NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
244ffaafd1
kumquat-buildroot/board/minnowboard
History
Ezequiel Garcia 244ffaafd1 minnowboard-max: Enable serial and HDMI consoles 
Following what's done in Raspberry Pi's defconfigs, let's
unify the consoles in Minnowboard Max defconfigs, providing
consoles on HDMI and serial port.

[Peter: use tty1 like on rpi]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-06-28 13:56:25 +02:00
..
fs-overlay-graphical board/minnowboard-max: Add a X-based graphical defconfig 2016-04-18 23:19:25 +02:00
genimage.cfg
grub-minnowboard-max.cfg configs/minnowboard_max: bump kernel to 4.6.1 2016-06-06 21:39:06 +02:00
grub-minnowboard.cfg board/minnowboard: Unify Minnowboard and Minnowboard MAX boards 2016-04-18 23:19:25 +02:00
linux-3.8.config
linux-4.6.config configs/minnowboard_max: bump kernel to 4.6.1 2016-06-06 21:39:06 +02:00
post-build.sh minnowboard-max: Enable serial and HDMI consoles 2016-06-28 13:56:25 +02:00
post-image.sh
readme.txt minnowboard-max: Enable serial and HDMI consoles 2016-06-28 13:56:25 +02:00

readme.txt 

How to get started with the MinnowBoard (MAX)
=============================================

1. Build

  Apply the defconfig:

  $ make minnowboard_defconfig

  Or, for the Minnowboard MAX board:

  $ make minnowboard_max_defconfig

  Add any additional packages required and build:

  $ make

2. Write the SD card

  The build process will create a SD card image in output/images.
  Write the image to an mSD card, insert into the MinnowBoard
  and power the board on.

  $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync

  The system starts two consoles: one on the serial port
  and one on HDMI.

3. Enjoy

Additional information about this board can be found at
http://www.minnowboard.org/.