDB 2016.02 (based on
GDB 7.10), glibc 2.21, Binutils 2015.10 (based on 2.25). It
generates code that runs on all Cortex-A profile devices,
but tuned for the Cortex-A9. The code generated is Thumb 2,
with the hard floating point calling convention, and uses
the VFPv3-D16 FPU instructions.
# See the note above.
config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
bool "Linaro armeb 2014.09"
depends on BR2_armeb
depends on BR2_ARM_CPU_ARMV7A
depends on BR2_HOSTARCH = "x86"
depends on BR2_ARM_EABIHF
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
select BR2_TOOLCHAIN_HAS_FORTRAN
help
Linaro toolchain for the ARM big endian architecture. It
uses Linaro GCC 2014.09 (based on gcc 4.9), Linaro GDB
2013.10 (based on GDB 7.6), eglibc 2.19, Binutils 2014.09
(based on 2.24). It generates code that runs on all Cortex-A
profile devices, but tuned for the Cortex-A9. The code
generated is Thumb 2, with the hard floating point calling
convention, and uses the VFPv3-D16 FPU instructions.
# See the note above.
config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
bool "Linaro armeb 2016.02"
depends on BR2_armeb
depends on BR2_ARM_CPU_ARMV7A
depends on BR2_HOSTARCH = "x86_64"
depends on BR2_ARM_EABIHF
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0
select BR2_TOOLCHAIN_GCC_AT_LEAST_5
help
Linaro toolchain for the ARM big endian architecture. It
uses Linaro GCC 2016.02 (based on gcc 5.3), Linaro GDB
2016.02 (based on GDB 7.10), glibc 2.21, Binutils 2015.10
(based on 2.25). It generates code that runs on all Cortex-A
profile devices, but tuned for the Cortex-A9. The code
generated is Thumb 2, with the hard floating point calling
convention, and uses the VFPv3-D16 FPU instructions.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM
bool "Sourcery CodeBench ARM 2014.05"
depends on BR2_arm
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_ARM_EABI
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
help
Sourcery CodeBench toolchain for the ARM architecture, from
Mentor Graphics. It uses gcc 4.8.3, binutils 2.24.51, glibc
2.18 and gdb 7.7.50, kernel headers 3.13. It has support
for the following variants:
- ARMv5TE, little endian, soft-float, glibc
Select ARM926T, ARM10T, XScale or another ARMv5 core
Select BR2_SOFT_FLOAT
- ARMv4T, little endian, soft-float, glibc
Select ARM720T, ARM920T, ARM922T or another ARMv4 core
Select BR2_SOFT_FLOAT
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
Select Cortex-A8, Cortex-A9 or another ARMv7-A core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mthumb
comment "Sourcery CodeBench toolchains available for the EABI ABI"
depends on BR2_arm
depends on !BR2_ARM_EABI
depends on !BR2_STATIC_LIBS
config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A
bool "Arago ARMv7 2011.09"
depends on BR2_arm
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_ARM_CPU_ARMV7A
depends on BR2_ARM_EABI
depends on BR2_ARM_CPU_HAS_VFPV3
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_5
# kernel headers: 2.6.31
help
Texas Instruments Arago 2011.09 toolchain, with gcc 4.5.3,
binutils 2.20.1, glibc 2.12, gdb 7.2.
This toolchain uses -mfloat-abi=softfp (i.e can use FPU
instructions, but passes floating point function arguments
in integer registers), and requires a VFPv3 floating point
unit to work properly. This unit is available on most
Cortex-A ARM processors, but not all.
config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE
bool "Arago ARMv5 2011.09"
depends on BR2_arm
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_ARM_CPU_ARMV4
depends on BR2_ARM_EABI
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_5
# kernel headers: 2.6.31
help
Texas Instruments Arago ARMv5 2011.09 toolchain, with gcc
4.5.3, binutils 2.20.1, glibc 2.12, gdb 7.2.
