NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
23781ab782
kumquat-buildroot/package/busybox/busybox.mk
Thomas De Schampheleire fdc5ad1588 infra/pkg-kconfig: incorporate oldconfig call to avoid endless rebuilds 
The configure step of the busybox package performs 'make oldconfig', which
causes the .config file to be updated. Thus, the .config file is more recent
than our stamp file .stamp_kconfig_fixup_done. On a subsequent build, our
dependency rules would kick in, and run the config fixup again, thus
kicking in the package's configure, build and install steps yet once
more, that, ad infinitum.

One solution is to modify kconfig-package to introduce an explicit touch of
the .kconfig_fixup_config_done stamp file, as post-configure hook.

Another solution, implemented by this patch, is to move the oldconfig call
from the package's .mk file to the kconfig-package infrastructure and make
sure it is done as part of the fixup commands. This way, the stamp file will
only be touched once, after the full fixup (including oldconfig) and no
endless rebuilds will occur.

Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2014-08-06 19:57:22 +02:00

228 lines
7.1 KiB
Makefile
Raw Blame History

################################################################################
#
# busybox
#
################################################################################
BUSYBOX_VERSION = 1.22.1
BUSYBOX_SITE = http://www.busybox.net/downloads
BUSYBOX_SOURCE = busybox-$(BUSYBOX_VERSION).tar.bz2
BUSYBOX_LICENSE = GPLv2
BUSYBOX_LICENSE_FILES = LICENSE
BUSYBOX_CFLAGS = \
$(TARGET_CFLAGS)
BUSYBOX_LDFLAGS = \
$(TARGET_LDFLAGS)
# Link against libtirpc if available so that we can leverage its RPC
# support for NFS mounting with BusyBox
ifeq ($(BR2_PACKAGE_LIBTIRPC),y)
BUSYBOX_DEPENDENCIES += libtirpc
BUSYBOX_CFLAGS += -I$(STAGING_DIR)/usr/include/tirpc/
# Don't use LDFLAGS for -ltirpc, because LDFLAGS is used for
# the non-final link of modules as well.
BUSYBOX_CFLAGS_busybox += -ltirpc
endif
BUSYBOX_BUILD_CONFIG = $(BUSYBOX_DIR)/.config
# Allows the build system to tweak CFLAGS
BUSYBOX_MAKE_ENV = \
$(TARGET_MAKE_ENV) \
CFLAGS="$(BUSYBOX_CFLAGS)" \
CFLAGS_busybox="$(BUSYBOX_CFLAGS_busybox)"
BUSYBOX_MAKE_OPTS = \
CC="$(TARGET_CC)" \
ARCH=$(KERNEL_ARCH) \
PREFIX="$(TARGET_DIR)" \
EXTRA_LDFLAGS="$(BUSYBOX_LDFLAGS)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
CONFIG_PREFIX="$(TARGET_DIR)" \
SKIP_STRIP=y
ifndef BUSYBOX_CONFIG_FILE
BUSYBOX_CONFIG_FILE = $(call qstrip,$(BR2_PACKAGE_BUSYBOX_CONFIG))
endif
BUSYBOX_KCONFIG_FILE = $(BUSYBOX_CONFIG_FILE)
BUSYBOX_KCONFIG_EDITORS = menuconfig xconfig gconfig
BUSYBOX_KCONFIG_OPT = $(BUSYBOX_MAKE_OPTS)
define BUSYBOX_PERMISSIONS
/bin/busybox f 4755 0 0 - - - - -
/usr/share/udhcpc/default.script f 755 0 0 - - - - -
endef
# If mdev will be used for device creation enable it and copy S10mdev to /etc/init.d
ifeq ($(BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV),y)
define BUSYBOX_INSTALL_MDEV_SCRIPT
[ -f $(TARGET_DIR)/etc/init.d/S10mdev ] || \
$(INSTALL) -D -m 0755 package/busybox/S10mdev \
$(TARGET_DIR)/etc/init.d/S10mdev
endef
define BUSYBOX_INSTALL_MDEV_CONF
[ -f $(TARGET_DIR)/etc/mdev.conf ] || \
$(INSTALL) -D -m 0644 package/busybox/mdev.conf \
$(TARGET_DIR)/etc/mdev.conf
endef
define BUSYBOX_SET_MDEV
$(call KCONFIG_ENABLE_OPT,CONFIG_MDEV,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MDEV_CONF,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MDEV_EXEC,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_MDEV_LOAD_FIRMWARE,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# sha passwords need USE_BB_CRYPT_SHA
ifeq ($(BR2_TARGET_GENERIC_PASSWD_SHA256)$(BR2_TARGET_GENERIC_PASSWD_SHA512),y)
define BUSYBOX_SET_CRYPT_SHA
$(call KCONFIG_ENABLE_OPT,CONFIG_USE_BB_CRYPT_SHA,$(BUSYBOX_BUILD_CONFIG))
endef
endif
ifeq ($(BR2_USE_MMU),y)
define BUSYBOX_SET_MMU
$(call KCONFIG_DISABLE_OPT,CONFIG_NOMMU,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_SET_MMU
$(call KCONFIG_ENABLE_OPT,CONFIG_NOMMU,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_DISABLE_OPT,CONFIG_SWAPONOFF,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_DISABLE_OPT,CONFIG_ASH,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_HUSH,$(BUSYBOX_BUILD_CONFIG))
endef
endif
ifeq ($(BR2_LARGEFILE),y)
