5ce73dca52
The buildroot internal toolchain now adds a wrapper. When we use a buildroot toolchain as an external toolchain, we want to bypass this wrapper and call the compiler directly, for two reasons: 1. The options added by the wrapper are not necessarily appropriate when it is reused as an external toolchain. For instance, ccache may have been enabled while building the toolchain but not when using it as an external toolchain. 2. Currently, the wrapper expects to reside in .../usr/bin, but when used as an external toolchain it will be in .../ext-toolchain/bin. Therefore, the wrapper can't find the real binary and sysroot anymore. To bypass the wrapper, we check for the existence of *.br_real files in the external toolchain directory. If any such file exists, the wrapper will add the .br_real suffix for all the wrapped files. Note that the wrapper doesn't check if the *.br_real exists for each individual wrapped file, it just assumes that all wrapped files have a corresponding .br_real. This is currently true but that may change in the future of course. Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
788 lines
38 KiB
Makefile
788 lines
38 KiB
Makefile
################################################################################
|
|
#
|
|
# toolchain-external
|
|
#
|
|
################################################################################
|
|
|
|
#
|
|
# This package implements the support for external toolchains, i.e
|
|
# toolchains that are available pre-built, ready to use. Such toolchain
|
|
# may either be readily available on the Web (Linaro, Sourcery
|
|
# CodeBench, from processor vendors) or may be built with tools like
|
|
# Crosstool-NG or Buildroot itself. So far, we have tested this
|
|
# with:
|
|
#
|
|
# * Toolchains generated by Crosstool-NG
|
|
# * Toolchains generated by Buildroot
|
|
# * Toolchains provided by Linaro for the ARM and AArch64
|
|
# architectures
|
|
# * Sourcery CodeBench toolchains (from Mentor Graphics) for the ARM,
|
|
# MIPS, PowerPC, x86, x86_64 and NIOS 2 architectures. For the MIPS
|
|
# toolchain, the -muclibc variant isn't supported yet, only the
|
|
# default glibc-based variant is.
|
|
# * Analog Devices toolchains for the Blackfin architecture
|
|
# * Xilinx toolchains for the Microblaze architecture
|
|
# * Synopsys DesignWare toolchains for ARC cores
|
|
#
|
|
# The basic principle is the following
|
|
#
|
|
# 1. If the toolchain is not pre-installed, download and extract it
|
|
# in $(TOOLCHAIN_EXTERNAL_INSTALL_DIR). Otherwise,
|
|
# $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) points to were the toolchain has
|
|
# already been installed by the user.
|
|
#
|
|
# 2. For all external toolchains, perform some checks on the
|
|
# conformity between the toolchain configuration described in the
|
|
# Buildroot menuconfig system, and the real configuration of the
|
|
# external toolchain. This is for example important to make sure that
|
|
# the Buildroot configuration system knows whether the toolchain
|
|
# supports RPC, IPv6, locales, large files, etc. Unfortunately, these
|
|
# things cannot be detected automatically, since the value of these
|
|
# options (such as BR2_TOOLCHAIN_HAS_NATIVE_RPC) are needed at
|
|
# configuration time because these options are used as dependencies
|
|
# for other options. And at configuration time, we are not able to
|
|
# retrieve the external toolchain configuration.
|
|
#
|
|
# 3. Copy the libraries needed at runtime to the target directory,
|
|
# $(TARGET_DIR). Obviously, things such as the C library, the dynamic
|
|
# loader and a few other utility libraries are needed if dynamic
|
|
# applications are to be executed on the target system.
|
|
#
|
|
# 4. Copy the libraries and headers to the staging directory. This
|
|
# will allow all further calls to gcc to be made using --sysroot
|
|
# $(STAGING_DIR), which greatly simplifies the compilation of the
|
|
# packages when using external toolchains. So in the end, only the
|
|
# cross-compiler binaries remains external, all libraries and headers
|
|
# are imported into the Buildroot tree.
|
|
#
|
