30344 lines
811 KiB
Diff
30344 lines
811 KiB
Diff
diff -urN -x CVS linux-2.6.24/MAINTAINERS linux-2.6/MAINTAINERS
|
|
--- linux-2.6.24/MAINTAINERS 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/MAINTAINERS 2008-01-16 13:15:25.000000000 +0200
|
|
@@ -437,7 +437,7 @@
|
|
|
|
ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
|
|
P: Andrew Victor
|
|
-M: andrew@sanpeople.com
|
|
+M: linux@maxim.org.za
|
|
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
|
|
W: http://maxim.org.za/at91_26.html
|
|
S: Maintained
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/Kconfig linux-2.6/arch/arm/Kconfig
|
|
--- linux-2.6.24/arch/arm/Kconfig 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/Kconfig 2008-02-18 22:56:04.000000000 +0200
|
|
@@ -180,8 +180,8 @@
|
|
bool "Atmel AT91"
|
|
select GENERIC_GPIO
|
|
help
|
|
- This enables support for systems based on the Atmel AT91RM9200
|
|
- and AT91SAM9xxx processors.
|
|
+ This enables support for systems based on the Atmel AT91RM9200,
|
|
+ AT91SAM9 and AT91CAP9 processors.
|
|
|
|
config ARCH_CLPS7500
|
|
bool "Cirrus CL-PS7500FE"
|
|
@@ -657,6 +657,7 @@
|
|
default 128 if ARCH_L7200
|
|
default 200 if ARCH_EBSA110 || ARCH_S3C2410
|
|
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
|
|
+ default AT91_TIMER_HZ if ARCH_AT91
|
|
default 100
|
|
|
|
config AEABI
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6/arch/arm/boot/compressed/head-at91rm9200.S
|
|
--- linux-2.6.24/arch/arm/boot/compressed/head-at91rm9200.S 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/boot/compressed/head-at91rm9200.S 2007-12-31 10:43:35.000000000 +0200
|
|
@@ -67,12 +67,36 @@
|
|
cmp r7, r3
|
|
beq 99f
|
|
|
|
+ @ emQbit ECB_AT91 : 1072
|
|
+ mov r3, #(MACH_TYPE_ECBAT91 & 0xff)
|
|
+ orr r3, r3, #(MACH_TYPE_ECBAT91 & 0xff00)
|
|
+ cmp r7, r3
|
|
+ beq 99f
|
|
+
|
|
@ Ajeco 1ARM : 1075
|
|
mov r3, #(MACH_TYPE_ONEARM & 0xff)
|
|
orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
|
|
cmp r7, r3
|
|
beq 99f
|
|
|
|
+ @ Promwad Chub : 1181
|
|
+ mov r3, #(MACH_TYPE_CHUB & 0xff)
|
|
+ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00)
|
|
+ cmp r7, r3
|
|
+ beq 99f
|
|
+
|
|
+ @ Sweda TMS-100: 1277
|
|
+ mov r3, #(MACH_TYPE_SWEDATMS & 0xff)
|
|
+ orr r3, r3, #(MACH_TYPE_SWEDATMS & 0xff00)
|
|
+ cmp r7, r3
|
|
+ beq 99f
|
|
+
|
|
+ @ eQ-3 HomeMatic: 1392
|
|
+ mov r3, #(MACH_TYPE_HOMEMATIC & 0xff)
|
|
+ orr r3, r3, #(MACH_TYPE_HOMEMATIC & 0xff00)
|
|
+ cmp r7, r3
|
|
+ beq 99f
|
|
+
|
|
@ Unknown board, use the AT91RM9200DK board
|
|
@ mov r7, #MACH_TYPE_AT91RM9200
|
|
mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91cap9adk_defconfig linux-2.6/arch/arm/configs/at91cap9adk_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/at91cap9adk_defconfig 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/at91cap9adk_defconfig 2008-02-18 22:52:04.000000000 +0200
|
|
@@ -0,0 +1,1143 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.24-rc8
|
|
+# Wed Jan 23 22:55:57 2008
|
|
+#
|
|
+CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
+# CONFIG_GENERIC_TIME is not set
|
|
+# CONFIG_GENERIC_CLOCKEVENTS is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
+CONFIG_VECTORS_BASE=0xffff0000
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+# CONFIG_LOCALVERSION_AUTO is not set
|
|
+# CONFIG_SWAP is not set
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+# CONFIG_RELAY is not set
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
+CONFIG_INITRAMFS_SOURCE=""
|
|
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
+CONFIG_SYSCTL=y
|
|
+# CONFIG_EMBEDDED is not set
|
|
+CONFIG_UID16=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_ALL is not set
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+# CONFIG_MODVERSIONS is not set
|
|
+# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+# CONFIG_IOSCHED_DEADLINE is not set
|
|
+# CONFIG_IOSCHED_CFQ is not set
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# System Type
|
|
+#
|
|
+# CONFIG_ARCH_AAEC2000 is not set
|
|
+# CONFIG_ARCH_INTEGRATOR is not set
|
|
+# CONFIG_ARCH_REALVIEW is not set
|
|
+# CONFIG_ARCH_VERSATILE is not set
|
|
+CONFIG_ARCH_AT91=y
|
|
+# CONFIG_ARCH_CLPS7500 is not set
|
|
+# CONFIG_ARCH_CLPS711X is not set
|
|
+# CONFIG_ARCH_CO285 is not set
|
|
+# CONFIG_ARCH_EBSA110 is not set
|
|
+# CONFIG_ARCH_EP93XX is not set
|
|
+# CONFIG_ARCH_FOOTBRIDGE is not set
|
|
+# CONFIG_ARCH_NETX is not set
|
|
+# CONFIG_ARCH_H720X is not set
|
|
+# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
+# CONFIG_ARCH_IOP32X is not set
|
|
+# CONFIG_ARCH_IOP33X is not set
|
|
+# CONFIG_ARCH_IXP23XX is not set
|
|
+# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
+# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_KS8695 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_MXC is not set
|
|
+# CONFIG_ARCH_PNX4008 is not set
|
|
+# CONFIG_ARCH_PXA is not set
|
|
+# CONFIG_ARCH_RPC is not set
|
|
+# CONFIG_ARCH_SA1100 is not set
|
|
+# CONFIG_ARCH_S3C2410 is not set
|
|
+# CONFIG_ARCH_SHARK is not set
|
|
+# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_DAVINCI is not set
|
|
+# CONFIG_ARCH_OMAP is not set
|
|
+
|
|
+#
|
|
+# Boot options
|
|
+#
|
|
+
|
|
+#
|
|
+# Power management
|
|
+#
|
|
+
|
|
+#
|
|
+# Atmel AT91 System-on-Chip
|
|
+#
|
|
+# CONFIG_ARCH_AT91RM9200 is not set
|
|
+# CONFIG_ARCH_AT91SAM9260 is not set
|
|
+# CONFIG_ARCH_AT91SAM9261 is not set
|
|
+# CONFIG_ARCH_AT91SAM9263 is not set
|
|
+# CONFIG_ARCH_AT91SAM9RL is not set
|
|
+CONFIG_ARCH_AT91CAP9=y
|
|
+# CONFIG_ARCH_AT91X40 is not set
|
|
+CONFIG_AT91_PMC_UNIT=y
|
|
+
|
|
+#
|
|
+# AT91CAP9 Board Type
|
|
+#
|
|
+CONFIG_MACH_AT91CAP9ADK=y
|
|
+
|
|
+#
|
|
+# AT91 Board Options
|
|
+#
|
|
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
|
|
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
|
|
+
|
|
+#
|
|
+# AT91 Feature Selections
|
|
+#
|
|
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
|
+CONFIG_AT91_TIMER_HZ=100
|
|
+
|
|
+#
|
|
+# Processor Type
|
|
+#
|
|
+CONFIG_CPU_32=y
|
|
+CONFIG_CPU_ARM926T=y
|
|
+CONFIG_CPU_32v5=y
|
|
+CONFIG_CPU_ABRT_EV5TJ=y
|
|
+CONFIG_CPU_CACHE_VIVT=y
|
|
+CONFIG_CPU_COPY_V4WB=y
|
|
+CONFIG_CPU_TLB_V4WBI=y
|
|
+CONFIG_CPU_CP15=y
|
|
+CONFIG_CPU_CP15_MMU=y
|
|
+
|
|
+#
|
|
+# Processor Features
|
|
+#
|
|
+# CONFIG_ARM_THUMB is not set
|
|
+# CONFIG_CPU_ICACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
+
|
|
+#
|
|
+# Bus support
|
|
+#
|
|
+# CONFIG_PCI_SYSCALL is not set
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Kernel Features
|
|
+#
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_PREEMPT is not set
|
|
+# CONFIG_NO_IDLE_HZ is not set
|
|
+CONFIG_HZ=100
|
|
+CONFIG_AEABI=y
|
|
+CONFIG_OABI_COMPAT=y
|
|
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
+CONFIG_BOUNCE=y
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+CONFIG_LEDS=y
|
|
+CONFIG_LEDS_TIMER=y
|
|
+CONFIG_LEDS_CPU=y
|
|
+CONFIG_ALIGNMENT_TRAP=y
|
|
+
|
|
+#
|
|
+# Boot options
|
|
+#
|
|
+CONFIG_ZBOOT_ROM_TEXT=0x0
|
|
+CONFIG_ZBOOT_ROM_BSS=0x0
|
|
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
|
|
+# CONFIG_XIP_KERNEL is not set
|
|
+# CONFIG_KEXEC is not set
|
|
+
|
|
+#
|
|
+# Floating point emulation
|
|
+#
|
|
+
|
|
+#
|
|
+# At least one emulation must be selected
|
|
+#
|
|
+CONFIG_FPE_NWFPE=y
|
|
+# CONFIG_FPE_NWFPE_XP is not set
|
|
+# CONFIG_FPE_FASTFPE is not set
|
|
+# CONFIG_VFP is not set
|
|
+
|
|
+#
|
|
+# Userspace binary formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_AOUT is not set
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+# CONFIG_PM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+# CONFIG_IP_PNP_DHCP is not set
|
|
+CONFIG_IP_PNP_BOOTP=y
|
|
+CONFIG_IP_PNP_RARP=y
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+# CONFIG_FW_LOADER is not set
|
|
+# CONFIG_DEBUG_DRIVER is not set
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+CONFIG_MTD_CMDLINE_PARTS=y
|
|
+# CONFIG_MTD_AFS_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+CONFIG_MTD_CFI=y
|
|
+CONFIG_MTD_JEDECPROBE=y
|
|
+CONFIG_MTD_GEN_PROBE=y
|
|
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_CFI_INTELEXT is not set
|
|
+CONFIG_MTD_CFI_AMDSTD=y
|
|
+# CONFIG_MTD_CFI_STAA is not set
|
|
+CONFIG_MTD_CFI_UTIL=y
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+CONFIG_MTD_PHYSMAP=y
|
|
+CONFIG_MTD_PHYSMAP_START=0x0
|
|
+CONFIG_MTD_PHYSMAP_LEN=0x0
|
|
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
|
|
+# CONFIG_MTD_ARM_INTEGRATOR is not set
|
|
+# CONFIG_MTD_IMPA7 is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+CONFIG_MTD_DATAFLASH=y
|
|
+# CONFIG_MTD_M25P80 is not set
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+CONFIG_MTD_NAND_AT91=y
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+# CONFIG_MTD_UBI is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=8192
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+CONFIG_ATMEL_SSC=y
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+CONFIG_SCSI_MULTI_LUN=y
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_MACB=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_SMC91X is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+CONFIG_INPUT_EVDEV=y
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+CONFIG_INPUT_TOUCHSCREEN=y
|
|
+CONFIG_TOUCHSCREEN_ADS7846=y
|
|
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
|
|
+# CONFIG_TOUCHSCREEN_GUNZE is not set
|
|
+# CONFIG_TOUCHSCREEN_ELO is not set
|
|
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
|
|
+# CONFIG_TOUCHSCREEN_MK712 is not set
|
|
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
|
|
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
|
|
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
|
|
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
|
|
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+# CONFIG_SERIO is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+# CONFIG_SERIAL_8250 is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_ATMEL=y
|
|
+CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=256
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+CONFIG_HW_RANDOM=y
|
|
+# CONFIG_NVRAM is not set
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+CONFIG_I2C=y
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
+CONFIG_I2C_CHARDEV=y
|
|
+
|
|
+#
|
|
+# I2C Algorithms
|
|
+#
|
|
+# CONFIG_I2C_ALGOBIT is not set
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
|
+
|
|
+#
|
|
+# I2C Hardware Bus support
|
|
+#
|
|
+# CONFIG_I2C_GPIO is not set
|
|
+# CONFIG_I2C_OCORES is not set
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
+# CONFIG_I2C_STUB is not set
|
|
+# CONFIG_I2C_TINY_USB is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous I2C Chip support
|
|
+#
|
|
+# CONFIG_SENSORS_DS1337 is not set
|
|
+# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
|
+# CONFIG_SENSORS_PCA9539 is not set
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+CONFIG_SPI=y
|
|
+# CONFIG_SPI_DEBUG is not set
|
|
+CONFIG_SPI_MASTER=y
|
|
+
|
|
+#
|
|
+# SPI Master Controller Drivers
|
|
+#
|
|
+CONFIG_SPI_ATMEL=y
|
|
+# CONFIG_SPI_BITBANG is not set
|
|
+
|
|
+#
|
|
+# SPI Protocol Masters
|
|
+#
|
|
+# CONFIG_SPI_AT25 is not set
|
|
+# CONFIG_SPI_SPIDEV is not set
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+CONFIG_WATCHDOG_NOWAYOUT=y
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# USB-based Watchdog Cards
|
|
+#
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
+
|
|
+#
|
|
+# Sonics Silicon Backplane
|
|
+#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+CONFIG_FB_ATMEL=y
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
|
|
+CONFIG_LOGO=y
|
|
+# CONFIG_LOGO_LINUX_MONO is not set
|
|
+CONFIG_LOGO_LINUX_VGA16=y
|
|
+# CONFIG_LOGO_LINUX_CLUT224 is not set
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+# CONFIG_SOUND is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+CONFIG_HID_DEBUG=y
|
|
+# CONFIG_HIDRAW is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+# CONFIG_USB_HID is not set
|
|
+
|
|
+#
|
|
+# USB HID Boot Protocol drivers
|
|
+#
|
|
+# CONFIG_USB_KBD is not set
|
|
+# CONFIG_USB_MOUSE is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+CONFIG_USB_DEVICEFS=y
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_ONETOUCH is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+CONFIG_USB_MON=y
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+# CONFIG_USB_TEST is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+# CONFIG_USB_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_AT91=y
|
|
+# CONFIG_MMC_SPI is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+# CONFIG_EXT2_FS_XATTR is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+# CONFIG_EXT3_FS is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+# CONFIG_FS_POSIX_ACL is not set
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+# CONFIG_MINIX_FS is not set
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+# CONFIG_MSDOS_FS is not set
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+CONFIG_JFFS2_FS=y
|
|
+CONFIG_JFFS2_FS_DEBUG=0
|
|
+CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
|
+# CONFIG_JFFS2_SUMMARY is not set
|
|
+# CONFIG_JFFS2_FS_XATTR is not set
|
|
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
+CONFIG_JFFS2_ZLIB=y
|
|
+# CONFIG_JFFS2_LZO is not set
|
|
+CONFIG_JFFS2_RTIME=y
|
|
+# CONFIG_JFFS2_RUBIN is not set
|
|
+CONFIG_CRAMFS=y
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
+CONFIG_NFS_FS=y
|
|
+# CONFIG_NFS_V3 is not set
|
|
+# CONFIG_NFS_V4 is not set
|
|
+# CONFIG_NFS_DIRECTIO is not set
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+# CONFIG_RPCSEC_GSS_KRB5 is not set
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+# CONFIG_PARTITION_ADVANCED is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+CONFIG_NLS_CODEPAGE_850=y
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+# CONFIG_NLS_CODEPAGE_936 is not set
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+# CONFIG_NLS_ASCII is not set
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+# CONFIG_DLM is not set
|
|
+CONFIG_INSTRUMENTATION=y
|
|
+# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+# CONFIG_MAGIC_SYSRQ is not set
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+CONFIG_DEBUG_FS=y
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+CONFIG_DEBUG_KERNEL=y
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
+CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
+# CONFIG_SCHEDSTATS is not set
|
|
+# CONFIG_TIMER_STATS is not set
|
|
+# CONFIG_DEBUG_SLAB is not set
|
|
+# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
+# CONFIG_RT_MUTEX_TESTER is not set
|
|
+# CONFIG_DEBUG_SPINLOCK is not set
|
|
+# CONFIG_DEBUG_MUTEXES is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
+# CONFIG_DEBUG_KOBJECT is not set
|
|
+CONFIG_DEBUG_BUGVERBOSE=y
|
|
+CONFIG_DEBUG_INFO=y
|
|
+# CONFIG_DEBUG_VM is not set
|
|
+# CONFIG_DEBUG_LIST is not set
|
|
+# CONFIG_DEBUG_SG is not set
|
|
+CONFIG_FRAME_POINTER=y
|
|
+CONFIG_FORCED_INLINING=y
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
+# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
+CONFIG_DEBUG_USER=y
|
|
+# CONFIG_DEBUG_ERRORS is not set
|
|
+# CONFIG_DEBUG_LL is not set
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
+# CONFIG_CRYPTO is not set
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_ZLIB_DEFLATE=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91rm9200dk_defconfig linux-2.6/arch/arm/configs/at91rm9200dk_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/at91rm9200dk_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/at91rm9200dk_defconfig 2007-12-31 10:43:35.000000000 +0200
|
|
@@ -620,14 +620,14 @@
|
|
#
|
|
# I2C Algorithms
|
|
#
|
|
-# CONFIG_I2C_ALGOBIT is not set
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
# CONFIG_I2C_ALGOPCF is not set
|
|
# CONFIG_I2C_ALGOPCA is not set
|
|
|
|
#
|
|
# I2C Hardware Bus support
|
|
#
|
|
-CONFIG_I2C_AT91=y
|
|
+CONFIG_I2C_GPIO=y
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
# CONFIG_I2C_STUB is not set
|
|
# CONFIG_I2C_PCA_ISA is not set
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91rm9200ek_defconfig linux-2.6/arch/arm/configs/at91rm9200ek_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/at91rm9200ek_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/at91rm9200ek_defconfig 2007-12-31 10:43:35.000000000 +0200
|
|
@@ -594,14 +594,14 @@
|
|
#
|
|
# I2C Algorithms
|
|
#
|
|
-# CONFIG_I2C_ALGOBIT is not set
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
# CONFIG_I2C_ALGOPCF is not set
|
|
# CONFIG_I2C_ALGOPCA is not set
|
|
|
|
#
|
|
# I2C Hardware Bus support
|
|
#
|
|
-CONFIG_I2C_AT91=y
|
|
+CONFIG_I2C_GPIO=y
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
# CONFIG_I2C_STUB is not set
|
|
# CONFIG_I2C_PCA_ISA is not set
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9260ek_defconfig linux-2.6/arch/arm/configs/at91sam9260ek_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/at91sam9260ek_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/at91sam9260ek_defconfig 2008-01-08 22:21:02.000000000 +0200
|
|
@@ -1,43 +1,56 @@
|
|
#
|
|
# Automatically generated make config: don't edit
|
|
-# Linux kernel version: 2.6.19-rc6
|
|
-# Fri Nov 17 18:42:21 2006
|
|
+# Linux kernel version: 2.6.24-rc7
|
|
+# Tue Jan 8 22:20:50 2008
|
|
#
|
|
CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
# CONFIG_GENERIC_TIME is not set
|
|
+# CONFIG_GENERIC_CLOCKEVENTS is not set
|
|
CONFIG_MMU=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
CONFIG_HARDIRQS_SW_RESEND=y
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
CONFIG_VECTORS_BASE=0xffff0000
|
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
#
|
|
-# Code maturity level options
|
|
+# General setup
|
|
#
|
|
CONFIG_EXPERIMENTAL=y
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
-
|
|
-#
|
|
-# General setup
|
|
-#
|
|
CONFIG_LOCALVERSION=""
|
|
# CONFIG_LOCALVERSION_AUTO is not set
|
|
# CONFIG_SWAP is not set
|
|
CONFIG_SYSVIPC=y
|
|
-# CONFIG_IPC_NS is not set
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
# CONFIG_POSIX_MQUEUE is not set
|
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
|
# CONFIG_TASKSTATS is not set
|
|
-# CONFIG_UTS_NS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
# CONFIG_AUDIT is not set
|
|
# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
# CONFIG_RELAY is not set
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
CONFIG_INITRAMFS_SOURCE=""
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
CONFIG_SYSCTL=y
|
|
@@ -53,30 +66,30 @@
|
|
CONFIG_ELF_CORE=y
|
|
CONFIG_BASE_FULL=y
|
|
CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
CONFIG_SHMEM=y
|
|
-CONFIG_SLAB=y
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
CONFIG_RT_MUTEXES=y
|
|
# CONFIG_TINY_SHMEM is not set
|
|
CONFIG_BASE_SMALL=0
|
|
-# CONFIG_SLOB is not set
|
|
-
|
|
-#
|
|
-# Loadable module support
|
|
-#
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
# CONFIG_MODVERSIONS is not set
|
|
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
CONFIG_KMOD=y
|
|
-
|
|
-#
|
|
-# Block layer
|
|
-#
|
|
CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
|
|
#
|
|
# IO Schedulers
|
|
@@ -108,12 +121,16 @@
|
|
# CONFIG_ARCH_NETX is not set
|
|
# CONFIG_ARCH_H720X is not set
|
|
# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
# CONFIG_ARCH_IOP32X is not set
|
|
# CONFIG_ARCH_IOP33X is not set
|
|
-# CONFIG_ARCH_IXP4XX is not set
|
|
-# CONFIG_ARCH_IXP2000 is not set
|
|
# CONFIG_ARCH_IXP23XX is not set
|
|
+# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_KS8695 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_MXC is not set
|
|
# CONFIG_ARCH_PNX4008 is not set
|
|
# CONFIG_ARCH_PXA is not set
|
|
# CONFIG_ARCH_RPC is not set
|
|
@@ -121,29 +138,52 @@
|
|
# CONFIG_ARCH_S3C2410 is not set
|
|
# CONFIG_ARCH_SHARK is not set
|
|
# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_DAVINCI is not set
|
|
# CONFIG_ARCH_OMAP is not set
|
|
|
|
#
|
|
+# Boot options
|
|
+#
|
|
+
|
|
+#
|
|
+# Power management
|
|
+#
|
|
+
|
|
+#
|
|
# Atmel AT91 System-on-Chip
|
|
#
|
|
# CONFIG_ARCH_AT91RM9200 is not set
|
|
CONFIG_ARCH_AT91SAM9260=y
|
|
# CONFIG_ARCH_AT91SAM9261 is not set
|
|
+# CONFIG_ARCH_AT91SAM9263 is not set
|
|
+# CONFIG_ARCH_AT91SAM9RL is not set
|
|
+# CONFIG_ARCH_AT91X40 is not set
|
|
+CONFIG_AT91_PMC_UNIT=y
|
|
+
|
|
+#
|
|
+# AT91SAM9260 Variants
|
|
+#
|
|
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
|
|
|
|
#
|
|
-# AT91SAM9260 Board Type
|
|
+# AT91SAM9260 / AT91SAM9XE Board Type
|
|
#
|
|
CONFIG_MACH_AT91SAM9260EK=y
|
|
+# CONFIG_MACH_CAM60 is not set
|
|
+# CONFIG_MACH_SAM9_L9260 is not set
|
|
|
|
#
|
|
# AT91 Board Options
|
|
#
|
|
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
|
|
# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
|
|
|
|
#
|
|
# AT91 Feature Selections
|
|
#
|
|
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
|
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
+CONFIG_AT91_TIMER_HZ=100
|
|
|
|
#
|
|
# Processor Type
|
|
@@ -166,19 +206,19 @@
|
|
# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
|
|
#
|
|
# Bus support
|
|
#
|
|
-
|
|
-#
|
|
-# PCCARD (PCMCIA/CardBus) support
|
|
-#
|
|
+# CONFIG_PCI_SYSCALL is not set
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
# CONFIG_PCCARD is not set
|
|
|
|
#
|
|
# Kernel Features
|
|
#
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
# CONFIG_PREEMPT is not set
|
|
# CONFIG_NO_IDLE_HZ is not set
|
|
CONFIG_HZ=100
|
|
@@ -191,8 +231,12 @@
|
|
CONFIG_FLATMEM=y
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
+CONFIG_BOUNCE=y
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
# CONFIG_LEDS is not set
|
|
CONFIG_ALIGNMENT_TRAP=y
|
|
|
|
@@ -203,6 +247,7 @@
|
|
CONFIG_ZBOOT_ROM_BSS=0x0
|
|
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
|
|
# CONFIG_XIP_KERNEL is not set
|
|
+# CONFIG_KEXEC is not set
|
|
|
|
#
|
|
# Floating point emulation
|
|
@@ -228,7 +273,7 @@
|
|
# Power management options
|
|
#
|
|
# CONFIG_PM is not set
|
|
-# CONFIG_APM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
|
|
#
|
|
# Networking
|
|
@@ -238,13 +283,9 @@
|
|
#
|
|
# Networking options
|
|
#
|
|
-# CONFIG_NETDEBUG is not set
|
|
CONFIG_PACKET=y
|
|
# CONFIG_PACKET_MMAP is not set
|
|
CONFIG_UNIX=y
|
|
-CONFIG_XFRM=y
|
|
-# CONFIG_XFRM_USER is not set
|
|
-# CONFIG_XFRM_SUB_POLICY is not set
|
|
# CONFIG_NET_KEY is not set
|
|
CONFIG_INET=y
|
|
# CONFIG_IP_MULTICAST is not set
|
|
@@ -263,33 +304,23 @@
|
|
# CONFIG_INET_IPCOMP is not set
|
|
# CONFIG_INET_XFRM_TUNNEL is not set
|
|
# CONFIG_INET_TUNNEL is not set
|
|
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
|
-CONFIG_INET_XFRM_MODE_TUNNEL=y
|
|
-CONFIG_INET_XFRM_MODE_BEET=y
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
CONFIG_INET_DIAG=y
|
|
CONFIG_INET_TCP_DIAG=y
|
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
|
CONFIG_TCP_CONG_CUBIC=y
|
|
CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
# CONFIG_IPV6 is not set
|
|
# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
# CONFIG_INET6_TUNNEL is not set
|
|
# CONFIG_NETWORK_SECMARK is not set
|
|
# CONFIG_NETFILTER is not set
|
|
-
|
|
-#
|
|
-# DCCP Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_IP_DCCP is not set
|
|
-
|
|
-#
|
|
-# SCTP Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_IP_SCTP is not set
|
|
-
|
|
-#
|
|
-# TIPC Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_TIPC is not set
|
|
# CONFIG_ATM is not set
|
|
# CONFIG_BRIDGE is not set
|
|
@@ -302,10 +333,6 @@
|
|
# CONFIG_LAPB is not set
|
|
# CONFIG_ECONET is not set
|
|
# CONFIG_WAN_ROUTER is not set
|
|
-
|
|
-#
|
|
-# QoS and/or fair queueing
|
|
-#
|
|
# CONFIG_NET_SCHED is not set
|
|
|
|
#
|
|
@@ -315,7 +342,17 @@
|
|
# CONFIG_HAMRADIO is not set
|
|
# CONFIG_IRDA is not set
|
|
# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
|
|
#
|
|
# Device Drivers
|
|
@@ -324,34 +361,17 @@
|
|
#
|
|
# Generic Driver Options
|
|
#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
CONFIG_STANDALONE=y
|
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
# CONFIG_FW_LOADER is not set
|
|
# CONFIG_DEBUG_DRIVER is not set
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
# CONFIG_SYS_HYPERVISOR is not set
|
|
-
|
|
-#
|
|
-# Connector - unified userspace <-> kernelspace linker
|
|
-#
|
|
# CONFIG_CONNECTOR is not set
|
|
-
|
|
-#
|
|
-# Memory Technology Devices (MTD)
|
|
-#
|
|
# CONFIG_MTD is not set
|
|
-
|
|
-#
|
|
-# Parallel port support
|
|
-#
|
|
# CONFIG_PARPORT is not set
|
|
-
|
|
-#
|
|
-# Plug and Play support
|
|
-#
|
|
-
|
|
-#
|
|
-# Block devices
|
|
-#
|
|
+CONFIG_BLK_DEV=y
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
# CONFIG_BLK_DEV_LOOP is not set
|
|
# CONFIG_BLK_DEV_NBD is not set
|
|
@@ -360,15 +380,19 @@
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
CONFIG_BLK_DEV_RAM_SIZE=8192
|
|
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
-CONFIG_BLK_DEV_INITRD=y
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+CONFIG_ATMEL_SSC=y
|
|
|
|
#
|
|
# SCSI device support
|
|
#
|
|
# CONFIG_RAID_ATTRS is not set
|
|
CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
# CONFIG_SCSI_NETLINK is not set
|
|
CONFIG_SCSI_PROC_FS=y
|
|
|
|
@@ -388,6 +412,8 @@
|
|
CONFIG_SCSI_MULTI_LUN=y
|
|
# CONFIG_SCSI_CONSTANTS is not set
|
|
# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
|
|
#
|
|
# SCSI Transports
|
|
@@ -395,43 +421,72 @@
|
|
# CONFIG_SCSI_SPI_ATTRS is not set
|
|
# CONFIG_SCSI_FC_ATTRS is not set
|
|
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
-# CONFIG_SCSI_SAS_ATTRS is not set
|
|
# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
-
|
|
-#
|
|
-# SCSI low-level drivers
|
|
-#
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
# CONFIG_ISCSI_TCP is not set
|
|
# CONFIG_SCSI_DEBUG is not set
|
|
-
|
|
-#
|
|
-# Multi-device support (RAID and LVM)
|
|
-#
|
|
+# CONFIG_ATA is not set
|
|
# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_MACB=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_SMC91X is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+CONFIG_NETDEV_1000=y
|
|
+CONFIG_NETDEV_10000=y
|
|
|
|
#
|
|
-# Fusion MPT device support
|
|
-#
|
|
-# CONFIG_FUSION is not set
|
|
-
|
|
-#
|
|
-# IEEE 1394 (FireWire) support
|
|
-#
|
|
-
|
|
-#
|
|
-# I2O device support
|
|
+# Wireless LAN
|
|
#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
|
|
#
|
|
-# Network device support
|
|
+# USB Network Adapters
|
|
#
|
|
-# CONFIG_NETDEVICES is not set
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
# CONFIG_NETPOLL is not set
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
-
|
|
-#
|
|
-# ISDN subsystem
|
|
-#
|
|
# CONFIG_ISDN is not set
|
|
|
|
#
|
|
@@ -439,6 +494,7 @@
|
|
#
|
|
CONFIG_INPUT=y
|
|
# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
|
|
#
|
|
# Userland interfaces
|
|
@@ -448,7 +504,6 @@
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
# CONFIG_INPUT_JOYDEV is not set
|
|
-# CONFIG_INPUT_TSDEV is not set
|
|
# CONFIG_INPUT_EVDEV is not set
|
|
# CONFIG_INPUT_EVBUG is not set
|
|
|
|
@@ -458,6 +513,7 @@
|
|
# CONFIG_INPUT_KEYBOARD is not set
|
|
# CONFIG_INPUT_MOUSE is not set
|
|
# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
# CONFIG_INPUT_MISC is not set
|