This toolchain uses software-floating point.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS
bool "Sourcery CodeBench MIPS 2016.05"
depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
depends on BR2_mips_32r2 || BR2_mips_64r2
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_MIPS_NABI32
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4
select BR2_TOOLCHAIN_GCC_AT_LEAST_5
help
Sourcery CodeBench toolchain for the MIPS architecture, from
Mentor Graphics. It uses gcc 5.3, binutils 2.25.51, glibc
2.23, uClibc 0.9.30 and gdb 7.10.50, kernel headers 4.4.1. It
has support for the following variants:
- MIPS32r2 - Big-Endian, 2008 NaN, O32
Select MIPS (big endian) core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mnan=2008
- MIPS32r2 - Big-Endian, O32
Select MIPS (big endian) core
Disable BR2_SOFT_FLOAT
- MIPS32r2 - Big-Endian, O32, MIPS16
Select MIPS (big endian) core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32r2 - Big-Endian, Soft-Float, O32
Select MIPS (big endian) core
Select BR2_SOFT_FLOAT
- MIPS32r2 - Big-Endian, Soft-Float, O32, MIPS16
Select MIPS (big endian) core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32r2 - Little-Endian, 2008 NaN, O32
Select MIPS (little endian) core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mnan=2008
- MIPS32r2 - Little-Endian, O32
Select MIPS (little endian) core
Disable BR2_SOFT_FLOAT
- MIPS32r2 - Little-Endian, O32, MIPS16
Select MIPS (little endian) core
Disable BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32r2 - Little-Endian, Soft-Float, O32
Select MIPS (little endian) core
Select BR2_SOFT_FLOAT
- MIPS32r2 - Little-Endian, Soft-Float, O32, MIPS16
Select MIPS (little endian) core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mips16
- MIPS32r2 - Little-Endian, Soft-Float, O32, microMIPS
Select MIPS (little endian) core
Select BR2_SOFT_FLOAT
Set BR2_TARGET_OPTIMIZATION to -mmicromips
- MIPS32r2 - uClibc, Big-Endian, 2008 NaN, O32
Not usable in Buildroot yet.
- MIPS32r2 - uClibc, Big-Endian, O32
Not usable in Buildroot yet.
- MIPS32r2 - uClibc, Big-Endian, Soft-Float, O32
Not usable in Buildroot yet.
- MIPS32r2 - uClibc, Little-Endian, 2008 NaN, O32
Not usable in Buildroot yet.
- MIPS32r2 - uClibc, Little-Endian, O32
Not usable in Buildroot yet.
- MIPS32r2 - uClibc, Little-Endian, Soft-Float, O32
Not usable in Buildroot yet.
- MIPS64r2 - Big-Endian, N64
Select MIPS64 (big endian) core
Select the n64 ABI
Disable BR2_SOFT_FLOAT
- MIPS64r2 - Big-Endian, Soft-Float, N64
Select MIPS64 (big endian) core
Select the n64 ABI
Select BR2_SOFT_FLOAT
- MIPS64r2 - Little-Endian, N64
Select MIPS64 (little endian) core
Select the n64 ABI
Disable BR2_SOFT_FLOAT
- MIPS64r2 - Little-Endian, Soft-Float, N64
Select MIPS64 (little endian) core
Select the n64 ABI
Select BR2_SOFT_FLOAT
comment "Sourcery CodeBench toolchains are only available for MIPS/MIPS64 o32 and n64"
depends on BR2_MIPS_NABI32
depends on !BR2_STATIC_LIBS
config BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS
bool "Codescape IMG GNU Linux Toolchain 2016.05"
depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_mips_32r6 || (BR2_mips_64r6 && !BR2_MIPS_SOFT_FLOAT)
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
select BR2_TOOLCHAIN_HAS_FORTRAN
help
Codescape IMG GNU Linux Toolchain 2015.10 for the MIPS
architecture, from Imagination Technologies. It uses gcc