|
# 5. Build a toolchain wrapper which executes the external toolchain
|
|
# with a number of arguments (sysroot/march/mtune/..) hardcoded,
|
|
# so we're sure the correct configuration is always used and the
|
|
# toolchain behaves similar to an internal toolchain.
|
|
# This toolchain wrapper and symlinks are installed into
|
|
# $(HOST_DIR)/usr/bin like for the internal toolchains, and the rest
|
|
# of Buildroot is handled identical for the 2 toolchain types.
|
|
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC),y)
|
|
LIB_EXTERNAL_LIBS += libatomic.so.* libc.so.* libcrypt.so.* libdl.so.* libgcc_s.so.* libm.so.* libnsl.so.* libresolv.so.* librt.so.* libutil.so.*
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_ARM_EABIHF),yy)
|
|
LIB_EXTERNAL_LIBS += ld-linux-armhf.so.*
|
|
else
|
|
LIB_EXTERNAL_LIBS += ld*.so.*
|
|
endif
|
|
ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
|
|
LIB_EXTERNAL_LIBS += libpthread.so.*
|
|
ifneq ($(BR2_PACKAGE_GDB)$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY),)
|
|
LIB_EXTERNAL_LIBS += libthread_db.so.*
|
|
endif # gdbserver
|
|
endif # ! no threads
|
|
endif
|
|
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y)
|
|
LIB_EXTERNAL_LIBS += libnss_files.so.* libnss_dns.so.*
|
|
endif
|
|
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y)
|
|
LIB_EXTERNAL_LIBS += libc.so libgcc_s.so.*
|
|
endif
|
|
|
|
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
|
|
USR_LIB_EXTERNAL_LIBS += libstdc++.so.*
|
|
endif
|
|
|
|
LIB_EXTERNAL_LIBS += $(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS))
|
|
|
|
# Details about sysroot directory selection.
|
|
#
|
|
# To find the sysroot directory, we use the trick of looking for the
|
|
# 'libc.a' file with the -print-file-name gcc option, and then
|
|
# mangling the path to find the base directory of the sysroot.
|
|
#
|
|
# Note that we do not use the -print-sysroot option, because it is
|
|
# only available since gcc 4.4.x, and we only recently dropped support
|
|
# for 4.2.x and 4.3.x.
|
|
#
|
|
# When doing this, we don't pass any option to gcc that could select a
|
|
# multilib variant (such as -march) as we want the "main" sysroot,
|
|
# which contains all variants of the C library in the case of multilib
|
|
# toolchains. We use the TARGET_CC_NO_SYSROOT variable, which is the
|
|
# path of the cross-compiler, without the --sysroot=$(STAGING_DIR),
|
|
# since what we want to find is the location of the original toolchain
|
|
# sysroot. This "main" sysroot directory is stored in SYSROOT_DIR.
|
|
#
|
|
# Then, multilib toolchains are a little bit more complicated, since
|
|
# they in fact have multiple sysroots, one for each variant supported
|
|
# by the toolchain. So we need to find the particular sysroot we're
|
|
# interested in.
|
|
#
|
|
# To do so, we ask the compiler where its sysroot is by passing all
|
|
# flags (including -march and al.), except the --sysroot flag since we
|
|
# want to the compiler to tell us where its original sysroot
|
|
# is. ARCH_SUBDIR will contain the subdirectory, in the main
|
|
# SYSROOT_DIR, that corresponds to the selected architecture
|
|
# variant. ARCH_SYSROOT_DIR will contain the full path to this
|
|
# location.
|
|
#
|
|
# One might wonder why we don't just bother with ARCH_SYSROOT_DIR. The
|
|
# fact is that in multilib toolchains, the header files are often only
|
|
# present in the main sysroot, and only the libraries are available in
|
|
# each variant-specific sysroot directory.
|
|
|
|
|
|
TOOLCHAIN_EXTERNAL_PREFIX = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX))
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y)
|
|
TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(HOST_DIR)/opt/ext-toolchain
|
|
else
|
|
TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH))
|
|
endif
|
|
|
|
ifeq ($(TOOLCHAIN_EXTERNAL_INSTALL_DIR),)
|
|
ifneq ($(TOOLCHAIN_EXTERNAL_PREFIX),)
|
|
# if no path set, figure it out from path
|
|
TOOLCHAIN_EXTERNAL_BIN := $(shell dirname $(shell which $(TOOLCHAIN_EXTERNAL_PREFIX)-gcc))
|
|
endif
|
|
else
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y)