|
|
|
@@ -492,114 +548,131 @@
|
|
CONFIG_UNIX98_PTYS=y
|
|
CONFIG_LEGACY_PTYS=y
|
|
CONFIG_LEGACY_PTY_COUNT=256
|
|
-
|
|
-#
|
|
-# IPMI
|
|
-#
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
-
|
|
-#
|
|
-# Watchdog Cards
|
|
-#
|
|
-CONFIG_WATCHDOG=y
|
|
-CONFIG_WATCHDOG_NOWAYOUT=y
|
|
-
|
|
-#
|
|
-# Watchdog Device Drivers
|
|
-#
|
|
-# CONFIG_SOFT_WATCHDOG is not set
|
|
-
|
|
-#
|
|
-# USB-based Watchdog Cards
|
|
-#
|
|
-# CONFIG_USBPCWATCHDOG is not set
|
|
-CONFIG_HW_RANDOM=y
|
|
+# CONFIG_HW_RANDOM is not set
|
|
# CONFIG_NVRAM is not set
|
|
-# CONFIG_DTLK is not set
|
|
# CONFIG_R3964 is not set
|
|
-
|
|
-#
|
|
-# Ftape, the floppy tape device driver
|
|
-#
|
|
# CONFIG_RAW_DRIVER is not set
|
|
-
|
|
-#
|
|
-# TPM devices
|
|
-#
|
|
# CONFIG_TCG_TPM is not set
|
|
-
|
|
-#
|
|
-# I2C support
|
|
-#
|
|
-# CONFIG_I2C is not set
|
|
+CONFIG_I2C=y
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
+CONFIG_I2C_CHARDEV=y
|
|
+
|
|
+#
|
|
+# I2C Algorithms
|
|
+#
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
|
+
|
|
+#
|
|
+# I2C Hardware Bus support
|
|
+#
|
|
+CONFIG_I2C_GPIO=y
|
|
+# CONFIG_I2C_OCORES is not set
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
+# CONFIG_I2C_STUB is not set
|
|
+# CONFIG_I2C_TINY_USB is not set
|
|
+# CONFIG_I2C_PCA is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous I2C Chip support
|
|
+#
|
|
+# CONFIG_SENSORS_DS1337 is not set
|
|
+# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
|
+# CONFIG_SENSORS_PCA9539 is not set
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
|
|
|
#
|
|
# SPI support
|
|
#
|
|
# CONFIG_SPI is not set
|
|
# CONFIG_SPI_MASTER is not set
|
|
-
|
|
-#
|
|
-# Dallas's 1-wire bus
|
|
-#
|
|
# CONFIG_W1 is not set
|
|
-
|
|
-#
|
|
-# Hardware Monitoring support
|
|
-#
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
# CONFIG_HWMON is not set
|
|
-# CONFIG_HWMON_VID is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+CONFIG_WATCHDOG_NOWAYOUT=y
|
|
|
|
#
|
|
-# Misc devices
|
|
+# Watchdog Device Drivers
|
|
#
|
|
-# CONFIG_TIFM_CORE is not set
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT91SAM9_WATCHDOG=y
|
|
|
|
#
|
|
-# LED devices
|
|
+# USB-based Watchdog Cards
|
|
#
|
|
-# CONFIG_NEW_LEDS is not set
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
|
|
#
|
|
-# LED drivers
|
|
+# Sonics Silicon Backplane
|
|
#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
|
|
#
|
|
-# LED Triggers
|
|
+# Multifunction device drivers
|
|
#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
|
|
#
|
|
# Multimedia devices
|
|
#
|
|
# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
|
|
#
|
|
-# Digital Video Broadcasting Devices
|
|
+# Graphics support
|
|
#
|
|
-# CONFIG_DVB is not set
|
|
-# CONFIG_USB_DABUSB is not set
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+# CONFIG_FB is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
|
|
#
|
|
-# Graphics support
|
|
+# Display device support
|
|
#
|
|
-# CONFIG_FIRMWARE_EDID is not set
|
|
-# CONFIG_FB is not set
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
|
|
#
|
|
# Console display driver support
|
|
#
|
|
# CONFIG_VGA_CONSOLE is not set
|
|
CONFIG_DUMMY_CONSOLE=y
|
|
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
|
|
#
|
|
# Sound
|
|
#
|
|
# CONFIG_SOUND is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
|
|
#
|
|
-# USB support
|
|
+# USB Input Devices
|
|
+#
|
|
+# CONFIG_USB_HID is not set
|
|
+
|
|
+#
|
|
+# USB HID Boot Protocol drivers
|
|
#
|
|
+# CONFIG_USB_KBD is not set
|
|
+# CONFIG_USB_MOUSE is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
CONFIG_USB_ARCH_HAS_HCD=y
|
|
CONFIG_USB_ARCH_HAS_OHCI=y
|
|
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
@@ -610,7 +683,7 @@
|
|
# Miscellaneous USB options
|
|
#
|
|
CONFIG_USB_DEVICEFS=y
|
|
-# CONFIG_USB_BANDWIDTH is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
# CONFIG_USB_OTG is not set
|
|
|
|
@@ -619,9 +692,11 @@
|
|
#
|
|
# CONFIG_USB_ISP116X_HCD is not set
|
|
CONFIG_USB_OHCI_HCD=y
|
|
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
|
|
#
|
|
# USB Device Class drivers
|
|
@@ -640,6 +715,7 @@
|
|
CONFIG_USB_STORAGE_DEBUG=y
|
|
# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
# CONFIG_USB_STORAGE_DPCM is not set
|
|
# CONFIG_USB_STORAGE_USBAT is not set
|
|
# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
@@ -650,43 +726,10 @@
|
|
# CONFIG_USB_LIBUSUAL is not set
|
|
|
|
#
|
|
-# USB Input Devices
|
|
-#
|
|
-# CONFIG_USB_HID is not set
|
|
-
|
|
-#
|
|
-# USB HID Boot Protocol drivers
|
|
-#
|
|
-# CONFIG_USB_KBD is not set
|
|
-# CONFIG_USB_MOUSE is not set
|
|
-# CONFIG_USB_AIPTEK is not set
|
|
-# CONFIG_USB_WACOM is not set
|
|
-# CONFIG_USB_ACECAD is not set
|
|
-# CONFIG_USB_KBTAB is not set
|
|
-# CONFIG_USB_POWERMATE is not set
|
|
-# CONFIG_USB_TOUCHSCREEN is not set
|
|
-# CONFIG_USB_YEALINK is not set
|
|
-# CONFIG_USB_XPAD is not set
|
|
-# CONFIG_USB_ATI_REMOTE is not set
|
|
-# CONFIG_USB_ATI_REMOTE2 is not set
|
|
-# CONFIG_USB_KEYSPAN_REMOTE is not set
|
|
-# CONFIG_USB_APPLETOUCH is not set
|
|
-
|
|
-#
|
|
# USB Imaging devices
|
|
#
|
|
# CONFIG_USB_MDC800 is not set
|
|
# CONFIG_USB_MICROTEK is not set
|
|
-
|
|
-#
|
|
-# USB Network Adapters
|
|
-#
|
|
-# CONFIG_USB_CATC is not set
|
|
-# CONFIG_USB_KAWETH is not set
|
|
-# CONFIG_USB_PEGASUS is not set
|
|
-# CONFIG_USB_RTL8150 is not set
|
|
-# CONFIG_USB_USBNET_MII is not set
|
|
-# CONFIG_USB_USBNET is not set
|
|
CONFIG_USB_MON=y
|
|
|
|
#
|
|
@@ -708,6 +751,7 @@
|
|
# CONFIG_USB_RIO500 is not set
|
|
# CONFIG_USB_LEGOTOWER is not set
|
|
# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
# CONFIG_USB_LED is not set
|
|
# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
# CONFIG_USB_CYTHERM is not set
|
|
@@ -717,6 +761,7 @@
|
|
# CONFIG_USB_APPLEDISPLAY is not set
|
|
# CONFIG_USB_LD is not set
|
|
# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
# CONFIG_USB_TEST is not set
|
|
|
|
#
|
|
@@ -727,13 +772,19 @@
|
|
# USB Gadget Support
|
|
#
|
|
CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG is not set
|
|
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
# CONFIG_USB_GADGET_NET2280 is not set
|
|
# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
# CONFIG_USB_GADGET_GOKU is not set
|
|
# CONFIG_USB_GADGET_LH7A40X is not set
|
|
# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
CONFIG_USB_GADGET_AT91=y
|
|
CONFIG_USB_AT91=y
|
|
# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
@@ -745,17 +796,56 @@
|
|
# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
CONFIG_USB_G_SERIAL=m
|
|
# CONFIG_USB_MIDI_GADGET is not set
|
|
+# CONFIG_MMC is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
|
|
#
|
|
-# MMC/SD Card support
|
|
+# RTC interfaces
|
|
#
|
|
-# CONFIG_MMC is not set
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
|
|
#
|
|
-# Real Time Clock
|
|
+# I2C RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
+# CONFIG_RTC_DRV_DS1374 is not set
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
|
+
|
|
+#
|
|
+# SPI RTC drivers
|
|
#
|
|
-CONFIG_RTC_LIB=y
|
|
-# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# Platform RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_CMOS is not set
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
+
|
|
+#
|
|
+# on-CPU RTC drivers
|
|
+#
|
|
+CONFIG_RTC_DRV_AT91SAM9=y
|
|
|
|
#
|
|
# File systems
|
|
@@ -806,7 +896,6 @@
|
|
CONFIG_TMPFS=y
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
-CONFIG_RAMFS=y
|
|
# CONFIG_CONFIGFS_FS is not set
|
|
|
|
#
|
|
@@ -825,10 +914,7 @@
|
|
# CONFIG_QNX4FS_FS is not set
|
|
# CONFIG_SYSV_FS is not set
|
|
# CONFIG_UFS_FS is not set
|
|
-
|
|
-#
|
|
-# Network File Systems
|
|
-#
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
# CONFIG_NFS_FS is not set
|
|
# CONFIG_NFSD is not set
|
|
# CONFIG_SMB_FS is not set
|
|
@@ -836,17 +922,12 @@
|
|
# CONFIG_NCP_FS is not set
|
|
# CONFIG_CODA_FS is not set
|
|
# CONFIG_AFS_FS is not set
|
|
-# CONFIG_9P_FS is not set
|
|
|
|
#
|
|
# Partition Types
|
|
#
|
|
# CONFIG_PARTITION_ADVANCED is not set
|
|
CONFIG_MSDOS_PARTITION=y
|
|
-
|
|
-#
|
|
-# Native Language Support
|
|
-#
|
|
CONFIG_NLS=y
|
|
CONFIG_NLS_DEFAULT="iso8859-1"
|
|
CONFIG_NLS_CODEPAGE_437=y
|
|
@@ -887,41 +968,49 @@
|
|
# CONFIG_NLS_KOI8_R is not set
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
# CONFIG_NLS_UTF8 is not set
|
|
-
|
|
-#
|
|
-# Profiling support
|
|
-#
|
|
+# CONFIG_DLM is not set
|
|
+CONFIG_INSTRUMENTATION=y
|
|
# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
#
|
|
# Kernel hacking
|
|
#
|
|
# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
CONFIG_ENABLE_MUST_CHECK=y
|
|
# CONFIG_MAGIC_SYSRQ is not set
|
|
# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
CONFIG_DEBUG_KERNEL=y
|
|
-CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
# CONFIG_SCHEDSTATS is not set
|
|
+# CONFIG_TIMER_STATS is not set
|
|
# CONFIG_DEBUG_SLAB is not set
|
|
# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
# CONFIG_RT_MUTEX_TESTER is not set
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
|
# CONFIG_DEBUG_MUTEXES is not set
|
|
-# CONFIG_DEBUG_RWSEMS is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
# CONFIG_DEBUG_KOBJECT is not set
|
|
CONFIG_DEBUG_BUGVERBOSE=y
|
|
# CONFIG_DEBUG_INFO is not set
|
|
-# CONFIG_DEBUG_FS is not set
|
|
# CONFIG_DEBUG_VM is not set
|
|
# CONFIG_DEBUG_LIST is not set
|
|
+# CONFIG_DEBUG_SG is not set
|
|
CONFIG_FRAME_POINTER=y
|
|
CONFIG_FORCED_INLINING=y
|
|
-# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
CONFIG_DEBUG_USER=y
|
|
# CONFIG_DEBUG_ERRORS is not set
|
|
CONFIG_DEBUG_LL=y
|
|
@@ -932,18 +1021,21 @@
|
|
#
|
|
# CONFIG_KEYS is not set
|
|
# CONFIG_SECURITY is not set
|
|
-
|
|
-#
|
|
-# Cryptographic options
|
|
-#
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
# CONFIG_CRYPTO is not set
|
|
|
|
#
|
|
# Library routines
|
|
#
|
|
+CONFIG_BITREVERSE=y
|
|
# CONFIG_CRC_CCITT is not set
|
|
# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
# CONFIG_LIBCRC32C is not set
|
|
CONFIG_ZLIB_INFLATE=y
|
|
CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9261ek_defconfig linux-2.6/arch/arm/configs/at91sam9261ek_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/at91sam9261ek_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/at91sam9261ek_defconfig 2008-01-08 22:21:57.000000000 +0200
|
|
@@ -1,43 +1,56 @@
|
|
#
|
|
# Automatically generated make config: don't edit
|
|
-# Linux kernel version: 2.6.19-rc6
|
|
-# Fri Nov 17 18:00:38 2006
|
|
+# Linux kernel version: 2.6.24-rc7
|
|
+# Tue Jan 8 22:21:49 2008
|
|
#
|
|
CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
# CONFIG_GENERIC_TIME is not set
|
|
+# CONFIG_GENERIC_CLOCKEVENTS is not set
|
|
CONFIG_MMU=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
CONFIG_HARDIRQS_SW_RESEND=y
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
CONFIG_VECTORS_BASE=0xffff0000
|
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
#
|
|
-# Code maturity level options
|
|
+# General setup
|
|
#
|
|
CONFIG_EXPERIMENTAL=y
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
-
|
|
-#
|
|
-# General setup
|
|
-#
|
|
CONFIG_LOCALVERSION=""
|
|
# CONFIG_LOCALVERSION_AUTO is not set
|
|
# CONFIG_SWAP is not set
|
|
CONFIG_SYSVIPC=y
|
|
-# CONFIG_IPC_NS is not set
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
# CONFIG_POSIX_MQUEUE is not set
|
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
|
# CONFIG_TASKSTATS is not set
|
|
-# CONFIG_UTS_NS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
# CONFIG_AUDIT is not set
|
|
# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
# CONFIG_RELAY is not set
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
CONFIG_INITRAMFS_SOURCE=""
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
CONFIG_SYSCTL=y
|
|
@@ -53,30 +66,30 @@
|
|
CONFIG_ELF_CORE=y
|
|
CONFIG_BASE_FULL=y
|
|
CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
CONFIG_SHMEM=y
|
|
-CONFIG_SLAB=y
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
CONFIG_RT_MUTEXES=y
|
|
# CONFIG_TINY_SHMEM is not set
|
|
CONFIG_BASE_SMALL=0
|
|
-# CONFIG_SLOB is not set
|
|
-
|
|
-#
|
|
-# Loadable module support
|
|
-#
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
# CONFIG_MODVERSIONS is not set
|
|
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
CONFIG_KMOD=y
|
|
-
|
|
-#
|
|
-# Block layer
|
|
-#
|
|
CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
|
|
#
|
|
# IO Schedulers
|
|
@@ -108,12 +121,16 @@
|
|
# CONFIG_ARCH_NETX is not set
|
|
# CONFIG_ARCH_H720X is not set
|
|
# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
# CONFIG_ARCH_IOP32X is not set
|
|
# CONFIG_ARCH_IOP33X is not set
|
|
-# CONFIG_ARCH_IXP4XX is not set
|
|
-# CONFIG_ARCH_IXP2000 is not set
|
|
# CONFIG_ARCH_IXP23XX is not set
|
|
+# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_KS8695 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_MXC is not set
|
|
# CONFIG_ARCH_PNX4008 is not set
|
|
# CONFIG_ARCH_PXA is not set
|
|
# CONFIG_ARCH_RPC is not set
|
|
@@ -121,14 +138,27 @@
|
|
# CONFIG_ARCH_S3C2410 is not set
|
|
# CONFIG_ARCH_SHARK is not set
|
|
# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_DAVINCI is not set
|
|
# CONFIG_ARCH_OMAP is not set
|
|
|
|
#
|
|
+# Boot options
|
|
+#
|
|
+
|
|
+#
|
|
+# Power management
|
|
+#
|
|
+
|
|
+#
|
|
# Atmel AT91 System-on-Chip
|
|
#
|
|
# CONFIG_ARCH_AT91RM9200 is not set
|
|
# CONFIG_ARCH_AT91SAM9260 is not set
|
|
CONFIG_ARCH_AT91SAM9261=y
|
|
+# CONFIG_ARCH_AT91SAM9263 is not set
|
|
+# CONFIG_ARCH_AT91SAM9RL is not set
|
|
+# CONFIG_ARCH_AT91X40 is not set
|
|
+CONFIG_AT91_PMC_UNIT=y
|
|
|
|
#
|
|
# AT91SAM9261 Board Type
|
|
@@ -138,12 +168,15 @@
|
|
#
|
|
# AT91 Board Options
|
|
#
|
|
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
|
|
# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
|
|
|
|
#
|
|
# AT91 Feature Selections
|
|
#
|
|
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
|
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
+CONFIG_AT91_TIMER_HZ=100
|
|
|
|
#
|
|
# Processor Type
|
|
@@ -166,19 +199,19 @@
|
|
# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
|
|
#
|
|
# Bus support
|
|
#
|
|
-
|
|
-#
|
|
-# PCCARD (PCMCIA/CardBus) support
|
|
-#
|
|
+# CONFIG_PCI_SYSCALL is not set
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
# CONFIG_PCCARD is not set
|
|
|
|
#
|
|
# Kernel Features
|
|
#
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
# CONFIG_PREEMPT is not set
|
|
# CONFIG_NO_IDLE_HZ is not set
|
|
CONFIG_HZ=100
|
|
@@ -191,8 +224,12 @@
|
|
CONFIG_FLATMEM=y
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
+CONFIG_BOUNCE=y
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
# CONFIG_LEDS is not set
|
|
CONFIG_ALIGNMENT_TRAP=y
|
|
|
|
@@ -203,6 +240,7 @@
|
|
CONFIG_ZBOOT_ROM_BSS=0x0
|
|
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
|
|
# CONFIG_XIP_KERNEL is not set
|
|
+# CONFIG_KEXEC is not set
|
|
|
|
#
|
|
# Floating point emulation
|
|
@@ -228,7 +266,7 @@
|
|
# Power management options
|
|
#
|
|
# CONFIG_PM is not set
|
|
-# CONFIG_APM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
|
|
#
|
|
# Networking
|
|
@@ -238,13 +276,13 @@
|
|
#
|
|
# Networking options
|
|
#
|
|
-# CONFIG_NETDEBUG is not set
|
|
CONFIG_PACKET=y
|
|
# CONFIG_PACKET_MMAP is not set
|
|
CONFIG_UNIX=y
|
|
CONFIG_XFRM=y
|
|
# CONFIG_XFRM_USER is not set
|
|
# CONFIG_XFRM_SUB_POLICY is not set
|
|
+# CONFIG_XFRM_MIGRATE is not set
|
|
# CONFIG_NET_KEY is not set
|
|
CONFIG_INET=y
|
|
# CONFIG_IP_MULTICAST is not set
|
|
@@ -266,30 +304,20 @@
|
|
CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
|
CONFIG_INET_XFRM_MODE_TUNNEL=y
|
|
CONFIG_INET_XFRM_MODE_BEET=y
|
|
+# CONFIG_INET_LRO is not set
|
|
CONFIG_INET_DIAG=y
|
|
CONFIG_INET_TCP_DIAG=y
|
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
|
CONFIG_TCP_CONG_CUBIC=y
|
|
CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
# CONFIG_IPV6 is not set
|
|
# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
# CONFIG_INET6_TUNNEL is not set
|
|
# CONFIG_NETWORK_SECMARK is not set
|
|
# CONFIG_NETFILTER is not set
|
|
-
|
|
-#
|
|
-# DCCP Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_IP_DCCP is not set
|
|
-
|
|
-#
|
|
-# SCTP Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_IP_SCTP is not set
|
|
-
|
|
-#
|
|
-# TIPC Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_TIPC is not set
|
|
# CONFIG_ATM is not set
|
|
# CONFIG_BRIDGE is not set
|
|
@@ -302,10 +330,6 @@
|
|
# CONFIG_LAPB is not set
|
|
# CONFIG_ECONET is not set
|
|
# CONFIG_WAN_ROUTER is not set
|
|
-
|
|
-#
|
|
-# QoS and/or fair queueing
|
|
-#
|
|
# CONFIG_NET_SCHED is not set
|
|
|
|
#
|
|
@@ -315,7 +339,17 @@
|
|
# CONFIG_HAMRADIO is not set
|
|
# CONFIG_IRDA is not set
|
|
# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
|
|
#
|
|
# Device Drivers
|
|
@@ -324,20 +358,14 @@
|
|
#
|
|
# Generic Driver Options
|
|
#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
CONFIG_STANDALONE=y
|
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
# CONFIG_FW_LOADER is not set
|
|
# CONFIG_DEBUG_DRIVER is not set
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
# CONFIG_SYS_HYPERVISOR is not set
|
|
-
|
|
-#
|
|
-# Connector - unified userspace <-> kernelspace linker
|
|
-#
|
|
# CONFIG_CONNECTOR is not set
|
|
-
|
|
-#
|
|
-# Memory Technology Devices (MTD)
|
|
-#
|
|
CONFIG_MTD=y
|
|
# CONFIG_MTD_DEBUG is not set
|
|
# CONFIG_MTD_CONCAT is not set
|
|
@@ -350,12 +378,14 @@
|
|
# User Modules And Translation Layers
|
|
#
|
|
# CONFIG_MTD_CHAR is not set
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
CONFIG_MTD_BLOCK=y
|
|
# CONFIG_FTL is not set
|
|
# CONFIG_NFTL is not set
|
|
# CONFIG_INFTL is not set
|
|
# CONFIG_RFD_FTL is not set
|
|
# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
|
|
#
|
|
# RAM/ROM/Flash chip drivers
|
|
@@ -375,7 +405,6 @@
|
|
# CONFIG_MTD_RAM is not set
|
|
# CONFIG_MTD_ROM is not set
|
|
# CONFIG_MTD_ABSENT is not set
|
|
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
|
|
|
#
|
|
# Mapping drivers for chip access
|
|
@@ -386,6 +415,8 @@
|
|
#
|
|
# Self-contained MTD device drivers
|
|
#
|
|
+# CONFIG_MTD_DATAFLASH is not set
|
|
+# CONFIG_MTD_M25P80 is not set
|
|
# CONFIG_MTD_SLRAM is not set
|
|
# CONFIG_MTD_PHRAM is not set
|
|
# CONFIG_MTD_MTDRAM is not set
|
|
@@ -397,35 +428,24 @@
|
|
# CONFIG_MTD_DOC2000 is not set
|
|
# CONFIG_MTD_DOC2001 is not set
|
|
# CONFIG_MTD_DOC2001PLUS is not set
|
|
-
|
|
-#
|
|
-# NAND Flash Device Drivers
|
|
-#
|
|
CONFIG_MTD_NAND=y
|
|
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
CONFIG_MTD_NAND_IDS=y
|
|
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
CONFIG_MTD_NAND_AT91=y
|
|
# CONFIG_MTD_NAND_NANDSIM is not set
|
|
-
|
|
-#
|
|
-# OneNAND Flash Device Drivers
|
|
-#
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
# CONFIG_MTD_ONENAND is not set
|
|
|
|
#
|
|
-# Parallel port support
|
|
+# UBI - Unsorted block images
|
|
#
|
|
+# CONFIG_MTD_UBI is not set
|
|
# CONFIG_PARPORT is not set
|
|
-
|
|
-#
|
|
-# Plug and Play support
|
|
-#
|
|
-
|
|
-#
|
|
-# Block devices
|
|
-#
|
|
+CONFIG_BLK_DEV=y
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
# CONFIG_BLK_DEV_LOOP is not set
|
|
# CONFIG_BLK_DEV_NBD is not set
|
|
@@ -434,15 +454,19 @@
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
CONFIG_BLK_DEV_RAM_SIZE=8192
|
|
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
-CONFIG_BLK_DEV_INITRD=y
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+CONFIG_ATMEL_SSC=y
|
|
|
|
#
|
|
# SCSI device support
|
|
#
|
|
# CONFIG_RAID_ATTRS is not set
|
|
CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
# CONFIG_SCSI_NETLINK is not set
|
|
CONFIG_SCSI_PROC_FS=y
|
|
|
|
@@ -462,6 +486,8 @@
|
|
CONFIG_SCSI_MULTI_LUN=y
|
|
# CONFIG_SCSI_CONSTANTS is not set
|
|
# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
|
|
#
|
|
# SCSI Transports
|
|
@@ -469,75 +495,49 @@
|
|
# CONFIG_SCSI_SPI_ATTRS is not set
|
|
# CONFIG_SCSI_FC_ATTRS is not set
|
|
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
-# CONFIG_SCSI_SAS_ATTRS is not set
|
|
# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
-
|
|
-#
|
|
-# SCSI low-level drivers
|
|
-#
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
# CONFIG_ISCSI_TCP is not set
|
|
# CONFIG_SCSI_DEBUG is not set
|
|
-
|
|
-#
|
|
-# Multi-device support (RAID and LVM)
|
|
-#
|
|
+# CONFIG_ATA is not set
|
|
# CONFIG_MD is not set
|
|
-
|
|
-#
|
|
-# Fusion MPT device support
|
|
-#
|
|
-# CONFIG_FUSION is not set
|
|
-
|
|
-#
|
|
-# IEEE 1394 (FireWire) support
|
|
-#
|
|
-
|
|
-#
|
|
-# I2O device support
|
|
-#
|
|
-
|
|
-#
|
|
-# Network device support
|
|
-#
|
|
CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
# CONFIG_DUMMY is not set
|
|
# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
# CONFIG_EQUALIZER is not set
|
|
# CONFIG_TUN is not set
|
|
-
|
|
-#
|
|
-# PHY device support
|
|
-#
|
|
+# CONFIG_VETH is not set
|
|
# CONFIG_PHYLIB is not set
|
|
-
|
|
-#
|
|
-# Ethernet (10 or 100Mbit)
|
|
-#
|
|
CONFIG_NET_ETHERNET=y
|
|
CONFIG_MII=y
|
|
+# CONFIG_AX88796 is not set
|
|
# CONFIG_SMC91X is not set
|
|
CONFIG_DM9000=y
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
|
|
#
|
|
-# Ethernet (1000 Mbit)
|
|
-#
|
|
-
|
|
-#
|
|
-# Ethernet (10000 Mbit)
|
|
-#
|
|
-
|
|
-#
|
|
-# Token Ring devices
|
|
+# Wireless LAN
|
|
#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
|
|
#
|
|
-# Wireless LAN (non-hamradio)
|
|
-#
|
|
-# CONFIG_NET_RADIO is not set
|
|
-
|
|
-#
|
|
-# Wan interfaces
|
|
+# USB Network Adapters
|
|
#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
# CONFIG_WAN is not set
|
|
# CONFIG_PPP is not set
|
|
# CONFIG_SLIP is not set
|
|
@@ -545,10 +545,6 @@
|
|
# CONFIG_NETCONSOLE is not set
|
|
# CONFIG_NETPOLL is not set
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
-
|
|
-#
|
|
-# ISDN subsystem
|
|
-#
|
|
# CONFIG_ISDN is not set
|
|
|
|
#
|
|
@@ -556,6 +552,7 @@
|
|
#
|
|
CONFIG_INPUT=y
|
|
# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
|
|
#
|
|
# Userland interfaces
|
|
@@ -565,23 +562,43 @@
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
# CONFIG_INPUT_JOYDEV is not set
|
|
-# CONFIG_INPUT_TSDEV is not set
|
|
# CONFIG_INPUT_EVDEV is not set
|
|
# CONFIG_INPUT_EVBUG is not set
|
|
|
|
#
|
|
# Input Device Drivers
|
|
#
|
|
-# CONFIG_INPUT_KEYBOARD is not set
|
|
+CONFIG_INPUT_KEYBOARD=y
|
|
+# CONFIG_KEYBOARD_ATKBD is not set
|
|
+# CONFIG_KEYBOARD_SUNKBD is not set
|
|
+# CONFIG_KEYBOARD_LKKBD is not set
|
|
+# CONFIG_KEYBOARD_XTKBD is not set
|
|
+# CONFIG_KEYBOARD_NEWTON is not set
|
|
+# CONFIG_KEYBOARD_STOWAWAY is not set
|
|
+CONFIG_KEYBOARD_GPIO=y
|
|
# CONFIG_INPUT_MOUSE is not set
|
|
# CONFIG_INPUT_JOYSTICK is not set
|
|
-# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+CONFIG_INPUT_TOUCHSCREEN=y
|
|
+CONFIG_TOUCHSCREEN_ADS7846=y
|
|
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
|
|
+# CONFIG_TOUCHSCREEN_GUNZE is not set
|
|
+# CONFIG_TOUCHSCREEN_ELO is not set
|
|
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
|
|
+# CONFIG_TOUCHSCREEN_MK712 is not set
|
|
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
|
|
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
|
|
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
|
|
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
|
|
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
|
|
# CONFIG_INPUT_MISC is not set
|
|
|
|
#
|
|
# Hardware I/O ports
|
|
#
|
|
-# CONFIG_SERIO is not set
|
|
+CONFIG_SERIO=y
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+# CONFIG_SERIO_RAW is not set
|
|
# CONFIG_GAMEPORT is not set
|
|
|
|
#
|
|
@@ -609,75 +626,47 @@
|
|
CONFIG_UNIX98_PTYS=y
|
|
CONFIG_LEGACY_PTYS=y
|
|
CONFIG_LEGACY_PTY_COUNT=256
|
|
-
|
|
-#
|
|
-# IPMI
|
|
-#
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
-
|
|
-#
|
|
-# Watchdog Cards
|
|
-#
|
|
-CONFIG_WATCHDOG=y
|
|
-CONFIG_WATCHDOG_NOWAYOUT=y
|
|
-
|
|
-#
|
|
-# Watchdog Device Drivers
|
|
-#
|
|
-# CONFIG_SOFT_WATCHDOG is not set
|
|
-
|
|
-#
|
|
-# USB-based Watchdog Cards
|
|
-#
|
|
-# CONFIG_USBPCWATCHDOG is not set
|
|
CONFIG_HW_RANDOM=y
|
|
# CONFIG_NVRAM is not set
|
|
-# CONFIG_DTLK is not set
|
|
# CONFIG_R3964 is not set
|
|
-
|
|
-#
|
|
-# Ftape, the floppy tape device driver
|
|
-#
|
|
# CONFIG_RAW_DRIVER is not set
|
|
-
|
|
-#
|
|
-# TPM devices
|
|
-#
|
|
# CONFIG_TCG_TPM is not set
|
|
-
|
|
-#
|
|
-# I2C support
|
|
-#
|
|
CONFIG_I2C=y
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
CONFIG_I2C_CHARDEV=y
|
|
|
|
#
|
|
# I2C Algorithms
|
|
#
|
|
-# CONFIG_I2C_ALGOBIT is not set
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
# CONFIG_I2C_ALGOPCF is not set
|
|
# CONFIG_I2C_ALGOPCA is not set
|
|
|
|
#
|
|
# I2C Hardware Bus support
|
|
#
|
|
-CONFIG_I2C_AT91=y
|
|
+CONFIG_I2C_GPIO=y
|
|
# CONFIG_I2C_OCORES is not set
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
# CONFIG_I2C_STUB is not set
|
|
+# CONFIG_I2C_TINY_USB is not set
|
|
# CONFIG_I2C_PCA is not set
|
|
-# CONFIG_I2C_PCA_ISA is not set
|
|
|
|
#
|
|
# Miscellaneous I2C Chip support
|
|
#
|
|
# CONFIG_SENSORS_DS1337 is not set
|
|
# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
# CONFIG_SENSORS_EEPROM is not set
|
|
# CONFIG_SENSORS_PCF8574 is not set
|
|
# CONFIG_SENSORS_PCA9539 is not set
|
|
# CONFIG_SENSORS_PCF8591 is not set
|
|
# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
# CONFIG_I2C_DEBUG_CORE is not set
|
|
# CONFIG_I2C_DEBUG_ALGO is not set
|
|
# CONFIG_I2C_DEBUG_BUS is not set
|
|
@@ -686,70 +675,125 @@
|
|
#
|
|
# SPI support
|
|
#
|
|
-# CONFIG_SPI is not set
|
|
-# CONFIG_SPI_MASTER is not set
|
|
+CONFIG_SPI=y
|
|
+# CONFIG_SPI_DEBUG is not set
|
|
+CONFIG_SPI_MASTER=y
|
|
|
|
#
|
|
-# Dallas's 1-wire bus
|
|
+# SPI Master Controller Drivers
|
|
#
|
|
-# CONFIG_W1 is not set
|
|
+CONFIG_SPI_ATMEL=y
|
|
+# CONFIG_SPI_BITBANG is not set
|
|
|
|
#
|
|
-# Hardware Monitoring support
|
|
+# SPI Protocol Masters
|
|
#
|
|
+# CONFIG_SPI_AT25 is not set
|
|
+# CONFIG_SPI_SPIDEV is not set
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
# CONFIG_HWMON is not set
|
|
-# CONFIG_HWMON_VID is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+CONFIG_WATCHDOG_NOWAYOUT=y
|
|
|
|
#
|
|
-# Misc devices
|
|
+# Watchdog Device Drivers
|
|
#
|
|
-# CONFIG_TIFM_CORE is not set
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT91SAM9_WATCHDOG=y
|
|
|
|
#
|
|
-# LED devices
|
|
+# USB-based Watchdog Cards
|
|
#
|
|
-# CONFIG_NEW_LEDS is not set
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
|
|
#
|
|
-# LED drivers
|
|
+# Sonics Silicon Backplane
|
|
#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
|
|
#
|
|
-# LED Triggers
|
|
+# Multifunction device drivers
|
|
#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
|
|
#
|
|
# Multimedia devices
|
|
#
|
|
# CONFIG_VIDEO_DEV is not set
|
|
-
|
|
-#
|
|
-# Digital Video Broadcasting Devices
|
|
-#
|
|
-# CONFIG_DVB is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+CONFIG_DAB=y
|
|
# CONFIG_USB_DABUSB is not set
|
|
|
|
#
|
|
# Graphics support
|
|
#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+CONFIG_FB=y
|
|
# CONFIG_FIRMWARE_EDID is not set
|
|
-# CONFIG_FB is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+# CONFIG_FB_MODE_HELPERS is not set