4.9.2, binutils 2.24.90, glibc 2.20, gdb 7.9.1 and kernel
headers 4.0. It has support for the following variants:
- MIPS32r6 - Big-Endian, Hard-Float, 2008 NaN, o32 ABI
Select 'MIPS (big endian)' Target Architecture
Select 'mips 32r6' Target Architecture Variant
Disable 'Use soft-float'
- MIPS32r6 - Big-Endian, Soft-Float, 2008 NaN, o32 ABI
Select 'MIPS (big endian)' Target Architecture
Select 'mips 32r6' Target Architecture Variant
Enable 'Use soft-float'
- MIPS32r6 - Little-Endian, Hard-Float, 2008 NaN, o32 ABI
Select 'MIPS (little endian)' Target Architecture
Select 'mips 32r6' Target Architecture Variant
Disable 'Use soft-float'
- MIPS32r6 - Little-Endian, Soft-Float, 2008 NaN, o32 ABI
Select 'MIPS (little endian)' Target Architecture
Select 'mips 32r6' Target Architecture Variant
Enable 'Use soft-float'
- MIPS32r6 - Little-Endian, Hard-Float, 2008 NaN, o32 ABI, microMIPS
Select 'MIPS (little endian)' Target Architecture
Select 'mips 32r6' Target Architecture Variant
Disable 'Use soft-float'
Set BR2_TARGET_OPTIMIZATION to '-mmicromips'
- MIPS32r6 - Little-Endian, Soft-Float, 2008 NaN, o32 ABI, microMIPS
Select 'MIPS (little endian)' Target Architecture
Select 'mips 32r6' Target Architecture Variant
Enable 'Use soft-float'
Set BR2_TARGET_OPTIMIZATION to '-mmicromips'
- MIPS64r6 - Big-Endian, Hard-Float, 2008 NaN, n32 ABI
Select 'MIPS64 (big endian)' Target Architecture
Select 'mips 64r6' Target Architecture Variant
Select 'n32' Target ABI
Disable 'Use soft-float'
- MIPS64r6 - Little-Endian, Hard-Float, 2008 NaN, n32 ABI
Select 'MIPS64 (little endian)' Target Architecture
Select 'mips 64r6' Target Architecture Variant
Select 'n32' Target ABI
Disable 'Use soft-float'
- MIPS64r6 - Big-Endian, Hard-Float, 2008 NaN, n64 ABI
Select 'MIPS64 (big endian)' Target Architecture
Select 'mips 64r6' Target Architecture Variant
Select 'n64' Target ABI
Disable 'Use soft-float'
- MIPS64r6 - Little-Endian, Hard-Float, 2008 NaN, n64 ABI
Select 'MIPS64 (little endian)' Target Architecture
Select 'mips 64r6' Target Architecture Variant
Select 'n64' Target ABI
Disable 'Use soft-float'
config BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS
bool "Codescape MTI GNU Linux Toolchain 2016.05"
depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on BR2_mips_32r2 || (BR2_mips_64r2 && !BR2_MIPS_SOFT_FLOAT)
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
select BR2_TOOLCHAIN_HAS_FORTRAN
help
Codescape MTI GNU Linux Toolchain 2015.10 for the MIPS
architecture, from Imagination Technologies. It uses gcc
4.9.2, binutils 2.24.90, glibc 2.20, gdb 7.9.1 and kernel
headers 4.0. It has support for the following variants:
- MIPS32r2 - Big-Endian, Hard-Float, Legacy NaN, o32 ABI
Select 'MIPS (big endian)' Target Architecture
Select 'mips 32r2' Target Architecture Variant
Disable 'Use soft-float'
- MIPS32r2 - Big-Endian, Hard-Float, 2008 NaN, o32 ABI
Select 'MIPS (big endian)' Target Architecture
Select 'mips 32r2' Target Architecture Variant
Disable 'Use soft-float'
Set BR2_TARGET_OPTIMIZATION to '-mnan=2008'
- MIPS32r2 - Big-Endian, Soft-Float, Legacy NaN, o32 ABI
Select 'MIPS (big endian)' Target Architecture
Select 'mips 32r2' Target Architecture Variant
Enable 'Use soft-float'
- MIPS32r2 - Little-Endian, Hard-Float, Legacy NaN, o32 ABI
Select 'MIPS (little endian)' Target Architecture
Select 'mips 32r2' Target Architecture Variant
Disable 'Use soft-float'