|
|
TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin
|
|
else
|
|
TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin
|
|
endif
|
|
endif
|
|
|
|
# If this is a buildroot toolchain, it already has a wrapper which we want to
|
|
# bypass. Since this is only evaluated after it has been extracted, we can use
|
|
# $(wildcard ...) here.
|
|
TOOLCHAIN_EXTERNAL_SUFFIX = \
|
|
$(if $(wildcard $(TOOLCHAIN_EXTERNAL_BIN)/*.br_real),.br_real)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
|
|
-DBR_CROSS_PATH_SUFFIX='"$(TOOLCHAIN_EXTERNAL_SUFFIX)"'
|
|
|
|
TOOLCHAIN_EXTERNAL_CROSS = $(TOOLCHAIN_EXTERNAL_BIN)/$(TOOLCHAIN_EXTERNAL_PREFIX)-
|
|
TOOLCHAIN_EXTERNAL_CC = $(TOOLCHAIN_EXTERNAL_CROSS)gcc$(TOOLCHAIN_EXTERNAL_SUFFIX)
|
|
TOOLCHAIN_EXTERNAL_CXX = $(TOOLCHAIN_EXTERNAL_CROSS)g++$(TOOLCHAIN_EXTERNAL_SUFFIX)
|
|
TOOLCHAIN_EXTERNAL_READELF = $(TOOLCHAIN_EXTERNAL_CROSS)readelf$(TOOLCHAIN_EXTERNAL_SUFFIX)
|
|
|
|
ifeq ($(filter $(HOST_DIR)/%,$(TOOLCHAIN_EXTERNAL_BIN)),)
|
|
# TOOLCHAIN_EXTERNAL_BIN points outside HOST_DIR => absolute path
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
|
|
-DBR_CROSS_PATH_ABS='"$(TOOLCHAIN_EXTERNAL_BIN)"'
|
|
else
|
|
# TOOLCHAIN_EXTERNAL_BIN points inside HOST_DIR => relative path
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
|
|
-DBR_CROSS_PATH_REL='"$(TOOLCHAIN_EXTERNAL_BIN:$(HOST_DIR)/%=%)"'
|
|
endif
|
|
|
|
ifeq ($(call qstrip,$(BR2_GCC_TARGET_CPU_REVISION)),)
|
|
CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU))
|
|
else
|
|
CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU)-$(BR2_GCC_TARGET_CPU_REVISION))
|
|
endif
|
|
CC_TARGET_ARCH_ := $(call qstrip,$(BR2_GCC_TARGET_ARCH))
|
|
CC_TARGET_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_ABI))
|
|
CC_TARGET_FPU_ := $(call qstrip,$(BR2_GCC_TARGET_FPU))
|
|
CC_TARGET_FLOAT_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI))
|
|
CC_TARGET_MODE_ := $(call qstrip,$(BR2_GCC_TARGET_MODE))
|
|
|
|
# march/mtune/floating point mode needs to be passed to the external toolchain
|
|
# to select the right multilib variant
|
|
ifeq ($(BR2_x86_64),y)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -m64
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_64
|
|
endif
|
|
ifneq ($(CC_TARGET_ARCH_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -march=$(CC_TARGET_ARCH_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_CPU_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -mcpu=$(CC_TARGET_CPU_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_ABI_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -mabi=$(CC_TARGET_ABI_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_FPU_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -mfpu=$(CC_TARGET_FPU_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FPU='"$(CC_TARGET_FPU_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_FLOAT_ABI_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -mfloat-abi=$(CC_TARGET_FLOAT_ABI_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FLOAT_ABI='"$(CC_TARGET_FLOAT_ABI_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_MODE_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -m$(CC_TARGET_MODE_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MODE='"$(CC_TARGET_MODE_)"'
|
|
endif
|
|
ifeq ($(BR2_BINFMT_FLAT),y)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -Wl,-elf2flt
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_BINFMT_FLAT
|
|
endif
|
|
ifeq ($(BR2_mipsel)$(BR2_mips64el),y)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_LITTLE_ENDIAN
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -EL
|
|
endif
|
|
ifeq ($(BR2_mips)$(BR2_mips64),y)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_BIG_ENDIAN
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -EB
|
|
endif
|
|
ifeq ($(BR2_arceb),y)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARC_TARGET_BIG_ENDIAN
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -EB
|
|
endif
|
|
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += $(call qstrip,$(BR2_TARGET_OPTIMIZATION))
|
|
|
|
ifeq ($(BR2_SOFT_FLOAT),y)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -msoft-float