|
|
+# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+# CONFIG_FB_S1D15605 is not set
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+CONFIG_FB_ATMEL=y
|
|
+# CONFIG_FB_INTSRAM is not set
|
|
+# CONFIG_FB_ATMEL_STN is not set
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
|
|
#
|
|
# Console display driver support
|
|
#
|
|
# CONFIG_VGA_CONSOLE is not set
|
|
CONFIG_DUMMY_CONSOLE=y
|
|
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
|
|
+# CONFIG_LOGO is not set
|
|
|
|
#
|
|
# Sound
|
|
#
|
|
# CONFIG_SOUND is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
|
|
#
|
|
-# USB support
|
|
+# USB Input Devices
|
|
#
|
|
+# CONFIG_USB_HID is not set
|
|
+
|
|
+#
|
|
+# USB HID Boot Protocol drivers
|
|
+#
|
|
+# CONFIG_USB_KBD is not set
|
|
+# CONFIG_USB_MOUSE is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
CONFIG_USB_ARCH_HAS_HCD=y
|
|
CONFIG_USB_ARCH_HAS_OHCI=y
|
|
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
@@ -760,7 +804,7 @@
|
|
# Miscellaneous USB options
|
|
#
|
|
CONFIG_USB_DEVICEFS=y
|
|
-# CONFIG_USB_BANDWIDTH is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
# CONFIG_USB_OTG is not set
|
|
|
|
@@ -769,9 +813,11 @@
|
|
#
|
|
# CONFIG_USB_ISP116X_HCD is not set
|
|
CONFIG_USB_OHCI_HCD=y
|
|
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
|
|
#
|
|
# USB Device Class drivers
|
|
@@ -790,6 +836,7 @@
|
|
CONFIG_USB_STORAGE_DEBUG=y
|
|
# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
# CONFIG_USB_STORAGE_DPCM is not set
|
|
# CONFIG_USB_STORAGE_USBAT is not set
|
|
# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
@@ -800,43 +847,10 @@
|
|
# CONFIG_USB_LIBUSUAL is not set
|
|
|
|
#
|
|
-# USB Input Devices
|
|
-#
|
|
-# CONFIG_USB_HID is not set
|
|
-
|
|
-#
|
|
-# USB HID Boot Protocol drivers
|
|
-#
|
|
-# CONFIG_USB_KBD is not set
|
|
-# CONFIG_USB_MOUSE is not set
|
|
-# CONFIG_USB_AIPTEK is not set
|
|
-# CONFIG_USB_WACOM is not set
|
|
-# CONFIG_USB_ACECAD is not set
|
|
-# CONFIG_USB_KBTAB is not set
|
|
-# CONFIG_USB_POWERMATE is not set
|
|
-# CONFIG_USB_TOUCHSCREEN is not set
|
|
-# CONFIG_USB_YEALINK is not set
|
|
-# CONFIG_USB_XPAD is not set
|
|
-# CONFIG_USB_ATI_REMOTE is not set
|
|
-# CONFIG_USB_ATI_REMOTE2 is not set
|
|
-# CONFIG_USB_KEYSPAN_REMOTE is not set
|
|
-# CONFIG_USB_APPLETOUCH is not set
|
|
-
|
|
-#
|
|
# USB Imaging devices
|
|
#
|
|
# CONFIG_USB_MDC800 is not set
|
|
# CONFIG_USB_MICROTEK is not set
|
|
-
|
|
-#
|
|
-# USB Network Adapters
|
|
-#
|
|
-# CONFIG_USB_CATC is not set
|
|
-# CONFIG_USB_KAWETH is not set
|
|
-# CONFIG_USB_PEGASUS is not set
|
|
-# CONFIG_USB_RTL8150 is not set
|
|
-# CONFIG_USB_USBNET_MII is not set
|
|
-# CONFIG_USB_USBNET is not set
|
|
CONFIG_USB_MON=y
|
|
|
|
#
|
|
@@ -858,6 +872,7 @@
|
|
# CONFIG_USB_RIO500 is not set
|
|
# CONFIG_USB_LEGOTOWER is not set
|
|
# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
# CONFIG_USB_LED is not set
|
|
# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
# CONFIG_USB_CYTHERM is not set
|
|
@@ -867,6 +882,7 @@
|
|
# CONFIG_USB_APPLEDISPLAY is not set
|
|
# CONFIG_USB_LD is not set
|
|
# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
# CONFIG_USB_TEST is not set
|
|
|
|
#
|
|
@@ -877,13 +893,19 @@
|
|
# USB Gadget Support
|
|
#
|
|
CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG is not set
|
|
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
# CONFIG_USB_GADGET_NET2280 is not set
|
|
# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
# CONFIG_USB_GADGET_GOKU is not set
|
|
# CONFIG_USB_GADGET_LH7A40X is not set
|
|
# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
CONFIG_USB_GADGET_AT91=y
|
|
CONFIG_USB_AT91=y
|
|
# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
@@ -895,21 +917,73 @@
|
|
# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
CONFIG_USB_G_SERIAL=m
|
|
# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
|
|
#
|
|
-# MMC/SD Card support
|
|
+# MMC/SD Card Drivers
|
|
#
|
|
-CONFIG_MMC=y
|
|
-# CONFIG_MMC_DEBUG is not set
|
|
CONFIG_MMC_BLOCK=y
|
|
-CONFIG_MMC_AT91=m
|
|
-# CONFIG_MMC_TIFM_SD is not set
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
|
|
#
|
|
-# Real Time Clock
|
|
+# MMC/SD Host Controller Drivers
|
|
#
|
|
+CONFIG_MMC_AT91=y
|
|
+# CONFIG_MMC_SPI is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
CONFIG_RTC_LIB=y
|
|
-# CONFIG_RTC_CLASS is not set
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
+
|
|
+#
|
|
+# RTC interfaces
|
|
+#
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
+
|
|
+#
|
|
+# I2C RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
+# CONFIG_RTC_DRV_DS1374 is not set
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
|
+
|
|
+#
|
|
+# SPI RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
|
+
|
|
+#
|
|
+# Platform RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_CMOS is not set
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
+
|
|
+#
|
|
+# on-CPU RTC drivers
|
|
+#
|
|
+CONFIG_RTC_DRV_AT91SAM9=y
|
|
|
|
#
|
|
# File systems
|
|
@@ -960,7 +1034,6 @@
|
|
CONFIG_TMPFS=y
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
-CONFIG_RAMFS=y
|
|
# CONFIG_CONFIGFS_FS is not set
|
|
|
|
#
|
|
@@ -973,7 +1046,6 @@
|
|
# CONFIG_BEFS_FS is not set
|
|
# CONFIG_BFS_FS is not set
|
|
# CONFIG_EFS_FS is not set
|
|
-# CONFIG_JFFS_FS is not set
|
|
# CONFIG_JFFS2_FS is not set
|
|
CONFIG_CRAMFS=y
|
|
# CONFIG_VXFS_FS is not set
|
|
@@ -981,10 +1053,7 @@
|
|
# CONFIG_QNX4FS_FS is not set
|
|
# CONFIG_SYSV_FS is not set
|
|
# CONFIG_UFS_FS is not set
|
|
-
|
|
-#
|
|
-# Network File Systems
|
|
-#
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
# CONFIG_NFS_FS is not set
|
|
# CONFIG_NFSD is not set
|
|
# CONFIG_SMB_FS is not set
|
|
@@ -992,17 +1061,12 @@
|
|
# CONFIG_NCP_FS is not set
|
|
# CONFIG_CODA_FS is not set
|
|
# CONFIG_AFS_FS is not set
|
|
-# CONFIG_9P_FS is not set
|
|
|
|
#
|
|
# Partition Types
|
|
#
|
|
# CONFIG_PARTITION_ADVANCED is not set
|
|
CONFIG_MSDOS_PARTITION=y
|
|
-
|
|
-#
|
|
-# Native Language Support
|
|
-#
|
|
CONFIG_NLS=y
|
|
CONFIG_NLS_DEFAULT="iso8859-1"
|
|
CONFIG_NLS_CODEPAGE_437=y
|
|
@@ -1043,41 +1107,49 @@
|
|
# CONFIG_NLS_KOI8_R is not set
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
# CONFIG_NLS_UTF8 is not set
|
|
-
|
|
-#
|
|
-# Profiling support
|
|
-#
|
|
+# CONFIG_DLM is not set
|
|
+CONFIG_INSTRUMENTATION=y
|
|
# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
#
|
|
# Kernel hacking
|
|
#
|
|
# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
CONFIG_ENABLE_MUST_CHECK=y
|
|
# CONFIG_MAGIC_SYSRQ is not set
|
|
# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
CONFIG_DEBUG_KERNEL=y
|
|
-CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
# CONFIG_SCHEDSTATS is not set
|
|
+# CONFIG_TIMER_STATS is not set
|
|
# CONFIG_DEBUG_SLAB is not set
|
|
# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
# CONFIG_RT_MUTEX_TESTER is not set
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
|
# CONFIG_DEBUG_MUTEXES is not set
|
|
-# CONFIG_DEBUG_RWSEMS is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
# CONFIG_DEBUG_KOBJECT is not set
|
|
CONFIG_DEBUG_BUGVERBOSE=y
|
|
# CONFIG_DEBUG_INFO is not set
|
|
-# CONFIG_DEBUG_FS is not set
|
|
# CONFIG_DEBUG_VM is not set
|
|
# CONFIG_DEBUG_LIST is not set
|
|
+# CONFIG_DEBUG_SG is not set
|
|
CONFIG_FRAME_POINTER=y
|
|
CONFIG_FORCED_INLINING=y
|
|
-# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
CONFIG_DEBUG_USER=y
|
|
# CONFIG_DEBUG_ERRORS is not set
|
|
CONFIG_DEBUG_LL=y
|
|
@@ -1088,18 +1160,21 @@
|
|
#
|
|
# CONFIG_KEYS is not set
|
|
# CONFIG_SECURITY is not set
|
|
-
|
|
-#
|
|
-# Cryptographic options
|
|
-#
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
# CONFIG_CRYPTO is not set
|
|
|
|
#
|
|
# Library routines
|
|
#
|
|
+CONFIG_BITREVERSE=y
|
|
# CONFIG_CRC_CCITT is not set
|
|
# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
# CONFIG_LIBCRC32C is not set
|
|
CONFIG_ZLIB_INFLATE=y
|
|
CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9263ek_defconfig linux-2.6/arch/arm/configs/at91sam9263ek_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/at91sam9263ek_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/at91sam9263ek_defconfig 2008-01-08 22:12:41.000000000 +0200
|
|
@@ -1,12 +1,18 @@
|
|
#
|
|
# Automatically generated make config: don't edit
|
|
-# Linux kernel version: 2.6.20-rc1
|
|
-# Mon Jan 8 16:06:54 2007
|
|
+# Linux kernel version: 2.6.24-rc7
|
|
+# Tue Jan 8 22:12:20 2008
|
|
#
|
|
CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
# CONFIG_GENERIC_TIME is not set
|
|
+# CONFIG_GENERIC_CLOCKEVENTS is not set
|
|
CONFIG_MMU=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
CONFIG_HARDIRQS_SW_RESEND=y
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
@@ -15,32 +21,36 @@
|
|
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
CONFIG_GENERIC_HWEIGHT=y
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
CONFIG_VECTORS_BASE=0xffff0000
|
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
#
|
|
-# Code maturity level options
|
|
+# General setup
|
|
#
|
|
CONFIG_EXPERIMENTAL=y
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
-
|
|
-#
|
|
-# General setup
|
|
-#
|
|
CONFIG_LOCALVERSION=""
|
|
# CONFIG_LOCALVERSION_AUTO is not set
|
|
# CONFIG_SWAP is not set
|
|
CONFIG_SYSVIPC=y
|
|
-# CONFIG_IPC_NS is not set
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
# CONFIG_POSIX_MQUEUE is not set
|
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
|
# CONFIG_TASKSTATS is not set
|
|
-# CONFIG_UTS_NS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
# CONFIG_AUDIT is not set
|
|
# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
CONFIG_SYSFS_DEPRECATED=y
|
|
# CONFIG_RELAY is not set
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
CONFIG_INITRAMFS_SOURCE=""
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
CONFIG_SYSCTL=y
|
|
@@ -56,32 +66,30 @@
|
|
CONFIG_ELF_CORE=y
|
|
CONFIG_BASE_FULL=y
|
|
CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
CONFIG_SHMEM=y
|
|
-CONFIG_SLAB=y
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
CONFIG_RT_MUTEXES=y
|
|
# CONFIG_TINY_SHMEM is not set
|
|
CONFIG_BASE_SMALL=0
|
|
-# CONFIG_SLOB is not set
|
|
-
|
|
-#
|
|
-# Loadable module support
|
|
-#
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
# CONFIG_MODVERSIONS is not set
|
|
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
CONFIG_KMOD=y
|
|
-
|
|
-#
|
|
-# Block layer
|
|
-#
|
|
CONFIG_BLOCK=y
|
|
# CONFIG_LBD is not set
|
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
|
|
#
|
|
# IO Schedulers
|
|
@@ -113,13 +121,16 @@
|
|
# CONFIG_ARCH_NETX is not set
|
|
# CONFIG_ARCH_H720X is not set
|
|
# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
# CONFIG_ARCH_IOP32X is not set
|
|
# CONFIG_ARCH_IOP33X is not set
|
|
-# CONFIG_ARCH_IOP13XX is not set
|
|
-# CONFIG_ARCH_IXP4XX is not set
|
|
-# CONFIG_ARCH_IXP2000 is not set
|
|
# CONFIG_ARCH_IXP23XX is not set
|
|
+# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_KS8695 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_MXC is not set
|
|
# CONFIG_ARCH_PNX4008 is not set
|
|
# CONFIG_ARCH_PXA is not set
|
|
# CONFIG_ARCH_RPC is not set
|
|
@@ -127,15 +138,27 @@
|
|
# CONFIG_ARCH_S3C2410 is not set
|
|
# CONFIG_ARCH_SHARK is not set
|
|
# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_DAVINCI is not set
|
|
# CONFIG_ARCH_OMAP is not set
|
|
|
|
#
|
|
+# Boot options
|
|
+#
|
|
+
|
|
+#
|
|
+# Power management
|
|
+#
|
|
+
|
|
+#
|
|
# Atmel AT91 System-on-Chip
|
|
#
|
|
# CONFIG_ARCH_AT91RM9200 is not set
|
|
# CONFIG_ARCH_AT91SAM9260 is not set
|
|
# CONFIG_ARCH_AT91SAM9261 is not set
|
|
CONFIG_ARCH_AT91SAM9263=y
|
|
+# CONFIG_ARCH_AT91SAM9RL is not set
|
|
+# CONFIG_ARCH_AT91X40 is not set
|
|
+CONFIG_AT91_PMC_UNIT=y
|
|
|
|
#
|
|
# AT91SAM9263 Board Type
|
|
@@ -152,6 +175,8 @@
|
|
# AT91 Feature Selections
|
|
#
|
|
# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
+CONFIG_AT91_TIMER_HZ=100
|
|
|
|
#
|
|
# Processor Type
|
|
@@ -174,19 +199,19 @@
|
|
# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
|
|
#
|
|
# Bus support
|
|
#
|
|
-
|
|
-#
|
|
-# PCCARD (PCMCIA/CardBus) support
|
|
-#
|
|
+# CONFIG_PCI_SYSCALL is not set
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
# CONFIG_PCCARD is not set
|
|
|
|
#
|
|
# Kernel Features
|
|
#
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
# CONFIG_PREEMPT is not set
|
|
# CONFIG_NO_IDLE_HZ is not set
|
|
CONFIG_HZ=100
|
|
@@ -199,8 +224,12 @@
|
|
CONFIG_FLATMEM=y
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
+CONFIG_BOUNCE=y
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
# CONFIG_LEDS is not set
|
|
CONFIG_ALIGNMENT_TRAP=y
|
|
|
|
@@ -211,6 +240,7 @@
|
|
CONFIG_ZBOOT_ROM_BSS=0x0
|
|
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
|
|
# CONFIG_XIP_KERNEL is not set
|
|
+# CONFIG_KEXEC is not set
|
|
|
|
#
|
|
# Floating point emulation
|
|
@@ -236,7 +266,7 @@
|
|
# Power management options
|
|
#
|
|
# CONFIG_PM is not set
|
|
-# CONFIG_APM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
|
|
#
|
|
# Networking
|
|
@@ -246,7 +276,6 @@
|
|
#
|
|
# Networking options
|
|
#
|
|
-# CONFIG_NETDEBUG is not set
|
|
CONFIG_PACKET=y
|
|
# CONFIG_PACKET_MMAP is not set
|
|
CONFIG_UNIX=y
|
|
@@ -271,6 +300,7 @@
|
|
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_LRO is not set
|
|
# CONFIG_INET_DIAG is not set
|
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
|
CONFIG_TCP_CONG_CUBIC=y
|
|
@@ -281,20 +311,8 @@
|
|
# CONFIG_INET6_TUNNEL is not set
|
|
# CONFIG_NETWORK_SECMARK is not set
|
|
# CONFIG_NETFILTER is not set
|
|
-
|
|
-#
|
|
-# DCCP Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_IP_DCCP is not set
|
|
-
|
|
-#
|
|
-# SCTP Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_IP_SCTP is not set
|
|
-
|
|
-#
|
|
-# TIPC Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_TIPC is not set
|
|
# CONFIG_ATM is not set
|
|
# CONFIG_BRIDGE is not set
|
|
@@ -307,10 +325,6 @@
|
|
# CONFIG_LAPB is not set
|
|
# CONFIG_ECONET is not set
|
|
# CONFIG_WAN_ROUTER is not set
|
|
-
|
|
-#
|
|
-# QoS and/or fair queueing
|
|
-#
|
|
# CONFIG_NET_SCHED is not set
|
|
|
|
#
|
|
@@ -320,7 +334,17 @@
|
|
# CONFIG_HAMRADIO is not set
|
|
# CONFIG_IRDA is not set
|
|
# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
|
|
#
|
|
# Device Drivers
|
|
@@ -329,20 +353,14 @@
|
|
#
|
|
# Generic Driver Options
|
|
#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
CONFIG_STANDALONE=y
|
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
# CONFIG_FW_LOADER is not set
|
|
# CONFIG_DEBUG_DRIVER is not set
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
# CONFIG_SYS_HYPERVISOR is not set
|
|
-
|
|
-#
|
|
-# Connector - unified userspace <-> kernelspace linker
|
|
-#
|
|
# CONFIG_CONNECTOR is not set
|
|
-
|
|
-#
|
|
-# Memory Technology Devices (MTD)
|
|
-#
|
|
CONFIG_MTD=y
|
|
# CONFIG_MTD_DEBUG is not set
|
|
# CONFIG_MTD_CONCAT is not set
|
|
@@ -362,6 +380,7 @@
|
|
# CONFIG_INFTL is not set
|
|
# CONFIG_RFD_FTL is not set
|
|
# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
|
|
#
|
|
# RAM/ROM/Flash chip drivers
|
|
@@ -381,7 +400,6 @@
|
|
# CONFIG_MTD_RAM is not set
|
|
# CONFIG_MTD_ROM is not set
|
|
# CONFIG_MTD_ABSENT is not set
|
|
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
|
|
|
#
|
|
# Mapping drivers for chip access
|
|
@@ -405,35 +423,24 @@
|
|
# CONFIG_MTD_DOC2000 is not set
|
|
# CONFIG_MTD_DOC2001 is not set
|
|
# CONFIG_MTD_DOC2001PLUS is not set
|
|
-
|
|
-#
|
|
-# NAND Flash Device Drivers
|
|
-#
|
|
CONFIG_MTD_NAND=y
|
|
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
CONFIG_MTD_NAND_IDS=y
|
|
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
CONFIG_MTD_NAND_AT91=y
|
|
# CONFIG_MTD_NAND_NANDSIM is not set
|
|
-
|
|
-#
|
|
-# OneNAND Flash Device Drivers
|
|
-#
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ALAUDA is not set
|
|
# CONFIG_MTD_ONENAND is not set
|
|
|
|
#
|
|
-# Parallel port support
|
|
+# UBI - Unsorted block images
|
|
#
|
|
+# CONFIG_MTD_UBI is not set
|
|
# CONFIG_PARPORT is not set
|
|
-
|
|
-#
|
|
-# Plug and Play support
|
|
-#
|
|
-
|
|
-#
|
|
-# Block devices
|
|
-#
|
|
+CONFIG_BLK_DEV=y
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
CONFIG_BLK_DEV_LOOP=y
|
|
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
@@ -443,15 +450,18 @@
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
CONFIG_BLK_DEV_RAM_SIZE=8192
|
|
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
-CONFIG_BLK_DEV_INITRD=y
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+CONFIG_ATMEL_SSC=y
|
|
|
|
#
|
|
# SCSI device support
|
|
#
|
|
# CONFIG_RAID_ATTRS is not set
|
|
CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
# CONFIG_SCSI_TGT is not set
|
|
# CONFIG_SCSI_NETLINK is not set
|
|
CONFIG_SCSI_PROC_FS=y
|
|
@@ -473,6 +483,7 @@
|
|
# CONFIG_SCSI_CONSTANTS is not set
|
|
# CONFIG_SCSI_LOGGING is not set
|
|
# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
|
|
#
|
|
# SCSI Transports
|
|
@@ -480,80 +491,65 @@
|
|
# CONFIG_SCSI_SPI_ATTRS is not set
|
|
# CONFIG_SCSI_FC_ATTRS is not set
|
|
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
-# CONFIG_SCSI_SAS_ATTRS is not set
|
|
# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
-
|
|
-#
|
|
-# SCSI low-level drivers
|
|
-#
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
# CONFIG_ISCSI_TCP is not set
|
|
# CONFIG_SCSI_DEBUG is not set
|
|
-
|
|
-#
|
|
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
|
|
-#
|
|
# CONFIG_ATA is not set
|
|
-
|
|
-#
|
|
-# Multi-device support (RAID and LVM)
|
|
-#
|
|
# CONFIG_MD is not set
|
|
-
|
|
-#
|
|
-# Fusion MPT device support
|
|
-#
|
|
-# CONFIG_FUSION is not set
|
|
-
|
|
-#
|
|
-# IEEE 1394 (FireWire) support
|
|
-#
|
|
-
|
|
-#
|
|
-# I2O device support
|
|
-#
|
|
-
|
|
-#
|
|
-# Network device support
|
|
-#
|
|
CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
# CONFIG_DUMMY is not set
|
|
# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
# CONFIG_EQUALIZER is not set
|
|
# CONFIG_TUN is not set
|
|
+# CONFIG_VETH is not set
|
|
+CONFIG_PHYLIB=y
|
|
|
|
#
|
|
-# PHY device support
|
|
-#
|
|
-# CONFIG_PHYLIB is not set
|
|
-
|
|
-#
|
|
-# Ethernet (10 or 100Mbit)
|
|
+# MII PHY device drivers
|
|
#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+# CONFIG_MDIO_BITBANG is not set
|
|
CONFIG_NET_ETHERNET=y
|
|
CONFIG_MII=y
|
|
+CONFIG_MACB=y
|
|
+# CONFIG_AX88796 is not set
|
|
# CONFIG_SMC91X is not set
|
|
# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+CONFIG_NETDEV_1000=y
|
|
+CONFIG_NETDEV_10000=y
|
|
|
|
#
|
|
-# Ethernet (1000 Mbit)
|
|
-#
|
|
-
|
|
-#
|
|
-# Ethernet (10000 Mbit)
|
|
-#
|
|
-
|
|
-#
|
|
-# Token Ring devices
|
|
-#
|
|
-
|
|
-#
|
|
-# Wireless LAN (non-hamradio)
|
|
+# Wireless LAN
|
|
#
|
|
-# CONFIG_NET_RADIO is not set
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
|
|
#
|
|
-# Wan interfaces
|
|
+# USB Network Adapters
|
|
#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
# CONFIG_WAN is not set
|
|
# CONFIG_PPP is not set
|
|
# CONFIG_SLIP is not set
|
|
@@ -561,10 +557,6 @@
|
|
# CONFIG_NETCONSOLE is not set
|
|
# CONFIG_NETPOLL is not set
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
-
|
|
-#
|
|
-# ISDN subsystem
|
|
-#
|
|
# CONFIG_ISDN is not set
|
|
|
|
#
|
|
@@ -572,6 +564,7 @@
|
|
#
|
|
CONFIG_INPUT=y
|
|
# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
|
|
#
|
|
# Userland interfaces
|
|
@@ -581,20 +574,26 @@
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
# CONFIG_INPUT_JOYDEV is not set
|
|
-CONFIG_INPUT_TSDEV=y
|
|
-CONFIG_INPUT_TSDEV_SCREEN_X=240
|
|
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
|
|
CONFIG_INPUT_EVDEV=y
|
|
# CONFIG_INPUT_EVBUG is not set
|
|
|
|
#
|
|
# Input Device Drivers
|
|
#
|
|
-# CONFIG_INPUT_KEYBOARD is not set
|
|
+CONFIG_INPUT_KEYBOARD=y
|
|
+# CONFIG_KEYBOARD_ATKBD is not set
|
|
+# CONFIG_KEYBOARD_SUNKBD is not set
|
|
+# CONFIG_KEYBOARD_LKKBD is not set
|
|
+# CONFIG_KEYBOARD_XTKBD is not set
|
|
+# CONFIG_KEYBOARD_NEWTON is not set
|
|
+# CONFIG_KEYBOARD_STOWAWAY is not set
|
|
+CONFIG_KEYBOARD_GPIO=y
|
|
# CONFIG_INPUT_MOUSE is not set
|
|
# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
CONFIG_INPUT_TOUCHSCREEN=y
|
|
CONFIG_TOUCHSCREEN_ADS7846=y
|
|
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
|
|
# CONFIG_TOUCHSCREEN_GUNZE is not set
|
|
# CONFIG_TOUCHSCREEN_ELO is not set
|
|
# CONFIG_TOUCHSCREEN_MTOUCH is not set
|
|
@@ -603,6 +602,7 @@
|
|
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
|
|
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
|
|
# CONFIG_TOUCHSCREEN_UCB1400 is not set
|
|
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
|
|
# CONFIG_INPUT_MISC is not set
|
|
|
|
#
|
|
@@ -636,71 +636,47 @@
|
|
CONFIG_UNIX98_PTYS=y
|
|
CONFIG_LEGACY_PTYS=y
|
|
CONFIG_LEGACY_PTY_COUNT=256
|
|
-
|
|
-#
|
|
-# IPMI
|
|
-#
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
-
|
|
-#
|
|
-# Watchdog Cards
|
|
-#
|
|
-CONFIG_WATCHDOG=y
|
|
-CONFIG_WATCHDOG_NOWAYOUT=y
|
|
-
|
|
-#
|
|
-# Watchdog Device Drivers
|
|
-#
|
|
-# CONFIG_SOFT_WATCHDOG is not set
|
|
-
|
|
-#
|
|
-# USB-based Watchdog Cards
|
|
-#
|
|
-# CONFIG_USBPCWATCHDOG is not set
|
|
CONFIG_HW_RANDOM=y
|
|
# CONFIG_NVRAM is not set
|
|
-# CONFIG_DTLK is not set
|
|
# CONFIG_R3964 is not set
|
|
# CONFIG_RAW_DRIVER is not set
|
|
-
|
|
-#
|
|
-# TPM devices
|
|
-#
|
|
# CONFIG_TCG_TPM is not set
|
|
-
|
|
-#
|
|
-# I2C support
|
|
-#
|
|
CONFIG_I2C=y
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
CONFIG_I2C_CHARDEV=y
|
|
|
|
#
|
|
# I2C Algorithms
|
|
#
|
|
-# CONFIG_I2C_ALGOBIT is not set
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
# CONFIG_I2C_ALGOPCF is not set
|
|
# CONFIG_I2C_ALGOPCA is not set
|
|
|
|
#
|
|
# I2C Hardware Bus support
|
|
#
|
|
-CONFIG_I2C_AT91=y
|
|
+CONFIG_I2C_GPIO=y
|
|
# CONFIG_I2C_OCORES is not set
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
# CONFIG_I2C_STUB is not set
|
|
+# CONFIG_I2C_TINY_USB is not set
|
|
# CONFIG_I2C_PCA is not set
|
|
-# CONFIG_I2C_PCA_ISA is not set
|
|
|
|
#
|
|
# Miscellaneous I2C Chip support
|
|
#
|
|
# CONFIG_SENSORS_DS1337 is not set
|
|
# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
# CONFIG_SENSORS_EEPROM is not set
|
|
# CONFIG_SENSORS_PCF8574 is not set
|
|
# CONFIG_SENSORS_PCA9539 is not set
|
|
# CONFIG_SENSORS_PCF8591 is not set
|
|
# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
# CONFIG_I2C_DEBUG_CORE is not set
|
|
# CONFIG_I2C_DEBUG_ALGO is not set
|
|
# CONFIG_I2C_DEBUG_BUS is not set
|
|
@@ -722,61 +698,80 @@
|
|
#
|
|
# SPI Protocol Masters
|
|
#
|
|
-
|
|
-#
|
|
-# Dallas's 1-wire bus
|
|
-#
|
|
+# CONFIG_SPI_AT25 is not set
|
|
+# CONFIG_SPI_SPIDEV is not set
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
|
# CONFIG_W1 is not set
|
|
-
|
|
-#
|
|
-# Hardware Monitoring support
|
|
-#
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
# CONFIG_HWMON is not set
|
|
-# CONFIG_HWMON_VID is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+CONFIG_WATCHDOG_NOWAYOUT=y
|
|
|
|
#
|
|
-# Misc devices
|
|
+# Watchdog Device Drivers
|
|
#
|
|
-# CONFIG_TIFM_CORE is not set
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT91SAM9_WATCHDOG=y
|
|
|
|
#
|
|
-# LED devices
|
|
+# USB-based Watchdog Cards
|
|
#
|
|
-# CONFIG_NEW_LEDS is not set
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
|
|
#
|
|
-# LED drivers
|
|
+# Sonics Silicon Backplane
|
|
#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
|
|
#
|
|
-# LED Triggers
|
|
+# Multifunction device drivers
|
|
#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
|
|
#
|
|
# Multimedia devices
|
|
#
|
|
# CONFIG_VIDEO_DEV is not set
|
|
-
|
|
-#
|
|
-# Digital Video Broadcasting Devices
|
|
-#
|
|
-# CONFIG_DVB is not set
|
|
-# CONFIG_USB_DABUSB is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
|
|
#
|
|
# Graphics support
|
|
#
|
|
-# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
CONFIG_FB=y
|
|
-# CONFIG_FB_CFB_FILLRECT is not set
|
|
-# CONFIG_FB_CFB_COPYAREA is not set
|
|
-# CONFIG_FB_CFB_IMAGEBLIT is not set
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
# CONFIG_FB_MACMODES is not set
|
|
# CONFIG_FB_BACKLIGHT is not set
|
|
# CONFIG_FB_MODE_HELPERS is not set
|
|
# CONFIG_FB_TILEBLITTING is not set
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+# CONFIG_FB_S1D15605 is not set
|
|
# CONFIG_FB_S1D13XXX is not set
|
|
+CONFIG_FB_ATMEL=y
|
|
# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
|
|
#
|
|
# Console display driver support
|
|
@@ -784,26 +779,28 @@
|
|
# CONFIG_VGA_CONSOLE is not set
|
|
CONFIG_DUMMY_CONSOLE=y
|
|
# CONFIG_FRAMEBUFFER_CONSOLE is not set
|
|
-
|
|
-#
|
|
-# Logo configuration
|
|
-#
|
|
# CONFIG_LOGO is not set
|
|
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
|
|
#
|
|
# Sound
|
|
#
|
|
# CONFIG_SOUND is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
|
|
#
|
|
-# HID Devices
|
|
+# USB Input Devices
|
|
#
|
|
-CONFIG_HID=y
|
|
+# CONFIG_USB_HID is not set
|
|
|
|
#
|
|
-# USB support
|
|
+# USB HID Boot Protocol drivers
|
|
#
|
|
+# CONFIG_USB_KBD is not set
|
|
+# CONFIG_USB_MOUSE is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
CONFIG_USB_ARCH_HAS_HCD=y
|
|
CONFIG_USB_ARCH_HAS_OHCI=y
|
|
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
@@ -814,9 +811,8 @@
|
|
# Miscellaneous USB options
|
|
#
|
|
CONFIG_USB_DEVICEFS=y
|
|
-# CONFIG_USB_BANDWIDTH is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
-# CONFIG_USB_MULTITHREAD_PROBE is not set
|
|
# CONFIG_USB_OTG is not set
|
|
|
|
#
|
|
@@ -824,9 +820,11 @@
|
|
#
|
|
# CONFIG_USB_ISP116X_HCD is not set
|
|
CONFIG_USB_OHCI_HCD=y
|
|
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
|
|
#
|
|
# USB Device Class drivers
|
|
@@ -845,6 +843,7 @@
|
|
# CONFIG_USB_STORAGE_DEBUG is not set
|
|
# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
# CONFIG_USB_STORAGE_DPCM is not set
|
|
# CONFIG_USB_STORAGE_USBAT is not set
|
|
# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
@@ -856,43 +855,10 @@
|
|
# CONFIG_USB_LIBUSUAL is not set
|
|
|
|
#
|
|
-# USB Input Devices
|
|
-#
|
|
-# CONFIG_USB_HID is not set
|
|
-
|
|
-#
|
|
-# USB HID Boot Protocol drivers
|
|
-#
|
|
-# CONFIG_USB_KBD is not set
|
|
-# CONFIG_USB_MOUSE is not set
|
|
-# CONFIG_USB_AIPTEK is not set
|
|
-# CONFIG_USB_WACOM is not set
|
|
-# CONFIG_USB_ACECAD is not set
|
|
-# CONFIG_USB_KBTAB is not set
|
|
-# CONFIG_USB_POWERMATE is not set
|
|
-# CONFIG_USB_TOUCHSCREEN is not set
|
|
-# CONFIG_USB_YEALINK is not set
|
|
-# CONFIG_USB_XPAD is not set
|
|
-# CONFIG_USB_ATI_REMOTE is not set
|
|
-# CONFIG_USB_ATI_REMOTE2 is not set
|
|
-# CONFIG_USB_KEYSPAN_REMOTE is not set
|
|
-# CONFIG_USB_APPLETOUCH is not set
|
|
-
|
|
-#
|
|
# USB Imaging devices
|
|
#
|
|
# CONFIG_USB_MDC800 is not set
|
|
# CONFIG_USB_MICROTEK is not set
|
|
-
|
|
-#
|
|
-# USB Network Adapters
|
|
-#
|
|
-# CONFIG_USB_CATC is not set
|
|
-# CONFIG_USB_KAWETH is not set
|
|
-# CONFIG_USB_PEGASUS is not set
|
|
-# CONFIG_USB_RTL8150 is not set
|
|
-# CONFIG_USB_USBNET_MII is not set
|
|
-# CONFIG_USB_USBNET is not set
|
|
CONFIG_USB_MON=y
|
|
|
|
#
|
|
@@ -914,6 +880,7 @@
|
|
# CONFIG_USB_RIO500 is not set
|
|
# CONFIG_USB_LEGOTOWER is not set
|
|
# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
# CONFIG_USB_LED is not set
|
|
# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
# CONFIG_USB_CYTHERM is not set
|
|
@@ -923,6 +890,7 @@
|
|
# CONFIG_USB_APPLEDISPLAY is not set
|
|
# CONFIG_USB_LD is not set
|
|
# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
# CONFIG_USB_TEST is not set
|
|
|
|
#
|
|
@@ -933,13 +901,19 @@
|
|
# USB Gadget Support
|
|
#
|
|
CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG is not set
|
|
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
# CONFIG_USB_GADGET_NET2280 is not set
|
|
# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
# CONFIG_USB_GADGET_GOKU is not set
|
|
# CONFIG_USB_GADGET_LH7A40X is not set
|
|
# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
CONFIG_USB_GADGET_AT91=y
|
|
CONFIG_USB_AT91=y
|
|
# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
@@ -951,21 +925,73 @@
|
|
# CONFIG_USB_FILE_STORAGE_TEST is not set
|
|
CONFIG_USB_G_SERIAL=m
|
|
# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
|
|
#
|
|
-# MMC/SD Card support
|
|
+# MMC/SD Card Drivers
|
|
#
|
|
-CONFIG_MMC=y
|
|
-# CONFIG_MMC_DEBUG is not set
|
|
CONFIG_MMC_BLOCK=y
|
|
-CONFIG_MMC_AT91=m
|
|
-# CONFIG_MMC_TIFM_SD is not set
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
|
|
#
|
|
-# Real Time Clock
|
|
+# MMC/SD Host Controller Drivers
|
|
#
|
|
+CONFIG_MMC_AT91=m
|
|
+# CONFIG_MMC_SPI is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
CONFIG_RTC_LIB=y
|
|
-# CONFIG_RTC_CLASS is not set
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
+
|
|
+#
|
|
+# RTC interfaces
|
|
+#
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
+
|
|
+#
|
|
+# I2C RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
+# CONFIG_RTC_DRV_DS1374 is not set
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
|
+
|
|
+#
|
|
+# SPI RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
|
+
|
|
+#
|
|
+# Platform RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_CMOS is not set
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
+
|
|
+#
|
|
+# on-CPU RTC drivers
|
|
+#
|
|
+CONFIG_RTC_DRV_AT91SAM9=y
|
|
|
|
#
|
|
# File systems
|
|
@@ -1016,7 +1042,6 @@
|
|
CONFIG_TMPFS=y
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
-CONFIG_RAMFS=y
|
|
# CONFIG_CONFIGFS_FS is not set
|
|
|
|
#
|
|
@@ -1032,10 +1057,12 @@
|
|
CONFIG_JFFS2_FS=y
|
|
CONFIG_JFFS2_FS_DEBUG=0
|
|
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
|
# CONFIG_JFFS2_SUMMARY is not set
|
|
# CONFIG_JFFS2_FS_XATTR is not set
|
|
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
CONFIG_JFFS2_ZLIB=y
|
|
+# CONFIG_JFFS2_LZO is not set
|
|
CONFIG_JFFS2_RTIME=y
|
|
# CONFIG_JFFS2_RUBIN is not set
|
|
CONFIG_CRAMFS=y
|
|
@@ -1044,10 +1071,7 @@
|
|
# CONFIG_QNX4FS_FS is not set
|
|
# CONFIG_SYSV_FS is not set
|
|
# CONFIG_UFS_FS is not set
|
|
-
|
|
-#
|
|
-# Network File Systems
|
|
-#
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
CONFIG_NFS_FS=y
|
|
# CONFIG_NFS_V3 is not set
|
|
# CONFIG_NFS_V4 is not set
|
|
@@ -1057,6 +1081,7 @@
|
|
CONFIG_LOCKD=y
|
|
CONFIG_NFS_COMMON=y
|
|
CONFIG_SUNRPC=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
|
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
# CONFIG_SMB_FS is not set
|
|
@@ -1064,17 +1089,12 @@
|
|
# CONFIG_NCP_FS is not set
|
|
# CONFIG_CODA_FS is not set
|
|
# CONFIG_AFS_FS is not set
|
|
-# CONFIG_9P_FS is not set
|
|
|
|
#
|
|
# Partition Types
|
|
#
|
|
# CONFIG_PARTITION_ADVANCED is not set
|
|
CONFIG_MSDOS_PARTITION=y
|
|
-
|
|
-#
|
|
-# Native Language Support
|
|
-#
|
|
CONFIG_NLS=y
|
|
CONFIG_NLS_DEFAULT="iso8859-1"
|
|
CONFIG_NLS_CODEPAGE_437=y
|
|
@@ -1115,36 +1135,35 @@
|
|
# CONFIG_NLS_KOI8_R is not set
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
# CONFIG_NLS_UTF8 is not set
|
|
-
|
|
-#
|
|
-# Distributed Lock Manager
|
|
-#
|
|
# CONFIG_DLM is not set
|
|
-
|
|
-#
|
|
-# Profiling support
|
|
-#
|
|
+CONFIG_INSTRUMENTATION=y
|
|
# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
#
|
|
# Kernel hacking
|
|
#
|
|
# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
CONFIG_ENABLE_MUST_CHECK=y
|
|
# CONFIG_MAGIC_SYSRQ is not set
|
|
# CONFIG_UNUSED_SYMBOLS is not set
|
|
# CONFIG_DEBUG_FS is not set
|
|
# CONFIG_HEADERS_CHECK is not set
|
|
CONFIG_DEBUG_KERNEL=y
|
|
-CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
# CONFIG_SCHEDSTATS is not set
|
|
+# CONFIG_TIMER_STATS is not set
|
|
# CONFIG_DEBUG_SLAB is not set
|
|
# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
# CONFIG_RT_MUTEX_TESTER is not set
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
|
# CONFIG_DEBUG_MUTEXES is not set
|
|
-# CONFIG_DEBUG_RWSEMS is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
# CONFIG_DEBUG_KOBJECT is not set
|
|
@@ -1152,9 +1171,13 @@
|
|
# CONFIG_DEBUG_INFO is not set
|
|
# CONFIG_DEBUG_VM is not set
|
|
# CONFIG_DEBUG_LIST is not set
|
|
+# CONFIG_DEBUG_SG is not set
|
|
CONFIG_FRAME_POINTER=y
|
|
CONFIG_FORCED_INLINING=y
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
CONFIG_DEBUG_USER=y
|
|
# CONFIG_DEBUG_ERRORS is not set
|
|
CONFIG_DEBUG_LL=y
|
|
@@ -1165,10 +1188,7 @@
|
|
#
|
|
# CONFIG_KEYS is not set
|
|
# CONFIG_SECURITY is not set
|
|
-
|
|
-#
|
|
-# Cryptographic options
|
|
-#
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
# CONFIG_CRYPTO is not set
|
|
|
|
#
|
|
@@ -1177,8 +1197,13 @@
|
|
CONFIG_BITREVERSE=y
|
|
# CONFIG_CRC_CCITT is not set
|
|
# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
# CONFIG_LIBCRC32C is not set
|
|
CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_ZLIB_DEFLATE=y
|
|
CONFIG_PLIST=y
|
|
-CONFIG_IOMAP_COPY=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9rlek_defconfig linux-2.6/arch/arm/configs/at91sam9rlek_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/at91sam9rlek_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/at91sam9rlek_defconfig 2008-01-08 22:24:22.000000000 +0200
|
|
@@ -1,15 +1,18 @@
|
|
#
|
|
# Automatically generated make config: don't edit
|
|
-# Linux kernel version: 2.6.21
|
|
-# Mon May 7 16:30:40 2007
|
|
+# Linux kernel version: 2.6.24-rc7
|
|
+# Tue Jan 8 22:24:14 2008
|
|
#
|
|
CONFIG_ARM=y
|
|
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
CONFIG_GENERIC_GPIO=y
|
|
# CONFIG_GENERIC_TIME is not set
|
|
+# CONFIG_GENERIC_CLOCKEVENTS is not set
|
|
CONFIG_MMU=y
|
|
# CONFIG_NO_IOPORT is not set
|
|
CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
CONFIG_HARDIRQS_SW_RESEND=y
|
|
CONFIG_GENERIC_IRQ_PROBE=y
|
|
@@ -23,27 +26,28 @@
|
|
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
#
|
|
-# Code maturity level options
|
|
+# General setup
|
|
#
|
|
CONFIG_EXPERIMENTAL=y
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
-
|
|
-#
|
|
-# General setup
|
|
-#
|
|
CONFIG_LOCALVERSION=""
|
|
# CONFIG_LOCALVERSION_AUTO is not set
|
|
# CONFIG_SWAP is not set
|
|
CONFIG_SYSVIPC=y
|
|
-# CONFIG_IPC_NS is not set
|
|
CONFIG_SYSVIPC_SYSCTL=y
|
|
# CONFIG_POSIX_MQUEUE is not set
|
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
|
# CONFIG_TASKSTATS is not set
|
|
-# CONFIG_UTS_NS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
# CONFIG_AUDIT is not set
|
|
# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
CONFIG_SYSFS_DEPRECATED=y
|
|
# CONFIG_RELAY is not set
|
|
CONFIG_BLK_DEV_INITRD=y
|
|
@@ -62,32 +66,30 @@
|
|
CONFIG_ELF_CORE=y
|
|
CONFIG_BASE_FULL=y
|
|
CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
CONFIG_SHMEM=y
|
|
-CONFIG_SLAB=y
|
|
CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
CONFIG_RT_MUTEXES=y
|
|
# CONFIG_TINY_SHMEM is not set
|
|
CONFIG_BASE_SMALL=0
|
|
-# CONFIG_SLOB is not set
|
|
-
|
|
-#
|
|
-# Loadable module support
|
|
-#
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
# CONFIG_MODVERSIONS is not set
|
|
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
CONFIG_KMOD=y
|
|
-
|
|
-#
|
|
-# Block layer
|
|
-#
|
|
CONFIG_BLOCK=y
|
|
# CONFIG_LBD is not set
|
|
# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
|
|
#
|
|
# IO Schedulers
|
|
@@ -119,14 +121,16 @@
|
|
# CONFIG_ARCH_NETX is not set
|
|
# CONFIG_ARCH_H720X is not set
|
|
# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
# CONFIG_ARCH_IOP32X is not set
|
|
# CONFIG_ARCH_IOP33X is not set
|
|
-# CONFIG_ARCH_IOP13XX is not set
|
|
-# CONFIG_ARCH_IXP4XX is not set
|
|
-# CONFIG_ARCH_IXP2000 is not set
|
|
# CONFIG_ARCH_IXP23XX is not set
|
|
+# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_KS8695 is not set
|
|
# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_MXC is not set
|
|
# CONFIG_ARCH_PNX4008 is not set
|
|
# CONFIG_ARCH_PXA is not set
|
|
# CONFIG_ARCH_RPC is not set
|
|
@@ -134,9 +138,18 @@
|
|
# CONFIG_ARCH_S3C2410 is not set
|
|
# CONFIG_ARCH_SHARK is not set
|
|
# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_DAVINCI is not set
|
|
# CONFIG_ARCH_OMAP is not set
|
|
|
|
#
|
|
+# Boot options
|
|
+#
|
|
+
|
|
+#
|
|
+# Power management
|
|
+#
|
|
+
|
|
+#
|
|
# Atmel AT91 System-on-Chip
|
|
#
|
|
# CONFIG_ARCH_AT91RM9200 is not set
|
|
@@ -144,6 +157,8 @@
|
|
# CONFIG_ARCH_AT91SAM9261 is not set
|
|
# CONFIG_ARCH_AT91SAM9263 is not set
|
|
CONFIG_ARCH_AT91SAM9RL=y
|
|
+# CONFIG_ARCH_AT91X40 is not set
|
|
+CONFIG_AT91_PMC_UNIT=y
|
|
|
|
#
|
|
# AT91SAM9RL Board Type
|
|
@@ -157,7 +172,9 @@
|
|
#
|
|
# AT91 Feature Selections
|
|
#
|
|
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
|
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
+CONFIG_AT91_TIMER_HZ=100
|
|
|
|
#
|
|
# Processor Type
|
|
@@ -185,15 +202,14 @@
|
|
#
|
|
# Bus support
|
|
#
|
|
-
|
|
-#
|
|
-# PCCARD (PCMCIA/CardBus) support
|
|
-#
|
|
+# CONFIG_PCI_SYSCALL is not set
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
# CONFIG_PCCARD is not set
|
|
|
|
#
|
|
# Kernel Features
|
|
#
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
# CONFIG_PREEMPT is not set
|
|
# CONFIG_NO_IDLE_HZ is not set
|
|
CONFIG_HZ=100
|
|
@@ -206,9 +222,12 @@
|
|
CONFIG_FLATMEM=y
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
# CONFIG_RESOURCES_64BIT is not set
|
|
CONFIG_ZONE_DMA_FLAG=1
|
|
+CONFIG_BOUNCE=y
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
# CONFIG_LEDS is not set
|
|
CONFIG_ALIGNMENT_TRAP=y
|
|
|
|
@@ -245,6 +264,7 @@
|
|
# Power management options
|
|
#
|
|
# CONFIG_PM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
|
|
#
|
|
# Networking
|
|
@@ -254,7 +274,6 @@
|
|
#
|
|
# Networking options
|
|
#
|
|
-# CONFIG_NETDEBUG is not set
|
|
# CONFIG_PACKET is not set
|
|
CONFIG_UNIX=y
|
|
# CONFIG_NET_KEY is not set
|
|
@@ -271,10 +290,6 @@
|
|
# CONFIG_X25 is not set
|
|
# CONFIG_LAPB is not set
|
|
# CONFIG_WAN_ROUTER is not set
|
|
-
|
|
-#
|
|
-# QoS and/or fair queueing
|
|
-#
|
|
# CONFIG_NET_SCHED is not set
|
|
|
|
#
|
|
@@ -284,7 +299,16 @@
|
|
# CONFIG_HAMRADIO is not set
|
|
# CONFIG_IRDA is not set
|
|
# CONFIG_BT is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
|
|
#
|
|
# Device Drivers
|
|
@@ -293,21 +317,14 @@
|
|
#
|
|
# Generic Driver Options
|
|
#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
CONFIG_STANDALONE=y
|
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
# CONFIG_FW_LOADER is not set
|
|
# CONFIG_DEBUG_DRIVER is not set
|
|
# CONFIG_DEBUG_DEVRES is not set
|
|
# CONFIG_SYS_HYPERVISOR is not set
|
|
-
|
|
-#
|
|
-# Connector - unified userspace <-> kernelspace linker
|
|
-#
|
|
# CONFIG_CONNECTOR is not set
|
|
-
|
|
-#
|
|
-# Memory Technology Devices (MTD)
|
|
-#
|
|
CONFIG_MTD=y
|
|
# CONFIG_MTD_DEBUG is not set
|
|
CONFIG_MTD_CONCAT=y
|
|
@@ -327,6 +344,7 @@
|
|
# CONFIG_INFTL is not set
|
|
# CONFIG_RFD_FTL is not set
|
|
# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
|
|
#
|
|
# RAM/ROM/Flash chip drivers
|
|
@@ -346,7 +364,6 @@
|
|
# CONFIG_MTD_RAM is not set
|
|
# CONFIG_MTD_ROM is not set
|
|
# CONFIG_MTD_ABSENT is not set
|
|
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
|
|
|
#
|
|
# Mapping drivers for chip access
|
|
@@ -370,36 +387,23 @@
|
|
# CONFIG_MTD_DOC2000 is not set
|
|
# CONFIG_MTD_DOC2001 is not set
|
|
# CONFIG_MTD_DOC2001PLUS is not set
|
|
-
|
|
-#
|
|
-# NAND Flash Device Drivers
|
|
-#
|
|
CONFIG_MTD_NAND=y
|
|
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
CONFIG_MTD_NAND_IDS=y
|
|
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
CONFIG_MTD_NAND_AT91=y
|
|
# CONFIG_MTD_NAND_NANDSIM is not set
|
|
-
|
|
-#
|
|
-# OneNAND Flash Device Drivers
|
|
-#
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
# CONFIG_MTD_ONENAND is not set
|
|
|
|
#
|
|
-# Parallel port support
|
|
+# UBI - Unsorted block images
|
|
#
|
|
+# CONFIG_MTD_UBI is not set
|
|
# CONFIG_PARPORT is not set
|
|
-
|
|
-#
|
|
-# Plug and Play support
|
|
-#
|
|
-# CONFIG_PNPACPI is not set
|
|
-
|
|
-#
|
|
-# Block devices
|
|
-#
|
|
+CONFIG_BLK_DEV=y
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
CONFIG_BLK_DEV_LOOP=y
|
|
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
@@ -410,12 +414,16 @@
|
|
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+CONFIG_ATMEL_SSC=y
|
|
|
|
#
|
|
# SCSI device support
|
|
#
|
|
# CONFIG_RAID_ATTRS is not set
|
|
CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
# CONFIG_SCSI_TGT is not set
|
|
# CONFIG_SCSI_NETLINK is not set
|
|
CONFIG_SCSI_PROC_FS=y
|
|
@@ -437,6 +445,7 @@
|
|
# CONFIG_SCSI_CONSTANTS is not set
|
|
# CONFIG_SCSI_LOGGING is not set
|
|
# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
|
|
#
|
|
# SCSI Transports
|
|
@@ -444,47 +453,13 @@
|
|
# CONFIG_SCSI_SPI_ATTRS is not set
|
|
# CONFIG_SCSI_FC_ATTRS is not set
|
|
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
-# CONFIG_SCSI_SAS_ATTRS is not set
|
|
# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
-
|
|
-#
|
|
-# SCSI low-level drivers
|
|
-#
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
# CONFIG_SCSI_DEBUG is not set
|
|
-
|
|
-#
|
|
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
|
|
-#
|
|
# CONFIG_ATA is not set
|
|
-
|
|
-#
|
|
-# Multi-device support (RAID and LVM)
|
|
-#
|
|
# CONFIG_MD is not set
|
|
-
|
|
-#
|
|
-# Fusion MPT device support
|
|
-#
|
|
-# CONFIG_FUSION is not set
|
|
-
|
|
-#
|
|
-# IEEE 1394 (FireWire) support
|
|
-#
|
|
-
|
|
-#
|
|
-# I2O device support
|
|
-#
|
|
-
|
|
-#
|
|
-# Network device support
|
|
-#
|
|
# CONFIG_NETDEVICES is not set
|
|
-# CONFIG_NETPOLL is not set
|
|
-# CONFIG_NET_POLL_CONTROLLER is not set
|
|
-
|
|
-#
|
|
-# ISDN subsystem
|
|
-#
|
|
# CONFIG_ISDN is not set
|
|
|
|
#
|
|
@@ -492,6 +467,7 @@
|
|
#
|
|
CONFIG_INPUT=y
|
|
# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
|
|
#
|
|
# Userland interfaces
|
|
@@ -501,7 +477,6 @@
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
|
|
# CONFIG_INPUT_JOYDEV is not set
|
|
-# CONFIG_INPUT_TSDEV is not set
|
|
CONFIG_INPUT_EVDEV=y
|
|
# CONFIG_INPUT_EVBUG is not set
|
|
|
|
@@ -511,8 +486,10 @@
|
|
# CONFIG_INPUT_KEYBOARD is not set
|
|
# CONFIG_INPUT_MOUSE is not set
|
|
# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
CONFIG_INPUT_TOUCHSCREEN=y
|
|
# CONFIG_TOUCHSCREEN_ADS7846 is not set
|
|
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
|
|
# CONFIG_TOUCHSCREEN_GUNZE is not set
|
|
# CONFIG_TOUCHSCREEN_ELO is not set
|
|
# CONFIG_TOUCHSCREEN_MTOUCH is not set
|
|
@@ -521,6 +498,7 @@
|
|
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
|
|
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
|
|
# CONFIG_TOUCHSCREEN_UCB1400 is not set
|
|
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
|
|
# CONFIG_INPUT_MISC is not set
|
|
|
|
#
|
|
@@ -554,37 +532,50 @@
|
|
CONFIG_UNIX98_PTYS=y
|
|
CONFIG_LEGACY_PTYS=y
|
|
CONFIG_LEGACY_PTY_COUNT=256
|
|
-
|
|
-#
|
|
-# IPMI
|
|
-#
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
-
|
|
-#
|
|
-# Watchdog Cards
|
|
-#
|
|
-CONFIG_WATCHDOG=y
|
|
-CONFIG_WATCHDOG_NOWAYOUT=y
|
|
-
|
|
-#
|
|
-# Watchdog Device Drivers
|
|
-#
|
|
-# CONFIG_SOFT_WATCHDOG is not set
|
|
-CONFIG_HW_RANDOM=y
|
|
+# CONFIG_HW_RANDOM is not set
|
|
# CONFIG_NVRAM is not set
|
|
-# CONFIG_DTLK is not set
|
|
# CONFIG_R3964 is not set
|
|
# CONFIG_RAW_DRIVER is not set
|
|
-
|
|
-#
|
|
-# TPM devices
|
|
-#
|
|
# CONFIG_TCG_TPM is not set
|
|
-
|
|
-#
|
|
-# I2C support
|
|
-#
|
|
-# CONFIG_I2C is not set
|
|
+CONFIG_I2C=y
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
+CONFIG_I2C_CHARDEV=y
|
|
+
|
|
+#
|
|
+# I2C Algorithms
|
|
+#
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
|
+
|
|
+#
|
|
+# I2C Hardware Bus support
|
|
+#
|
|
+CONFIG_I2C_GPIO=y
|
|
+# CONFIG_I2C_OCORES is not set
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
+# CONFIG_I2C_STUB is not set
|
|
+# CONFIG_I2C_PCA is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous I2C Chip support
|
|
+#
|
|
+# CONFIG_SENSORS_DS1337 is not set
|
|
+# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
|
+# CONFIG_SENSORS_PCA9539 is not set
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
|
|
|
#
|
|
# SPI support
|
|
@@ -603,21 +594,25 @@
|
|
# SPI Protocol Masters
|
|
#
|
|
# CONFIG_SPI_AT25 is not set
|
|
-
|
|
-#
|
|
-# Dallas's 1-wire bus
|
|
-#
|
|
+# CONFIG_SPI_SPIDEV is not set
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
|
# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+CONFIG_WATCHDOG_NOWAYOUT=y
|
|
|
|
#
|
|
-# Hardware Monitoring support
|
|
+# Watchdog Device Drivers
|
|
#
|
|
-# CONFIG_HWMON is not set
|
|
-# CONFIG_HWMON_VID is not set
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT91SAM9_WATCHDOG=y
|
|
|
|
#
|
|
-# Misc devices
|
|
+# Sonics Silicon Backplane
|
|
#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
|
|
#
|
|
# Multifunction device drivers
|
|
@@ -625,37 +620,28 @@
|
|
# CONFIG_MFD_SM501 is not set
|
|
|
|
#
|
|
-# LED devices
|
|
-#
|
|
-# CONFIG_NEW_LEDS is not set
|
|
-
|
|
-#
|
|
-# LED drivers
|
|
-#
|
|
-
|
|
-#
|
|
-# LED Triggers
|
|
-#
|
|
-
|
|
-#
|
|
# Multimedia devices
|
|
#
|
|
# CONFIG_VIDEO_DEV is not set
|
|
-
|
|
-#
|
|
-# Digital Video Broadcasting Devices
|
|
-#
|
|
+# CONFIG_DAB is not set
|
|
|
|
#
|
|
# Graphics support
|
|
#
|
|
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
CONFIG_FB=y
|
|
# CONFIG_FIRMWARE_EDID is not set
|
|
# CONFIG_FB_DDC is not set
|
|
CONFIG_FB_CFB_FILLRECT=y
|
|
CONFIG_FB_CFB_COPYAREA=y
|
|
CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
|
+# CONFIG_FB_SYS_FILLRECT is not set
|
|
+# CONFIG_FB_SYS_COPYAREA is not set
|
|
+# CONFIG_FB_SYS_IMAGEBLIT is not set
|
|
+# CONFIG_FB_SYS_FOPS is not set
|
|
+CONFIG_FB_DEFERRED_IO=y
|
|
# CONFIG_FB_SVGALIB is not set
|
|
# CONFIG_FB_MACMODES is not set
|
|
# CONFIG_FB_BACKLIGHT is not set
|
|
@@ -665,9 +651,16 @@
|
|
#
|
|
# Frame buffer hardware drivers
|
|
#
|
|
+# CONFIG_FB_S1D15605 is not set
|
|
# CONFIG_FB_S1D13XXX is not set
|
|
CONFIG_FB_ATMEL=y
|
|
# CONFIG_FB_VIRTUAL is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
|
|
#
|
|
# Console display driver support
|
|
@@ -675,97 +668,97 @@
|
|
# CONFIG_VGA_CONSOLE is not set
|
|
CONFIG_DUMMY_CONSOLE=y
|
|
# CONFIG_FRAMEBUFFER_CONSOLE is not set
|
|
-
|
|
-#
|
|
-# Logo configuration
|
|
-#
|
|
# CONFIG_LOGO is not set
|
|
|
|
#
|
|
# Sound
|
|
#
|
|
-CONFIG_SOUND=y
|
|
-
|
|
-#
|
|
-# Advanced Linux Sound Architecture
|
|
-#
|
|
-CONFIG_SND=y
|
|
-CONFIG_SND_TIMER=y
|
|
-CONFIG_SND_PCM=y
|
|
-CONFIG_SND_SEQUENCER=y
|
|
-CONFIG_SND_SEQ_DUMMY=y
|
|
-CONFIG_SND_OSSEMUL=y
|
|
-CONFIG_SND_MIXER_OSS=y
|
|
-CONFIG_SND_PCM_OSS=y
|
|
-CONFIG_SND_PCM_OSS_PLUGINS=y
|
|
-CONFIG_SND_SEQUENCER_OSS=y
|
|
-# CONFIG_SND_DYNAMIC_MINORS is not set
|
|
-CONFIG_SND_SUPPORT_OLD_API=y
|
|
-CONFIG_SND_VERBOSE_PROCFS=y
|
|
-CONFIG_SND_VERBOSE_PRINTK=y
|
|
-CONFIG_SND_DEBUG=y
|
|
-CONFIG_SND_DEBUG_DETECT=y
|
|
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
|
|
-
|
|
-#
|
|
-# Generic devices
|
|
-#
|
|
-# CONFIG_SND_DUMMY is not set
|
|
-# CONFIG_SND_VIRMIDI is not set
|
|
-# CONFIG_SND_MTPAV is not set
|
|
-# CONFIG_SND_SERIAL_U16550 is not set
|
|
-# CONFIG_SND_MPU401 is not set
|
|
+# CONFIG_SOUND is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+# CONFIG_HIDRAW is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+# CONFIG_USB is not set
|
|
|
|
#
|
|
-# ALSA ARM devices
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
#
|
|
|
|
#
|
|
-# SoC audio support
|
|
+# USB Gadget Support
|
|
#
|
|
-# CONFIG_SND_SOC is not set
|
|
+# CONFIG_USB_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
|
|
#
|
|
-# Open Sound System
|
|
+# MMC/SD Card Drivers
|
|
#
|
|
-# CONFIG_SOUND_PRIME is not set
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
|
|
#
|
|
-# HID Devices
|
|
+# MMC/SD Host Controller Drivers
|
|
#
|
|
-CONFIG_HID=y
|
|
-# CONFIG_HID_DEBUG is not set
|
|
+CONFIG_MMC_AT91=y
|
|
+# CONFIG_MMC_SPI is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
|
|
#
|
|
-# USB support
|
|
+# RTC interfaces
|
|
#
|
|
-CONFIG_USB_ARCH_HAS_HCD=y
|
|
-CONFIG_USB_ARCH_HAS_OHCI=y
|
|
-# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
-# CONFIG_USB is not set
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
|
|
#
|
|
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+# I2C RTC drivers
|
|
#
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
+# CONFIG_RTC_DRV_DS1374 is not set
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
|
|
|
#
|
|
-# USB Gadget Support
|
|
+# SPI RTC drivers
|
|
#
|
|
-# CONFIG_USB_GADGET is not set
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
|
|
|
#
|
|
-# MMC/SD Card support
|
|
+# Platform RTC drivers
|
|
#
|
|
-CONFIG_MMC=y
|
|
-# CONFIG_MMC_DEBUG is not set
|
|
-CONFIG_MMC_BLOCK=y
|
|
-CONFIG_MMC_AT91=y
|
|
+# CONFIG_RTC_DRV_CMOS is not set
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
#
|
|
-# Real Time Clock
|
|
+# on-CPU RTC drivers
|
|
#
|
|
-CONFIG_RTC_LIB=y
|
|
-# CONFIG_RTC_CLASS is not set
|
|
+CONFIG_RTC_DRV_AT91SAM9=y
|
|
|
|
#
|
|
# File systems
|
|
@@ -816,7 +809,6 @@
|
|
CONFIG_TMPFS=y
|
|
# CONFIG_TMPFS_POSIX_ACL is not set
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
-CONFIG_RAMFS=y
|
|
# CONFIG_CONFIGFS_FS is not set
|
|
|
|
#
|
|
@@ -836,20 +828,13 @@
|
|
# CONFIG_QNX4FS_FS is not set
|
|
# CONFIG_SYSV_FS is not set
|
|
# CONFIG_UFS_FS is not set
|
|
-
|
|
-#
|
|
-# Network File Systems
|
|
-#
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
|
|
#
|
|
# Partition Types
|
|
#
|
|
# CONFIG_PARTITION_ADVANCED is not set
|
|
CONFIG_MSDOS_PARTITION=y
|
|
-
|
|
-#
|
|
-# Native Language Support
|
|
-#
|
|
CONFIG_NLS=y
|
|
CONFIG_NLS_DEFAULT="iso8859-1"
|
|
CONFIG_NLS_CODEPAGE_437=y
|
|
@@ -890,16 +875,15 @@
|
|
# CONFIG_NLS_KOI8_R is not set
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
CONFIG_NLS_UTF8=y
|
|
-
|
|
-#
|
|
-# Profiling support
|
|
-#
|
|
+CONFIG_INSTRUMENTATION=y
|
|
# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
#
|
|
# Kernel hacking
|
|
#
|
|
# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
CONFIG_ENABLE_MUST_CHECK=y
|
|
# CONFIG_MAGIC_SYSRQ is not set
|
|
# CONFIG_UNUSED_SYMBOLS is not set
|
|
@@ -907,8 +891,8 @@
|
|
# CONFIG_HEADERS_CHECK is not set
|
|
CONFIG_DEBUG_KERNEL=y
|
|
# CONFIG_DEBUG_SHIRQ is not set
|
|
-CONFIG_LOG_BUF_SHIFT=14
|
|
CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
# CONFIG_SCHEDSTATS is not set
|
|
# CONFIG_TIMER_STATS is not set
|
|
# CONFIG_DEBUG_SLAB is not set
|
|
@@ -916,6 +900,9 @@
|
|
# CONFIG_RT_MUTEX_TESTER is not set
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
|
# CONFIG_DEBUG_MUTEXES is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
# CONFIG_DEBUG_KOBJECT is not set
|
|
@@ -923,10 +910,13 @@
|
|
CONFIG_DEBUG_INFO=y
|
|
# CONFIG_DEBUG_VM is not set
|
|
# CONFIG_DEBUG_LIST is not set
|
|
+# CONFIG_DEBUG_SG is not set
|
|
CONFIG_FRAME_POINTER=y
|
|
CONFIG_FORCED_INLINING=y
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
|
# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
CONFIG_DEBUG_USER=y
|
|
# CONFIG_DEBUG_ERRORS is not set
|
|
CONFIG_DEBUG_LL=y
|
|
@@ -937,10 +927,7 @@
|
|
#
|
|
# CONFIG_KEYS is not set
|
|
# CONFIG_SECURITY is not set
|
|
-
|
|
-#
|
|
-# Cryptographic options
|
|
-#
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
# CONFIG_CRYPTO is not set
|
|
|
|
#
|
|
@@ -949,9 +936,12 @@
|
|
CONFIG_BITREVERSE=y
|
|
# CONFIG_CRC_CCITT is not set
|
|
# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
# CONFIG_LIBCRC32C is not set
|
|
CONFIG_ZLIB_INFLATE=y
|
|
CONFIG_PLIST=y
|
|
CONFIG_HAS_IOMEM=y
|
|
CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/ateb9200_defconfig linux-2.6/arch/arm/configs/ateb9200_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/ateb9200_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/ateb9200_defconfig 2007-12-31 10:43:35.000000000 +0200
|
|
@@ -714,7 +714,7 @@
|
|
#
|
|
# I2C Hardware Bus support
|
|
#
|
|
-CONFIG_I2C_AT91=m
|
|
+CONFIG_I2C_GPIO=m
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
# CONFIG_I2C_STUB is not set
|
|
# CONFIG_I2C_PCA_ISA is not set
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/cam60_defconfig linux-2.6/arch/arm/configs/cam60_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/cam60_defconfig 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/cam60_defconfig 2008-01-11 09:36:44.000000000 +0200
|
|
@@ -0,0 +1,1217 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.23
|
|
+# Wed Jan 9 22:44:49 2008
|
|
+#
|
|
+CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
+# CONFIG_GENERIC_TIME is not set
|
|
+# CONFIG_GENERIC_CLOCKEVENTS is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
+CONFIG_VECTORS_BASE=0xffff0000
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+# CONFIG_LOCALVERSION_AUTO is not set
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+CONFIG_POSIX_MQUEUE=y
|
|
+CONFIG_BSD_PROCESS_ACCT=y
|
|
+CONFIG_BSD_PROCESS_ACCT_V3=y
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+CONFIG_AUDIT=y
|
|
+CONFIG_IKCONFIG=y
|
|
+CONFIG_IKCONFIG_PROC=y
|
|
+CONFIG_LOG_BUF_SHIFT=17
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+CONFIG_RELAY=y
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
+CONFIG_INITRAMFS_SOURCE=""
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+CONFIG_EMBEDDED=y
|
|
+CONFIG_UID16=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+CONFIG_KALLSYMS_ALL=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLUB_DEBUG=y
|
|
+# CONFIG_SLAB is not set
|
|
+CONFIG_SLUB=y
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
+CONFIG_KMOD=y
|
|
+CONFIG_BLOCK=y
|
|
+CONFIG_LBD=y
|
|
+CONFIG_BLK_DEV_IO_TRACE=y
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+# CONFIG_DEFAULT_AS is not set
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+CONFIG_DEFAULT_CFQ=y
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="cfq"
|
|
+
|
|
+#
|
|
+# System Type
|
|
+#
|
|
+# CONFIG_ARCH_AAEC2000 is not set
|
|
+# CONFIG_ARCH_INTEGRATOR is not set
|
|
+# CONFIG_ARCH_REALVIEW is not set
|
|
+# CONFIG_ARCH_VERSATILE is not set
|
|
+CONFIG_ARCH_AT91=y
|
|
+# CONFIG_ARCH_CLPS7500 is not set
|
|
+# CONFIG_ARCH_CLPS711X is not set
|
|
+# CONFIG_ARCH_CO285 is not set
|
|
+# CONFIG_ARCH_EBSA110 is not set
|
|
+# CONFIG_ARCH_EP93XX is not set
|
|
+# CONFIG_ARCH_FOOTBRIDGE is not set
|
|
+# CONFIG_ARCH_NETX is not set
|
|
+# CONFIG_ARCH_H720X is not set
|
|
+# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
+# CONFIG_ARCH_IOP32X is not set
|
|
+# CONFIG_ARCH_IOP33X is not set
|
|
+# CONFIG_ARCH_IXP23XX is not set
|
|
+# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
+# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_KS8695 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_MXC is not set
|
|
+# CONFIG_ARCH_PNX4008 is not set
|
|
+# CONFIG_ARCH_PXA is not set
|
|
+# CONFIG_ARCH_RPC is not set
|
|
+# CONFIG_ARCH_SA1100 is not set
|
|
+# CONFIG_ARCH_S3C2410 is not set
|
|
+# CONFIG_ARCH_SHARK is not set
|
|
+# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_DAVINCI is not set
|
|
+# CONFIG_ARCH_OMAP is not set
|
|
+
|
|
+#
|
|
+# Boot options
|
|
+#
|
|
+
|
|
+#
|
|
+# Power management
|
|
+#
|
|
+
|
|
+#
|
|
+# Atmel AT91 System-on-Chip
|
|
+#
|
|
+# CONFIG_ARCH_AT91RM9200 is not set
|
|
+CONFIG_ARCH_AT91SAM9260=y
|
|
+# CONFIG_ARCH_AT91SAM9261 is not set
|
|
+# CONFIG_ARCH_AT91SAM9263 is not set
|
|
+# CONFIG_ARCH_AT91SAM9RL is not set
|
|
+
|
|
+#
|
|
+# AT91SAM9260 Variants
|
|
+#
|
|
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
|
|
+
|
|
+#
|
|
+# AT91SAM9260 / AT91SAM9XE Board Type
|
|
+#
|
|
+# CONFIG_MACH_AT91SAM9260EK is not set
|
|
+CONFIG_MACH_CAM60=y
|
|
+# CONFIG_MACH_SAM9_L9260 is not set
|
|
+
|
|
+#
|
|
+# AT91 Board Options
|
|
+#
|
|
+
|
|
+#
|
|
+# AT91 Feature Selections
|
|
+#
|
|
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
+CONFIG_AT91_TIMER_HZ=100
|
|
+
|
|
+#
|
|
+# Processor Type
|
|
+#
|
|
+CONFIG_CPU_32=y
|
|
+CONFIG_CPU_ARM926T=y
|
|
+CONFIG_CPU_32v5=y
|
|
+CONFIG_CPU_ABRT_EV5TJ=y
|
|
+CONFIG_CPU_CACHE_VIVT=y
|
|
+CONFIG_CPU_COPY_V4WB=y
|
|
+CONFIG_CPU_TLB_V4WBI=y
|
|
+CONFIG_CPU_CP15=y
|
|
+CONFIG_CPU_CP15_MMU=y
|
|
+
|
|
+#
|
|
+# Processor Features
|
|
+#
|
|
+CONFIG_ARM_THUMB=y
|
|
+# CONFIG_CPU_ICACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
+
|
|
+#
|
|
+# Bus support
|
|
+#
|
|
+# CONFIG_PCI_SYSCALL is not set
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+
|
|
+#
|
|
+# PCCARD (PCMCIA/CardBus) support
|
|
+#
|
|
+CONFIG_PCCARD=m
|
|
+# CONFIG_PCMCIA_DEBUG is not set
|
|
+CONFIG_PCMCIA=m
|
|
+CONFIG_PCMCIA_LOAD_CIS=y
|
|
+CONFIG_PCMCIA_IOCTL=y
|
|
+
|
|
+#
|
|
+# PC-card bridges
|
|
+#
|
|
+
|
|
+#
|
|
+# Kernel Features
|
|
+#
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_PREEMPT is not set
|
|
+# CONFIG_NO_IDLE_HZ is not set
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_AEABI is not set
|
|
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
+CONFIG_BOUNCE=y
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+# CONFIG_LEDS is not set
|
|
+CONFIG_ALIGNMENT_TRAP=y
|
|
+
|
|
+#
|
|
+# Boot options
|
|
+#
|
|
+CONFIG_ZBOOT_ROM_TEXT=0
|
|
+CONFIG_ZBOOT_ROM_BSS=0x20004000
|
|
+# CONFIG_ZBOOT_ROM is not set
|
|
+CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
|
|
+# CONFIG_XIP_KERNEL is not set
|
|
+CONFIG_KEXEC=y
|
|
+
|
|
+#
|
|
+# Floating point emulation
|
|
+#
|
|
+
|
|
+#
|
|
+# At least one emulation must be selected
|
|
+#
|
|
+CONFIG_FPE_NWFPE=y
|
|
+# CONFIG_FPE_NWFPE_XP is not set
|
|
+# CONFIG_FPE_FASTFPE is not set
|
|
+# CONFIG_VFP is not set
|
|
+
|
|
+#
|
|
+# Userspace binary formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+CONFIG_BINFMT_AOUT=y
|
|
+CONFIG_BINFMT_MISC=y
|
|
+# CONFIG_ARTHUR is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+# CONFIG_PM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+CONFIG_IP_MULTICAST=y
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+# CONFIG_IP_PNP_BOOTP is not set
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_IP_MROUTE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+CONFIG_NETWORK_SECMARK=y
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+
|
|
+#
|
|
+# QoS and/or fair queueing
|
|
+#
|
|
+# CONFIG_NET_SCHED is not set
|
|
+CONFIG_NET_SCH_FIFO=y
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+CONFIG_CFG80211=m
|
|
+CONFIG_WIRELESS_EXT=y
|
|
+CONFIG_MAC80211=m
|
|
+# CONFIG_MAC80211_DEBUGFS is not set
|
|
+# CONFIG_MAC80211_DEBUG is not set
|
|
+CONFIG_IEEE80211=m
|
|
+# CONFIG_IEEE80211_DEBUG is not set
|
|
+CONFIG_IEEE80211_CRYPT_WEP=m
|
|
+CONFIG_IEEE80211_CRYPT_CCMP=m
|
|
+CONFIG_IEEE80211_CRYPT_TKIP=m
|
|
+CONFIG_IEEE80211_SOFTMAC=m
|
|
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+CONFIG_FW_LOADER=m
|
|
+# CONFIG_DEBUG_DRIVER is not set
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+CONFIG_MTD_CONCAT=y
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+CONFIG_MTD_CMDLINE_PARTS=y
|
|
+# CONFIG_MTD_AFS_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+CONFIG_MTD_RAM=m
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+CONFIG_MTD_COMPLEX_MAPPINGS=y
|
|
+CONFIG_MTD_PLATRAM=m
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+CONFIG_MTD_DATAFLASH=y
|
|
+# CONFIG_MTD_M25P80 is not set
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+CONFIG_MTD_BLOCK2MTD=y
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+CONFIG_MTD_NAND_VERIFY_WRITE=y
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+CONFIG_MTD_NAND_AT91=y
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+# CONFIG_MTD_NAND_PLATFORM is not set
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+# CONFIG_MTD_UBI is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+CONFIG_SCSI_TGT=y
|
|
+CONFIG_SCSI_NETLINK=y
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+CONFIG_CHR_DEV_SG=y
|
|
+CONFIG_CHR_DEV_SCH=y
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+CONFIG_SCSI_MULTI_LUN=y
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+CONFIG_SCSI_LOGGING=y
|
|
+CONFIG_SCSI_SCAN_ASYNC=y
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+CONFIG_SCSI_SPI_ATTRS=m
|
|
+CONFIG_SCSI_FC_ATTRS=m
|
|
+CONFIG_SCSI_ISCSI_ATTRS=m
|
|
+CONFIG_SCSI_SAS_ATTRS=m
|
|
+CONFIG_SCSI_SAS_LIBSAS=m
|
|
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
|
|
+# CONFIG_SCSI_LOWLEVEL is not set
|
|
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+CONFIG_MARVELL_PHY=m
|
|
+CONFIG_DAVICOM_PHY=m
|
|
+CONFIG_QSEMI_PHY=m
|
|
+CONFIG_LXT_PHY=m
|
|
+CONFIG_CICADA_PHY=m
|
|
+CONFIG_VITESSE_PHY=m
|
|
+CONFIG_SMSC_PHY=m
|
|
+CONFIG_BROADCOM_PHY=m
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+CONFIG_FIXED_PHY=m
|
|
+# CONFIG_FIXED_MII_10_FDX is not set
|
|
+# CONFIG_FIXED_MII_100_FDX is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=m
|
|
+CONFIG_MACB=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_SMC91X is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET_MII is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_NET_PCMCIA is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+# CONFIG_INPUT_TSDEV is not set
|
|
+CONFIG_INPUT_EVDEV=y
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+CONFIG_INPUT_KEYBOARD=y
|
|
+CONFIG_KEYBOARD_ATKBD=y
|
|
+CONFIG_KEYBOARD_SUNKBD=m
|
|
+CONFIG_KEYBOARD_LKKBD=m
|
|
+CONFIG_KEYBOARD_XTKBD=m
|
|
+CONFIG_KEYBOARD_NEWTON=m
|
|
+CONFIG_KEYBOARD_STOWAWAY=m
|
|
+# CONFIG_KEYBOARD_GPIO is not set
|
|
+CONFIG_INPUT_MOUSE=y
|
|
+CONFIG_MOUSE_PS2=y
|
|
+CONFIG_MOUSE_PS2_ALPS=y
|
|
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
|
|
+CONFIG_MOUSE_PS2_SYNAPTICS=y
|
|
+CONFIG_MOUSE_PS2_LIFEBOOK=y
|
|
+CONFIG_MOUSE_PS2_TRACKPOINT=y
|
|
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
|
|
+CONFIG_MOUSE_SERIAL=m
|
|
+CONFIG_MOUSE_APPLETOUCH=m
|
|
+CONFIG_MOUSE_VSXXXAA=m
|
|
+# CONFIG_MOUSE_GPIO is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+# CONFIG_SERIO_SERPORT is not set
|
|
+CONFIG_SERIO_LIBPS2=y
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+CONFIG_VT_HW_CONSOLE_BINDING=y
|
|
+CONFIG_SERIAL_NONSTANDARD=y
|
|
+# CONFIG_MOXA_SMARTIO is not set
|
|
+# CONFIG_N_HDLC is not set
|
|
+# CONFIG_RISCOM8 is not set
|
|
+# CONFIG_SPECIALIX is not set
|
|
+# CONFIG_RIO is not set
|
|
+# CONFIG_STALDRV is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+# CONFIG_SERIAL_8250 is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_ATMEL=y
|
|
+CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+# CONFIG_LEGACY_PTYS is not set
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_WATCHDOG is not set
|
|
+CONFIG_HW_RANDOM=y
|
|
+# CONFIG_NVRAM is not set
|
|
+# CONFIG_R3964 is not set
|
|
+
|
|
+#
|
|
+# PCMCIA character devices
|
|
+#
|
|
+# CONFIG_SYNCLINK_CS is not set
|
|
+# CONFIG_CARDMAN_4000 is not set
|
|
+# CONFIG_CARDMAN_4040 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+CONFIG_I2C=y
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
+CONFIG_I2C_CHARDEV=y
|
|
+
|
|
+#
|
|
+# I2C Algorithms
|
|
+#
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
|
+
|
|
+#
|
|
+# I2C Hardware Bus support
|
|
+#
|
|
+# CONFIG_I2C_AT91 is not set
|
|
+# CONFIG_I2C_GPIO is not set
|
|
+# CONFIG_I2C_OCORES is not set
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
+# CONFIG_I2C_STUB is not set
|
|
+# CONFIG_I2C_TINY_USB is not set
|
|
+# CONFIG_I2C_PCA is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous I2C Chip support
|
|
+#
|
|
+# CONFIG_SENSORS_DS1337 is not set
|
|
+# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
|
+# CONFIG_SENSORS_PCA9539 is not set
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+CONFIG_SPI=y
|
|
+# CONFIG_SPI_DEBUG is not set
|
|
+CONFIG_SPI_MASTER=y
|
|
+
|
|
+#
|
|
+# SPI Master Controller Drivers
|
|
+#
|
|
+CONFIG_SPI_ATMEL=y
|
|
+# CONFIG_SPI_BITBANG is not set
|
|
+
|
|
+#
|
|
+# SPI Protocol Masters
|
|
+#
|
|
+# CONFIG_SPI_AT25 is not set
|
|
+# CONFIG_SPI_SPIDEV is not set
|
|
+# CONFIG_SPI_TLE62X0 is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_HWMON is not set
|
|
+# CONFIG_MISC_DEVICES is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+# CONFIG_FB is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+# CONFIG_SOUND is not set
|
|
+# CONFIG_HID_SUPPORT is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+CONFIG_USB_DEVICEFS=y
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_ONETOUCH is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+CONFIG_USB_LIBUSUAL=y
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+# CONFIG_USB_MON is not set
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+# CONFIG_USB_TEST is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+# CONFIG_USB_GADGET is not set
|
|
+# CONFIG_MMC is not set
|
|
+CONFIG_RTC_LIB=y
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
+
|
|
+#
|
|
+# RTC interfaces
|
|
+#
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
|
|
+CONFIG_RTC_DRV_TEST=m
|
|
+
|
|
+#
|
|
+# I2C RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
|
+
|
|
+#
|
|
+# SPI RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
|
+
|
|
+#
|
|
+# Platform RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_CMOS is not set
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
+
|
|
+#
|
|
+# on-CPU RTC drivers
|
|
+#
|
|
+CONFIG_RTC_DRV_AT91SAM9=y
|
|
+
|
|
+#
|
|
+# DMA Engine support
|
|
+#
|
|
+# CONFIG_DMA_ENGINE is not set
|
|
+
|
|
+#
|
|
+# DMA Clients
|
|
+#
|
|
+
|
|
+#
|
|
+# DMA Devices
|
|
+#
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+CONFIG_EXT2_FS_POSIX_ACL=y
|
|
+# CONFIG_EXT2_FS_SECURITY is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+CONFIG_EXT3_FS=y
|
|
+CONFIG_EXT3_FS_XATTR=y
|
|
+# CONFIG_EXT3_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT3_FS_SECURITY is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_JBD=y
|
|
+# CONFIG_JBD_DEBUG is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+# CONFIG_MINIX_FS is not set
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+CONFIG_QUOTA=y
|
|
+# CONFIG_QFMT_V1 is not set
|
|
+# CONFIG_QFMT_V2 is not set
|
|
+CONFIG_QUOTACTL=y
|
|
+CONFIG_DNOTIFY=y
|
|
+CONFIG_AUTOFS_FS=y
|
|
+CONFIG_AUTOFS4_FS=y
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+CONFIG_RAMFS=y
|
|
+CONFIG_CONFIGFS_FS=y
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+CONFIG_JFFS2_FS=y
|
|
+CONFIG_JFFS2_FS_DEBUG=0
|
|
+CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
+# CONFIG_JFFS2_SUMMARY is not set
|
|
+# CONFIG_JFFS2_FS_XATTR is not set
|
|
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
+CONFIG_JFFS2_ZLIB=y
|
|
+CONFIG_JFFS2_RTIME=y
|
|
+# CONFIG_JFFS2_RUBIN is not set
|
|
+CONFIG_CRAMFS=y
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+
|
|
+#
|
|
+# Network File Systems
|
|
+#
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+# CONFIG_NFS_V3_ACL is not set
|
|
+# CONFIG_NFS_V4 is not set
|
|
+# CONFIG_NFS_DIRECTIO is not set
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+# CONFIG_RPCSEC_GSS_KRB5 is not set
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+# CONFIG_PARTITION_ADVANCED is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+
|
|
+#
|
|
+# Native Language Support
|
|
+#
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="cp437"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+# CONFIG_NLS_CODEPAGE_936 is not set
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+CONFIG_NLS_UTF8=y
|
|
+
|
|
+#
|
|
+# Distributed Lock Manager
|
|
+#
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Profiling support
|
|
+#
|
|
+# CONFIG_PROFILING is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+CONFIG_PRINTK_TIME=y
|
|
+# CONFIG_ENABLE_MUST_CHECK is not set
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+CONFIG_UNUSED_SYMBOLS=y
|
|
+CONFIG_DEBUG_FS=y
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+CONFIG_DEBUG_KERNEL=y
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
+CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
+# CONFIG_SCHEDSTATS is not set
|
|
+# CONFIG_TIMER_STATS is not set
|
|
+# CONFIG_SLUB_DEBUG_ON is not set
|
|
+# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
+# CONFIG_RT_MUTEX_TESTER is not set
|
|
+# CONFIG_DEBUG_SPINLOCK is not set
|
|
+# CONFIG_DEBUG_MUTEXES is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
+# CONFIG_DEBUG_KOBJECT is not set
|
|
+# CONFIG_DEBUG_BUGVERBOSE is not set
|
|
+# CONFIG_DEBUG_INFO is not set
|
|
+# CONFIG_DEBUG_VM is not set
|
|
+# CONFIG_DEBUG_LIST is not set
|
|
+CONFIG_FRAME_POINTER=y
|
|
+# CONFIG_FORCED_INLINING is not set
|
|
+# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_DEBUG_USER is not set
|
|
+# CONFIG_DEBUG_ERRORS is not set
|
|
+# CONFIG_DEBUG_LL is not set
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_ABLKCIPHER=m
|
|
+CONFIG_CRYPTO_BLKCIPHER=m
|
|
+CONFIG_CRYPTO_HASH=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+CONFIG_CRYPTO_HMAC=y
|
|
+CONFIG_CRYPTO_XCBC=m
|
|
+CONFIG_CRYPTO_NULL=m
|
|
+CONFIG_CRYPTO_MD4=m
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+CONFIG_CRYPTO_SHA1=m
|
|
+CONFIG_CRYPTO_SHA256=m
|
|
+CONFIG_CRYPTO_SHA512=m
|
|
+CONFIG_CRYPTO_WP512=m
|
|
+CONFIG_CRYPTO_TGR192=m
|
|
+CONFIG_CRYPTO_GF128MUL=m
|
|
+CONFIG_CRYPTO_ECB=m
|
|
+CONFIG_CRYPTO_CBC=m
|
|
+CONFIG_CRYPTO_PCBC=m
|
|
+CONFIG_CRYPTO_LRW=m
|
|
+CONFIG_CRYPTO_CRYPTD=m
|
|
+CONFIG_CRYPTO_DES=m
|
|
+CONFIG_CRYPTO_FCRYPT=m
|
|
+CONFIG_CRYPTO_BLOWFISH=m
|
|
+CONFIG_CRYPTO_TWOFISH=m
|
|
+CONFIG_CRYPTO_TWOFISH_COMMON=m
|
|
+CONFIG_CRYPTO_SERPENT=m
|
|
+CONFIG_CRYPTO_AES=m
|
|
+CONFIG_CRYPTO_CAST5=m
|
|
+CONFIG_CRYPTO_CAST6=m
|
|
+CONFIG_CRYPTO_TEA=m
|
|
+CONFIG_CRYPTO_ARC4=m
|
|
+CONFIG_CRYPTO_KHAZAD=m
|
|
+CONFIG_CRYPTO_ANUBIS=m
|
|
+CONFIG_CRYPTO_DEFLATE=m
|
|
+CONFIG_CRYPTO_MICHAEL_MIC=m
|
|
+CONFIG_CRYPTO_CRC32C=m
|
|
+CONFIG_CRYPTO_CAMELLIA=m
|
|
+CONFIG_CRYPTO_TEST=m
|
|
+CONFIG_CRYPTO_HW=y
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+CONFIG_LIBCRC32C=m
|
|
+CONFIG_AUDIT_GENERIC=y
|
|
+CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_ZLIB_DEFLATE=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/csb337_defconfig linux-2.6/arch/arm/configs/csb337_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/csb337_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/csb337_defconfig 2008-01-09 22:19:31.000000000 +0200
|
|
@@ -1,69 +1,96 @@
|
|
#
|
|
# Automatically generated make config: don't edit
|
|
-# Linux kernel version: 2.6.15
|
|
-# Mon Jan 9 21:51:31 2006
|
|
+# Linux kernel version: 2.6.24-rc7
|
|
+# Wed Jan 9 22:19:24 2008
|
|
#
|
|
CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
+CONFIG_GENERIC_TIME=y
|
|
+CONFIG_GENERIC_CLOCKEVENTS=y
|
|
CONFIG_MMU=y
|
|
-CONFIG_UID16=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
+CONFIG_VECTORS_BASE=0xffff0000
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
#
|
|
-# Code maturity level options
|
|
+# General setup
|
|
#
|
|
CONFIG_EXPERIMENTAL=y
|
|
-CONFIG_CLEAN_COMPILE=y
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
-
|
|
-#
|
|
-# General setup
|
|
-#
|
|
CONFIG_LOCALVERSION=""
|
|
CONFIG_LOCALVERSION_AUTO=y
|
|
# CONFIG_SWAP is not set
|
|
CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
# CONFIG_POSIX_MQUEUE is not set
|
|
# CONFIG_BSD_PROCESS_ACCT is not set
|
|
-CONFIG_SYSCTL=y
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+# CONFIG_PID_NS is not set
|
|
# CONFIG_AUDIT is not set
|
|
-CONFIG_HOTPLUG=y
|
|
-CONFIG_KOBJECT_UEVENT=y
|
|
# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_CGROUPS is not set
|
|
+CONFIG_FAIR_GROUP_SCHED=y
|
|
+CONFIG_FAIR_USER_SCHED=y
|
|
+# CONFIG_FAIR_CGROUP_SCHED is not set
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+# CONFIG_RELAY is not set
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
CONFIG_INITRAMFS_SOURCE=""
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
+CONFIG_SYSCTL=y
|
|
# CONFIG_EMBEDDED is not set
|
|
+CONFIG_UID16=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
CONFIG_KALLSYMS=y
|
|
# CONFIG_KALLSYMS_ALL is not set
|
|
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
CONFIG_PRINTK=y
|
|
CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
CONFIG_BASE_FULL=y
|
|
CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
CONFIG_SHMEM=y
|
|
-CONFIG_CC_ALIGN_FUNCTIONS=0
|
|
-CONFIG_CC_ALIGN_LABELS=0
|
|
-CONFIG_CC_ALIGN_LOOPS=0
|
|
-CONFIG_CC_ALIGN_JUMPS=0
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLUB_DEBUG=y
|
|
+# CONFIG_SLAB is not set
|
|
+CONFIG_SLUB=y
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_SLABINFO=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
# CONFIG_TINY_SHMEM is not set
|
|
CONFIG_BASE_SMALL=0
|
|
-
|
|
-#
|
|
-# Loadable module support
|
|
-#
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
-CONFIG_OBSOLETE_MODPARM=y
|
|
# CONFIG_MODVERSIONS is not set
|
|
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
CONFIG_KMOD=y
|
|
-
|
|
-#
|
|
-# Block layer
|
|
-#
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
|
|
#
|
|
# IO Schedulers
|
|
@@ -81,62 +108,101 @@
|
|
#
|
|
# System Type
|
|
#
|
|
+# CONFIG_ARCH_AAEC2000 is not set
|
|
+# CONFIG_ARCH_INTEGRATOR is not set
|
|
+# CONFIG_ARCH_REALVIEW is not set
|
|
+# CONFIG_ARCH_VERSATILE is not set
|
|
+CONFIG_ARCH_AT91=y
|
|
# CONFIG_ARCH_CLPS7500 is not set
|
|
# CONFIG_ARCH_CLPS711X is not set
|
|
# CONFIG_ARCH_CO285 is not set
|
|
# CONFIG_ARCH_EBSA110 is not set
|
|
+# CONFIG_ARCH_EP93XX is not set
|
|
# CONFIG_ARCH_FOOTBRIDGE is not set
|
|
-# CONFIG_ARCH_INTEGRATOR is not set
|
|
-# CONFIG_ARCH_IOP3XX is not set
|
|
-# CONFIG_ARCH_IXP4XX is not set
|
|
+# CONFIG_ARCH_NETX is not set
|
|
+# CONFIG_ARCH_H720X is not set
|
|
+# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
+# CONFIG_ARCH_IOP32X is not set
|
|
+# CONFIG_ARCH_IOP33X is not set
|
|
+# CONFIG_ARCH_IXP23XX is not set
|
|
# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_KS8695 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_MXC is not set
|
|
+# CONFIG_ARCH_PNX4008 is not set
|
|
# CONFIG_ARCH_PXA is not set
|
|
# CONFIG_ARCH_RPC is not set
|
|
# CONFIG_ARCH_SA1100 is not set
|
|
# CONFIG_ARCH_S3C2410 is not set
|
|
# CONFIG_ARCH_SHARK is not set
|
|
# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_DAVINCI is not set
|
|
# CONFIG_ARCH_OMAP is not set
|
|
-# CONFIG_ARCH_VERSATILE is not set
|
|
-# CONFIG_ARCH_REALVIEW is not set
|
|
-# CONFIG_ARCH_IMX is not set
|
|
-# CONFIG_ARCH_H720X is not set
|
|
-# CONFIG_ARCH_AAEC2000 is not set
|
|
-CONFIG_ARCH_AT91=y
|
|
-CONFIG_ARCH_AT91RM9200=y
|
|
|
|
#
|
|
-# AT91RM9200 Implementations
|
|
+# Boot options
|
|
#
|
|
|
|
#
|
|
+# Power management
|
|
+#
|
|
+
|
|
+#
|
|
+# Atmel AT91 System-on-Chip
|
|
+#
|
|
+CONFIG_ARCH_AT91RM9200=y
|
|
+# CONFIG_ARCH_AT91SAM9260 is not set
|
|
+# CONFIG_ARCH_AT91SAM9261 is not set
|
|
+# CONFIG_ARCH_AT91SAM9263 is not set
|
|
+# CONFIG_ARCH_AT91SAM9RL is not set
|
|
+# CONFIG_ARCH_AT91X40 is not set
|
|
+CONFIG_AT91_PMC_UNIT=y
|
|
+
|
|
+#
|
|
# AT91RM9200 Board Type
|
|
#
|
|
+# CONFIG_MACH_ONEARM is not set
|
|
# CONFIG_ARCH_AT91RM9200DK is not set
|
|
# CONFIG_MACH_AT91RM9200EK is not set
|
|
CONFIG_MACH_CSB337=y
|
|
# CONFIG_MACH_CSB637 is not set
|
|
# CONFIG_MACH_CARMEVA is not set
|
|
-# CONFIG_MACH_KB9200 is not set
|
|
# CONFIG_MACH_ATEB9200 is not set
|
|
+# CONFIG_MACH_KB9200 is not set
|
|
+# CONFIG_MACH_PICOTUX2XX is not set
|
|
+# CONFIG_MACH_KAFA is not set
|
|
+# CONFIG_MACH_CHUB is not set
|
|
+# CONFIG_MACH_HOMEMATIC is not set
|
|
+# CONFIG_MACH_ECBAT91 is not set
|
|
+# CONFIG_MACH_SWEDATMS is not set
|
|
|
|
#
|
|
-# AT91RM9200 Feature Selections
|
|
+# AT91 Board Options
|
|
+#
|
|
+
|
|
+#
|
|
+# AT91 Feature Selections
|
|
#
|
|
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
+CONFIG_AT91_TIMER_HZ=128
|
|
|
|
#
|
|
# Processor Type
|
|
#
|
|
CONFIG_CPU_32=y
|
|
CONFIG_CPU_ARM920T=y
|
|
-CONFIG_CPU_32v4=y
|
|
+CONFIG_CPU_32v4T=y
|
|
CONFIG_CPU_ABRT_EV4T=y
|
|
CONFIG_CPU_CACHE_V4WT=y
|
|
CONFIG_CPU_CACHE_VIVT=y
|
|
CONFIG_CPU_COPY_V4WB=y
|
|
CONFIG_CPU_TLB_V4WBI=y
|
|
+CONFIG_CPU_CP15=y
|
|
+CONFIG_CPU_CP15_MMU=y
|
|
|
|
#
|
|
# Processor Features
|
|
@@ -145,15 +211,13 @@
|
|
# CONFIG_CPU_ICACHE_DISABLE is not set
|
|
# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
|
|
#
|
|
# Bus support
|
|
#
|
|
-CONFIG_ISA_DMA_API=y
|
|
-
|
|
-#
|
|
-# PCCARD (PCMCIA/CardBus) support
|
|
-#
|
|
+# CONFIG_PCI_SYSCALL is not set
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
CONFIG_PCCARD=y
|
|
# CONFIG_PCMCIA_DEBUG is not set
|
|
CONFIG_PCMCIA=y
|
|
@@ -168,8 +232,13 @@
|
|
#
|
|
# Kernel Features
|
|
#
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+# CONFIG_NO_HZ is not set
|
|
+# CONFIG_HIGH_RES_TIMERS is not set
|
|
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
|
# CONFIG_PREEMPT is not set
|
|
-# CONFIG_NO_IDLE_HZ is not set
|
|
+CONFIG_HZ=128
|
|
+# CONFIG_AEABI is not set
|
|
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
CONFIG_SELECT_MEMORY_MODEL=y
|
|
CONFIG_FLATMEM_MANUAL=y
|
|
@@ -178,9 +247,13 @@
|
|
CONFIG_FLATMEM=y
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
# CONFIG_SPARSEMEM_STATIC is not set
|
|
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
|
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
+CONFIG_BOUNCE=y
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
CONFIG_LEDS=y
|
|
-CONFIG_LEDS_TIMER=y
|
|
CONFIG_LEDS_CPU=y
|
|
CONFIG_ALIGNMENT_TRAP=y
|
|
|
|
@@ -191,6 +264,7 @@
|
|
CONFIG_ZBOOT_ROM_BSS=0x0
|
|
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
|
|
# CONFIG_XIP_KERNEL is not set
|
|
+# CONFIG_KEXEC is not set
|
|
|
|
#
|
|
# Floating point emulation
|
|
@@ -215,6 +289,7 @@
|
|
# Power management options
|
|
#
|
|
# CONFIG_PM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
|
|
#
|
|
# Networking
|
|
@@ -227,6 +302,10 @@
|
|
CONFIG_PACKET=y
|
|
# CONFIG_PACKET_MMAP is not set
|
|
CONFIG_UNIX=y
|
|
+CONFIG_XFRM=y
|
|
+# CONFIG_XFRM_USER is not set
|
|
+# CONFIG_XFRM_SUB_POLICY is not set
|
|
+# CONFIG_XFRM_MIGRATE is not set
|
|
# CONFIG_NET_KEY is not set
|
|
CONFIG_INET=y
|
|
# CONFIG_IP_MULTICAST is not set
|
|
@@ -243,23 +322,26 @@
|
|
# CONFIG_INET_AH is not set
|
|
# CONFIG_INET_ESP is not set
|
|
# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
# CONFIG_INET_TUNNEL is not set
|
|
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
|
+CONFIG_INET_XFRM_MODE_TUNNEL=y
|
|
+CONFIG_INET_XFRM_MODE_BEET=y
|
|
+# CONFIG_INET_LRO is not set
|
|
CONFIG_INET_DIAG=y
|
|
CONFIG_INET_TCP_DIAG=y
|
|
# CONFIG_TCP_CONG_ADVANCED is not set
|
|
-CONFIG_TCP_CONG_BIC=y
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
# CONFIG_NETFILTER is not set
|
|
-
|
|
-#
|
|
-# DCCP Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_IP_DCCP is not set
|
|
-
|
|
-#
|
|
-# SCTP Configuration (EXPERIMENTAL)
|
|
-#
|
|
# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
# CONFIG_ATM is not set
|
|
# CONFIG_BRIDGE is not set
|
|
# CONFIG_VLAN_8021Q is not set
|
|
@@ -269,13 +351,8 @@
|
|
# CONFIG_ATALK is not set
|
|
# CONFIG_X25 is not set
|
|
# CONFIG_LAPB is not set
|
|
-# CONFIG_NET_DIVERT is not set
|
|
# CONFIG_ECONET is not set
|
|
# CONFIG_WAN_ROUTER is not set
|
|
-
|
|
-#
|
|
-# QoS and/or fair queueing
|
|
-#
|
|
# CONFIG_NET_SCHED is not set
|
|
|
|
#
|
|
@@ -285,7 +362,17 @@
|
|
# CONFIG_HAMRADIO is not set
|
|
# CONFIG_IRDA is not set
|
|
# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
|
|
#
|
|
# Device Drivers
|
|
@@ -294,19 +381,14 @@
|
|
#
|
|
# Generic Driver Options
|
|
#
|
|
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
CONFIG_STANDALONE=y
|
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
CONFIG_FW_LOADER=y
|
|
# CONFIG_DEBUG_DRIVER is not set
|
|
-
|
|
-#
|
|
-# Connector - unified userspace <-> kernelspace linker
|
|
-#
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
# CONFIG_CONNECTOR is not set
|
|
-
|
|
-#
|
|
-# Memory Technology Devices (MTD)
|
|
-#
|
|
CONFIG_MTD=y
|
|
# CONFIG_MTD_DEBUG is not set
|
|
# CONFIG_MTD_CONCAT is not set
|
|
@@ -319,11 +401,14 @@
|
|
# User Modules And Translation Layers
|
|
#
|
|
CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
CONFIG_MTD_BLOCK=y
|
|
# CONFIG_FTL is not set
|
|
# CONFIG_NFTL is not set
|
|
# CONFIG_INFTL is not set
|
|
# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+# CONFIG_MTD_OOPS is not set
|
|
|
|
#
|
|
# RAM/ROM/Flash chip drivers
|
|
@@ -349,15 +434,14 @@
|
|
# CONFIG_MTD_RAM is not set
|
|
# CONFIG_MTD_ROM is not set
|
|
# CONFIG_MTD_ABSENT is not set
|
|
-# CONFIG_MTD_XIP is not set
|
|
|
|
#
|
|
# Mapping drivers for chip access
|
|
#
|
|
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
CONFIG_MTD_PHYSMAP=y
|
|
-CONFIG_MTD_PHYSMAP_START=0
|
|
-CONFIG_MTD_PHYSMAP_LEN=0
|
|
+CONFIG_MTD_PHYSMAP_START=0x0
|
|
+CONFIG_MTD_PHYSMAP_LEN=0x0
|
|
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
|
|
# CONFIG_MTD_ARM_INTEGRATOR is not set
|
|
# CONFIG_MTD_PLATRAM is not set
|
|
@@ -368,7 +452,6 @@
|
|
# CONFIG_MTD_SLRAM is not set
|
|
# CONFIG_MTD_PHRAM is not set
|
|
# CONFIG_MTD_MTDRAM is not set
|
|
-# CONFIG_MTD_BLKMTD is not set
|
|
# CONFIG_MTD_BLOCK2MTD is not set
|
|
|
|
#
|
|
@@ -378,29 +461,15 @@
|
|
# CONFIG_MTD_DOC2001 is not set
|
|
# CONFIG_MTD_DOC2001PLUS is not set
|
|
# CONFIG_MTD_AT91_DATAFLASH is not set
|
|
-
|
|
-#
|
|
-# NAND Flash Device Drivers
|
|
-#
|
|
# CONFIG_MTD_NAND is not set
|
|
-
|
|
-#
|
|
-# OneNAND Flash Device Drivers
|
|
-#
|
|
# CONFIG_MTD_ONENAND is not set
|
|
|
|
#
|
|
-# Parallel port support
|
|
+# UBI - Unsorted block images
|
|
#
|
|
+# CONFIG_MTD_UBI is not set
|
|
# CONFIG_PARPORT is not set
|
|
-
|
|
-#
|
|
-# Plug and Play support
|
|
-#
|
|
-
|
|
-#
|
|
-# Block devices
|
|
-#
|
|
+CONFIG_BLK_DEV=y
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
CONFIG_BLK_DEV_LOOP=y
|
|
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
@@ -409,13 +478,12 @@
|
|
CONFIG_BLK_DEV_RAM=y
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
CONFIG_BLK_DEV_RAM_SIZE=8192
|
|