define BUSYBOX_SET_LARGEFILE
$(call KCONFIG_ENABLE_OPT,CONFIG_LFS,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FDISK_SUPPORT_LARGE_DISKS,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_SET_LARGEFILE
$(call KCONFIG_DISABLE_OPT,CONFIG_LFS,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_DISABLE_OPT,CONFIG_FDISK_SUPPORT_LARGE_DISKS,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# If IPv6 is enabled then enable basic ifupdown support for it
ifeq ($(BR2_INET_IPV6),y)
define BUSYBOX_SET_IPV6
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_IPV6,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_FEATURE_IFUPDOWN_IPV6,$(BUSYBOX_BUILD_CONFIG))
endef
else
define BUSYBOX_SET_IPV6
$(call KCONFIG_DISABLE_OPT,CONFIG_FEATURE_IPV6,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_DISABLE_OPT,CONFIG_FEATURE_IFUPDOWN_IPV6,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# If we're using static libs do the same for busybox
ifeq ($(BR2_PREFER_STATIC_LIB),y)
define BUSYBOX_PREFER_STATIC
$(call KCONFIG_ENABLE_OPT,CONFIG_STATIC,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# Disable usage of inetd if netkit-base package is selected
ifeq ($(BR2_PACKAGE_NETKITBASE),y)
define BUSYBOX_NETKITBASE
$(call KCONFIG_DISABLE_OPT,CONFIG_INETD,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# Disable usage of telnetd if netkit-telnetd package is selected
ifeq ($(BR2_PACKAGE_NETKITTELNET),y)
define BUSYBOX_NETKITTELNET
$(call KCONFIG_DISABLE_OPT,CONFIG_TELNETD,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# Disable shadow passwords support if unsupported by the C library
ifeq ($(BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS),)
define BUSYBOX_INTERNAL_SHADOW_PASSWORDS
$(call KCONFIG_ENABLE_OPT,CONFIG_USE_BB_PWD_GRP,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_USE_BB_SHADOW,$(BUSYBOX_BUILD_CONFIG))
endef
endif
# We also need to use internal functions when using the musl C
# library, since some of them are not yet implemented by musl.
ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y)
define BUSYBOX_INTERNAL_SHADOW_PASSWORDS
$(call KCONFIG_ENABLE_OPT,CONFIG_USE_BB_PWD_GRP,$(BUSYBOX_BUILD_CONFIG))
$(call KCONFIG_ENABLE_OPT,CONFIG_USE_BB_SHADOW,$(BUSYBOX_BUILD_CONFIG))
endef
endif
ifeq ($(BR2_INIT_BUSYBOX),y)
define BUSYBOX_SET_INIT
$(call KCONFIG_ENABLE_OPT,CONFIG_INIT,$(BUSYBOX_BUILD_CONFIG))
endef
endif
define BUSYBOX_INSTALL_LOGGING_SCRIPT
if grep -q CONFIG_SYSLOGD=y $(@D)/.config; then \
[ -f $(TARGET_DIR)/etc/init.d/S01logging ] || \
$(INSTALL) -m 0755 -D package/busybox/S01logging \
$(TARGET_DIR)/etc/init.d/S01logging; \
else rm -f $(TARGET_DIR)/etc/init.d/S01logging; fi
endef
ifeq ($(BR2_PACKAGE_BUSYBOX_WATCHDOG),y)
define BUSYBOX_SET_WATCHDOG
$(call KCONFIG_ENABLE_OPT,CONFIG_WATCHDOG,$(BUSYBOX_BUILD_CONFIG))
endef
define BUSYBOX_INSTALL_WATCHDOG_SCRIPT
[ -f $(TARGET_DIR)/etc/init.d/S15watchdog ] || \
$(INSTALL) -D -m 0755 package/busybox/S15watchdog \
$(TARGET_DIR)/etc/init.d/S15watchdog && \
$(SED) s/PERIOD/$(call qstrip,$(BR2_PACKAGE_BUSYBOX_WATCHDOG_PERIOD))/ \
$(TARGET_DIR)/etc/init.d/S15watchdog
endef
endif
# Enable "noclobber" in install.sh, to prevent BusyBox from overwriting any
# full-blown versions of apps installed by other packages with sym/hard links.
define BUSYBOX_NOCLOBBER_INSTALL
$(SED) 's/^noclobber="0"$$/noclobber="1"/' $(@D)/applets/install.sh
endef
define BUSYBOX_KCONFIG_FIXUP_CMDS
$(BUSYBOX_SET_MMU)
$(BUSYBOX_SET_LARGEFILE)
$(BUSYBOX_SET_IPV6)
$(BUSYBOX_PREFER_STATIC)
$(BUSYBOX_SET_MDEV)
$(BUSYBOX_SET_CRYPT_SHA)
$(BUSYBOX_NETKITBASE)
$(BUSYBOX_NETKITTELNET)
$(BUSYBOX_INTERNAL_SHADOW_PASSWORDS)
$(BUSYBOX_SET_INIT)
$(BUSYBOX_SET_WATCHDOG)
endef
define BUSYBOX_CONFIGURE_CMDS
$(BUSYBOX_NOCLOBBER_INSTALL)
endef
define BUSYBOX_BUILD_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D)
endef
define BUSYBOX_INSTALL_TARGET_CMDS
$(BUSYBOX_MAKE_ENV) $(MAKE) $(BUSYBOX_MAKE_OPTS) -C $(@D) install
if [ ! -f $(TARGET_DIR)/usr/share/udhcpc/default.script ]; then \
$(INSTALL) -m 0755 -D package/busybox/udhcpc.script \
$(TARGET_DIR)/usr/share/udhcpc/default.script; \
fi
$(BUSYBOX_INSTALL_MDEV_SCRIPT)
$(BUSYBOX_INSTALL_MDEV_CONF)
$(BUSYBOX_INSTALL_LOGGING_SCRIPT)
$(BUSYBOX_INSTALL_WATCHDOG_SCRIPT)
endef
$(eval $(kconfig-package))
Reference in New Issue View Git Blame Copy Permalink