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_SOFTFLOAT=1
|
|
endif
|
|
|
|
# The Linaro ARMhf toolchain expects the libraries in
|
|
# {/usr,}/lib/arm-linux-gnueabihf, but Buildroot copies them to
|
|
# {/usr,}/lib, so we need to create a symbolic link.
|
|
define TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
|
|
ln -snf . $(TARGET_DIR)/lib/arm-linux-gnueabihf
|
|
ln -snf . $(TARGET_DIR)/usr/lib/arm-linux-gnueabihf
|
|
endef
|
|
|
|
define TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
|
|
ln -snf . $(TARGET_DIR)/lib/armeb-linux-gnueabihf
|
|
ln -snf . $(TARGET_DIR)/usr/lib/armeb-linux-gnueabihf
|
|
endef
|
|
|
|
define TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
|
|
ln -snf . $(TARGET_DIR)/lib/aarch64-linux-gnu
|
|
ln -snf . $(TARGET_DIR)/usr/lib/aarch64-linux-gnu
|
|
endef
|
|
|
|
# The CodeSourcery MIPS 2015.05 toolchain has some missing headers we
|
|
# need to create manually in order to avoid compilation errors. A bug
|
|
# has been already reported and fixed upstream, and the fix will be
|
|
# included in the next release.
|
|
define TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201505_LIB_NAMES_FIX
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard.h \
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_soft.h
|
|
$(SED) 's#hard#soft#' $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_soft.h
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard.h \
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h
|
|
$(SED) 's#hard#hard_2008#' $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h
|
|
$(SED) 's#ld.so.1#ld-linux-mipsn8.so.1#' $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h
|
|
$(SED) '/LD_SO/i \
|
|
#define LD_LINUX_MIPSN8_SO "ld-linux-mipsn8.so.1"' \
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_soft.h \
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-n64_soft.h
|
|
$(SED) 's#o32#n64#' $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-n64_soft.h
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_soft.h \
|
|
$(STAGING_DIR)/usr/include/gnu/
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h \
|
|
$(STAGING_DIR)/usr/include/gnu/
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-n64_soft.h \
|
|
$(STAGING_DIR)/usr/include/gnu/
|
|
endef
|
|
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arm-2013.05-24-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arm-2013.11-33-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201405),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arm-2014.05-29-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv7a-linux-gnueabi-sdk.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL = arago-toolchain-2011.09-sources.tar.bz2
|
|
define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
|
|
mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv7a/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/
|
|
rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/
|
|
endef
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv5te-linux-gnueabi-sdk.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL = arago-toolchain-2011.09-sources.tar.bz2
|
|
define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
|
|
mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv5te/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/
|
|
rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/
|
|
endef
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries
|
|
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries
|
|
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.05-27-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201411),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.11-22-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201505),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = mips-2015.05-18-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201505_LIB_NAMES_FIX
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2013.05-43-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_SANITIZE_KERNEL_HEADERS
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201405),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2014.05-47-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-mentor-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.03-35-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.09-61-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = ia32-2011.09-24-i686-pc-linux-gnu-i386-linux.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64_201405),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/x86_64-amd-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = amd-2014.05-25-x86_64-amd-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2013R1/2013R1-RC1/i386
|
|
TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2013R1-RC1.i386.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2013R1-RC1.i386.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386
|
|
TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries
|
|
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux.tar.xz
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/aarch64-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = aarch64-2014.05-30-aarch64-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
|
|
TOOLCHAIN_EXTERNAL_VERSION = 1.1.6
|
|
TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION)
|
|
ifeq ($(BR2_arm),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_armeb),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_i386),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_microblazebe),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_mips),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_mipsel),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_powerpc),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_x86_64),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
endif
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_SYNOPSYS_ARC_2014_12),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2014.12
|
|
ifeq ($(BR2_arc750d)$(BR2_arc770d),y)
|
|
TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = arc700
|
|
else
|
|
TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = archs
|
|
endif
|
|
ifeq ($(BR2_arcle),y)
|
|
TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = le
|
|
else
|
|
TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = be
|
|
endif
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arc_gnu_2014.12_prebuilt_uclibc_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS)_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE)_linux_install.tar.gz
|
|
else
|
|
# Custom toolchain
|
|
TOOLCHAIN_EXTERNAL_SITE = $(patsubst %/,%,$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))))
|
|
TOOLCHAIN_EXTERNAL_SOURCE = $(notdir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
|
|
# We can't check hashes for custom downloaded toolchains
|
|
BR_NO_CHECK_HASH_FOR += $(TOOLCHAIN_EXTERNAL_SOURCE)
|
|
endif
|
|
|
|
# Some toolchain vendors have a regular file naming pattern.
|
|
# For them, mass-define _ACTUAL_SOURCE_TARBALL based _SITE.
|
|
ifneq ($(findstring sourcery.mentor.com/public/gnu_toolchain,$(TOOLCHAIN_EXTERNAL_SITE)),)
|
|
TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL ?= \
|
|
$(subst -i686-pc-linux-gnu.tar.bz2,.src.tar.bz2,$(subst -i686-pc-linux-gnu-i386-linux.tar.bz2,-i686-pc-linux-gnu.src.tar.bz2,$(TOOLCHAIN_EXTERNAL_SOURCE)))
|
|
else ifneq ($(findstring http://releases.linaro.org,$(TOOLCHAIN_EXTERNAL_SITE)),)
|
|
TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL ?= \
|
|
$(subst _linux.tar.xz,_src.tar.bz2,$(TOOLCHAIN_EXTERNAL_SOURCE))