-CONFIG_BLK_DEV_INITRD=y
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
# CONFIG_ATA_OVER_ETH is not set
|
|
-
|
|
-#
|
|
-# ATA/ATAPI/MFM/RLL support
|
|
-#
|
|
+CONFIG_MISC_DEVICES=y
|
|
+# CONFIG_EEPROM_93CX6 is not set
|
|
+CONFIG_ATMEL_SSC=y
|
|
# CONFIG_IDE is not set
|
|
|
|
#
|
|
@@ -423,6 +491,9 @@
|
|
#
|
|
# CONFIG_RAID_ATTRS is not set
|
|
CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
CONFIG_SCSI_PROC_FS=y
|
|
|
|
#
|
|
@@ -441,97 +512,61 @@
|
|
# CONFIG_SCSI_MULTI_LUN is not set
|
|
# CONFIG_SCSI_CONSTANTS is not set
|
|
# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
|
|
#
|
|
-# SCSI Transport Attributes
|
|
+# SCSI Transports
|
|
#
|
|
# CONFIG_SCSI_SPI_ATTRS is not set
|
|
# CONFIG_SCSI_FC_ATTRS is not set
|
|
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
-# CONFIG_SCSI_SAS_ATTRS is not set
|
|
-
|
|
-#
|
|
-# SCSI low-level drivers
|
|
-#
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_SRP_ATTRS is not set
|
|
+CONFIG_SCSI_LOWLEVEL=y
|
|
# CONFIG_ISCSI_TCP is not set
|
|
-# CONFIG_SCSI_SATA is not set
|
|
# CONFIG_SCSI_DEBUG is not set
|
|
-
|
|
-#
|
|
-# PCMCIA SCSI adapter support
|
|
-#
|
|
-# CONFIG_PCMCIA_AHA152X is not set
|
|
-# CONFIG_PCMCIA_FDOMAIN is not set
|
|
-# CONFIG_PCMCIA_NINJA_SCSI is not set
|
|
-# CONFIG_PCMCIA_QLOGIC is not set
|
|
-# CONFIG_PCMCIA_SYM53C500 is not set
|
|
-
|
|
-#
|
|
-# Multi-device support (RAID and LVM)
|
|
-#
|
|
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
|
|
+# CONFIG_ATA is not set
|
|
# CONFIG_MD is not set
|
|
-
|
|
-#
|
|
-# Fusion MPT device support
|
|
-#
|
|
-# CONFIG_FUSION is not set
|
|
-
|
|
-#
|
|
-# IEEE 1394 (FireWire) support
|
|
-#
|
|
-
|
|
-#
|
|
-# I2O device support
|
|
-#
|
|
-
|
|
-#
|
|
-# Network device support
|
|
-#
|
|
CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
# CONFIG_DUMMY is not set
|
|
# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
# CONFIG_EQUALIZER is not set
|
|
# CONFIG_TUN is not set
|
|
-
|
|
-#
|
|
-# PHY device support
|
|
-#
|
|
+# CONFIG_VETH is not set
|
|
# CONFIG_PHYLIB is not set
|
|
-
|
|
-#
|
|
-# Ethernet (10 or 100Mbit)
|
|
-#
|
|
CONFIG_NET_ETHERNET=y
|
|
CONFIG_MII=y
|
|
CONFIG_ARM_AT91_ETHER=y
|
|
+# CONFIG_AX88796 is not set
|
|
# CONFIG_SMC91X is not set
|
|
# CONFIG_DM9000 is not set
|
|
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
|
|
+# CONFIG_IBM_NEW_EMAC_TAH is not set
|
|
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
|
|
+# CONFIG_B44 is not set
|
|
+CONFIG_NETDEV_1000=y
|
|
+CONFIG_NETDEV_10000=y
|
|
|
|
#
|
|
-# Ethernet (1000 Mbit)
|
|
-#
|
|
-
|
|
-#
|
|
-# Ethernet (10000 Mbit)
|
|
-#
|
|
-
|
|
-#
|
|
-# Token Ring devices
|
|
+# Wireless LAN
|
|
#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
|
|
#
|
|
-# Wireless LAN (non-hamradio)
|
|
-#
|
|
-# CONFIG_NET_RADIO is not set
|
|
-
|
|
-#
|
|
-# PCMCIA network device support
|
|
+# USB Network Adapters
|
|
#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
# CONFIG_NET_PCMCIA is not set
|
|
-
|
|
-#
|
|
-# Wan interfaces
|
|
-#
|
|
# CONFIG_WAN is not set
|
|
# CONFIG_PPP is not set
|
|
# CONFIG_SLIP is not set
|
|
@@ -539,26 +574,23 @@
|
|
# CONFIG_NETCONSOLE is not set
|
|
# CONFIG_NETPOLL is not set
|
|
# CONFIG_NET_POLL_CONTROLLER is not set
|
|
-
|
|
-#
|
|
-# ISDN subsystem
|
|
-#
|
|
# CONFIG_ISDN is not set
|
|
|
|
#
|
|
# Input device support
|
|
#
|
|
CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
|
|
#
|
|
# Userland interfaces
|
|
#
|
|
CONFIG_INPUT_MOUSEDEV=y
|
|
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
|
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
# CONFIG_INPUT_JOYDEV is not set
|
|
-# CONFIG_INPUT_TSDEV is not set
|
|
# CONFIG_INPUT_EVDEV is not set
|
|
# CONFIG_INPUT_EVBUG is not set
|
|
|
|
@@ -568,6 +600,7 @@
|
|
# CONFIG_INPUT_KEYBOARD is not set
|
|
# CONFIG_INPUT_MOUSE is not set
|
|
# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
# CONFIG_INPUT_MISC is not set
|
|
|
|
@@ -583,6 +616,7 @@
|
|
CONFIG_VT=y
|
|
CONFIG_VT_CONSOLE=y
|
|
CONFIG_HW_CONSOLE=y
|
|
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
|
# CONFIG_SERIAL_NONSTANDARD is not set
|
|
|
|
#
|
|
@@ -601,152 +635,114 @@
|
|
CONFIG_UNIX98_PTYS=y
|
|
CONFIG_LEGACY_PTYS=y
|
|
CONFIG_LEGACY_PTY_COUNT=256
|
|
-
|
|
-#
|
|
-# IPMI
|
|
-#
|
|
# CONFIG_IPMI_HANDLER is not set
|
|
-
|
|
-#
|
|
-# Watchdog Cards
|
|
-#
|
|
-CONFIG_WATCHDOG=y
|
|
-CONFIG_WATCHDOG_NOWAYOUT=y
|
|
-
|
|
-#
|
|
-# Watchdog Device Drivers
|
|
-#
|
|
-# CONFIG_SOFT_WATCHDOG is not set
|
|
-CONFIG_AT91RM9200_WATCHDOG=y
|
|
-
|
|
-#
|
|
-# USB-based Watchdog Cards
|
|
-#
|
|
-# CONFIG_USBPCWATCHDOG is not set
|
|
# CONFIG_HW_RANDOM is not set
|
|
# CONFIG_NVRAM is not set
|
|
-# CONFIG_DTLK is not set
|
|
# CONFIG_R3964 is not set
|
|
|
|
#
|
|
-# Ftape, the floppy tape device driver
|
|
-#
|
|
-
|
|
-#
|
|
# PCMCIA character devices
|
|
#
|
|
# CONFIG_SYNCLINK_CS is not set
|
|
# CONFIG_CARDMAN_4000 is not set
|
|
# CONFIG_CARDMAN_4040 is not set
|
|
# CONFIG_RAW_DRIVER is not set
|
|
-
|
|
-#
|
|
-# TPM devices
|
|
-#
|
|
# CONFIG_TCG_TPM is not set
|
|
-# CONFIG_TELCLOCK is not set
|
|
CONFIG_AT91_SPI=y
|
|
CONFIG_AT91_SPIDEV=y
|
|
-
|
|
-#
|
|
-# I2C support
|
|
-#
|
|
CONFIG_I2C=y
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
CONFIG_I2C_CHARDEV=y
|
|
|
|
#
|
|
# I2C Algorithms
|
|
#
|
|
-# CONFIG_I2C_ALGOBIT is not set
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
# CONFIG_I2C_ALGOPCF is not set
|
|
# CONFIG_I2C_ALGOPCA is not set
|
|
|
|
#
|
|
# I2C Hardware Bus support
|
|
#
|
|
-CONFIG_I2C_AT91=y
|
|
+CONFIG_I2C_GPIO=y
|
|
+# CONFIG_I2C_OCORES is not set
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_TAOS_EVM is not set
|
|
# CONFIG_I2C_STUB is not set
|
|
-# CONFIG_I2C_PCA_ISA is not set
|
|
+# CONFIG_I2C_TINY_USB is not set
|
|
+# CONFIG_I2C_PCA is not set
|
|
|
|
#
|
|
# Miscellaneous I2C Chip support
|
|
#
|
|
# CONFIG_SENSORS_DS1337 is not set
|
|
# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_DS1682 is not set
|
|
# CONFIG_SENSORS_EEPROM is not set
|
|
# CONFIG_SENSORS_PCF8574 is not set
|
|
# CONFIG_SENSORS_PCA9539 is not set
|
|
# CONFIG_SENSORS_PCF8591 is not set
|
|
-# CONFIG_SENSORS_RTC8564 is not set
|
|
# CONFIG_SENSORS_MAX6875 is not set
|
|
-# CONFIG_RTC_X1205_I2C is not set
|
|
+# CONFIG_SENSORS_TSL2550 is not set
|
|
# CONFIG_I2C_DEBUG_CORE is not set
|
|
# CONFIG_I2C_DEBUG_ALGO is not set
|
|
# CONFIG_I2C_DEBUG_BUS is not set
|
|
# CONFIG_I2C_DEBUG_CHIP is not set
|
|
|
|
#
|
|
-# Hardware Monitoring support
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_POWER_SUPPLY is not set
|
|
+# CONFIG_HWMON is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+CONFIG_WATCHDOG_NOWAYOUT=y
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
#
|
|
-CONFIG_HWMON=y
|
|
-# CONFIG_HWMON_VID is not set
|
|
-# CONFIG_SENSORS_ADM1021 is not set
|
|
-# CONFIG_SENSORS_ADM1025 is not set
|
|
-# CONFIG_SENSORS_ADM1026 is not set
|
|
-# CONFIG_SENSORS_ADM1031 is not set
|
|
-# CONFIG_SENSORS_ADM9240 is not set
|
|
-# CONFIG_SENSORS_ASB100 is not set
|
|
-# CONFIG_SENSORS_ATXP1 is not set
|
|
-# CONFIG_SENSORS_DS1621 is not set
|
|
-# CONFIG_SENSORS_FSCHER is not set
|
|
-# CONFIG_SENSORS_FSCPOS is not set
|
|
-# CONFIG_SENSORS_GL518SM is not set
|
|
-# CONFIG_SENSORS_GL520SM is not set
|
|
-# CONFIG_SENSORS_IT87 is not set
|
|
-# CONFIG_SENSORS_LM63 is not set
|
|
-# CONFIG_SENSORS_LM75 is not set
|
|
-# CONFIG_SENSORS_LM77 is not set
|
|
-# CONFIG_SENSORS_LM78 is not set
|
|
-# CONFIG_SENSORS_LM80 is not set
|
|
-# CONFIG_SENSORS_LM83 is not set
|
|
-# CONFIG_SENSORS_LM85 is not set
|
|
-# CONFIG_SENSORS_LM87 is not set
|
|
-# CONFIG_SENSORS_LM90 is not set
|
|
-# CONFIG_SENSORS_LM92 is not set
|
|
-# CONFIG_SENSORS_MAX1619 is not set
|
|
-# CONFIG_SENSORS_PC87360 is not set
|
|
-# CONFIG_SENSORS_SMSC47M1 is not set
|
|
-# CONFIG_SENSORS_SMSC47B397 is not set
|
|
-# CONFIG_SENSORS_W83781D is not set
|
|
-# CONFIG_SENSORS_W83792D is not set
|
|
-# CONFIG_SENSORS_W83L785TS is not set
|
|
-# CONFIG_SENSORS_W83627HF is not set
|
|
-# CONFIG_SENSORS_W83627EHF is not set
|
|
-# CONFIG_HWMON_DEBUG_CHIP is not set
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT91RM9200_WATCHDOG=y
|
|
|
|
#
|
|
-# Misc devices
|
|
+# USB-based Watchdog Cards
|
|
#
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
|
|
#
|
|
-# Multimedia Capabilities Port drivers
|
|
+# Sonics Silicon Backplane
|
|
#
|
|
+CONFIG_SSB_POSSIBLE=y
|
|
+# CONFIG_SSB is not set
|
|
|
|
#
|
|
-# Multimedia devices
|
|
+# Multifunction device drivers
|
|
#
|
|
-# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_MFD_SM501 is not set
|
|
|
|
#
|
|
-# Digital Video Broadcasting Devices
|
|
+# Multimedia devices
|
|
#
|
|
-# CONFIG_DVB is not set
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+CONFIG_DAB=y
|
|
+# CONFIG_USB_DABUSB is not set
|
|
|
|
#
|
|
# Graphics support
|
|
#
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
# CONFIG_FB is not set
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
|
|
#
|
|
# Console display driver support
|
|
@@ -758,12 +754,25 @@
|
|
# Sound
|
|
#
|
|
# CONFIG_SOUND is not set
|
|
+CONFIG_HID_SUPPORT=y
|
|
+CONFIG_HID=y
|
|
+CONFIG_HID_DEBUG=y
|
|
+# CONFIG_HIDRAW is not set
|
|
|
|
#
|
|
-# USB support
|
|
+# USB Input Devices
|
|
#
|
|
+# CONFIG_USB_HID is not set
|
|
+
|
|
+#
|
|
+# USB HID Boot Protocol drivers
|
|
+#
|
|
+# CONFIG_USB_KBD is not set
|
|
+# CONFIG_USB_MOUSE is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
CONFIG_USB_ARCH_HAS_HCD=y
|
|
CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
CONFIG_USB=y
|
|
CONFIG_USB_DEBUG=y
|
|
|
|
@@ -771,7 +780,7 @@
|
|
# Miscellaneous USB options
|
|
#
|
|
CONFIG_USB_DEVICEFS=y
|
|
-# CONFIG_USB_BANDWIDTH is not set
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
# CONFIG_USB_OTG is not set
|
|
|
|
@@ -780,9 +789,11 @@
|
|
#
|
|
# CONFIG_USB_ISP116X_HCD is not set
|
|
CONFIG_USB_OHCI_HCD=y
|
|
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
|
|
#
|
|
# USB Device Class drivers
|
|
@@ -801,59 +812,21 @@
|
|
# CONFIG_USB_STORAGE_DEBUG is not set
|
|
# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_ISD200 is not set
|
|
# CONFIG_USB_STORAGE_DPCM is not set
|
|
# CONFIG_USB_STORAGE_USBAT is not set
|
|
# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
-
|
|
-#
|
|
-# USB Input Devices
|
|
-#
|
|
-# CONFIG_USB_HID is not set
|
|
-
|
|
-#
|
|
-# USB HID Boot Protocol drivers
|
|
-#
|
|
-# CONFIG_USB_KBD is not set
|
|
-# CONFIG_USB_MOUSE is not set
|
|
-# CONFIG_USB_AIPTEK is not set
|
|
-# CONFIG_USB_WACOM is not set
|
|
-# CONFIG_USB_ACECAD is not set
|
|
-# CONFIG_USB_KBTAB is not set
|
|
-# CONFIG_USB_POWERMATE is not set
|
|
-# CONFIG_USB_MTOUCH is not set
|
|
-# CONFIG_USB_ITMTOUCH is not set
|
|
-# CONFIG_USB_EGALAX is not set
|
|
-# CONFIG_USB_YEALINK is not set
|
|
-# CONFIG_USB_XPAD is not set
|
|
-# CONFIG_USB_ATI_REMOTE is not set
|
|
-# CONFIG_USB_KEYSPAN_REMOTE is not set
|
|
-# CONFIG_USB_APPLETOUCH is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
|
|
#
|
|
# USB Imaging devices
|
|
#
|
|
# CONFIG_USB_MDC800 is not set
|
|
# CONFIG_USB_MICROTEK is not set
|
|
-
|
|
-#
|
|
-# USB Multimedia devices
|
|
-#
|
|
-# CONFIG_USB_DABUSB is not set
|
|
-
|
|
-#
|
|
-# Video4Linux support is needed for USB Multimedia device support
|
|
-#
|
|
-
|
|
-#
|
|
-# USB Network Adapters
|
|
-#
|
|
-# CONFIG_USB_CATC is not set
|
|
-# CONFIG_USB_KAWETH is not set
|
|
-# CONFIG_USB_PEGASUS is not set
|
|
-# CONFIG_USB_RTL8150 is not set
|
|
-# CONFIG_USB_USBNET is not set
|
|
CONFIG_USB_MON=y
|
|
|
|
#
|
|
@@ -866,15 +839,18 @@
|
|
CONFIG_USB_SERIAL=y
|
|
CONFIG_USB_SERIAL_CONSOLE=y
|
|
CONFIG_USB_SERIAL_GENERIC=y
|
|
+# CONFIG_USB_SERIAL_AIRCABLE is not set
|
|
# CONFIG_USB_SERIAL_AIRPRIME is not set
|
|
-# CONFIG_USB_SERIAL_ANYDATA is not set
|
|
+# CONFIG_USB_SERIAL_ARK3116 is not set
|
|
# CONFIG_USB_SERIAL_BELKIN is not set
|
|
+# CONFIG_USB_SERIAL_CH341 is not set
|
|
# CONFIG_USB_SERIAL_WHITEHEAT is not set
|
|
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
|
|
# CONFIG_USB_SERIAL_CP2101 is not set
|
|
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
|
|
# CONFIG_USB_SERIAL_EMPEG is not set
|
|
CONFIG_USB_SERIAL_FTDI_SIO=y
|
|
+# CONFIG_USB_SERIAL_FUNSOFT is not set
|
|
# CONFIG_USB_SERIAL_VISOR is not set
|
|
# CONFIG_USB_SERIAL_IPAQ is not set
|
|
# CONFIG_USB_SERIAL_IR is not set
|
|
@@ -899,14 +875,20 @@
|
|
# CONFIG_USB_SERIAL_KLSI is not set
|
|
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
|
|
CONFIG_USB_SERIAL_MCT_U232=y
|
|
+# CONFIG_USB_SERIAL_MOS7720 is not set
|
|
+# CONFIG_USB_SERIAL_MOS7840 is not set
|
|
+# CONFIG_USB_SERIAL_NAVMAN is not set
|
|
# CONFIG_USB_SERIAL_PL2303 is not set
|
|
+# CONFIG_USB_SERIAL_OTI6858 is not set
|
|
# CONFIG_USB_SERIAL_HP4X is not set
|
|
# CONFIG_USB_SERIAL_SAFE is not set
|
|
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
|
|
# CONFIG_USB_SERIAL_TI is not set
|
|
# CONFIG_USB_SERIAL_CYBERJACK is not set
|
|
# CONFIG_USB_SERIAL_XIRCOM is not set
|
|
# CONFIG_USB_SERIAL_OPTION is not set
|
|
# CONFIG_USB_SERIAL_OMNINET is not set
|
|
+# CONFIG_USB_SERIAL_DEBUG is not set
|
|
CONFIG_USB_EZUSB=y
|
|
|
|
#
|
|
@@ -914,16 +896,22 @@
|
|
#
|
|
# CONFIG_USB_EMI62 is not set
|
|
# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
# CONFIG_USB_AUERSWALD is not set
|
|
# CONFIG_USB_RIO500 is not set
|
|
# CONFIG_USB_LEGOTOWER is not set
|
|
# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
# CONFIG_USB_CYTHERM is not set
|
|
-# CONFIG_USB_PHIDGETKIT is not set
|
|
-# CONFIG_USB_PHIDGETSERVO is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
# CONFIG_USB_TEST is not set
|
|
|
|
#
|
|
@@ -934,13 +922,19 @@
|
|
# USB Gadget Support
|
|
#
|
|
CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG is not set
|
|
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
# CONFIG_USB_GADGET_NET2280 is not set
|
|
# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
# CONFIG_USB_GADGET_GOKU is not set
|
|
# CONFIG_USB_GADGET_LH7A40X is not set
|
|
# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
CONFIG_USB_GADGET_AT91=y
|
|
CONFIG_USB_AT91=y
|
|
# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
@@ -950,22 +944,28 @@
|
|
# CONFIG_USB_GADGETFS is not set
|
|
# CONFIG_USB_FILE_STORAGE is not set
|
|
# CONFIG_USB_G_SERIAL is not set
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
|
|
#
|
|
-# MMC/SD Card support
|
|
+# MMC/SD Card Drivers
|
|
#
|
|
-CONFIG_MMC=y
|
|
-# CONFIG_MMC_DEBUG is not set
|
|
CONFIG_MMC_BLOCK=y
|
|
-CONFIG_MMC_AT91RM9200=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+# CONFIG_SDIO_UART is not set
|
|
|
|
#
|
|
-# Real Time Clock
|
|
+# MMC/SD Host Controller Drivers
|
|
#
|
|
+# CONFIG_MMC_AT91 is not set
|
|
+# CONFIG_NEW_LEDS is not set
|
|
CONFIG_RTC_LIB=y
|
|
CONFIG_RTC_CLASS=y
|
|
CONFIG_RTC_HCTOSYS=y
|
|
CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
|
|
#
|
|
# RTC interfaces
|
|
@@ -974,39 +974,60 @@
|
|
CONFIG_RTC_INTF_PROC=y
|
|
CONFIG_RTC_INTF_DEV=y
|
|
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
|
|
#
|
|
-# RTC drivers
|
|
+# I2C RTC drivers
|
|
#
|
|
-# CONFIG_RTC_DRV_X1205 is not set
|
|
CONFIG_RTC_DRV_DS1307=y
|
|
-# CONFIG_RTC_DRV_DS1553 is not set
|
|
-# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_DS1374 is not set
|
|
# CONFIG_RTC_DRV_DS1672 is not set
|
|
-# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
# CONFIG_RTC_DRV_PCF8563 is not set
|
|
# CONFIG_RTC_DRV_PCF8583 is not set
|
|
-# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_M41T80 is not set
|
|
+
|
|
+#
|
|
+# SPI RTC drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Platform RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_CMOS is not set
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
# CONFIG_RTC_DRV_M48T86 is not set
|
|
-CONFIG_RTC_DRV_AT91RM9200=y
|
|
-# CONFIG_RTC_DRV_TEST is not set
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
# CONFIG_RTC_DRV_V3020 is not set
|
|
|
|
#
|
|
+# on-CPU RTC drivers
|
|
+#
|
|
+CONFIG_RTC_DRV_AT91RM9200=y
|
|
+
|
|
+#
|
|
# File systems
|
|
#
|
|
CONFIG_EXT2_FS=y
|
|
# CONFIG_EXT2_FS_XATTR is not set
|
|
# CONFIG_EXT2_FS_XIP is not set
|
|
# CONFIG_EXT3_FS is not set
|
|
-# CONFIG_JBD is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
# CONFIG_REISERFS_FS is not set
|
|
# CONFIG_JFS_FS is not set
|
|
# CONFIG_FS_POSIX_ACL is not set
|
|
# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
# CONFIG_MINIX_FS is not set
|
|
# CONFIG_ROMFS_FS is not set
|
|
CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
# CONFIG_QUOTA is not set
|
|
CONFIG_DNOTIFY=y
|
|
# CONFIG_AUTOFS_FS is not set
|
|
@@ -1030,11 +1051,12 @@
|
|
# Pseudo filesystems
|
|
#
|
|
CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
CONFIG_SYSFS=y
|
|
CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
-CONFIG_RAMFS=y
|
|
-# CONFIG_RELAYFS_FS is not set
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
|
|
#
|
|
# Miscellaneous filesystems
|
|
@@ -1046,7 +1068,6 @@
|
|
# CONFIG_BEFS_FS is not set
|
|
# CONFIG_BFS_FS is not set
|
|
# CONFIG_EFS_FS is not set
|
|
-# CONFIG_JFFS_FS is not set
|
|
# CONFIG_JFFS2_FS is not set
|
|
CONFIG_CRAMFS=y
|
|
# CONFIG_VXFS_FS is not set
|
|
@@ -1054,10 +1075,7 @@
|
|
# CONFIG_QNX4FS_FS is not set
|
|
# CONFIG_SYSV_FS is not set
|
|
# CONFIG_UFS_FS is not set
|
|
-
|
|
-#
|
|
-# Network File Systems
|
|
-#
|
|
+CONFIG_NETWORK_FILESYSTEMS=y
|
|
CONFIG_NFS_FS=y
|
|
CONFIG_NFS_V3=y
|
|
# CONFIG_NFS_V3_ACL is not set
|
|
@@ -1070,6 +1088,7 @@
|
|
CONFIG_NFS_COMMON=y
|
|
CONFIG_SUNRPC=y
|
|
CONFIG_SUNRPC_GSS=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
CONFIG_RPCSEC_GSS_KRB5=y
|
|
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
# CONFIG_SMB_FS is not set
|
|
@@ -1077,43 +1096,56 @@
|
|
# CONFIG_NCP_FS is not set
|
|
# CONFIG_CODA_FS is not set
|
|
# CONFIG_AFS_FS is not set
|
|
-# CONFIG_9P_FS is not set
|
|
|
|
#
|
|
# Partition Types
|
|
#
|
|
# CONFIG_PARTITION_ADVANCED is not set
|
|
CONFIG_MSDOS_PARTITION=y
|
|
-
|
|
-#
|
|
-# Native Language Support
|
|
-#
|
|
# CONFIG_NLS is not set
|
|
-
|
|
-#
|
|
-# Profiling support
|
|
-#
|
|
+# CONFIG_DLM is not set
|
|
+CONFIG_INSTRUMENTATION=y
|
|
# CONFIG_PROFILING is not set
|
|
+# CONFIG_MARKERS is not set
|
|
|
|
#
|
|
# Kernel hacking
|
|
#
|
|
# CONFIG_PRINTK_TIME is not set
|
|
-CONFIG_DEBUG_KERNEL=y
|
|
+CONFIG_ENABLE_WARN_DEPRECATED=y
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
# CONFIG_MAGIC_SYSRQ is not set
|
|
-CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+CONFIG_DEBUG_KERNEL=y
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
# CONFIG_SCHEDSTATS is not set
|
|
-# CONFIG_DEBUG_SLAB is not set
|
|
+# CONFIG_TIMER_STATS is not set
|
|
+# CONFIG_SLUB_DEBUG_ON is not set
|
|
+# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
+# CONFIG_RT_MUTEX_TESTER is not set
|
|
# CONFIG_DEBUG_SPINLOCK is not set
|
|
+# CONFIG_DEBUG_MUTEXES is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
# CONFIG_DEBUG_KOBJECT is not set
|
|
CONFIG_DEBUG_BUGVERBOSE=y
|
|
# CONFIG_DEBUG_INFO is not set
|
|
-# CONFIG_DEBUG_FS is not set
|
|
# CONFIG_DEBUG_VM is not set
|
|
+# CONFIG_DEBUG_LIST is not set
|
|
+# CONFIG_DEBUG_SG is not set
|
|
CONFIG_FRAME_POINTER=y
|
|
+CONFIG_FORCED_INLINING=y
|
|
+# CONFIG_BOOT_PRINTK_DELAY is not set
|
|
# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_SAMPLES is not set
|
|
CONFIG_DEBUG_USER=y
|
|
# CONFIG_DEBUG_ERRORS is not set
|
|
CONFIG_DEBUG_LL=y
|
|
@@ -1124,12 +1156,13 @@
|
|
#
|
|
# CONFIG_KEYS is not set
|
|
# CONFIG_SECURITY is not set
|
|
-
|
|
-#
|
|
-# Cryptographic options
|
|
-#
|
|
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
|
CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
# CONFIG_CRYPTO_NULL is not set
|
|
# CONFIG_CRYPTO_MD4 is not set
|
|
CONFIG_CRYPTO_MD5=y
|
|
@@ -1138,7 +1171,15 @@
|
|
# CONFIG_CRYPTO_SHA512 is not set
|
|
# CONFIG_CRYPTO_WP512 is not set
|
|
# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+# CONFIG_CRYPTO_PCBC is not set
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_XTS is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
# CONFIG_CRYPTO_BLOWFISH is not set
|
|
# CONFIG_CRYPTO_TWOFISH is not set
|
|
# CONFIG_CRYPTO_SERPENT is not set
|
|
@@ -1149,20 +1190,27 @@
|
|
# CONFIG_CRYPTO_ARC4 is not set
|
|
# CONFIG_CRYPTO_KHAZAD is not set
|
|
# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_SEED is not set
|
|
# CONFIG_CRYPTO_DEFLATE is not set
|
|
# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
# CONFIG_CRYPTO_TEST is not set
|
|
-
|
|
-#
|
|
-# Hardware crypto devices
|
|
-#
|
|
+# CONFIG_CRYPTO_AUTHENC is not set
|
|
+CONFIG_CRYPTO_HW=y
|
|
|
|
#
|
|
# Library routines
|
|
#
|
|
+CONFIG_BITREVERSE=y
|
|
# CONFIG_CRC_CCITT is not set
|
|
# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
# CONFIG_LIBCRC32C is not set
|
|
CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/csb637_defconfig linux-2.6/arch/arm/configs/csb637_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/csb637_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/csb637_defconfig 2007-12-31 10:43:35.000000000 +0200
|
|
@@ -658,14 +658,14 @@
|
|
#
|
|
# I2C Algorithms
|
|
#
|
|
-# CONFIG_I2C_ALGOBIT is not set
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
# CONFIG_I2C_ALGOPCF is not set
|
|
# CONFIG_I2C_ALGOPCA is not set
|
|
|
|
#
|
|
# I2C Hardware Bus support
|
|
#
|
|
-CONFIG_I2C_AT91=y
|
|
+CONFIG_I2C_GPIO=y
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
# CONFIG_I2C_STUB is not set
|
|
# CONFIG_I2C_PCA_ISA is not set
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/ecbat91_defconfig linux-2.6/arch/arm/configs/ecbat91_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/ecbat91_defconfig 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/ecbat91_defconfig 2007-12-31 15:18:42.000000000 +0200
|
|
@@ -0,0 +1,1315 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.22-rc4
|
|
+# Sat Jun 9 01:30:18 2007
|
|
+#
|
|
+CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
+# CONFIG_GENERIC_TIME is not set
|
|
+# CONFIG_GENERIC_CLOCKEVENTS is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
+CONFIG_VECTORS_BASE=0xffff0000
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# Code maturity level options
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+# CONFIG_IPC_NS is not set
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_UTS_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+CONFIG_IKCONFIG=y
|
|
+CONFIG_IKCONFIG_PROC=y
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+# CONFIG_RELAY is not set
|
|
+# CONFIG_BLK_DEV_INITRD is not set
|
|
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
+CONFIG_SYSCTL=y
|
|
+# CONFIG_EMBEDDED is not set
|
|
+CONFIG_UID16=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_TIMERFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+
|
|
+#
|
|
+# Loadable module support
|
|
+#
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+# CONFIG_MODVERSIONS is not set
|
|
+# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
+CONFIG_KMOD=y
|
|
+
|
|
+#
|
|
+# Block layer
|
|
+#
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+# CONFIG_IOSCHED_DEADLINE is not set
|
|
+# CONFIG_IOSCHED_CFQ is not set
|
|
+CONFIG_DEFAULT_AS=y
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="anticipatory"
|
|
+
|
|
+#
|
|
+# System Type
|
|
+#
|
|
+# CONFIG_ARCH_AAEC2000 is not set
|
|
+# CONFIG_ARCH_INTEGRATOR is not set
|
|
+# CONFIG_ARCH_REALVIEW is not set
|
|
+# CONFIG_ARCH_VERSATILE is not set
|
|
+CONFIG_ARCH_AT91=y
|
|
+# CONFIG_ARCH_CLPS7500 is not set
|
|
+# CONFIG_ARCH_CLPS711X is not set
|
|
+# CONFIG_ARCH_CO285 is not set
|
|
+# CONFIG_ARCH_EBSA110 is not set
|
|
+# CONFIG_ARCH_EP93XX is not set
|
|
+# CONFIG_ARCH_FOOTBRIDGE is not set
|
|
+# CONFIG_ARCH_NETX is not set
|
|
+# CONFIG_ARCH_H720X is not set
|
|
+# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
+# CONFIG_ARCH_IOP32X is not set
|
|
+# CONFIG_ARCH_IOP33X is not set
|
|
+# CONFIG_ARCH_IXP23XX is not set
|
|
+# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
+# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_KS8695 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_PNX4008 is not set
|
|
+# CONFIG_ARCH_PXA is not set
|
|
+# CONFIG_ARCH_RPC is not set
|
|
+# CONFIG_ARCH_SA1100 is not set
|
|
+# CONFIG_ARCH_S3C2410 is not set
|
|
+# CONFIG_ARCH_SHARK is not set
|
|
+# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_DAVINCI is not set
|
|
+# CONFIG_ARCH_OMAP is not set
|
|
+
|
|
+#
|
|
+# Atmel AT91 System-on-Chip
|
|
+#
|
|
+CONFIG_ARCH_AT91RM9200=y
|
|
+# CONFIG_ARCH_AT91SAM9260 is not set
|
|
+# CONFIG_ARCH_AT91SAM9261 is not set
|
|
+# CONFIG_ARCH_AT91SAM9263 is not set
|
|
+# CONFIG_ARCH_AT91SAM9RL is not set
|
|
+
|
|
+#
|
|
+# AT91RM9200 Board Type
|
|
+#
|
|
+# CONFIG_MACH_ONEARM is not set
|
|
+# CONFIG_ARCH_AT91RM9200DK is not set
|
|
+# CONFIG_MACH_AT91RM9200EK is not set
|
|
+# CONFIG_MACH_CSB337 is not set
|
|
+# CONFIG_MACH_CSB637 is not set
|
|
+# CONFIG_MACH_CARMEVA is not set
|
|
+# CONFIG_MACH_ATEB9200 is not set
|
|
+# CONFIG_MACH_KB9200 is not set
|
|
+# CONFIG_MACH_PICOTUX2XX is not set
|
|
+# CONFIG_MACH_KAFA is not set
|
|
+# CONFIG_MACH_CHUB is not set
|
|
+CONFIG_MACH_ECBAT91=y
|
|
+
|
|
+#
|
|
+# AT91 Board Options
|
|
+#
|
|
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
|
|
+
|
|
+#
|
|
+# AT91 Feature Selections
|
|
+#
|
|
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
+
|
|
+#
|
|
+# Processor Type
|
|
+#
|
|
+CONFIG_CPU_32=y
|
|
+CONFIG_CPU_ARM920T=y
|
|
+CONFIG_CPU_32v4T=y
|
|
+CONFIG_CPU_ABRT_EV4T=y
|
|
+CONFIG_CPU_CACHE_V4WT=y
|
|
+CONFIG_CPU_CACHE_VIVT=y
|
|
+CONFIG_CPU_COPY_V4WB=y
|
|
+CONFIG_CPU_TLB_V4WBI=y
|
|
+CONFIG_CPU_CP15=y
|
|
+CONFIG_CPU_CP15_MMU=y
|
|
+
|
|
+#
|
|
+# Processor Features
|
|
+#
|
|
+CONFIG_ARM_THUMB=y
|
|
+# CONFIG_CPU_ICACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
+
|
|
+#
|
|
+# Bus support
|
|
+#
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+
|
|
+#
|
|
+# PCCARD (PCMCIA/CardBus) support
|
|
+#
|
|
+CONFIG_PCCARD=y
|
|
+# CONFIG_PCMCIA_DEBUG is not set
|
|
+CONFIG_PCMCIA=y
|
|
+CONFIG_PCMCIA_LOAD_CIS=y
|
|
+CONFIG_PCMCIA_IOCTL=y
|
|
+
|
|
+#
|
|
+# PC-card bridges
|
|
+#
|
|
+CONFIG_AT91_CF=y
|
|
+
|
|
+#
|
|
+# Kernel Features
|
|
+#
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+CONFIG_PREEMPT=y
|
|
+# CONFIG_NO_IDLE_HZ is not set
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_AEABI is not set
|
|
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
+CONFIG_LEDS=y
|
|
+CONFIG_LEDS_TIMER=y
|
|
+CONFIG_LEDS_CPU=y
|
|
+CONFIG_ALIGNMENT_TRAP=y
|
|
+
|
|
+#
|
|
+# Boot options
|
|
+#
|
|
+CONFIG_ZBOOT_ROM_TEXT=0x0
|
|
+CONFIG_ZBOOT_ROM_BSS=0x0
|
|
+CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
|
|
+# CONFIG_XIP_KERNEL is not set
|
|
+# CONFIG_KEXEC is not set
|
|
+
|
|
+#
|
|
+# Floating point emulation
|
|
+#
|
|
+
|
|
+#
|
|
+# At least one emulation must be selected
|
|
+#
|
|
+CONFIG_FPE_NWFPE=y
|
|
+# CONFIG_FPE_NWFPE_XP is not set
|
|
+# CONFIG_FPE_FASTFPE is not set
|
|
+
|
|
+#
|
|
+# Userspace binary formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_AOUT is not set
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+# CONFIG_ARTHUR is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+# CONFIG_PM is not set
