kumquat-buildroot/toolchain/toolchain-external/toolchain-external.mk
Thomas Petazzoni 28bca1cef5 toolchain-external: update Linaro toolchains
Bump the ARM, ARMeb and AArch64 Linaro toolchains from 14.08 to
14.09. We can't bump to 14.10, because they completely changed the
toolchains and they are now completely broken: they switched from
Crosstool-NG to a new build tool to generate the toolchain, and now
the sysroot handling is completely borked.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2014-11-11 21:15:26 +01:00

687 lines
34 KiB
Makefile

################################################################################
#
# toolchain-external
#
################################################################################
#
# This package implements the support for external toolchains, i.e
# toolchains that have not been produced by Buildroot itself and that
# Buildroot can download from the Web or that are already available on
# the system on which Buildroot runs. So far, we have tested this
# with:
#
# * Toolchains generated by Crosstool-NG
# * Toolchains generated by Buildroot
# * Toolchains provided by Linaro for the ARM and AArch64
# architectures
# * Sourcery CodeBench toolchains (from Mentor Graphics) for the ARM,
# MIPS, PowerPC, x86, x86_64 and NIOS 2 architectures. For the MIPS
# toolchain, the -muclibc variant isn't supported yet, only the
# default glibc-based variant is.
# * Analog Devices toolchains for the Blackfin architecture
# * Xilinx toolchains for the Microblaze architecture
#
# The basic principle is the following
#
# 1. If the toolchain is not pre-installed, download and extract it
# in $(TOOLCHAIN_EXTERNAL_INSTALL_DIR). Otherwise,
# $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) points to were the toolchain has
# already been installed by the user.
#
# 2. For all external toolchains, perform some checks on the
# conformity between the toolchain configuration described in the
# Buildroot menuconfig system, and the real configuration of the
# external toolchain. This is for example important to make sure that
# the Buildroot configuration system knows whether the toolchain
# supports RPC, IPv6, locales, large files, etc. Unfortunately, these
# things cannot be detected automatically, since the value of these
# options (such as BR2_TOOLCHAIN_HAS_NATIVE_RPC) are needed at
# configuration time because these options are used as dependencies
# for other options. And at configuration time, we are not able to
# retrieve the external toolchain configuration.
#
# 3. Copy the libraries needed at runtime to the target directory,
# $(TARGET_DIR). Obviously, things such as the C library, the dynamic
# loader and a few other utility libraries are needed if dynamic
# applications are to be executed on the target system.
#
# 4. Copy the libraries and headers to the staging directory. This
# will allow all further calls to gcc to be made using --sysroot
# $(STAGING_DIR), which greatly simplifies the compilation of the
# packages when using external toolchains. So in the end, only the
# cross-compiler binaries remains external, all libraries and headers
# are imported into the Buildroot tree.
#
# 5. Build a toolchain wrapper which executes the external toolchain
# with a number of arguments (sysroot/march/mtune/..) hardcoded,
# so we're sure the correct configuration is always used and the
# toolchain behaves similar to an internal toolchain.
# This toolchain wrapper and symlinks are installed into
# $(HOST_DIR)/usr/bin like for the internal toolchains, and the rest
# of Buildroot is handled identical for the 2 toolchain types.
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC),y)
LIB_EXTERNAL_LIBS += libc.so.* libcrypt.so.* libdl.so.* libgcc_s.so.* libm.so.* libnsl.so.* libresolv.so.* librt.so.* libutil.so.*
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_ARM_EABIHF),yy)
LIB_EXTERNAL_LIBS += ld-linux-armhf.so.*
else
LIB_EXTERNAL_LIBS += ld*.so.*
endif
ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
LIB_EXTERNAL_LIBS += libpthread.so.*
ifneq ($(BR2_PACKAGE_GDB)$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY),)
LIB_EXTERNAL_LIBS += libthread_db.so.*
endif # gdbserver
endif # ! no threads
endif
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y)
LIB_EXTERNAL_LIBS += libnss_files.so.* libnss_dns.so.*
endif
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y)
LIB_EXTERNAL_LIBS += libc.so libgcc_s.so.*
endif
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
USR_LIB_EXTERNAL_LIBS += libstdc++.so.*
endif
LIB_EXTERNAL_LIBS += $(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS))