|
|
endif
|
|
|
|
# In fact, we don't need to download the toolchain, since it is already
|
|
# available on the system, so force the site and source to be empty so
|
|
# that nothing will be downloaded/extracted.
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED),y)
|
|
TOOLCHAIN_EXTERNAL_SITE =
|
|
TOOLCHAIN_EXTERNAL_SOURCE =
|
|
endif
|
|
|
|
TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO
|
|
|
|
TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES
|
|
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1),y)
|
|
# Special handling for Blackfin toolchain, because of the split in two
|
|
# tarballs, and the organization of tarball contents. The tarballs
|
|
# contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
|
|
# which themselves contain the toolchain. This is why we strip more
|
|
# components than usual.
|
|
define TOOLCHAIN_EXTERNAL_EXTRACT_CMDS
|
|
mkdir -p $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)
|
|
$(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_SOURCE)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) | \
|
|
$(TAR) --strip-components=3 --hard-dereference -C $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) $(TAR_OPTIONS) -
|
|
$(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS) | \
|
|
$(TAR) --strip-components=3 --hard-dereference -C $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) $(TAR_OPTIONS) -
|
|
endef
|
|
else ifneq ($(TOOLCHAIN_EXTERNAL_SOURCE),)
|
|
# Normal handling of toolchain tarball extraction.
|
|
define TOOLCHAIN_EXTERNAL_EXTRACT_CMDS
|
|
mkdir -p $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)
|
|
$(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_SOURCE)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) | \
|
|
$(TAR) --strip-components=1 --exclude='usr/lib/locale/*' -C $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) $(TAR_OPTIONS) -
|
|
$(TOOLCHAIN_EXTERNAL_FIXUP_CMDS)
|
|
endef
|
|
endif
|
|
|
|
# Returns the location of the libc.a file for the given compiler + flags
|
|
define toolchain_find_libc_a
|
|
$$(readlink -f $$(LANG=C $(1) -print-file-name=libc.a))
|
|
endef
|
|
|
|
# Returns the sysroot location for the given compiler + flags. We need
|
|
# to handle cases where libc.a is in:
|
|
#
|
|
# - lib/
|
|
# - usr/lib/
|
|
# - lib32/
|
|
# - lib64/
|
|
# - lib32-fp/ (Cavium toolchain)
|
|
# - lib64-fp/ (Cavium toolchain)
|
|
# - usr/lib/<tuple>/ (Linaro toolchain)
|
|
#
|
|
# And variations on these.
|
|
define toolchain_find_sysroot
|
|
$$(printf $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:(usr/)?lib(32|64)?([^/]*)?/([^/]*/)?libc\.a::')
|
|
endef
|
|
|
|
# Returns the lib subdirectory for the given compiler + flags (i.e
|
|
# typically lib32 or lib64 for some toolchains)
|
|
define toolchain_find_libdir
|
|
$$(printf $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:.*/(usr/)?(lib(32|64)?([^/]*)?)/([^/]*/)?libc.a:\2:')