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+CONFIG_XFRM=y
|
|
+# CONFIG_XFRM_USER is not set
|
|
+# CONFIG_XFRM_SUB_POLICY is not set
|
|
+# CONFIG_XFRM_MIGRATE is not set
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+# CONFIG_IP_PNP_BOOTP is not set
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
|
|
+CONFIG_INET_XFRM_MODE_TUNNEL=y
|
|
+CONFIG_INET_XFRM_MODE_BEET=y
|
|
+CONFIG_INET_DIAG=y
|
|
+CONFIG_INET_TCP_DIAG=y
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+
|
|
+#
|
|
+# QoS and/or fair queueing
|
|
+#
|
|
+# CONFIG_NET_SCHED is not set
|
|
+CONFIG_NET_SCH_FIFO=y
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+CONFIG_CFG80211=y
|
|
+CONFIG_WIRELESS_EXT=y
|
|
+CONFIG_MAC80211=y
|
|
+# CONFIG_MAC80211_DEBUG is not set
|
|
+CONFIG_IEEE80211=y
|
|
+# CONFIG_IEEE80211_DEBUG is not set
|
|
+CONFIG_IEEE80211_CRYPT_WEP=y
|
|
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
|
|
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
|
|
+CONFIG_IEEE80211_SOFTMAC=y
|
|
+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
|
|
+# CONFIG_RFKILL is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+# CONFIG_STANDALONE is not set
|
|
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
|
+CONFIG_FW_LOADER=y
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+
|
|
+#
|
|
+# Connector - unified userspace <-> kernelspace linker
|
|
+#
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+CONFIG_MTD_CMDLINE_PARTS=y
|
|
+CONFIG_MTD_AFS_PARTS=y
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+CONFIG_MTD_DATAFLASH=y
|
|
+# CONFIG_MTD_M25P80 is not set
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+# CONFIG_MTD_NAND is not set
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+# CONFIG_MTD_UBI is not set
|
|
+
|
|
+#
|
|
+# Parallel port support
|
|
+#
|
|
+# CONFIG_PARPORT is not set
|
|
+
|
|
+#
|
|
+# Plug and Play support
|
|
+#
|
|
+# CONFIG_PNPACPI is not set
|
|
+
|
|
+#
|
|
+# Block devices
|
|
+#
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+# CONFIG_BLK_DEV_RAM is not set
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+# CONFIG_IDE is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+CONFIG_CHR_DEV_SG=y
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+CONFIG_SCSI_WAIT_SCAN=m
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+
|
|
+#
|
|
+# SCSI low-level drivers
|
|
+#
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+
|
|
+#
|
|
+# PCMCIA SCSI adapter support
|
|
+#
|
|
+# CONFIG_PCMCIA_AHA152X is not set
|
|
+# CONFIG_PCMCIA_FDOMAIN is not set
|
|
+# CONFIG_PCMCIA_NINJA_SCSI is not set
|
|
+# CONFIG_PCMCIA_QLOGIC is not set
|
|
+# CONFIG_PCMCIA_SYM53C500 is not set
|
|
+# CONFIG_ATA is not set
|
|
+
|
|
+#
|
|
+# Multi-device support (RAID and LVM)
|
|
+#
|
|
+# CONFIG_MD is not set
|
|
+
|
|
+#
|
|
+# Network device support
|
|
+#
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+# CONFIG_PHYLIB is not set
|
|
+
|
|
+#
|
|
+# Ethernet (10 or 100Mbit)
|
|
+#
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_ARM_AT91_ETHER=y
|
|
+# CONFIG_SMC91X is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET_MII is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_NET_PCMCIA is not set
|
|
+# CONFIG_WAN is not set
|
|
+CONFIG_PPP=y
|
|
+CONFIG_PPP_MULTILINK=y
|
|
+CONFIG_PPP_FILTER=y
|
|
+CONFIG_PPP_ASYNC=y
|
|
+# CONFIG_PPP_SYNC_TTY is not set
|
|
+# CONFIG_PPP_DEFLATE is not set
|
|
+# CONFIG_PPP_BSDCOMP is not set
|
|
+# CONFIG_PPP_MPPE is not set
|
|
+# CONFIG_PPPOE is not set
|
|
+# CONFIG_SLIP is not set
|
|
+CONFIG_SLHC=y
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+
|
|
+#
|
|
+# ISDN subsystem
|
|
+#
|
|
+# CONFIG_ISDN is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+# CONFIG_INPUT_TSDEV is not set
|
|
+# CONFIG_INPUT_EVDEV is not set
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+# CONFIG_SERIO is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+# CONFIG_SERIAL_8250 is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_ATMEL=y
|
|
+CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=256
|
|
+
|
|
+#
|
|
+# IPMI
|
|
+#
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+CONFIG_WATCHDOG=y
|
|
+CONFIG_WATCHDOG_NOWAYOUT=y
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+# CONFIG_AT91RM9200_WATCHDOG is not set
|
|
+
|
|
+#
|
|
+# USB-based Watchdog Cards
|
|
+#
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
+CONFIG_HW_RANDOM=y
|
|
+# CONFIG_NVRAM is not set
|
|
+# CONFIG_R3964 is not set
|
|
+
|
|
+#
|
|
+# PCMCIA character devices
|
|
+#
|
|
+# CONFIG_SYNCLINK_CS is not set
|
|
+# CONFIG_CARDMAN_4000 is not set
|
|
+# CONFIG_CARDMAN_4040 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+
|
|
+#
|
|
+# TPM devices
|
|
+#
|
|
+# CONFIG_TCG_TPM is not set
|
|
+# CONFIG_AT91_SPI is not set
|
|
+CONFIG_I2C=y
|
|
+CONFIG_I2C_BOARDINFO=y
|
|
+CONFIG_I2C_CHARDEV=y
|
|
+
|
|
+#
|
|
+# I2C Algorithms
|
|
+#
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
|
+
|
|
+#
|
|
+# I2C Hardware Bus support
|
|
+#
|
|
+CONFIG_I2C_GPIO=y
|
|
+# CONFIG_I2C_GPIO is not set
|
|
+# CONFIG_I2C_OCORES is not set
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_SIMTEC is not set
|
|
+# CONFIG_I2C_STUB is not set
|
|
+# CONFIG_I2C_TINY_USB is not set
|
|
+# CONFIG_I2C_PCA is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous I2C Chip support
|
|
+#
|
|
+# CONFIG_SENSORS_DS1337 is not set
|
|
+# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
|
+# CONFIG_SENSORS_PCA9539 is not set
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+CONFIG_SPI=y
|
|
+CONFIG_SPI_MASTER=y
|
|
+
|
|
+#
|
|
+# SPI Master Controller Drivers
|
|
+#
|
|
+# CONFIG_SPI_ATMEL is not set
|
|
+CONFIG_SPI_BITBANG=y
|
|
+CONFIG_SPI_AT91=y
|
|
+
|
|
+#
|
|
+# SPI Protocol Masters
|
|
+#
|
|
+# CONFIG_SPI_AT25 is not set
|
|
+# CONFIG_SPI_SPIDEV is not set
|
|
+
|
|
+#
|
|
+# Dallas's 1-wire bus
|
|
+#
|
|
+# CONFIG_W1 is not set
|
|
+CONFIG_HWMON=y
|
|
+# CONFIG_HWMON_VID is not set
|
|
+# CONFIG_SENSORS_ABITUGURU is not set
|
|
+# CONFIG_SENSORS_AD7418 is not set
|
|
+# CONFIG_SENSORS_ADM1021 is not set
|
|
+# CONFIG_SENSORS_ADM1025 is not set
|
|
+# CONFIG_SENSORS_ADM1026 is not set
|
|
+# CONFIG_SENSORS_ADM1029 is not set
|
|
+# CONFIG_SENSORS_ADM1031 is not set
|
|
+# CONFIG_SENSORS_ADM9240 is not set
|
|
+# CONFIG_SENSORS_ASB100 is not set
|
|
+# CONFIG_SENSORS_ATXP1 is not set
|
|
+# CONFIG_SENSORS_DS1621 is not set
|
|
+# CONFIG_SENSORS_F71805F is not set
|
|
+# CONFIG_SENSORS_FSCHER is not set
|
|
+# CONFIG_SENSORS_FSCPOS is not set
|
|
+# CONFIG_SENSORS_GL518SM is not set
|
|
+# CONFIG_SENSORS_GL520SM is not set
|
|
+# CONFIG_SENSORS_IT87 is not set
|
|
+# CONFIG_SENSORS_LM63 is not set
|
|
+# CONFIG_SENSORS_LM70 is not set
|
|
+# CONFIG_SENSORS_LM75 is not set
|
|
+# CONFIG_SENSORS_LM77 is not set
|
|
+# CONFIG_SENSORS_LM78 is not set
|
|
+# CONFIG_SENSORS_LM80 is not set
|
|
+# CONFIG_SENSORS_LM83 is not set
|
|
+# CONFIG_SENSORS_LM85 is not set
|
|
+# CONFIG_SENSORS_LM87 is not set
|
|
+# CONFIG_SENSORS_LM90 is not set
|
|
+# CONFIG_SENSORS_LM92 is not set
|
|
+# CONFIG_SENSORS_MAX1619 is not set
|
|
+# CONFIG_SENSORS_MAX6650 is not set
|
|
+# CONFIG_SENSORS_PC87360 is not set
|
|
+# CONFIG_SENSORS_PC87427 is not set
|
|
+# CONFIG_SENSORS_SMSC47M1 is not set
|
|
+# CONFIG_SENSORS_SMSC47M192 is not set
|
|
+# CONFIG_SENSORS_SMSC47B397 is not set
|
|
+# CONFIG_SENSORS_VT1211 is not set
|
|
+# CONFIG_SENSORS_W83781D is not set
|
|
+# CONFIG_SENSORS_W83791D is not set
|
|
+# CONFIG_SENSORS_W83792D is not set
|
|
+# CONFIG_SENSORS_W83793 is not set
|
|
+# CONFIG_SENSORS_W83L785TS is not set
|
|
+# CONFIG_SENSORS_W83627HF is not set
|
|
+# CONFIG_SENSORS_W83627EHF is not set
|
|
+# CONFIG_HWMON_DEBUG_CHIP is not set
|
|
+
|
|
+#
|
|
+# Misc devices
|
|
+#
|
|
+# CONFIG_BLINK is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# LED devices
|
|
+#
|
|
+CONFIG_NEW_LEDS=y
|
|
+CONFIG_LEDS_CLASS=y
|
|
+
|
|
+#
|
|
+# LED drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# LED Triggers
|
|
+#
|
|
+# CONFIG_LEDS_TRIGGERS is not set
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+CONFIG_DAB=y
|
|
+# CONFIG_USB_DABUSB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_FB is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+# CONFIG_SOUND is not set
|
|
+
|
|
+#
|
|
+# HID Devices
|
|
+#
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+# CONFIG_USB_HID is not set
|
|
+
|
|
+#
|
|
+# USB HID Boot Protocol drivers
|
|
+#
|
|
+# CONFIG_USB_KBD is not set
|
|
+# CONFIG_USB_MOUSE is not set
|
|
+
|
|
+#
|
|
+# USB support
|
|
+#
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+CONFIG_USB_DEVICEFS=y
|
|
+# CONFIG_USB_DEVICE_CLASS is not set
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+CONFIG_USB_PRINTER=y
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+# CONFIG_USB_MON is not set
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+# CONFIG_USB_TEST is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+CONFIG_USB_GADGET_AT91=y
|
|
+CONFIG_USB_AT91=y
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+# CONFIG_USB_GADGET_DUALSPEED is not set
|
|
+# CONFIG_USB_ZERO is not set
|
|
+# CONFIG_USB_ETH is not set
|
|
+# CONFIG_USB_GADGETFS is not set
|
|
+# CONFIG_USB_FILE_STORAGE is not set
|
|
+# CONFIG_USB_G_SERIAL is not set
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+CONFIG_MMC_DEBUG=y
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_AT91=y
|
|
+
|
|
+#
|
|
+# Real Time Clock
|
|
+#
|
|
+CONFIG_RTC_LIB=y
|
|
+CONFIG_RTC_CLASS=y
|
|
+# CONFIG_RTC_HCTOSYS is not set
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
+
|
|
+#
|
|
+# RTC interfaces
|
|
+#
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
+
|
|
+#
|
|
+# I2C RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_DS1307 is not set
|
|
+# CONFIG_RTC_DRV_DS1672 is not set
|
|
+# CONFIG_RTC_DRV_MAX6900 is not set
|
|
+# CONFIG_RTC_DRV_RS5C372 is not set
|
|
+# CONFIG_RTC_DRV_ISL1208 is not set
|
|
+# CONFIG_RTC_DRV_X1205 is not set
|
|
+# CONFIG_RTC_DRV_PCF8563 is not set
|
|
+# CONFIG_RTC_DRV_PCF8583 is not set
|
|
+
|
|
+#
|
|
+# SPI RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_RS5C348 is not set
|
|
+# CONFIG_RTC_DRV_MAX6902 is not set
|
|
+
|
|
+#
|
|
+# Platform RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_CMOS is not set
|
|
+# CONFIG_RTC_DRV_DS1553 is not set
|
|
+# CONFIG_RTC_DRV_DS1742 is not set
|
|
+# CONFIG_RTC_DRV_M48T86 is not set
|
|
+# CONFIG_RTC_DRV_V3020 is not set
|
|
+
|
|
+#
|
|
+# on-CPU RTC drivers
|
|
+#
|
|
+CONFIG_RTC_DRV_AT91RM9200=y
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+# CONFIG_EXT2_FS_XATTR is not set
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+CONFIG_EXT3_FS=y
|
|
+CONFIG_EXT3_FS_XATTR=y
|
|
+# CONFIG_EXT3_FS_POSIX_ACL is not set
|
|
+# CONFIG_EXT3_FS_SECURITY is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_JBD=y
|
|
+# CONFIG_JBD_DEBUG is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+CONFIG_REISERFS_FS=y
|
|
+# CONFIG_REISERFS_CHECK is not set
|
|
+# CONFIG_REISERFS_PROC_INFO is not set
|
|
+# CONFIG_REISERFS_FS_XATTR is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+# CONFIG_MINIX_FS is not set
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+# CONFIG_MSDOS_FS is not set
|
|
+# CONFIG_VFAT_FS is not set
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+CONFIG_RAMFS=y
|
|
+CONFIG_CONFIGFS_FS=y
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+# CONFIG_JFFS2_FS is not set
|
|
+CONFIG_CRAMFS=y
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+
|
|
+#
|
|
+# Network File Systems
|
|
+#
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+CONFIG_NFS_V3_ACL=y
|
|
+CONFIG_NFS_V4=y
|
|
+# CONFIG_NFS_DIRECTIO is not set
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_ACL_SUPPORT=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+CONFIG_SUNRPC_GSS=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+CONFIG_RPCSEC_GSS_KRB5=y
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+# CONFIG_9P_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+CONFIG_PARTITION_ADVANCED=y
|
|
+# CONFIG_ACORN_PARTITION is not set
|
|
+# CONFIG_OSF_PARTITION is not set
|
|
+# CONFIG_AMIGA_PARTITION is not set
|
|
+# CONFIG_ATARI_PARTITION is not set
|
|
+# CONFIG_MAC_PARTITION is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+# CONFIG_BSD_DISKLABEL is not set
|
|
+# CONFIG_MINIX_SUBPARTITION is not set
|
|
+# CONFIG_SOLARIS_X86_PARTITION is not set
|
|
+# CONFIG_UNIXWARE_DISKLABEL is not set
|
|
+# CONFIG_LDM_PARTITION is not set
|
|
+# CONFIG_SGI_PARTITION is not set
|
|
+# CONFIG_ULTRIX_PARTITION is not set
|
|
+# CONFIG_SUN_PARTITION is not set
|
|
+# CONFIG_KARMA_PARTITION is not set
|
|
+# CONFIG_EFI_PARTITION is not set
|
|
+# CONFIG_SYSV68_PARTITION is not set
|
|
+
|
|
+#
|
|
+# Native Language Support
|
|
+#
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+# CONFIG_NLS_CODEPAGE_437 is not set
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+# CONFIG_NLS_CODEPAGE_850 is not set
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+# CONFIG_NLS_CODEPAGE_936 is not set
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+# CONFIG_NLS_ASCII is not set
|
|
+# CONFIG_NLS_ISO8859_1 is not set
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+
|
|
+#
|
|
+# Distributed Lock Manager
|
|
+#
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Profiling support
|
|
+#
|
|
+# CONFIG_PROFILING is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+# CONFIG_MAGIC_SYSRQ is not set
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+CONFIG_DEBUG_BUGVERBOSE=y
|
|
+CONFIG_FRAME_POINTER=y
|
|
+CONFIG_DEBUG_USER=y
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+
|
|
+#
|
|
+# Cryptographic options
|
|
+#
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+CONFIG_CRYPTO_SHA1=y
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+CONFIG_CRYPTO_ECB=y
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+CONFIG_CRYPTO_PCBC=y
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_CRYPTD is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+CONFIG_CRYPTO_AES=y
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+CONFIG_CRYPTO_ARC4=y
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_DEFLATE is not set
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+
|
|
+#
|
|
+# Hardware crypto devices
|
|
+#
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+CONFIG_CRC_CCITT=y
|
|
+# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/homematic_defconfig linux-2.6/arch/arm/configs/homematic_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/homematic_defconfig 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/homematic_defconfig 2007-12-31 15:18:42.000000000 +0200
|
|
@@ -0,0 +1,1263 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.21.3
|
|
+# Mon Jun 18 12:28:42 2007
|
|
+#
|
|
+CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
+# CONFIG_GENERIC_TIME is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
+CONFIG_VECTORS_BASE=0xffff0000
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# Code maturity level options
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_LOCALVERSION=""
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+# CONFIG_SWAP is not set
|
|
+CONFIG_SYSVIPC=y
|
|
+# CONFIG_IPC_NS is not set
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+# CONFIG_POSIX_MQUEUE is not set
|
|
+# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_UTS_NS is not set
|
|
+# CONFIG_AUDIT is not set
|
|
+# CONFIG_IKCONFIG is not set
|
|
+# CONFIG_SYSFS_DEPRECATED is not set
|
|
+# CONFIG_RELAY is not set
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
+CONFIG_INITRAMFS_SOURCE=""
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
+CONFIG_SYSCTL=y
|
|
+# CONFIG_EMBEDDED is not set
|
|
+CONFIG_UID16=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_SLAB=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+# CONFIG_SLOB is not set
|
|
+
|
|
+#
|
|
+# Loadable module support
|
|
+#
|
|
+CONFIG_MODULES=y
|
|
+CONFIG_MODULE_UNLOAD=y
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+# CONFIG_MODVERSIONS is not set
|
|
+# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
+CONFIG_KMOD=y
|
|
+
|
|
+#
|
|
+# Block layer
|
|
+#
|
|
+CONFIG_BLOCK=y
|
|
+# CONFIG_LBD is not set
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+# CONFIG_IOSCHED_AS is not set
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+# CONFIG_IOSCHED_CFQ is not set
|
|
+# CONFIG_DEFAULT_AS is not set
|
|
+CONFIG_DEFAULT_DEADLINE=y
|
|
+# CONFIG_DEFAULT_CFQ is not set
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="deadline"
|
|
+
|
|
+#
|
|
+# System Type
|
|
+#
|
|
+# CONFIG_ARCH_AAEC2000 is not set
|
|
+# CONFIG_ARCH_INTEGRATOR is not set
|
|
+# CONFIG_ARCH_REALVIEW is not set
|
|
+# CONFIG_ARCH_VERSATILE is not set
|
|
+CONFIG_ARCH_AT91=y
|
|
+# CONFIG_ARCH_CLPS7500 is not set
|
|
+# CONFIG_ARCH_CLPS711X is not set
|
|
+# CONFIG_ARCH_CO285 is not set
|
|
+# CONFIG_ARCH_EBSA110 is not set
|
|
+# CONFIG_ARCH_EP93XX is not set
|
|
+# CONFIG_ARCH_FOOTBRIDGE is not set
|
|
+# CONFIG_ARCH_NETX is not set
|
|
+# CONFIG_ARCH_H720X is not set
|
|
+# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP32X is not set
|
|
+# CONFIG_ARCH_IOP33X is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
+# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP23XX is not set
|
|
+# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_PNX4008 is not set
|
|
+# CONFIG_ARCH_PXA is not set
|
|
+# CONFIG_ARCH_RPC is not set
|
|
+# CONFIG_ARCH_SA1100 is not set
|
|
+# CONFIG_ARCH_S3C2410 is not set
|
|
+# CONFIG_ARCH_SHARK is not set
|
|
+# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_OMAP is not set
|
|
+
|
|
+#
|
|
+# Atmel AT91 System-on-Chip
|
|
+#
|
|
+CONFIG_ARCH_AT91RM9200=y
|
|
+# CONFIG_ARCH_AT91SAM9260 is not set
|
|
+# CONFIG_ARCH_AT91SAM9261 is not set
|
|
+# CONFIG_ARCH_AT91SAM9263 is not set
|
|
+# CONFIG_ARCH_AT91SAM9RL is not set
|
|
+
|
|
+#
|
|
+# AT91RM9200 Board Type
|
|
+#
|
|
+# CONFIG_MACH_ONEARM is not set
|
|
+# CONFIG_ARCH_AT91RM9200DK is not set
|
|
+# CONFIG_MACH_AT91RM9200EK is not set
|
|
+# CONFIG_MACH_CSB337 is not set
|
|
+# CONFIG_MACH_CSB637 is not set
|
|
+# CONFIG_MACH_CARMEVA is not set
|
|
+# CONFIG_MACH_ATEB9200 is not set
|
|
+# CONFIG_MACH_KB9200 is not set
|
|
+# CONFIG_MACH_KAFA is not set
|
|
+# CONFIG_MACH_CHUB is not set
|
|
+CONFIG_MACH_HOMEMATIC=y
|
|
+
|
|
+#
|
|
+# AT91 Board Options
|
|
+#
|
|
+
|
|
+#
|
|
+# AT91 Feature Selections
|
|
+#
|
|
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
+
|
|
+#
|
|
+# Processor Type
|
|
+#
|
|
+CONFIG_CPU_32=y
|
|
+CONFIG_CPU_ARM920T=y
|
|
+CONFIG_CPU_32v4T=y
|
|
+CONFIG_CPU_ABRT_EV4T=y
|
|
+CONFIG_CPU_CACHE_V4WT=y
|
|
+CONFIG_CPU_CACHE_VIVT=y
|
|
+CONFIG_CPU_COPY_V4WB=y
|
|
+CONFIG_CPU_TLB_V4WBI=y
|
|
+CONFIG_CPU_CP15=y
|
|
+CONFIG_CPU_CP15_MMU=y
|
|
+
|
|
+#
|
|
+# Processor Features
|
|
+#
|
|
+CONFIG_ARM_THUMB=y
|
|
+# CONFIG_CPU_ICACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
+
|
|
+#
|
|
+# Bus support
|
|
+#
|
|
+
|
|
+#
|
|
+# PCCARD (PCMCIA/CardBus) support
|
|
+#
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Kernel Features
|
|
+#
|
|
+# CONFIG_PREEMPT is not set
|
|
+# CONFIG_NO_IDLE_HZ is not set
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_AEABI is not set
|
|
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
+# CONFIG_LEDS is not set
|
|
+CONFIG_ALIGNMENT_TRAP=y
|
|
+
|
|
+#
|
|
+# Boot options
|
|
+#
|
|
+CONFIG_ZBOOT_ROM_TEXT=0x0
|
|
+CONFIG_ZBOOT_ROM_BSS=0x0
|
|
+CONFIG_CMDLINE=""
|
|
+# CONFIG_XIP_KERNEL is not set
|
|
+# CONFIG_KEXEC is not set
|
|
+
|
|
+#
|
|
+# Floating point emulation
|
|
+#
|
|
+
|
|
+#
|
|
+# At least one emulation must be selected
|
|
+#
|
|
+CONFIG_FPE_NWFPE=y
|
|
+# CONFIG_FPE_NWFPE_XP is not set
|
|
+# CONFIG_FPE_FASTFPE is not set
|
|
+
|
|
+#
|
|
+# Userspace binary formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_AOUT is not set
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+# CONFIG_ARTHUR is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+# CONFIG_PM is not set
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+# CONFIG_NETDEBUG is not set
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+CONFIG_IP_MULTICAST=y
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+CONFIG_IP_PNP_DHCP=y
|
|
+# CONFIG_IP_PNP_BOOTP is not set
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_IP_MROUTE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+CONFIG_INET_DIAG=y
|
|
+CONFIG_INET_TCP_DIAG=y
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+
|
|
+#
|
|
+# DCCP Configuration (EXPERIMENTAL)
|
|
+#
|
|
+# CONFIG_IP_DCCP is not set
|
|
+
|
|
+#
|
|
+# SCTP Configuration (EXPERIMENTAL)
|
|
+#
|
|
+# CONFIG_IP_SCTP is not set
|
|
+
|
|
+#
|
|
+# TIPC Configuration (EXPERIMENTAL)
|
|
+#
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+
|
|
+#
|
|
+# QoS and/or fair queueing
|
|
+#
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+CONFIG_IEEE80211=m
|
|
+# CONFIG_IEEE80211_DEBUG is not set
|
|
+CONFIG_IEEE80211_CRYPT_WEP=m
|
|
+CONFIG_IEEE80211_CRYPT_CCMP=m
|
|
+CONFIG_IEEE80211_CRYPT_TKIP=m
|
|
+CONFIG_IEEE80211_SOFTMAC=m
|
|
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
|
|
+CONFIG_WIRELESS_EXT=y
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+CONFIG_FW_LOADER=y
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+
|
|
+#
|
|
+# Connector - unified userspace <-> kernelspace linker
|
|
+#
|
|
+# CONFIG_CONNECTOR is not set
|
|
+
|
|
+#
|
|
+# Memory Technology Devices (MTD)
|
|
+#
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+CONFIG_MTD_CMDLINE_PARTS=y
|
|
+# CONFIG_MTD_AFS_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_AT91_DATAFLASH=y
|
|
+
|
|
+#
|
|
+# NAND Flash Device Drivers
|
|
+#
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+CONFIG_MTD_NAND_AT91=y
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+
|
|
+#
|
|
+# OneNAND Flash Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# Parallel port support
|
|
+#
|
|
+# CONFIG_PARPORT is not set
|
|
+
|
|
+#
|
|
+# Plug and Play support
|
|
+#
|
|
+# CONFIG_PNPACPI is not set
|
|
+
|
|
+#
|
|
+# Block devices
|
|
+#
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+# CONFIG_BLK_DEV_LOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
+CONFIG_SCSI=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+# CONFIG_SCSI_PROC_FS is not set
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+# CONFIG_CHR_DEV_SG is not set
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+# CONFIG_SCSI_MULTI_LUN is not set
|
|
+# CONFIG_SCSI_CONSTANTS is not set
|
|
+# CONFIG_SCSI_LOGGING is not set
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+
|
|
+#
|
|
+# SCSI low-level drivers
|
|
+#
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
+# CONFIG_SCSI_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
|
|
+#
|
|
+# CONFIG_ATA is not set
|
|
+
|
|
+#
|
|
+# Multi-device support (RAID and LVM)
|
|
+#
|
|
+# CONFIG_MD is not set
|
|
+
|
|
+#
|
|
+# Fusion MPT device support
|
|
+#
|
|
+# CONFIG_FUSION is not set
|
|
+
|
|
+#
|
|
+# IEEE 1394 (FireWire) support
|
|
+#
|
|
+
|
|
+#
|
|
+# I2O device support
|
|
+#
|
|
+
|
|
+#
|
|
+# Network device support
|
|
+#
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+
|
|
+#
|
|
+# PHY device support
|
|
+#
|
|
+# CONFIG_PHYLIB is not set
|
|
+
|
|
+#
|
|
+# Ethernet (10 or 100Mbit)
|
|
+#
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_ARM_AT91_ETHER=y
|
|
+# CONFIG_SMC91X is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+
|
|
+#
|
|
+# Ethernet (1000 Mbit)
|
|
+#
|
|
+
|
|
+#
|
|
+# Ethernet (10000 Mbit)
|
|
+#
|
|
+
|
|
+#
|
|
+# Token Ring devices
|
|
+#
|
|
+
|
|
+#
|
|
+# Wireless LAN (non-hamradio)
|
|
+#
|
|
+CONFIG_NET_RADIO=y
|
|
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
|
|
+
|
|
+#
|
|
+# Obsolete Wireless cards support (pre-802.11)
|
|
+#
|
|
+# CONFIG_STRIP is not set
|
|
+# CONFIG_USB_ZD1201 is not set
|
|
+# CONFIG_HOSTAP is not set
|
|
+CONFIG_ZD1211RW=m
|
|
+# CONFIG_ZD1211RW_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Wan interfaces
|
|
+#
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+
|
|
+#
|
|
+# ISDN subsystem
|
|
+#
|
|
+# CONFIG_ISDN is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+# CONFIG_INPUT_TSDEV is not set
|
|
+# CONFIG_INPUT_EVDEV is not set
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+CONFIG_INPUT_KEYBOARD=y
|
|
+CONFIG_KEYBOARD_ATKBD=y
|
|
+# CONFIG_KEYBOARD_SUNKBD is not set
|
|
+# CONFIG_KEYBOARD_LKKBD is not set
|
|
+# CONFIG_KEYBOARD_XTKBD is not set
|
|
+# CONFIG_KEYBOARD_NEWTON is not set
|
|
+# CONFIG_KEYBOARD_STOWAWAY is not set
|
|
+# CONFIG_KEYBOARD_GPIO is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+CONFIG_SERIO=y
|
|
+CONFIG_SERIO_SERPORT=y
|
|
+CONFIG_SERIO_LIBPS2=y
|
|
+# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+# CONFIG_SERIAL_8250 is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_ATMEL=y
|
|
+CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=256
|
|
+
|
|
+#
|
|
+# IPMI
|
|
+#
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+
|
|
+#
|
|
+# Watchdog Cards
|
|
+#
|
|
+CONFIG_WATCHDOG=y
|
|
+CONFIG_WATCHDOG_NOWAYOUT=y
|
|
+
|
|
+#
|
|
+# Watchdog Device Drivers
|
|
+#
|
|
+# CONFIG_SOFT_WATCHDOG is not set
|
|
+CONFIG_AT91RM9200_WATCHDOG=y
|
|
+
|
|
+#
|
|
+# USB-based Watchdog Cards
|
|
+#
|
|
+# CONFIG_USBPCWATCHDOG is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_NVRAM is not set
|
|
+# CONFIG_DTLK is not set
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+
|
|
+#
|
|
+# TPM devices
|
|
+#
|
|
+# CONFIG_TCG_TPM is not set
|
|
+CONFIG_AT91_SPI=y
|
|
+# CONFIG_AT91_SPIDEV is not set
|
|
+
|
|
+#
|
|
+# I2C support
|
|
+#
|
|
+CONFIG_I2C=y
|
|
+CONFIG_I2C_CHARDEV=m
|
|
+
|
|
+#
|
|
+# I2C Algorithms
|
|
+#
|
|
+# CONFIG_I2C_ALGOBIT is not set
|
|
+# CONFIG_I2C_ALGOPCF is not set
|
|
+# CONFIG_I2C_ALGOPCA is not set
|
|
+
|
|
+#
|
|
+# I2C Hardware Bus support
|
|
+#
|
|
+# CONFIG_I2C_AT91 is not set
|
|
+# CONFIG_I2C_OCORES is not set
|
|
+# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
+# CONFIG_I2C_STUB is not set
|
|
+# CONFIG_I2C_PCA is not set
|
|
+# CONFIG_I2C_PCA_ISA is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous I2C Chip support
|
|
+#
|
|
+# CONFIG_SENSORS_DS1337 is not set
|
|
+# CONFIG_SENSORS_DS1374 is not set
|
|
+# CONFIG_SENSORS_EEPROM is not set
|
|
+# CONFIG_SENSORS_PCF8574 is not set
|
|
+# CONFIG_SENSORS_PCA9539 is not set
|
|
+# CONFIG_SENSORS_PCF8591 is not set
|
|
+# CONFIG_SENSORS_MAX6875 is not set
|
|
+# CONFIG_I2C_DEBUG_CORE is not set
|
|
+# CONFIG_I2C_DEBUG_ALGO is not set
|
|
+# CONFIG_I2C_DEBUG_BUS is not set
|
|
+# CONFIG_I2C_DEBUG_CHIP is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+
|
|
+#
|
|
+# Dallas's 1-wire bus
|
|
+#
|
|
+# CONFIG_W1 is not set
|
|
+
|
|
+#
|
|
+# Hardware Monitoring support
|
|
+#
|
|
+# CONFIG_HWMON is not set
|
|
+# CONFIG_HWMON_VID is not set
|
|
+
|
|
+#
|
|
+# Misc devices
|
|
+#
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# LED devices
|
|
+#
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+
|
|
+#
|
|
+# LED drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# LED Triggers
