NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
2b8ffe69b2
kumquat-buildroot/board/minnowboard
History
Carlos Santos 09b8b03491 configs/minnowboard_max: drop custom post-image script 
Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-27 12:21:22 +01:00
..
fs-overlay-graphical/etc
genimage.cfg
grub.cfg board/minnowboard: remove support for minnowboard 2017-03-05 21:56:42 +01:00
linux.config board/minnowboard: add CONFIG_IGB in Linux kernel config 2018-07-14 22:03:06 +02:00
post-build.sh board/minnowboard: remove support for minnowboard 2017-03-05 21:56:42 +01:00
readme.txt

readme.txt 

How to get started with the MinnowBoard MAX
===========================================

1. Build

  Apply the defconfig:

  $ make minnowboard_max_defconfig

  Add any additional packages required and build:

  $ make

2. Write the SD card

  The build process will create a SD card image in output/images.
  Write the image to an mSD card, insert into the MinnowBoard MAX
  and power the board on.

  $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync

  The system starts two consoles: one on the serial port
  and one on HDMI.

3. Enjoy

Additional information about this board can be found at
http://www.minnowboard.org/.