# Details about sysroot directory selection.
#
# To find the sysroot directory, we use the trick of looking for the
# 'libc.a' file with the -print-file-name gcc option, and then
# mangling the path to find the base directory of the sysroot.
#
# Note that we do not use the -print-sysroot option, because it is
# only available since gcc 4.4.x, and we still support 4.2.x (for
# AVR32) and 4.3.x.
#
# When doing this, we don't pass any option to gcc that could select a
# multilib variant (such as -march) as we want the "main" sysroot,
# which contains all variants of the C library in the case of multilib
# toolchains. We use the TARGET_CC_NO_SYSROOT variable, which is the
# path of the cross-compiler, without the --sysroot=$(STAGING_DIR),
# since what we want to find is the location of the original toolchain
# sysroot. This "main" sysroot directory is stored in SYSROOT_DIR.
#
# Then, multilib toolchains are a little bit more complicated, since
# they in fact have multiple sysroots, one for each variant supported
# by the toolchain. So we need to find the particular sysroot we're
# interested in.
#
# To do so, we ask the compiler where its sysroot is by passing all
# flags (including -march and al.), except the --sysroot flag since we
# want to the compiler to tell us where its original sysroot
# is. ARCH_SUBDIR will contain the subdirectory, in the main
# SYSROOT_DIR, that corresponds to the selected architecture
# variant. ARCH_SYSROOT_DIR will contain the full path to this
# location.
#
# One might wonder why we don't just bother with ARCH_SYSROOT_DIR. The
# fact is that in multilib toolchains, the header files are often only
# present in the main sysroot, and only the libraries are available in
# each variant-specific sysroot directory.
TOOLCHAIN_EXTERNAL_PREFIX = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX))
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y)
TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(HOST_DIR)/opt/ext-toolchain
else
TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH))
endif
ifeq ($(TOOLCHAIN_EXTERNAL_INSTALL_DIR),)
ifneq ($(TOOLCHAIN_EXTERNAL_PREFIX),)
# if no path set, figure it out from path
TOOLCHAIN_EXTERNAL_BIN := $(shell dirname $(shell which $(TOOLCHAIN_EXTERNAL_PREFIX)-gcc))
endif
else
ifeq ($(BR2_bfin),y)
TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin
else
TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin
endif
endif
TOOLCHAIN_EXTERNAL_CROSS = $(TOOLCHAIN_EXTERNAL_BIN)/$(TOOLCHAIN_EXTERNAL_PREFIX)-
TOOLCHAIN_EXTERNAL_CC = $(TOOLCHAIN_EXTERNAL_CROSS)gcc
TOOLCHAIN_EXTERNAL_CXX = $(TOOLCHAIN_EXTERNAL_CROSS)g++
TOOLCHAIN_EXTERNAL_READELF = $(TOOLCHAIN_EXTERNAL_CROSS)readelf
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS = -DBR_SYSROOT='"$(STAGING_SUBDIR)"'
ifeq ($(filter $(HOST_DIR)/%,$(TOOLCHAIN_EXTERNAL_BIN)),)
# TOOLCHAIN_EXTERNAL_BIN points outside HOST_DIR => absolute path
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += \
-DBR_CROSS_PATH_ABS='"$(TOOLCHAIN_EXTERNAL_BIN)"'
else
# TOOLCHAIN_EXTERNAL_BIN points inside HOST_DIR => relative path
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += \
-DBR_CROSS_PATH_REL='"$(TOOLCHAIN_EXTERNAL_BIN:$(HOST_DIR)/%=%)"'
endif
ifeq ($(call qstrip,$(BR2_GCC_TARGET_CPU_REVISION)),)
CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU))
else
CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU)-$(BR2_GCC_TARGET_CPU_REVISION))
endif
CC_TARGET_ARCH_ := $(call qstrip,$(BR2_GCC_TARGET_ARCH))
CC_TARGET_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_ABI))
CC_TARGET_FPU_ := $(call qstrip,$(BR2_GCC_TARGET_FPU))
CC_TARGET_FLOAT_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI))
CC_TARGET_MODE_ := $(call qstrip,$(BR2_GCC_TARGET_MODE))
# march/mtune/floating point mode needs to be passed to the external toolchain
# to select the right multilib variant
ifeq ($(BR2_x86_64),y)
TOOLCHAIN_EXTERNAL_CFLAGS += -m64
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_64
endif
ifneq ($(CC_TARGET_ARCH_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -march=$(CC_TARGET_ARCH_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"'
endif
ifneq ($(CC_TARGET_CPU_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -mcpu=$(CC_TARGET_CPU_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"'
endif
ifneq ($(CC_TARGET_ABI_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -mabi=$(CC_TARGET_ABI_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"'
endif
ifneq ($(CC_TARGET_FPU_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -mfpu=$(CC_TARGET_FPU_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_FPU='"$(CC_TARGET_FPU_)"'
endif
ifneq ($(CC_TARGET_FLOAT_ABI_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -mfloat-abi=$(CC_TARGET_FLOAT_ABI_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_FLOAT_ABI='"$(CC_TARGET_FLOAT_ABI_)"'
endif
ifneq ($(CC_TARGET_MODE_),)
TOOLCHAIN_EXTERNAL_CFLAGS += -m$(CC_TARGET_MODE_)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_MODE='"$(CC_TARGET_MODE_)"'
endif
ifeq ($(BR2_BINFMT_FLAT),y)
TOOLCHAIN_EXTERNAL_CFLAGS += -Wl,-elf2flt
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_BINFMT_FLAT
endif
ifeq ($(BR2_mipsel)$(BR2_mips64el),y)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_MIPS_TARGET_LITTLE_ENDIAN
TOOLCHAIN_EXTERNAL_CFLAGS += -EL
endif
ifeq ($(BR2_mips)$(BR2_mips64),y)
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_MIPS_TARGET_BIG_ENDIAN
TOOLCHAIN_EXTERNAL_CFLAGS += -EB
endif
ifneq ($(BR2_TARGET_OPTIMIZATION),)
TOOLCHAIN_EXTERNAL_CFLAGS += $(call qstrip,$(BR2_TARGET_OPTIMIZATION))
# We create a list like '"-mfoo", "-mbar", "-mbarfoo"' so that each
# flag is a separate argument when used in execv() by the external
# toolchain wrapper.
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ADDITIONAL_CFLAGS='$(foreach f,$(call qstrip,$(BR2_TARGET_OPTIMIZATION)),"$(f)",)'
endif
ifeq ($(BR2_SOFT_FLOAT),y)