- MIPS32r2 - Little-Endian, Hard-Float, 2008 NaN, o32 ABI
Select 'MIPS (little endian)' Target Architecture
Select 'mips 32r2' Target Architecture Variant
Disable 'Use soft-float'
Set BR2_TARGET_OPTIMIZATION to '-mnan=2008'
- MIPS32r2 - Little-Endian, Soft-Float, Legacy NaN, o32 ABI
Select 'MIPS (little endian)' Target Architecture
Select 'mips 32r2' Target Architecture Variant
Enable 'Use soft-float'
- MIPS32r2 - Little-Endian, Hard-Float, 2008 NaN, o32 ABI, microMIPS
Select 'MIPS (little endian)' Target Architecture
Select 'mips 32r2' Target Architecture Variant
Enable 'Use soft-float'
Set BR2_TARGET_OPTIMIZATION to '-mmicromips'
- MIPS32r2 - Little-Endian, Soft-Float, Legacy NaN, o32 ABI, microMIPS
Select 'MIPS (little endian)' Target Architecture
Select 'mips 32r2' Target Architecture Variant
Disable 'Use soft-float'
Set BR2_TARGET_OPTIMIZATION to '-mmicromips'
- MIPS64r2 - Big-Endian, Hard-Float, Legacy NaN, n32 ABI
Select 'MIPS64 (big endian)' Target Architecture
Select 'mips 64r2' Target Architecture Variant
Select 'n32' Target ABI
Disable 'Use soft-float'
- MIPS64r2 - Little-Endian, Hard-Float, Legacy NaN, n32 ABI
Select 'MIPS64 (little endian)' Target Architecture
Select 'mips 64r2' Target Architecture Variant
Select 'n32' Target ABI
Disable 'Use soft-float'
- MIPS64r2 - Big-Endian, Hard-Float, Legacy NaN, n64 ABI
Select 'MIPS64 (big endian)' Target Architecture
Select 'mips 64r2' Target Architecture Variant
Select 'n64' Target ABI
Disable 'Use soft-float'
- MIPS64r2 - Little-Endian, Hard-Float, Legacy NaN, n64 ABI
Select 'MIPS64 (little endian)' Target Architecture
Select 'mips 64r2' Target Architecture Variant
Select 'n64' Target ABI
Disable 'Use soft-float'
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII
bool "Sourcery CodeBench Nios-II 2016.05"
depends on BR2_nios2
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4
select BR2_TOOLCHAIN_GCC_AT_LEAST_5
select BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 # based-on binutils-2.25.1
help
Sourcery CodeBench toolchain for the Nios-II architecture,
from Mentor Graphics. It uses gcc 5.3, binutils 2.25.51,
glibc 2.23, gdb 7.10.50 and kernel headers 4.4.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH
bool "Sourcery CodeBench SH 2012.09"
depends on BR2_sh4a || BR2_sh4aeb
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_7
help
Sourcery CodeBench toolchain for the SuperH architecture,
from Mentor Graphics. It uses gcc 4.7.2, binutils 2.23.51,
glibc 2.16, uClibc 0.9.30, gdb 7.4.50 and kernel headers
3.5.4. It has support for the following variants:
- SH4A, glibc, little endian
Default.
- SH4A, glibc, big endian
Add -mb to BR2_TARGET_OPTIMIZATION
- SH4A, uClibc, little endian
Not usable in Buildroot yet.
- SH4A, uClibc, big endian
Not usable in Buildroot yet.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64
bool "Sourcery CodeBench AMD64 2015.11"
depends on BR2_x86_64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
depends on BR2_x86_jaguar || BR2_x86_steamroller
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_2
select BR2_TOOLCHAIN_GCC_AT_LEAST_5
help
Sourcery CodeBench toolchain for the amd64 (x86_64)
architectures, from Mentor Graphics. It uses gcc 5.2,
binutils 2.25.51, glibc 2.22, gdb 7.10.50 and kernel headers
4.2. It has support for the following variants:
- AMD Puma/Jaguar (family 16h), glibc
Default for x86_64, nothing special to do.