|
|
endef
|
|
|
|
# Checks for an already installed toolchain: check the toolchain
|
|
# location, check that it supports sysroot, and then verify that it
|
|
# matches the configuration provided in Buildroot: ABI, C++ support,
|
|
# kernel headers version, type of C library and all C library features.
|
|
define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS
|
|
$(Q)$(call check_cross_compiler_exists,$(TOOLCHAIN_EXTERNAL_CC))
|
|
$(Q)$(call check_unusable_toolchain,$(TOOLCHAIN_EXTERNAL_CC))
|
|
$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
|
|
if test -z "$${SYSROOT_DIR}" ; then \
|
|
@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
$(call check_kernel_headers_version,\
|
|
$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\
|
|
$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
|
|
$(call check_gcc_version,$(TOOLCHAIN_EXTERNAL_CC),\
|
|
$(call qstrip,$(BR2_TOOLCHAIN_GCC_AT_LEAST))); \
|
|
if test "$(BR2_arm)" = "y" ; then \
|
|
$(call check_arm_abi,\
|
|
"$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\
|
|
$(TOOLCHAIN_EXTERNAL_READELF)) ; \
|
|
fi ; \
|
|
if test "$(BR2_INSTALL_LIBSTDCPP)" = "y" ; then \
|
|
$(call check_cplusplus,$(TOOLCHAIN_EXTERNAL_CXX)) ; \
|
|
fi ; \
|
|
if test "$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC)" = "y" ; then \
|
|
$(call check_uclibc,$${SYSROOT_DIR}) ; \
|
|
elif test "$(BR2_TOOLCHAIN_EXTERNAL_MUSL)" = "y" ; then \
|
|
$(call check_musl,$${SYSROOT_DIR}) ; \
|
|
else \
|
|
$(call check_glibc,$${SYSROOT_DIR}) ; \
|
|
fi
|
|
endef
|
|
|
|
# With the musl C library, the libc.so library directly plays the role
|
|
# of the dynamic library loader. We just need to create a symbolic
|
|
# link to libc.so with the appropriate name.
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y)
|
|
ifeq ($(BR2_i386),y)
|
|
MUSL_ARCH = i386
|
|
else ifeq ($(BR2_ARM_EABIHF),y)
|
|
MUSL_ARCH = armhf
|
|
else
|
|
MUSL_ARCH = $(ARCH)
