kumquat-buildroot/board/freescale/imx28evk/create-boot-sd.sh
Vincent Stehlé 0eb659d04e config: Add defconfig for Freescale i.MX28 EVK
The i.MX28 Evaluation Kit (or EVK) is Freescale's evaluation board based on the
i.MX287 Applications Processor.

This defconfig is based on mainline u-boot and Linux kernel.

Also, we add an SD card creation script and documentation, shamelessly based on
the ones for i.MX5/6 by Luca Ceresoli.

[Arnout: fixate U-Boot and kernel (headers) versions]

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-03 17:26:00 +02:00

98 lines
1.9 KiB
Bash
Executable File

#!/bin/sh
set -u
set -e
PROGNAME=$(basename $0)
usage()
{
echo "Create an SD card that boots on an i.MX28 EVK board."
echo
echo "Note: all data on the the card will be completely deleted!"
echo "Use with care!"
echo "Superuser permissions may be required to write to the device."
echo
echo "Usage: ${PROGNAME} <sd_block_device>"
echo "Arguments:"
echo " <sd_block_device> The device to be written to"
echo
echo "Example: ${PROGNAME} /dev/mmcblk0"
echo
}
if [ $# -ne 1 ]; then
usage
exit 1
fi
if [ $(id -u) -ne 0 ]; then
echo "${PROGNAME} must be run as root"
exit 1
fi
DEV=${1}
# The partition name prefix depends on the device name:
# - /dev/sde -> /dev/sde1
# - /dev/mmcblk0 -> /dev/mmcblk0p1
if echo ${DEV}|grep -q mmcblk ; then
PART="p"
else
PART=""
fi
PART1=${DEV}${PART}1
PART2=${DEV}${PART}2
PART3=${DEV}${PART}3
# Unmount the partitions if mounted
umount ${PART1} || true
umount ${PART2} || true
umount ${PART3} || true
# First, clear the card
dd if=/dev/zero of=${DEV} bs=1M count=20
sync
# Partition the card.
# SD layout for i.MX28 boot:
# - Special partition type 53 at sector 2048, containing an SD-SB-encapsulated u-boot
# - FAT partition containing zImage
# - ext2/3 partition formatted as ext2 or ext3, containing the root filesystem.
sfdisk --force -u S ${DEV} <<EOF
2048,2000,53
4048,16000,b
20048,,L
EOF
sync
# Copy the bootloader at offset 2048
# (We need to skip the partition table in the .sd, too.)
dd if=output/images/u-boot.sd of=${DEV}1 bs=1M
# Prepare a temp dir for mounting partitions
TMPDIR=$(mktemp -d)
# FAT partition: kernel
mkfs.vfat ${PART2}
mount ${PART2} ${TMPDIR}
cp output/images/*Image ${TMPDIR}/
cp output/images/*.dtb ${TMPDIR}/ || true
sync
umount ${TMPDIR}
# ext2 partition: root filesystem
mkfs.ext2 ${PART3}
mount ${PART3} ${TMPDIR}
tar -C ${TMPDIR}/ -xf output/images/rootfs.tar
sync
umount ${TMPDIR}
# Cleanup
rmdir ${TMPDIR}
sync
echo Done