- AMD Steamroller (family 15h), glibc
Select a steamroller core.
No other architecture variants are supported since glibc
is optimized for one of these two baselines.
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86
bool "Sourcery CodeBench x86/x86_64 2012.09"
depends on BR2_i386 || BR2_x86_64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
depends on !BR2_x86_jaguar
depends on !BR2_x86_steamroller
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_7
help
Sourcery CodeBench toolchain for the x86/x86_64
architectures, from Mentor Graphics. It uses gcc 4.7.2,
binutils 2.23.51, glibc 2.16, gdb 7.4.50 and kernel headers
3.5.4. It has support for the following variants:
- Intel Pentium 4, glibc, 32 bits
Default for x86, nothing special to do.
- Intel Atom, glibc, 32 bits
Select an Atom core
- Intel Xeon, glibc, 64 bits
Default for x86_64, nothing special to do.
- Intel Core 2, glibc, 64 bits
Select a Core 2 core
Other architecture variants (beyond Pentium-4/Xeon) are
supported as well, but glibc is not optimised for it.
config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX
bool "Blackfin.uclinux.org 2014R1"
depends on BR2_bfin
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_USE_WCHAR
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_3
select BR2_TOOLCHAIN_HAS_FORTRAN
help
Toolchain for the Blackfin architecture, from
http://blackfin.uclinux.org.
# See note about Linaro ARM/ARMEB toolchains, above.
config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
bool "Linaro AArch64 14.09"
depends on BR2_aarch64
depends on BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_INSTALL_LIBSTDCPP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
select BR2_TOOLCHAIN_HAS_FORTRAN
help
Toolchain for the AArch64 architecture, from
http://www.linaro.org/engineering/armv8/
# See note about Linaro ARM/ARMEB toolchains, above.
config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
bool "Linaro AArch64 2016.02"
depends on BR2_aarch64
depends on BR2_HOSTARCH = "x86_64"
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_INSTALL_LIBSTDCPP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0
select BR2_TOOLCHAIN_GCC_AT_LEAST_5
select BR2_TOOLCHAIN_HAS_FORTRAN
help
Toolchain for the AArch64 architecture, from
http://www.linaro.org/engineering/armv8/
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64
bool "CodeSourcery AArch64 2014.11"
depends on BR2_aarch64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_TOOLCHAIN_HAS_SSP
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_16
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
help
Sourcery CodeBench toolchain for the AArch64 architecture,
from Mentor Graphics. It uses gcc 4.9.1, binutils
2.24.51.20140217, glibc 2.20, gdb 7.7.50 and kernel headers
3.16.2.
config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
bool "Musl 1.1.12 toolchain"
depends on (BR2_arm && BR2_ARM_EABI) || \
(BR2_arm && BR2_ARM_EABIHF && !BR2_ARM_CPU_ARMV4) || \
(BR2_armeb && BR2_ARM_EABI) || BR2_i386 || \
(BR2_mips && !BR2_SOFT_FLOAT) || \
BR2_mipsel || (BR2_powerpc && BR2_powerpc_CLASSIC) || \
BR2_sh4 || BR2_sh4eb || \
BR2_x86_64
depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
# Unsupported for MIPS R6
depends on !BR2_mips_32r6 && !BR2_mips_64r6
select BR2_TOOLCHAIN_EXTERNAL_MUSL
select BR2_TOOLCHAIN_HAS_SSP
select BR2_INSTALL_LIBSTDCPP
select BR2_HOSTARCH_NEEDS_IA32_LIBS
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12
select BR2_TOOLCHAIN_GCC_AT_LEAST_5
help
Toolchain based on the Musl C library, provided by the
musl-cross project. It uses gcc 5.3, binutils 2.25.1 and
musl 1.1.12. It does not have a cross debugger included.