|
|
endif
|
|
define TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
|
|
ln -sf libc.so $(TARGET_DIR)/lib/ld-musl-$(MUSL_ARCH).so.1
|
|
endef
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
|
|
endif
|
|
|
|
# Integration of the toolchain into Buildroot: find the main sysroot
|
|
# and the variant-specific sysroot, then copy the needed libraries to
|
|
# the $(TARGET_DIR) and copy the whole sysroot (libraries and headers)
|
|
# to $(STAGING_DIR).
|
|
#
|
|
# Variables are defined as follows:
|
|
#
|
|
# LIBC_A_LOCATION: location of the libc.a file in the default
|
|
# multilib variant (allows to find the main
|
|
# sysroot directory)
|
|
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/usr/lib/libc.a
|
|
#
|
|
# SYSROOT_DIR: the main sysroot directory, deduced from
|
|
# LIBC_A_LOCATION by removing the
|
|
# usr/lib[32|64]/libc.a part of the path.
|
|
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/
|
|
#
|
|
# ARCH_LIBC_A_LOCATION: location of the libc.a file in the selected
|
|
# multilib variant (taking into account the
|
|
# CFLAGS). Allows to find the sysroot of the
|
|
# selected multilib variant.
|
|
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/usr/lib/libc.a
|
|
#
|
|
# ARCH_SYSROOT_DIR: the sysroot of the selected multilib variant,
|
|
# deduced from ARCH_LIBC_A_LOCATION by removing
|
|
# usr/lib[32|64]/libc.a at the end of the path.
|
|
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/
|
|
#
|
|
# ARCH_LIB_DIR: 'lib', 'lib32' or 'lib64' depending on where libraries
|
|
# are stored. Deduced from ARCH_LIBC_A_LOCATION by
|
|
# looking at usr/lib??/libc.a.
|
|
# Ex: lib
|
|
#
|
|
# ARCH_SUBDIR: the relative location of the sysroot of the selected
|
|
# multilib variant compared to the main sysroot.
|
|
# Ex: mips16/soft-float/el
|
|
#
|
|
# SUPPORT_LIB_DIR: some toolchains, such as recent Linaro toolchains,
|
|
# store GCC support libraries (libstdc++,
|
|
# libgcc_s, etc.) outside of the sysroot. In
|
|
# this case, SUPPORT_LIB_DIR is set to a
|
|
# non-empty value, and points to the directory
|
|
# where these support libraries are
|
|
# available. Those libraries will be copied to
|
|
# our sysroot, and the directory will also be
|
|
# considered when searching libraries for copy
|
|
# to the target filesystem.
|
|
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS
|
|
$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
|
|
if test -z "$${SYSROOT_DIR}" ; then \
|
|
@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
SUPPORT_LIB_DIR="" ; \
|
|
if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
|
|
LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
|
|
if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \
|
|
SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
|
|
fi ; \
|
|
fi ; \
|
|
ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \
|
|
if test -z "$(BR2_STATIC_LIBS)" ; then \
|
|
$(call MESSAGE,"Copying external toolchain libraries to target...") ; \
|
|
for libs in $(LIB_EXTERNAL_LIBS); do \
|
|
$(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/lib); \
|
|
done ; \
|
|
for libs in $(USR_LIB_EXTERNAL_LIBS); do \
|
|
$(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/usr/lib); \
|
|
done ; \
|
|
fi ; \
|
|
if test "$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY)" = "y"; then \
|
|
$(call MESSAGE,"Copying gdbserver") ; \
|
|
gdbserver_found=0 ; \
|
|
for d in $${ARCH_SYSROOT_DIR}/usr $${ARCH_SYSROOT_DIR}/../debug-root/usr $${ARCH_SYSROOT_DIR}/usr/$${ARCH_LIB_DIR} ; do \
|
|
if test -f $${d}/bin/gdbserver ; then \
|
|
install -m 0755 -D $${d}/bin/gdbserver $(TARGET_DIR)/usr/bin/gdbserver ; \
|
|
gdbserver_found=1 ; \
|
|
break ; \
|
|
fi ; \
|
|
done ; \
|
|
if [ $${gdbserver_found} -eq 0 ] ; then \
|
|
echo "Could not find gdbserver in external toolchain" ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
fi
|
|
endef
|
|
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS
|
|
$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
|
|
if test -z "$${SYSROOT_DIR}" ; then \
|
|
@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
SUPPORT_LIB_DIR="" ; \
|
|
if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
|
|
LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
|
|
if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \
|
|
SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
|
|
fi ; \
|
|
fi ; \
|
|
ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \
|
|
$(call MESSAGE,"Copying external toolchain sysroot to staging...") ; \
|
|
$(call copy_toolchain_sysroot,$${SYSROOT_DIR},$${ARCH_SYSROOT_DIR},$${ARCH_SUBDIR},$${ARCH_LIB_DIR},$${SUPPORT_LIB_DIR})
|
|
endef
|
|
|
|
# Special installation target used on the Blackfin architecture when
|
|
# FDPIC is not the primary binary format being used, but the user has
|
|
# nonetheless requested the installation of the FDPIC libraries to the
|
|
# target filesystem.
|
|
ifeq ($(BR2_BFIN_INSTALL_FDPIC_SHARED),y)
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC
|
|
$(Q)$(call MESSAGE,"Install external toolchain FDPIC libraries to target...") ; \
|
|
FDPIC_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))/../../bfin-linux-uclibc/bin/bfin-linux-uclibc-gcc ; \
|
|
FDPIC_SYSROOT_DIR="$(call toolchain_find_sysroot,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
FDPIC_LIB_DIR="$(call toolchain_find_libdir,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
FDPIC_SUPPORT_LIB_DIR="" ; \
|
|
if test `find $${FDPIC_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
|
|
FDPIC_LIBSTDCPP_A_LOCATION=$$(LANG=C $${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
|
|
if [ -e "$${FDPIC_LIBSTDCPP_A_LOCATION}" ]; then \
|
|
FDPIC_SUPPORT_LIB_DIR=`readlink -f $${FDPIC_LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
|
|
fi ; \
|
|
fi ; \
|
|
for libs in $(LIB_EXTERNAL_LIBS); do \
|
|
$(call copy_toolchain_lib_root,$${FDPIC_SYSROOT_DIR},$${FDPIC_SUPPORT_LIB_DIR},$${FDPIC_LIB_DIR},$$libs,/lib); \
|
|
done ; \
|
|
for libs in $(USR_LIB_EXTERNAL_LIBS); do \
|
|
$(call copy_toolchain_lib_root,$${FDPIC_SYSROOT_DIR},$${FDPIC_SUPPORT_LIB_DIR},$${FDPIC_LIB_DIR},$$libs,/usr/lib); \
|
|
done
|
|
endef
|
|
endif
|
|
|
|
# Special installation target used on the Blackfin architecture when
|
|
# shared FLAT is not the primary format being used, but the user has
|
|
# nonetheless requested the installation of the shared FLAT libraries
|
|
# to the target filesystem. The flat libraries are found and linked
|
|
# according to the index in name "libN.so". Index 1 is reserved for
|
|
# the standard C library. Customer libraries can use 4 and above.
|
|
ifeq ($(BR2_BFIN_INSTALL_FLAT_SHARED),y)
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT
|
|
$(Q)$(call MESSAGE,"Install external toolchain FLAT libraries to target...") ; \
|
|
FLAT_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))../../bfin-uclinux/bin/bfin-uclinux-gcc ; \
|
|
FLAT_LIBC_A_LOCATION=`$${FLAT_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -mid-shared-library -print-file-name=libc`; \
