kumquat-buildroot/board/friendlyarm/nanopi-neo2/readme.txt
Jagan Teki c7160a76c6 board: Add FriendlyARM Nanopi NEO2 support
Add initial support for FriendlyARM Nanopi NEO2 board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot

Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2017-12-20 18:51:39 +01:00

38 lines
998 B
Plaintext

Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Nanopi NEO2. With the current configuration
it will bring-up the board, and allow access through the serial console.
Nanopi NEO2 link:
http://nanopi.io/nanopi-neo2.html
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/FriendlyARM+NanoPi+NEO2
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make friendlyarm_nanopi_neo2_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Nanopi NEO2 and power it up. The console
is on the serial line, 115200 8N1.