TOOLCHAIN_EXTERNAL_CFLAGS += -msoft-float
TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_SOFTFLOAT=1
endif
# The Linaro ARMhf toolchain expects the libraries in
# {/usr,}/lib/arm-linux-gnueabihf, but Buildroot copies them to
# {/usr,}/lib, so we need to create a symbolic link.
define TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
ln -sf . $(TARGET_DIR)/lib/arm-linux-gnueabihf
ln -sf . $(TARGET_DIR)/usr/lib/arm-linux-gnueabihf
endef
define TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
ln -sf . $(TARGET_DIR)/lib/armeb-linux-gnueabihf
ln -sf . $(TARGET_DIR)/usr/lib/armeb-linux-gnueabihf
endef
define TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
ln -sf . $(TARGET_DIR)/lib/aarch64-linux-gnu
ln -sf . $(TARGET_DIR)/usr/lib/aarch64-linux-gnu
endef
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi/
TOOLCHAIN_EXTERNAL_SOURCE = arm-2013.05-24-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi/
TOOLCHAIN_EXTERNAL_SOURCE = arm-2013.11-33-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201405),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi/
TOOLCHAIN_EXTERNAL_SOURCE = arm-2014.05-29-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109),y)
TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports/
TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv7a-linux-gnueabi-sdk.tar.bz2
define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv7a/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/
rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/
endef
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109),y)
TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports/
TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv5te-linux-gnueabi-sdk.tar.bz2
define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv5te/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/
rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/
endef
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y)
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries/
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries/
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.05-66-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.11-36-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.05-27-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2013.05-43-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_SANITIZE_KERNEL_HEADERS
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201405),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2014.05-47-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-mentor-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.03-35-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209),y)
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.09-61-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109),y)
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = ia32-2011.09-24-i686-pc-linux-gnu-i386-linux.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y)
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y)
TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2012R2/2012R2-RC2/i386/
TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R2-RC2.i386.tar.bz2
TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2012R2-RC2.i386.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y)
TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2013R1/2013R1-RC1/i386/
TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2013R1-RC1.i386.tar.bz2
TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2013R1-RC1.i386.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1),y)
TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386/
TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2
TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3),y)
TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblazeel-unknown-linux-gnu_14.3_early.tar.xz
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2),y)
TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
TOOLCHAIN_EXTERNAL_SOURCE = microblazeel-unknown-linux-gnu.tgz
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3),y)
TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblaze-unknown-linux-gnu_14.3_early.tar.xz
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y)
TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
TOOLCHAIN_EXTERNAL_SOURCE = microblaze-unknown-linux-gnu.tgz
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y)
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries/
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux.tar.xz
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64),y)
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/aarch64-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE = aarch64-2014.05-30-aarch64-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
TOOLCHAIN_EXTERNAL_VERSION = 1.1.1
TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION)/
ifeq ($(BR2_arm),y)
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
else ifeq ($(BR2_armeb),y)
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
else ifeq ($(BR2_i386),y)
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
else ifeq ($(BR2_microblazebe),y)
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
else ifeq ($(BR2_mips),y)
ifeq ($(BR2_SOFT_FLOAT),y)
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
else
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
endif # BR2_SOFT_FLOAT
else ifeq ($(BR2_mipsel),y)
ifeq ($(BR2_SOFT_FLOAT),y)
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
else
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
endif # BR2_SOFT_FLOAT
else ifeq ($(BR2_powerpc),y)
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
else ifeq ($(BR2_x86_64),y)
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
endif
else
# Custom toolchain
TOOLCHAIN_EXTERNAL_SITE = $(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
TOOLCHAIN_EXTERNAL_SOURCE = $(notdir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
endif
# In fact, we don't need to download the toolchain, since it is already
# available on the system, so force the site and source to be empty so
# that nothing will be downloaded/extracted.
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED),y)
TOOLCHAIN_EXTERNAL_SITE =
TOOLCHAIN_EXTERNAL_SOURCE =
endif
TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO
TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1),y)
# Special handling for Blackfin toolchain, because of the split in two
# tarballs, and the organization of tarball contents. The tarballs
# contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
# which themselves contain the toolchain. This is why we strip more
# components than usual.
define TOOLCHAIN_EXTERNAL_EXTRACT_CMDS
mkdir -p $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)
$(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_SOURCE)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) | \
$(TAR) $(TAR_STRIP_COMPONENTS)=3 --hard-dereference -C $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) $(TAR_OPTIONS) -
$(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS) | \
$(TAR) $(TAR_STRIP_COMPONENTS)=3 --hard-dereference -C $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) $(TAR_OPTIONS) -
endef
else ifneq ($(TOOLCHAIN_EXTERNAL_SOURCE),)
