kumquat-buildroot/board/beaglebone
Lothar Felten d53b266986 configs/beaglebone_qt5: new defconfig
Add a target configuration for the beaglebone that supports the SGX530
graphics acceleration and builds the qt5 demos with the eglfs backend.
The imagination technologies demos and fbv are also included. The Linux
kernel is based on the omap2plus defconfig, a config fragment adds the
required settings for SGX accelerator support.

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-15 17:39:46 +02:00
..
patches/linux configs/beaglebone: update kernel/uboot, add AM335x EVM support 2016-10-15 17:39:46 +02:00
genimage.cfg configs/beaglebone: update kernel/uboot, add AM335x EVM support 2016-10-15 17:39:46 +02:00
linux-4.1-sgx.fragment configs/beaglebone_qt5: new defconfig 2016-10-15 17:39:46 +02:00
post-image.sh configs/beaglebone: update kernel/uboot, add AM335x EVM support 2016-10-15 17:39:46 +02:00
readme.txt configs/beaglebone_qt5: new defconfig 2016-10-15 17:39:46 +02:00
uEnv.txt configs/beaglebone: update kernel/uboot, add AM335x EVM support 2016-10-15 17:39:46 +02:00

CircuitCo BeagleBone
Texas Instuments AM335x Evaluation Module (TMDXEVM3358)

Description
===========

This configuration will build a complete image for the beaglebone and
the TI AM335x-EVM, the board type is identified by the on-board
EEPROM. The configuration is based on the
ti-processor-sdk-02.00.00.00. Device tree blobs for beaglebone
variants and the evm-sk are built too.

For Qt5 support support use the beaglebone_qt5_defconfig.

How to build it
===============

Select the default configuration for the target:
$ make beaglebone_defconfig

Optional: modify the configuration:
$ make menuconfig

Build:
$ make

Result of the build
===================
output/images/
├── am335x-boneblack.dtb
├── am335x-bone.dtb
├── am335x-evm.dtb
├── am335x-evmsk.dtb
├── boot.vfat
├── MLO
├── rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── u-boot.img
├── uEnv.txt
└── zImage

To copy the image file to the sdcard use dd:
$ dd if=output/images/sdcard.img of=/dev/XXX

Tested hardware
===============
am335x-evm (rev. 1.1A)
beagleboneblack (rev. A5A)
beaglebone (rev. A6)

2016, Lothar Felten <lothar.felten@gmail.com>