The ARM soft-float toolchain is built for ARMv4t, while the
ARM hard-float toolchain is built for ARMv5t.
The x86 toolchain is built for i486.
http://musl.codu.org/
config BR2_TOOLCHAIN_EXTERNAL_SYNOPSYS_ARC
bool "Synopsys ARC 2014.12 toolchain"
depends on BR2_arc
depends on BR2_HOSTARCH = "x86_64"
# does not provide IPv6, and lacks many uClibc features
# expected by Buildroot. The next Synopsys toolchain version
# should fix those problems.
depends on BROKEN
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_INSTALL_LIBSTDCPP
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
select BR2_ENABLE_LOCALE
select BR2_USE_WCHAR
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
help
Toolchain for the ARC cores, from
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM
bool "Custom toolchain"
help
Use this option to use a custom toolchain pre-installed on
your system.
endchoice
choice
prompt "Toolchain origin"
# Keep compatibility with old defconfig files that are using
# custom toolchains, and which are therefore assuming that
# "preinstalled" in the default choice.
default BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
config BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD
bool "Toolchain to be downloaded and installed"
help
Select this option if you want Buildroot to download and install the
toolchain. If you have selected a custom toolchain, specify the URL
in BR2_TOOLCHAIN_EXTERNAL_URL.
config BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED
bool "Pre-installed toolchain"
help
Select this option if you want to use a pre-installed toolchain.
Specify the path to this toolchain in BR2_TOOLCHAIN_EXTERNAL_PATH.
endchoice
config BR2_TOOLCHAIN_EXTERNAL_PATH
string "Toolchain path"
default "/path/to/toolchain/usr"
depends on BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED
help
Path to where the external toolchain is installed.
config BR2_TOOLCHAIN_EXTERNAL_URL
string "Toolchain URL"
depends on BR2_TOOLCHAIN_EXTERNAL_CUSTOM && BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD
help
URL of the custom toolchain tarball to download and install.
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX
string "Toolchain prefix"
depends on BR2_TOOLCHAIN_EXTERNAL_CUSTOM
default "$(ARCH)-linux"
config BR2_TOOLCHAIN_EXTERNAL_PREFIX
string
default "arc-linux" if BR2_TOOLCHAIN_EXTERNAL_SYNOPSYS_ARC && BR2_arcle
default "arceb-linux" if BR2_TOOLCHAIN_EXTERNAL_SYNOPSYS_ARC && BR2_arceb
default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
default "armeb-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM
default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A
default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE
default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
default "aarch64-amd-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64
default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS
default "nios2-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH
default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86
default "x86_64-amd-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX && BR2_BINFMT_FLAT
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX && BR2_BINFMT_FDPIC
default "arm-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm && BR2_ARM_EABI
default "arm-linux-musleabihf" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm && BR2_ARM_EABIHF
default "mips-img-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS
default "mips-mti-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS
default "armeb-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_armeb
default "i486-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_i386
default "mips-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mips && !BR2_SOFT_FLOAT)
default "mipsel-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mipsel && !BR2_SOFT_FLOAT)
default "mipsel-sf-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && (BR2_mipsel && BR2_SOFT_FLOAT)
default "powerpc-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_powerpc
default "sh4-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_sh4
default "sh4eb-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_sh4eb
default "x86_64-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_x86_64
default BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX \
if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
config BR2_TOOLCHAIN_EXTERNAL_GLIBC
bool
select BR2_TOOLCHAIN_USES_GLIBC
config BR2_TOOLCHAIN_EXTERNAL_UCLIBC
bool
select BR2_TOOLCHAIN_USES_UCLIBC
config BR2_TOOLCHAIN_EXTERNAL_MUSL
bool
select BR2_TOOLCHAIN_USES_MUSL
select BR2_PACKAGE_NETBSD_QUEUE
if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
choice
bool "External toolchain gcc version"
default BR2_TOOLCHAIN_EXTERNAL_GCC_4_3
help
Set to the gcc version that is used by your external
toolchain.