# Normal handling of toolchain tarball extraction.
define TOOLCHAIN_EXTERNAL_EXTRACT_CMDS
mkdir -p $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)
$(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_SOURCE)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) | \
$(TAR) $(TAR_STRIP_COMPONENTS)=1 --exclude='usr/lib/locale/*' -C $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) $(TAR_OPTIONS) -
$(TOOLCHAIN_EXTERNAL_FIXUP_CMDS)
endef
endif
# Returns the location of the libc.a file for the given compiler + flags
define toolchain_find_libc_a
$$(readlink -f $$(LANG=C $(1) -print-file-name=libc.a))
endef
# Returns the sysroot location for the given compiler + flags
define toolchain_find_sysroot
$$(echo -n $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:(usr/)?lib(32|64)?/([^/]*/)?libc\.a::')
endef
# Returns the lib subdirectory for the given compiler + flags (i.e
# typically lib32 or lib64 for some toolchains)
define toolchain_find_libdir
$$(echo -n $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:.*/(usr/)?(lib(32|64)?)/([^/]*/)?libc.a:\2:')
endef
# Checks for an already installed toolchain: check the toolchain
# location, check that it supports sysroot, and then verify that it
# matches the configuration provided in Buildroot: ABI, C++ support,
# kernel headers version, type of C library and all C library features.
define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS
$(Q)$(call check_cross_compiler_exists,$(TOOLCHAIN_EXTERNAL_CC))
$(Q)$(call check_unusable_toolchain,$(TOOLCHAIN_EXTERNAL_CC))
$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
if test -z "$${SYSROOT_DIR}" ; then \
@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
exit 1 ; \
fi ; \
$(call check_kernel_headers_version,\
$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\
$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
if test "$(BR2_arm)" = "y" ; then \
$(call check_arm_abi,\
"$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\
$(TOOLCHAIN_EXTERNAL_READELF)) ; \
fi ; \
if test "$(BR2_INSTALL_LIBSTDCPP)" = "y" ; then \
$(call check_cplusplus,$(TOOLCHAIN_EXTERNAL_CXX)) ; \
fi ; \
if test "$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC)" = "y" ; then \
$(call check_uclibc,$${SYSROOT_DIR}) ; \
elif test "$(BR2_TOOLCHAIN_EXTERNAL_MUSL)" = "y" ; then \
$(call check_musl,$${SYSROOT_DIR}) ; \
else \
$(call check_glibc,$${SYSROOT_DIR}) ; \
fi
endef
# With the musl C library, the libc.so library directly plays the role
# of the dynamic library loader. We just need to create a symbolic
# link to libc.so with the appropriate name.
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y)
ifeq ($(BR2_i386),y)
MUSL_ARCH = i386
else
MUSL_ARCH = $(ARCH)