|
|
if [ -f $${FLAT_LIBC_A_LOCATION} -a ! -h $${FLAT_LIBC_A_LOCATION} ] ; then \
|
|
$(INSTALL) -D $${FLAT_LIBC_A_LOCATION} $(TARGET_DIR)/lib/lib1.so; \
|
|
fi
|
|
endef
|
|
endif
|
|
|
|
# Build toolchain wrapper for preprocessor, C and C++ compiler and setup
|
|
# symlinks for everything else. Skip gdb symlink when we are building our
|
|
# own gdb to prevent two gdb's in output/host/usr/bin.
|
|
# The LTO support in gcc creates wrappers for ar, ranlib and nm which load
|
|
# the lto plugin. These wrappers are called *-gcc-ar, *-gcc-ranlib, and
|
|
# *-gcc-nm and should be used instead of the real programs when -flto is
|
|
# used. However, we should not add the toolchain wrapper for them, and they
|
|
# match the *cc-* pattern. Therefore, an additional case is added for *-ar,
|
|
# *-ranlib and *-nm.
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
|
|
$(Q)cd $(HOST_DIR)/usr/bin; \
|
|
for i in $(TOOLCHAIN_EXTERNAL_CROSS)*; do \
|
|
base=$${i##*/}; \
|
|
case "$$base" in \
|
|
*-ar|*-ranlib|*-nm) \
|
|
ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
|
|
;; \
|
|
*cc|*cc-*|*++|*++-*|*cpp) \
|
|
ln -sf toolchain-wrapper $$base; \
|
|
;; \
|
|
*gdb|*gdbtui) \
|
|
if test "$(BR2_PACKAGE_HOST_GDB)" != "y"; then \
|
|
ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
|
|
fi \
|
|
;; \
|
|
*) \
|
|
ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
|
|
;; \
|
|
esac; \
|
|
done
|
|
endef
|
|
|
|
# This sed magic is taken from Linux headers_install.sh script.
|
|
define TOOLCHAIN_EXTERNAL_SANITIZE_KERNEL_HEADERS
|
|
$(Q)$(call MESSAGE,"Sanitizing kernel headers")
|
|
find $(STAGING_DIR)/usr/include/linux/ -name "*.h" | xargs sed -r -i \
|
|
-e 's/([ \t(])(__user|__force|__iomem)[ \t]/\1/g' \
|
|
-e 's/__attribute_const__([ \t]|$$)/\1/g' \
|
|
-e 's@^#include <linux/compiler.h>@@' \
|
|
-e 's/(^|[^a-zA-Z0-9])__packed([^a-zA-Z0-9_]|$$)/\1__attribute__((packed))\2/g' \
|
|
-e 's/(^|[ \t(])(inline|asm|volatile)([ \t(]|$$)/\1__\2__\3/g' \
|
|
-e 's@#(ifndef|define|endif[ \t]*/[*])[ \t]*_UAPI@#\1 @'
|
|
endef
|
|
|
|
#
|
|
# Generate gdbinit file for use with Buildroot
|
|
#
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT
|
|
$(Q)if test -f $(TARGET_CROSS)gdb ; then \
|
|
$(call MESSAGE,"Installing gdbinit"); \
|
|
$(gen_gdbinit_file); \
|
|
fi
|
|
endef
|
|
|
|
# uClibc-ng dynamic loader is called ld-uClibc.so.1, but gcc is not
|
|
# patched specifically for uClibc-ng, so it continues to generate
|
|
# binaries that expect the dynamic loader to be named ld-uClibc.so.0,
|
|
# like with the original uClibc. Therefore, we create an additional
|
|
# symbolic link to make uClibc-ng systems work properly.
|
|
define TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO
|
|
$(Q)if test -e $(TARGET_DIR)/lib/ld-uClibc.so.1; then \
|
|
ln -sf ld-uClibc.so.1 $(TARGET_DIR)/lib/ld-uClibc.so.0 ; \
|
|
fi
|
|
$(Q)if test -e $(TARGET_DIR)/lib/ld64-uClibc.so.1; then \
|
|
ln -sf ld64-uClibc.so.1 $(TARGET_DIR)/lib/ld64-uClibc.so.0 ; \
|
|
fi
|
|
endef
|
|
|
|
TOOLCHAIN_EXTERNAL_BUILD_CMDS = $(TOOLCHAIN_BUILD_WRAPPER)
|
|
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_STAGING_CMDS
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS)
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER)
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT)
|
|
endef
|
|
|
|
# Even though we're installing things in both the staging, the host
|
|
# and the target directory, we do everything within the
|
|
# install-staging step, arbitrarily.
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_CMDS
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS)
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC)
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT)
|
|
$(TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO)
|
|
endef
|
|
|
|
$(eval $(generic-package))
|