config BR2_TOOLCHAIN_EXTERNAL_GCC_6
bool "6.x"
select BR2_TOOLCHAIN_GCC_AT_LEAST_6
config BR2_TOOLCHAIN_EXTERNAL_GCC_5
bool "5.x"
select BR2_TOOLCHAIN_GCC_AT_LEAST_5
config BR2_TOOLCHAIN_EXTERNAL_GCC_4_9
bool "4.9.x"
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
config BR2_TOOLCHAIN_EXTERNAL_GCC_4_8
bool "4.8.x"
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
config BR2_TOOLCHAIN_EXTERNAL_GCC_4_7
bool "4.7.x"
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_7
config BR2_TOOLCHAIN_EXTERNAL_GCC_4_6
bool "4.6.x"
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_6
config BR2_TOOLCHAIN_EXTERNAL_GCC_4_5
bool "4.5.x"
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_5
config BR2_TOOLCHAIN_EXTERNAL_GCC_4_4
bool "4.4.x"
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_4
config BR2_TOOLCHAIN_EXTERNAL_GCC_4_3
bool "4.3.x"
select BR2_TOOLCHAIN_GCC_AT_LEAST_4_3
endchoice
choice
bool "External toolchain kernel headers series"
default BR2_TOOLCHAIN_EXTERNAL_HEADERS_REALLY_OLD
help
Set to the kernel headers version that were used to build
this external toolchain.
This is used to hide/show some packages that have strict
requirements on the version of kernel headers.
If unsure what version your toolchain is using, you can look
at the value of LINUX_VERSION_CODE in linux/version.h in your
toolchain. The Linux version is M.m.p, with:
M = ( LINUX_VERSION_CODE >> 16 ) & 0xFF
m = ( LINUX_VERSION_CODE >> 8 ) & 0xFF
p = ( LINUX_VERSION_CODE >> 0 ) & 0xFF
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_6
bool "4.6.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_6
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_5
bool "4.5.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_4
bool "4.4.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_3
bool "4.3.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_3
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_2
bool "4.2.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_2
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_1
bool "4.1.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_1
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_0
bool "4.0.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_19
bool "3.19.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_19
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_18
bool "3.18.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_18
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_17
bool "3.17.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_17
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_16
bool "3.16.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_16
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_15
bool "3.15.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_14
bool "3.14.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_13
bool "3.13.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_12
bool "3.12.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_11
bool "3.11.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10
bool "3.10.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_9
bool "3.9.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_9
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_8
bool "3.8.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_7
bool "3.7.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_6
bool "3.6.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_6
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_5
bool "3.5.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_4
bool "3.4.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_4
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_3
bool "3.3.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_2
bool "3.2.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_1
bool "3.1.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_0
bool "3.0.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0
config BR2_TOOLCHAIN_EXTERNAL_HEADERS_REALLY_OLD
bool "2.6.x"
endchoice
choice
prompt "External toolchain C library"
default BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC
bool "uClibc"
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
# For the time being, we assume that all custom external
# toolchains have shadow password support.
select BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS
help
Select this option if your external toolchain uses the
uClibc C library (available from http://www.uclibc.org/).
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC
bool "glibc/eglibc"
depends on !BR2_STATIC_LIBS
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
help
Select this option if your external toolchain uses the GNU C
library (available from https://www.gnu.org/software/libc/)
or its variant the eglibc library (http://www.eglibc.org/).