endif
define TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
ln -sf libc.so $(TARGET_DIR)/lib/ld-musl-$(MUSL_ARCH).so.1
endef
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
endif
# Integration of the toolchain into Buildroot: find the main sysroot
# and the variant-specific sysroot, then copy the needed libraries to
# the $(TARGET_DIR) and copy the whole sysroot (libraries and headers)
# to $(STAGING_DIR).
#
# Variables are defined as follows:
#
# LIBC_A_LOCATION: location of the libc.a file in the default
# multilib variant (allows to find the main
# sysroot directory)
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/usr/lib/libc.a
#
# SYSROOT_DIR: the main sysroot directory, deduced from
# LIBC_A_LOCATION by removing the
# usr/lib[32|64]/libc.a part of the path.
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/
#
# ARCH_LIBC_A_LOCATION: location of the libc.a file in the selected
# multilib variant (taking into account the
# CFLAGS). Allows to find the sysroot of the
# selected multilib variant.
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/usr/lib/libc.a
#
# ARCH_SYSROOT_DIR: the sysroot of the selected multilib variant,
# deduced from ARCH_LIBC_A_LOCATION by removing
# usr/lib[32|64]/libc.a at the end of the path.
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/
#
# ARCH_LIB_DIR: 'lib', 'lib32' or 'lib64' depending on where libraries
# are stored. Deduced from ARCH_LIBC_A_LOCATION by
# looking at usr/lib??/libc.a.
# Ex: lib
#
# ARCH_SUBDIR: the relative location of the sysroot of the selected
# multilib variant compared to the main sysroot.
# Ex: mips16/soft-float/el
#
# SUPPORT_LIB_DIR: some toolchains, such as recent Linaro toolchains,
# store GCC support libraries (libstdc++,
# libgcc_s, etc.) outside of the sysroot. In
# this case, SUPPORT_LIB_DIR is set to a
# non-empty value, and points to the directory
# where these support libraries are
# available. Those libraries will be copied to
# our sysroot, and the directory will also be
# considered when searching libraries for copy
# to the target filesystem.
define TOOLCHAIN_EXTERNAL_INSTALL_CORE
$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
if test -z "$${SYSROOT_DIR}" ; then \
@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
exit 1 ; \
fi ; \
ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
SUPPORT_LIB_DIR="" ; \
if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \
SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
fi ; \
fi ; \
ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \
if test -z "$(BR2_PREFER_STATIC_LIB)" ; then \
$(call MESSAGE,"Copying external toolchain libraries to target...") ; \
for libs in $(LIB_EXTERNAL_LIBS); do \
$(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/lib); \
done ; \
for libs in $(USR_LIB_EXTERNAL_LIBS); do \
$(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/usr/lib); \
done ; \
fi ; \
$(call MESSAGE,"Copying external toolchain sysroot to staging...") ; \
$(call copy_toolchain_sysroot,$${SYSROOT_DIR},$${ARCH_SYSROOT_DIR},$${ARCH_SUBDIR},$${ARCH_LIB_DIR},$${SUPPORT_LIB_DIR}) ; \
if test "$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY)" = "y"; then \
$(call MESSAGE,"Copying gdbserver") ; \
gdbserver_found=0 ; \
for d in $${ARCH_SYSROOT_DIR}/usr $${ARCH_SYSROOT_DIR}/../debug-root/usr $${ARCH_SYSROOT_DIR}/usr/$${ARCH_LIB_DIR} ; do \
if test -f $${d}/bin/gdbserver ; then \
install -m 0755 -D $${d}/bin/gdbserver $(TARGET_DIR)/usr/bin/gdbserver ; \
gdbserver_found=1 ; \
break ; \
fi ; \
done ; \
if [ $${gdbserver_found} -eq 0 ] ; then \
echo "Could not find gdbserver in external toolchain" ; \
exit 1 ; \
fi ; \
fi
endef
# Special installation target used on the Blackfin architecture when
# FDPIC is not the primary binary format being used, but the user has
# nonetheless requested the installation of the FDPIC libraries to the
# target filesystem.
ifeq ($(BR2_BFIN_INSTALL_FDPIC_SHARED),y)
define TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC
$(Q)$(call MESSAGE,"Install external toolchain FDPIC libraries to target...") ; \
FDPIC_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))/../../bfin-linux-uclibc/bin/bfin-linux-uclibc-gcc ; \
FDPIC_SYSROOT_DIR="$(call toolchain_find_sysroot,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
FDPIC_LIB_DIR="$(call toolchain_find_libdir,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
FDPIC_SUPPORT_LIB_DIR="" ; \
if test `find $${FDPIC_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
FDPIC_LIBSTDCPP_A_LOCATION=$$(LANG=C $${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
if [ -e "$${FDPIC_LIBSTDCPP_A_LOCATION}" ]; then \
FDPIC_SUPPORT_LIB_DIR=`readlink -f $${FDPIC_LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
fi ; \
fi ; \
for libs in $(LIB_EXTERNAL_LIBS); do \
$(call copy_toolchain_lib_root,$${FDPIC_SYSROOT_DIR},$${FDPIC_SUPPORT_LIB_DIR},$${FDPIC_LIB_DIR},$$libs,/lib); \
done ; \
for libs in $(USR_LIB_EXTERNAL_LIBS); do \
$(call copy_toolchain_lib_root,$${FDPIC_SYSROOT_DIR},$${FDPIC_SUPPORT_LIB_DIR},$${FDPIC_LIB_DIR},$$libs,/usr/lib); \
