kumquat-buildroot/board/technexion/imx6ulpico
Fabio Estevam e0b507d31a imx6ulpico: linux.fragment: Disable CONFIG_SMP
imx6ul has currently an issue on kernel 4.7 that causes a stall when running
the "reboot" command.

This issue has been reported in the linux-arm-kernel mailing list, but we
don't have a proper fix at the moment.

This problem is not seen when SMP is disabled, so let's disable it for now
until a proper fix becomes available.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-08-05 09:15:22 +02:00
..
patches/linux
rootfs_overlay/lib/firmware/brcm
genimage.cfg
linux.fragment imx6ulpico: linux.fragment: Disable CONFIG_SMP 2016-08-05 09:15:22 +02:00
post-image.sh
readme.txt

*****************************
Technexion i.MX6UL Pico board
*****************************

This file documents the Buildroot support for the Technexion i.MX6UL Pico board.

Build
=====

First, configure Buildroot for the i.MX6UL Pico board:

  make imx6ulpico_defconfig

Build all components:

  make

You will find in output/images/ the following files:
  - imx6ul-pico-hobbit.dtb
  - rootfs.ext4
  - rootfs.tar
  - sdcard.img
  - u-boot.imx
  - zImage

Create a bootable SD card
=========================

In the U-Boot prompt lauch:

=> ums 0 mmc 0

This will mount the eMMC content in the host PC as a mass storage device.

To determine the device associated to the eMMC card have a look in the
/proc/partitions file:

  cat /proc/partitions

Buildroot prepares a bootable "sdcard.img" image in the output/images/
directory, ready to be dumped on the eMMC card. Launch the following
command as root:

  dd if=output/images/sdcard.img of=/dev/<your-sd-device>

*** WARNING! This will destroy all the card content. Use with care! ***

For details about the medium image layout, see the definition in
board/technexion/imx6ulpico/genimage.cfg.

Boot the i.MX6UL Pico board
=========================

To boot your newly created system:
- put a micro USB cable into the Debug USB Port and connect using a terminal
  emulator at 115200 bps, 8n1;
- power on the board.

Using Wifi
==========

# modprobe brcmfmac
# iwconfig wlan0 essid ACCESSPOINTNAME
# wpa_passphrase ACCESSPOINTNAME > /etc/wpa.conf
(enter the wifi password and press enter)
# wpa_supplicant -Dwext -iwlan0 -c /etc/wpa.conf &
# udhcpc -i wlan0
# ping buildroot.org

Enjoy!