Note: eglibc is a variant of glibc that (among other things)
can be configured to exclude some of its features. Using a
toolchain with eglibc configured to exclude key features may
cause build failures to some packages.
comment "glibc only available with shared lib support"
depends on BR2_STATIC_LIBS
config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL
bool "musl"
select BR2_TOOLCHAIN_EXTERNAL_MUSL
help
Select this option if your external toolchain uses the
'musl' C library, available from http://www.musl-libc.org/.
endchoice
if BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC
config BR2_TOOLCHAIN_EXTERNAL_WCHAR
bool "Toolchain has WCHAR support?"
select BR2_USE_WCHAR
help
Select this option if your external toolchain supports
WCHAR. If you don't know, leave the default value, Buildroot
will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_LOCALE
bool "Toolchain has locale support?"
select BR2_TOOLCHAIN_EXTERNAL_WCHAR
select BR2_ENABLE_LOCALE
help
Select this option if your external toolchain has locale
support. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS
bool "Toolchain has threads support?"
select BR2_TOOLCHAIN_HAS_THREADS
default y
help
Select this option if your external toolchain has thread
support. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
if BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS
config BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG
bool "Toolchain has threads debugging support?"
select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
default y
help
Select this option if your external toolchain has thread
debugging support. If you don't know, leave the default
value, Buildroot will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL
bool "Toolchain has NPTL threads support?"
select BR2_TOOLCHAIN_HAS_THREADS_NPTL
default y
help
Select this option if your external toolchain uses the NPTL
(Native Posix Thread Library) implementation of Posix
threads. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
endif # BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS
endif # BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC
config BR2_TOOLCHAIN_EXTERNAL_HAS_SSP
bool "Toolchain has SSP support?"
select BR2_TOOLCHAIN_HAS_SSP
default y if BR2_TOOLCHAIN_EXTERNAL_GLIBC
default y if BR2_TOOLCHAIN_EXTERNAL_MUSL
help
Selection this option if your external toolchain has Stack
Smashing Protection support enabled. If you don't know,
leave the default value, Buildroot will tell you if it's
correct or not.
config BR2_TOOLCHAIN_EXTERNAL_INET_RPC
bool "Toolchain has RPC support?"
select BR2_TOOLCHAIN_HAS_NATIVE_RPC
depends on !BR2_TOOLCHAIN_EXTERNAL_MUSL
default y if BR2_TOOLCHAIN_EXTERNAL_GLIBC
help
Select this option if your external toolchain supports
RPC. If you don't know, leave the default value, Buildroot
will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_CXX
bool "Toolchain has C++ support?"
select BR2_INSTALL_LIBSTDCPP
help
Select this option if your external toolchain has C++
support. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTERNAL_FORTRAN
bool "Toolchain has Fortran support?"
select BR2_TOOLCHAIN_HAS_FORTRAN
help
Select this option if your external toolchain has Fortran
support. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
config BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
string "Extra toolchain libraries to be copied to target"
help
If your external toolchain provides extra libraries that
need to be copied to the target filesystem, enter them
here, separated by spaces.
endif # BR2_TOOLCHAIN_EXTERNAL_CUSTOM
config BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY
bool "Copy gdb server to the Target"
depends on BR2_TOOLCHAIN_EXTERNAL
help
Copy the gdbserver provided by the external toolchain to the
target.
# When the FDPIC shared binary format is used, the corresponding libraries are
# always installed. When a different binary format is used, we offer the option
# of installing the FDPIC shared libraries.
config BR2_BFIN_INSTALL_FDPIC_SHARED
bool "Install FDPIC shared libraries"
depends on BR2_bfin && !BR2_BINFMT_FDPIC
help
The Linux kernel supports running both FDPIC and FLAT applications
concurrently if the binary format specific libraries are installed
properly. This option allows developer to install FDPIC libraries
into a buildroot rootfs image built with binary format that is not
FDPIC.
# When the FLAT shared binary format is used, we force the installation
# of the corresponding libraries. When a different binary format is
# used, we offer the option of installing the FLAT shared libraries.
config BR2_BFIN_INSTALL_FLAT_SHARED
bool "Install FLAT shared libraries" if !BR2_BINFMT_FLAT_SHARED
depends on BR2_bfin
default y if BR2_BINFMT_FLAT_SHARED
help
The Linux kernel supports running both FDPIC and FLAT applications
concurrently if the binary format specific libraries are installed
properly. This option allows developer to install FLAT libraries
into a buildroot rootfs image built with binary format that is not
shared FLAT.
endif # BR2_TOOLCHAIN_EXTERNAL