done
endef
endif
# Special installation target used on the Blackfin architecture when
# shared FLAT is not the primary format being used, but the user has
# nonetheless requested the installation of the shared FLAT libraries
# to the target filesystem. The flat libraries are found and linked
# according to the index in name "libN.so". Index 1 is reserved for
# the standard C library. Customer libraries can use 4 and above.
ifeq ($(BR2_BFIN_INSTALL_FLAT_SHARED),y)
define TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT
$(Q)$(call MESSAGE,"Install external toolchain FLAT libraries to target...") ; \
FLAT_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))../../bfin-uclinux/bin/bfin-uclinux-gcc ; \
FLAT_LIBC_A_LOCATION=`$${FLAT_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -mid-shared-library -print-file-name=libc`; \
if [ -f $${FLAT_LIBC_A_LOCATION} -a ! -h $${FLAT_LIBC_A_LOCATION} ] ; then \
$(INSTALL) -D $${FLAT_LIBC_A_LOCATION} $(TARGET_DIR)/lib/lib1.so; \
fi
endef
endif
# Build toolchain wrapper for preprocessor, C and C++ compiler and setup
# symlinks for everything else. Skip gdb symlink when we are building our
# own gdb to prevent two gdb's in output/host/usr/bin.
define TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
$(Q)$(call MESSAGE,"Building ext-toolchain wrapper")
mkdir -p $(HOST_DIR)/usr/bin; cd $(HOST_DIR)/usr/bin; \
for i in $(TOOLCHAIN_EXTERNAL_CROSS)*; do \
base=$${i##*/}; \
case "$$base" in \
*cc|*cc-*|*++|*++-*|*cpp) \
ln -sf ext-toolchain-wrapper $$base; \
;; \
*gdb|*gdbtui) \
if test "$(BR2_PACKAGE_HOST_GDB)" != "y"; then \
ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
fi \
;; \
*) \
ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
;; \
esac; \
done ;
# We use --hash-style=both to increase the compatibility of
# the generated binary with older platforms
$(HOSTCC) $(HOST_CFLAGS) $(TOOLCHAIN_EXTERNAL_WRAPPER_ARGS) -s -Wl,--hash-style=both \
toolchain/toolchain-external/ext-toolchain-wrapper.c \
-o $(HOST_DIR)/usr/bin/ext-toolchain-wrapper
endef
# This sed magic is taken from Linux headers_install.sh script.
define TOOLCHAIN_EXTERNAL_SANITIZE_KERNEL_HEADERS
$(Q)$(call MESSAGE,"Sanitizing kernel headers");
find $(STAGING_DIR)/usr/include/linux/ -name "*.h" | xargs sed -r -i \
-e 's/([ \t(])(__user|__force|__iomem)[ \t]/\1/g' \
-e 's/__attribute_const__([ \t]|$$)/\1/g' \
-e 's@^#include <linux/compiler.h>@@' \
-e 's/(^|[^a-zA-Z0-9])__packed([^a-zA-Z0-9_]|$$)/\1__attribute__((packed))\2/g' \
-e 's/(^|[ \t(])(inline|asm|volatile)([ \t(]|$$)/\1__\2__\3/g' \
-e 's@#(ifndef|define|endif[ \t]*/[*])[ \t]*_UAPI@#\1 @'
endef
define TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT
if test -f $(TARGET_CROSS)gdb ; then \
$(call gen_gdbinit_file) ; \
fi
endef
# Even though we're installing things in both the staging, the host
# and the target directory, we do everything within the
# install-staging step, arbitrarily.
define TOOLCHAIN_EXTERNAL_INSTALL_STAGING_CMDS
$(TOOLCHAIN_EXTERNAL_INSTALL_CORE)
$(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC)
$(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT)
$(TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER)
$(TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT)
endef
$(eval $(generic-package))