|
|
+#
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+
|
|
+#
|
|
+# Digital Video Broadcasting Devices
|
|
+#
|
|
+# CONFIG_DVB is not set
|
|
+# CONFIG_USB_DABUSB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+# CONFIG_FB is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+# CONFIG_SOUND is not set
|
|
+
|
|
+#
|
|
+# HID Devices
|
|
+#
|
|
+# CONFIG_HID is not set
|
|
+
|
|
+#
|
|
+# USB support
|
|
+#
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+CONFIG_USB_DEVICEFS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+# CONFIG_USB_LIBUSUAL is not set
|
|
+
|
|
+#
|
|
+# USB Input Devices
|
|
+#
|
|
+# CONFIG_USB_HID is not set
|
|
+
|
|
+#
|
|
+# USB HID Boot Protocol drivers
|
|
+#
|
|
+# CONFIG_USB_KBD is not set
|
|
+# CONFIG_USB_MOUSE is not set
|
|
+# CONFIG_USB_AIPTEK is not set
|
|
+# CONFIG_USB_WACOM is not set
|
|
+# CONFIG_USB_ACECAD is not set
|
|
+# CONFIG_USB_KBTAB is not set
|
|
+# CONFIG_USB_POWERMATE is not set
|
|
+# CONFIG_USB_TOUCHSCREEN is not set
|
|
+# CONFIG_USB_YEALINK is not set
|
|
+# CONFIG_USB_XPAD is not set
|
|
+# CONFIG_USB_ATI_REMOTE is not set
|
|
+# CONFIG_USB_ATI_REMOTE2 is not set
|
|
+# CONFIG_USB_KEYSPAN_REMOTE is not set
|
|
+# CONFIG_USB_APPLETOUCH is not set
|
|
+# CONFIG_USB_GTCO is not set
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET_MII is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_USB_MON is not set
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+CONFIG_USB_SERIAL=m
|
|
+# CONFIG_USB_SERIAL_GENERIC is not set
|
|
+# CONFIG_USB_SERIAL_AIRCABLE is not set
|
|
+# CONFIG_USB_SERIAL_AIRPRIME is not set
|
|
+# CONFIG_USB_SERIAL_ARK3116 is not set
|
|
+# CONFIG_USB_SERIAL_BELKIN is not set
|
|
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
|
|
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
|
|
+# CONFIG_USB_SERIAL_CP2101 is not set
|
|
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
|
|
+# CONFIG_USB_SERIAL_EMPEG is not set
|
|
+CONFIG_USB_SERIAL_FTDI_SIO=m
|
|
+# CONFIG_USB_SERIAL_FUNSOFT is not set
|
|
+# CONFIG_USB_SERIAL_VISOR is not set
|
|
+# CONFIG_USB_SERIAL_IPAQ is not set
|
|
+# CONFIG_USB_SERIAL_IR is not set
|
|
+# CONFIG_USB_SERIAL_EDGEPORT is not set
|
|
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
|
|
+# CONFIG_USB_SERIAL_GARMIN is not set
|
|
+# CONFIG_USB_SERIAL_IPW is not set
|
|
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
|
|
+# CONFIG_USB_SERIAL_KEYSPAN is not set
|
|
+# CONFIG_USB_SERIAL_KLSI is not set
|
|
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
|
|
+# CONFIG_USB_SERIAL_MCT_U232 is not set
|
|
+# CONFIG_USB_SERIAL_MOS7720 is not set
|
|
+# CONFIG_USB_SERIAL_MOS7840 is not set
|
|
+# CONFIG_USB_SERIAL_NAVMAN is not set
|
|
+# CONFIG_USB_SERIAL_PL2303 is not set
|
|
+# CONFIG_USB_SERIAL_HP4X is not set
|
|
+# CONFIG_USB_SERIAL_SAFE is not set
|
|
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
|
|
+# CONFIG_USB_SERIAL_TI is not set
|
|
+# CONFIG_USB_SERIAL_CYBERJACK is not set
|
|
+# CONFIG_USB_SERIAL_XIRCOM is not set
|
|
+# CONFIG_USB_SERIAL_OPTION is not set
|
|
+# CONFIG_USB_SERIAL_OMNINET is not set
|
|
+# CONFIG_USB_SERIAL_DEBUG is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+# CONFIG_USB_TEST is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=m
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+CONFIG_USB_GADGET_AT91=y
|
|
+CONFIG_USB_AT91=m
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+# CONFIG_USB_GADGET_DUALSPEED is not set
|
|
+CONFIG_USB_ZERO=m
|
|
+CONFIG_USB_ETH=m
|
|
+CONFIG_USB_ETH_RNDIS=y
|
|
+CONFIG_USB_GADGETFS=m
|
|
+CONFIG_USB_FILE_STORAGE=m
|
|
+CONFIG_USB_FILE_STORAGE_TEST=y
|
|
+CONFIG_USB_G_SERIAL=m
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card support
|
|
+#
|
|
+# CONFIG_MMC is not set
|
|
+
|
|
+#
|
|
+# Real Time Clock
|
|
+#
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+# CONFIG_EXT2_FS is not set
|
|
+# CONFIG_EXT3_FS is not set
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+# CONFIG_FS_POSIX_ACL is not set
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+CONFIG_MINIX_FS=y
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+# CONFIG_INOTIFY is not set
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=m
|
|
+CONFIG_MSDOS_FS=m
|
|
+CONFIG_VFAT_FS=m
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+CONFIG_RAMFS=y
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+CONFIG_YAFFS_FS=y
|
|
+CONFIG_YAFFS_YAFFS1=y
|
|
+# CONFIG_YAFFS_DOES_ECC is not set
|
|
+CONFIG_YAFFS_YAFFS2=y
|
|
+CONFIG_YAFFS_AUTO_YAFFS2=y
|
|
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
|
|
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
|
|
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
|
|
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
|
|
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
|
|
+CONFIG_JFFS2_FS=y
|
|
+CONFIG_JFFS2_FS_DEBUG=0
|
|
+CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
+# CONFIG_JFFS2_SUMMARY is not set
|
|
+# CONFIG_JFFS2_FS_XATTR is not set
|
|
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
+CONFIG_JFFS2_ZLIB=y
|
|
+CONFIG_JFFS2_RTIME=y
|
|
+# CONFIG_JFFS2_RUBIN is not set
|
|
+CONFIG_CRAMFS=y
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+
|
|
+#
|
|
+# Network File Systems
|
|
+#
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+# CONFIG_NFS_V3_ACL is not set
|
|
+# CONFIG_NFS_V4 is not set
|
|
+# CONFIG_NFS_DIRECTIO is not set
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_ROOT_NFS=y
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+# CONFIG_RPCSEC_GSS_KRB5 is not set
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+# CONFIG_9P_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+# CONFIG_PARTITION_ADVANCED is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+
|
|
+#
|
|
+# Native Language Support
|
|
+#
|
|
+CONFIG_NLS=m
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=m
|
|
+# CONFIG_NLS_CODEPAGE_737 is not set
|
|
+# CONFIG_NLS_CODEPAGE_775 is not set
|
|
+CONFIG_NLS_CODEPAGE_850=m
|
|
+# CONFIG_NLS_CODEPAGE_852 is not set
|
|
+# CONFIG_NLS_CODEPAGE_855 is not set
|
|
+# CONFIG_NLS_CODEPAGE_857 is not set
|
|
+# CONFIG_NLS_CODEPAGE_860 is not set
|
|
+# CONFIG_NLS_CODEPAGE_861 is not set
|
|
+# CONFIG_NLS_CODEPAGE_862 is not set
|
|
+# CONFIG_NLS_CODEPAGE_863 is not set
|
|
+# CONFIG_NLS_CODEPAGE_864 is not set
|
|
+# CONFIG_NLS_CODEPAGE_865 is not set
|
|
+# CONFIG_NLS_CODEPAGE_866 is not set
|
|
+# CONFIG_NLS_CODEPAGE_869 is not set
|
|
+# CONFIG_NLS_CODEPAGE_936 is not set
|
|
+# CONFIG_NLS_CODEPAGE_950 is not set
|
|
+# CONFIG_NLS_CODEPAGE_932 is not set
|
|
+# CONFIG_NLS_CODEPAGE_949 is not set
|
|
+# CONFIG_NLS_CODEPAGE_874 is not set
|
|
+# CONFIG_NLS_ISO8859_8 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1250 is not set
|
|
+# CONFIG_NLS_CODEPAGE_1251 is not set
|
|
+# CONFIG_NLS_ASCII is not set
|
|
+CONFIG_NLS_ISO8859_1=m
|
|
+# CONFIG_NLS_ISO8859_2 is not set
|
|
+# CONFIG_NLS_ISO8859_3 is not set
|
|
+# CONFIG_NLS_ISO8859_4 is not set
|
|
+# CONFIG_NLS_ISO8859_5 is not set
|
|
+# CONFIG_NLS_ISO8859_6 is not set
|
|
+# CONFIG_NLS_ISO8859_7 is not set
|
|
+# CONFIG_NLS_ISO8859_9 is not set
|
|
+# CONFIG_NLS_ISO8859_13 is not set
|
|
+# CONFIG_NLS_ISO8859_14 is not set
|
|
+# CONFIG_NLS_ISO8859_15 is not set
|
|
+# CONFIG_NLS_KOI8_R is not set
|
|
+# CONFIG_NLS_KOI8_U is not set
|
|
+# CONFIG_NLS_UTF8 is not set
|
|
+
|
|
+#
|
|
+# Distributed Lock Manager
|
|
+#
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Profiling support
|
|
+#
|
|
+# CONFIG_PROFILING is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+# CONFIG_MAGIC_SYSRQ is not set
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+# CONFIG_DEBUG_KERNEL is not set
|
|
+CONFIG_LOG_BUF_SHIFT=14
|
|
+CONFIG_DEBUG_BUGVERBOSE=y
|
|
+CONFIG_FRAME_POINTER=y
|
|
+# CONFIG_DEBUG_USER is not set
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+
|
|
+#
|
|
+# Cryptographic options
|
|
+#
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=m
|
|
+CONFIG_CRYPTO_BLKCIPHER=m
|
|
+CONFIG_CRYPTO_MANAGER=m
|
|
+# CONFIG_CRYPTO_HMAC is not set
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+# CONFIG_CRYPTO_MD5 is not set
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+CONFIG_CRYPTO_ECB=m
|
|
+CONFIG_CRYPTO_CBC=m
|
|
+CONFIG_CRYPTO_PCBC=m
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+# CONFIG_CRYPTO_DES is not set
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+CONFIG_CRYPTO_AES=m
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+CONFIG_CRYPTO_ARC4=m
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_DEFLATE is not set
|
|
+CONFIG_CRYPTO_MICHAEL_MIC=m
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
+
|
|
+#
|
|
+# Hardware crypto devices
|
|
+#
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_ZLIB_DEFLATE=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/kafa_defconfig linux-2.6/arch/arm/configs/kafa_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/kafa_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/kafa_defconfig 2007-12-31 10:43:35.000000000 +0200
|
|
@@ -587,14 +587,14 @@
|
|
#
|
|
# I2C Algorithms
|
|
#
|
|
-# CONFIG_I2C_ALGOBIT is not set
|
|
+CONFIG_I2C_ALGOBIT=y
|
|
# CONFIG_I2C_ALGOPCF is not set
|
|
# CONFIG_I2C_ALGOPCA is not set
|
|
|
|
#
|
|
# I2C Hardware Bus support
|
|
#
|
|
-CONFIG_I2C_AT91=y
|
|
+CONFIG_I2C_GPIO=y
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
# CONFIG_I2C_STUB is not set
|
|
# CONFIG_I2C_PCA_ISA is not set
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/kb9202_defconfig linux-2.6/arch/arm/configs/kb9202_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/kb9202_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/kb9202_defconfig 2007-12-31 10:43:35.000000000 +0200
|
|
@@ -1,19 +1,31 @@
|
|
#
|
|
# Automatically generated make config: don't edit
|
|
-# Linux kernel version: 2.6.13-rc2
|
|
-# Sun Aug 14 19:26:59 2005
|
|
+# Linux kernel version: 2.6.21
|
|
+# Mon May 7 11:43:14 2007
|
|
#
|
|
CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
+# CONFIG_GENERIC_TIME is not set
|
|
CONFIG_MMU=y
|
|
-CONFIG_UID16=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
+CONFIG_VECTORS_BASE=0xffff0000
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
|
|
#
|
|
# Code maturity level options
|
|
#
|
|
-# CONFIG_EXPERIMENTAL is not set
|
|
-CONFIG_CLEAN_COMPILE=y
|
|
+CONFIG_EXPERIMENTAL=y
|
|
CONFIG_BROKEN_ON_SMP=y
|
|
CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
|
|
@@ -21,54 +33,103 @@
|
|
# General setup
|
|
#
|
|
CONFIG_LOCALVERSION=""
|
|
-# CONFIG_SWAP is not set
|
|
-# CONFIG_SYSVIPC is not set
|
|
-# CONFIG_BSD_PROCESS_ACCT is not set
|
|
+CONFIG_LOCALVERSION_AUTO=y
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+# CONFIG_IPC_NS is not set
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+CONFIG_POSIX_MQUEUE=y
|
|
+CONFIG_BSD_PROCESS_ACCT=y
|
|
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_UTS_NS is not set
|
|
+CONFIG_AUDIT=y
|
|
+CONFIG_IKCONFIG=y
|
|
+CONFIG_IKCONFIG_PROC=y
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+# CONFIG_RELAY is not set
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
+CONFIG_INITRAMFS_SOURCE=""
|
|
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
|
CONFIG_SYSCTL=y
|
|
-# CONFIG_AUDIT is not set
|
|
-CONFIG_HOTPLUG=y
|
|
-# CONFIG_KOBJECT_UEVENT is not set
|
|
-# CONFIG_IKCONFIG is not set
|
|
# CONFIG_EMBEDDED is not set
|
|
+CONFIG_UID16=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
CONFIG_KALLSYMS=y
|
|
# CONFIG_KALLSYMS_ALL is not set
|
|
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_KALLSYMS_EXTRA_PASS=y
|
|
+CONFIG_HOTPLUG=y
|
|
CONFIG_PRINTK=y
|
|
CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
CONFIG_BASE_FULL=y
|
|
CONFIG_FUTEX=y
|
|
CONFIG_EPOLL=y
|
|
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
CONFIG_SHMEM=y
|
|
-CONFIG_CC_ALIGN_FUNCTIONS=0
|
|
-CONFIG_CC_ALIGN_LABELS=0
|
|
-CONFIG_CC_ALIGN_LOOPS=0
|
|
-CONFIG_CC_ALIGN_JUMPS=0
|
|
+CONFIG_SLAB=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_RT_MUTEXES=y
|
|
# CONFIG_TINY_SHMEM is not set
|
|
CONFIG_BASE_SMALL=0
|
|
+# CONFIG_SLOB is not set
|
|
|
|
#
|
|
# Loadable module support
|
|
#
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
-CONFIG_OBSOLETE_MODPARM=y
|
|
-# CONFIG_MODULE_SRCVERSION_ALL is not set
|
|
+# CONFIG_MODULE_FORCE_UNLOAD is not set
|
|
+CONFIG_MODVERSIONS=y
|
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
|
CONFIG_KMOD=y
|
|
|
|
#
|
|
+# Block layer
|
|
+#
|
|
+CONFIG_BLOCK=y
|
|
+CONFIG_LBD=y
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+# CONFIG_LSF is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+# CONFIG_DEFAULT_AS is not set
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+CONFIG_DEFAULT_CFQ=y
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="cfq"
|
|
+
|
|
+#
|
|
# System Type
|
|
#
|
|
+# CONFIG_ARCH_AAEC2000 is not set
|
|
+# CONFIG_ARCH_INTEGRATOR is not set
|
|
+# CONFIG_ARCH_REALVIEW is not set
|
|
+# CONFIG_ARCH_VERSATILE is not set
|
|
+CONFIG_ARCH_AT91=y
|
|
# CONFIG_ARCH_CLPS7500 is not set
|
|
# CONFIG_ARCH_CLPS711X is not set
|
|
# CONFIG_ARCH_CO285 is not set
|
|
# CONFIG_ARCH_EBSA110 is not set
|
|
+# CONFIG_ARCH_EP93XX is not set
|
|
# CONFIG_ARCH_FOOTBRIDGE is not set
|
|
-# CONFIG_ARCH_INTEGRATOR is not set
|
|
-# CONFIG_ARCH_IOP3XX is not set
|
|
+# CONFIG_ARCH_NETX is not set
|
|
+# CONFIG_ARCH_H720X is not set
|
|
+# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP32X is not set
|
|
+# CONFIG_ARCH_IOP33X is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
# CONFIG_ARCH_IXP4XX is not set
|
|
# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP23XX is not set
|
|
# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_PNX4008 is not set
|
|
# CONFIG_ARCH_PXA is not set
|
|
# CONFIG_ARCH_RPC is not set
|
|
# CONFIG_ARCH_SA1100 is not set
|
|
@@ -76,34 +137,52 @@
|
|
# CONFIG_ARCH_SHARK is not set
|
|
# CONFIG_ARCH_LH7A40X is not set
|
|
# CONFIG_ARCH_OMAP is not set
|
|
-# CONFIG_ARCH_VERSATILE is not set
|
|
-# CONFIG_ARCH_IMX is not set
|
|
-# CONFIG_ARCH_H720X is not set
|
|
-# CONFIG_ARCH_AAEC2000 is not set
|
|
-CONFIG_ARCH_AT91=y
|
|
+
|
|
+#
|
|
+# Atmel AT91 System-on-Chip
|
|
+#
|
|
CONFIG_ARCH_AT91RM9200=y
|
|
+# CONFIG_ARCH_AT91SAM9260 is not set
|
|
+# CONFIG_ARCH_AT91SAM9261 is not set
|
|
+# CONFIG_ARCH_AT91SAM9263 is not set
|
|
|
|
#
|
|
-# AT91RM9200 Implementations
|
|
+# AT91RM9200 Board Type
|
|
#
|
|
+# CONFIG_MACH_ONEARM is not set
|
|
# CONFIG_ARCH_AT91RM9200DK is not set
|
|
# CONFIG_MACH_AT91RM9200EK is not set
|
|
# CONFIG_MACH_CSB337 is not set
|
|
# CONFIG_MACH_CSB637 is not set
|
|
# CONFIG_MACH_CARMEVA is not set
|
|
+# CONFIG_MACH_ATEB9200 is not set
|
|
CONFIG_MACH_KB9200=y
|
|
+# CONFIG_MACH_KAFA is not set
|
|
+# CONFIG_MACH_CHUB is not set
|
|
+
|
|
+#
|
|
+# AT91 Board Options
|
|
+#
|
|
+
|
|
+#
|
|
+# AT91 Feature Selections
|
|
+#
|
|
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
|
|
#
|
|
# Processor Type
|
|
#
|
|
CONFIG_CPU_32=y
|
|
CONFIG_CPU_ARM920T=y
|
|
-CONFIG_CPU_32v4=y
|
|
+CONFIG_CPU_32v4T=y
|
|
CONFIG_CPU_ABRT_EV4T=y
|
|
CONFIG_CPU_CACHE_V4WT=y
|
|
CONFIG_CPU_CACHE_VIVT=y
|
|
CONFIG_CPU_COPY_V4WB=y
|
|
CONFIG_CPU_TLB_V4WBI=y
|
|
+CONFIG_CPU_CP15=y
|
|
+CONFIG_CPU_CP15_MMU=y
|
|
|
|
#
|
|
# Processor Features
|
|
@@ -112,24 +191,44 @@
|
|
# CONFIG_CPU_ICACHE_DISABLE is not set
|
|
# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
|
|
#
|
|
# Bus support
|
|
#
|
|
-CONFIG_ISA_DMA_API=y
|
|
|
|
#
|
|
# PCCARD (PCMCIA/CardBus) support
|
|
#
|
|
-# CONFIG_PCCARD is not set
|
|
+CONFIG_PCCARD=m
|
|
+# CONFIG_PCMCIA_DEBUG is not set
|
|
+CONFIG_PCMCIA=m
|
|
+CONFIG_PCMCIA_LOAD_CIS=y
|
|
+CONFIG_PCMCIA_IOCTL=y
|
|
+
|
|
+#
|
|
+# PC-card bridges
|
|
+#
|
|
+# CONFIG_AT91_CF is not set
|
|
|
|
#
|
|
# Kernel Features
|
|
#
|
|
+# CONFIG_PREEMPT is not set
|
|
# CONFIG_NO_IDLE_HZ is not set
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_AEABI is not set
|
|
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
CONFIG_FLATMEM=y
|
|
CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
# CONFIG_LEDS is not set
|
|
CONFIG_ALIGNMENT_TRAP=y
|
|
|
|
@@ -138,8 +237,10 @@
|
|
#
|
|
CONFIG_ZBOOT_ROM_TEXT=0x10000000
|
|
CONFIG_ZBOOT_ROM_BSS=0x20040000
|
|
-CONFIG_ZBOOT_ROM=y
|
|
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
|
|
+# CONFIG_ZBOOT_ROM is not set
|
|
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
|
|
+# CONFIG_XIP_KERNEL is not set
|
|
+# CONFIG_KEXEC is not set
|
|
|
|
#
|
|
# Floating point emulation
|
|
@@ -150,6 +251,7 @@
|
|
#
|
|
CONFIG_FPE_NWFPE=y
|
|
# CONFIG_FPE_NWFPE_XP is not set
|
|
+# CONFIG_FPE_FASTFPE is not set
|
|
|
|
#
|
|
# Userspace binary formats
|
|
@@ -165,6 +267,96 @@
|
|
# CONFIG_PM is not set
|
|
|
|
#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+# CONFIG_NETDEBUG is not set
|
|
+CONFIG_PACKET=y
|
|
+# CONFIG_PACKET_MMAP is not set
|
|
+CONFIG_UNIX=y
|
|
+# CONFIG_NET_KEY is not set
|
|
+CONFIG_INET=y
|
|
+CONFIG_IP_MULTICAST=y
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+CONFIG_IP_PNP=y
|
|
+# CONFIG_IP_PNP_DHCP is not set
|
|
+# CONFIG_IP_PNP_BOOTP is not set
|
|
+# CONFIG_IP_PNP_RARP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_IP_MROUTE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+# CONFIG_INET_DIAG is not set
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+
|
|
+#
|
|
+# DCCP Configuration (EXPERIMENTAL)
|
|
+#
|
|
+# CONFIG_IP_DCCP is not set
|
|
+
|
|
+#
|
|
+# SCTP Configuration (EXPERIMENTAL)
|
|
+#
|
|
+CONFIG_IP_SCTP=m
|
|
+# CONFIG_SCTP_DBG_MSG is not set
|
|
+# CONFIG_SCTP_DBG_OBJCNT is not set
|
|
+# CONFIG_SCTP_HMAC_NONE is not set
|
|
+# CONFIG_SCTP_HMAC_SHA1 is not set
|
|
+CONFIG_SCTP_HMAC_MD5=y
|
|
+
|
|
+#
|
|
+# TIPC Configuration (EXPERIMENTAL)
|
|
+#
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+
|
|
+#
|
|
+# QoS and/or fair queueing
|
|
+#
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+
|
|
+#
|
|
# Device Drivers
|
|
#
|
|
|
|
@@ -173,13 +365,95 @@
|
|
#
|
|
CONFIG_STANDALONE=y
|
|
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
-# CONFIG_FW_LOADER is not set
|
|
-CONFIG_DEBUG_DRIVER=y
|
|
+CONFIG_FW_LOADER=y
|
|
+# CONFIG_DEBUG_DRIVER is not set
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+
|
|
+#
|
|
+# Connector - unified userspace <-> kernelspace linker
|
|
+#
|
|
+# CONFIG_CONNECTOR is not set
|
|
|
|
#
|
|
# Memory Technology Devices (MTD)
|
|
#
|
|
-# CONFIG_MTD is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+CONFIG_MTD_CONCAT=y
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+CONFIG_MTD_CMDLINE_PARTS=y
|
|
+# CONFIG_MTD_AFS_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+CONFIG_MTD_COMPLEX_MAPPINGS=y
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+# CONFIG_MTD_BLOCK2MTD is not set
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+
|
|
+#
|
|
+# NAND Flash Device Drivers
|
|
+#
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+CONFIG_MTD_NAND_AT91=y
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+
|
|
+#
|
|
+# OneNAND Flash Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
|
|
#
|
|
# Parallel port support
|
|
@@ -189,6 +463,7 @@
|
|
#
|
|
# Plug and Play support
|
|
#
|
|
+# CONFIG_PNPACPI is not set
|
|
|
|
#
|
|
# Block devices
|
|
@@ -196,28 +471,27 @@
|
|
# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
CONFIG_BLK_DEV_LOOP=y
|
|
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
-CONFIG_BLK_DEV_NBD=y
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
# CONFIG_BLK_DEV_UB is not set
|
|
CONFIG_BLK_DEV_RAM=y
|
|
CONFIG_BLK_DEV_RAM_COUNT=16
|
|
-CONFIG_BLK_DEV_RAM_SIZE=4096
|
|
-CONFIG_BLK_DEV_INITRD=y
|
|
-CONFIG_INITRAMFS_SOURCE=""
|
|
+CONFIG_BLK_DEV_RAM_SIZE=16384
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
|
|
#
|
|
-# IO Schedulers
|
|
+# ATA/ATAPI/MFM/RLL support
|
|
#
|
|
-CONFIG_IOSCHED_NOOP=y
|
|
-CONFIG_IOSCHED_AS=y
|
|
-CONFIG_IOSCHED_DEADLINE=y
|
|
-CONFIG_IOSCHED_CFQ=y
|
|
-# CONFIG_ATA_OVER_ETH is not set
|
|
+# CONFIG_IDE is not set
|
|
|
|
#
|
|
# SCSI device support
|
|
#
|
|
+# CONFIG_RAID_ATTRS is not set
|
|
CONFIG_SCSI=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
CONFIG_SCSI_PROC_FS=y
|
|
|
|
#
|
|
@@ -233,97 +507,61 @@
|
|
#
|
|
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
#
|
|
-# CONFIG_SCSI_MULTI_LUN is not set
|
|
-# CONFIG_SCSI_CONSTANTS is not set
|
|
-# CONFIG_SCSI_LOGGING is not set
|
|
+CONFIG_SCSI_MULTI_LUN=y
|
|
+CONFIG_SCSI_CONSTANTS=y
|
|
+CONFIG_SCSI_LOGGING=y
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
|
|
#
|
|
-# SCSI Transport Attributes
|
|
+# SCSI Transports
|
|
#
|
|
-# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+CONFIG_SCSI_SPI_ATTRS=m
|
|
# CONFIG_SCSI_FC_ATTRS is not set
|
|
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
|
|
#
|
|
# SCSI low-level drivers
|
|
#
|
|
-# CONFIG_SCSI_SATA is not set
|
|
+# CONFIG_ISCSI_TCP is not set
|
|
# CONFIG_SCSI_DEBUG is not set
|
|
|
|
#
|
|
-# Multi-device support (RAID and LVM)
|
|
-#
|
|
-# CONFIG_MD is not set
|
|
-
|
|
-#
|
|
-# Fusion MPT device support
|
|
+# PCMCIA SCSI adapter support
|
|
#
|
|
-# CONFIG_FUSION is not set
|
|
+# CONFIG_PCMCIA_AHA152X is not set
|
|
+# CONFIG_PCMCIA_FDOMAIN is not set
|
|
+# CONFIG_PCMCIA_NINJA_SCSI is not set
|
|
+# CONFIG_PCMCIA_QLOGIC is not set
|
|
+# CONFIG_PCMCIA_SYM53C500 is not set
|
|
|
|
#
|
|
-# IEEE 1394 (FireWire) support
|
|
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
|
|
#
|
|
+# CONFIG_ATA is not set
|
|
|
|
#
|
|
-# I2O device support
|
|
+# Multi-device support (RAID and LVM)
|
|
#
|
|
+# CONFIG_MD is not set
|
|
|
|
#
|
|
-# Networking support
|
|
+# Fusion MPT device support
|
|
#
|
|
-CONFIG_NET=y
|
|
+# CONFIG_FUSION is not set
|
|
|
|
#
|
|
-# Networking options
|
|
+# IEEE 1394 (FireWire) support
|
|
#
|
|
-CONFIG_PACKET=y
|
|
-# CONFIG_PACKET_MMAP is not set
|
|
-CONFIG_UNIX=y
|
|
-# CONFIG_NET_KEY is not set
|
|
-CONFIG_INET=y
|
|
-CONFIG_IP_MULTICAST=y
|
|
-# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
-CONFIG_IP_FIB_HASH=y
|
|
-CONFIG_IP_PNP=y
|
|
-CONFIG_IP_PNP_DHCP=y
|
|
-# CONFIG_IP_PNP_BOOTP is not set
|
|
-# CONFIG_IP_PNP_RARP is not set
|
|
-# CONFIG_NET_IPIP is not set
|
|
-# CONFIG_NET_IPGRE is not set
|
|
-# CONFIG_IP_MROUTE is not set
|
|
-# CONFIG_SYN_COOKIES is not set
|
|
-# CONFIG_INET_AH is not set
|
|
-# CONFIG_INET_ESP is not set
|
|
-# CONFIG_INET_IPCOMP is not set
|
|
-# CONFIG_INET_TUNNEL is not set
|
|
-# CONFIG_IP_TCPDIAG is not set
|
|
-# CONFIG_IP_TCPDIAG_IPV6 is not set
|
|
-# CONFIG_TCP_CONG_ADVANCED is not set
|
|
-CONFIG_TCP_CONG_BIC=y
|
|
-# CONFIG_IPV6 is not set
|
|
-# CONFIG_NETFILTER is not set
|
|
-# CONFIG_BRIDGE is not set
|
|
-# CONFIG_VLAN_8021Q is not set
|
|
-# CONFIG_DECNET is not set
|
|
-# CONFIG_LLC2 is not set
|
|
-# CONFIG_IPX is not set
|
|
-# CONFIG_ATALK is not set
|
|
|
|
#
|
|
-# QoS and/or fair queueing
|
|
+# I2O device support
|
|
#
|
|
-# CONFIG_NET_SCHED is not set
|
|
-# CONFIG_NET_CLS_ROUTE is not set
|
|
|
|
#
|
|
-# Network testing
|
|
+# Network device support
|
|
#
|
|
-# CONFIG_NET_PKTGEN is not set
|
|
-# CONFIG_NETPOLL is not set
|
|
-# CONFIG_NET_POLL_CONTROLLER is not set
|
|
-# CONFIG_HAMRADIO is not set
|
|
-# CONFIG_IRDA is not set
|
|
-# CONFIG_BT is not set
|
|
CONFIG_NETDEVICES=y
|
|
# CONFIG_DUMMY is not set
|
|
# CONFIG_BONDING is not set
|
|
@@ -331,6 +569,11 @@
|
|
# CONFIG_TUN is not set
|
|
|
|
#
|
|
+# PHY device support
|
|
+#
|
|
+# CONFIG_PHYLIB is not set
|
|
+
|
|
+#
|
|
# Ethernet (10 or 100Mbit)
|
|
#
|
|
CONFIG_NET_ETHERNET=y
|
|
@@ -357,11 +600,20 @@
|
|
# CONFIG_NET_RADIO is not set
|
|
|
|
#
|
|
+# PCMCIA network device support
|
|
+#
|
|
+# CONFIG_NET_PCMCIA is not set
|
|
+
|
|
+#
|
|
# Wan interfaces
|
|
#
|
|
# CONFIG_WAN is not set
|
|
# CONFIG_PPP is not set
|
|
# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
|
|
#
|
|
# ISDN subsystem
|
|
@@ -372,6 +624,7 @@
|
|
# Input device support
|
|
#
|
|
CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
|
|
#
|
|
# Userland interfaces
|
|
@@ -397,9 +650,7 @@
|
|
#
|
|
# Hardware I/O ports
|
|
#
|
|
-CONFIG_SERIO=y
|
|
-# CONFIG_SERIO_SERPORT is not set
|
|
-# CONFIG_SERIO_RAW is not set
|
|
+# CONFIG_SERIO is not set
|
|
# CONFIG_GAMEPORT is not set
|
|
|
|
#
|
|
@@ -408,6 +659,7 @@
|
|
CONFIG_VT=y
|
|
CONFIG_VT_CONSOLE=y
|
|
CONFIG_HW_CONSOLE=y
|
|
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
|
# CONFIG_SERIAL_NONSTANDARD is not set
|
|
|
|
#
|
|
@@ -420,11 +672,11 @@
|
|
#
|
|
CONFIG_SERIAL_ATMEL=y
|
|
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
CONFIG_SERIAL_CORE=y
|
|
CONFIG_SERIAL_CORE_CONSOLE=y
|
|
CONFIG_UNIX98_PTYS=y
|
|
-CONFIG_LEGACY_PTYS=y
|
|
-CONFIG_LEGACY_PTY_COUNT=256
|
|
+# CONFIG_LEGACY_PTYS is not set
|
|
|
|
#
|
|
# IPMI
|
|
@@ -435,21 +687,23 @@
|
|
# Watchdog Cards
|
|
#
|
|
# CONFIG_WATCHDOG is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
# CONFIG_NVRAM is not set
|
|
-# CONFIG_RTC is not set
|
|
-# CONFIG_AT91RM9200_RTC is not set
|
|
# CONFIG_DTLK is not set
|
|
# CONFIG_R3964 is not set
|
|
|
|
#
|
|
-# Ftape, the floppy tape device driver
|
|
+# PCMCIA character devices
|
|
#
|
|
+# CONFIG_SYNCLINK_CS is not set
|
|
+# CONFIG_CARDMAN_4000 is not set
|
|
+# CONFIG_CARDMAN_4040 is not set
|
|
# CONFIG_RAW_DRIVER is not set
|
|
|
|
#
|
|
# TPM devices
|
|
#
|
|
-# CONFIG_AT91_SPI is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
|
|
#
|
|
# I2C support
|
|
@@ -457,10 +711,50 @@
|
|
# CONFIG_I2C is not set
|
|
|
|
#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+
|
|
+#
|
|
+# Dallas's 1-wire bus
|
|
+#
|
|
+# CONFIG_W1 is not set
|
|
+
|
|
+#
|
|
+# Hardware Monitoring support
|
|
+#
|
|
+CONFIG_HWMON=y
|
|
+# CONFIG_HWMON_VID is not set
|
|
+# CONFIG_SENSORS_ABITUGURU is not set
|
|
+# CONFIG_SENSORS_F71805F is not set
|
|
+# CONFIG_SENSORS_PC87427 is not set
|
|
+# CONFIG_SENSORS_VT1211 is not set
|
|
+CONFIG_HWMON_DEBUG_CHIP=y
|
|
+
|
|
+#
|
|
# Misc devices
|
|
#
|
|
|
|
#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+
|
|
+#
|
|
+# LED devices
|
|
+#
|
|
+# CONFIG_NEW_LEDS is not set
|
|
+
|
|
+#
|
|
+# LED drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# LED Triggers
|
|
+#
|
|
+
|
|
+#
|
|
# Multimedia devices
|
|
#
|
|
# CONFIG_VIDEO_DEV is not set
|
|
@@ -469,17 +763,57 @@
|
|
# Digital Video Broadcasting Devices
|
|
#
|
|
# CONFIG_DVB is not set
|
|
+# CONFIG_USB_DABUSB is not set
|
|
|
|
#
|
|
# Graphics support
|
|
#
|
|
-# CONFIG_FB is not set
|
|
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
|
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
|
+# CONFIG_LCD_CLASS_DEVICE is not set
|
|
+CONFIG_BACKLIGHT_KB920x=y
|
|
+CONFIG_FB=y
|
|
+# CONFIG_FIRMWARE_EDID is not set
|
|
+# CONFIG_FB_DDC is not set
|
|
+CONFIG_FB_CFB_FILLRECT=y
|
|
+CONFIG_FB_CFB_COPYAREA=y
|
|
+CONFIG_FB_CFB_IMAGEBLIT=y
|
|
+# CONFIG_FB_SVGALIB is not set
|
|
+# CONFIG_FB_MACMODES is not set
|
|
+# CONFIG_FB_BACKLIGHT is not set
|
|
+CONFIG_FB_MODE_HELPERS=y
|
|
+CONFIG_FB_TILEBLITTING=y
|
|
+
|
|
+#
|
|
+# Frame buffer hardware drivers
|
|
+#
|
|
+CONFIG_FB_S1D15605=y
|
|
+# CONFIG_FB_S1D13XXX is not set
|
|
+# CONFIG_FB_VIRTUAL is not set
|
|
|
|
#
|
|
# Console display driver support
|
|
#
|
|
# CONFIG_VGA_CONSOLE is not set
|
|
CONFIG_DUMMY_CONSOLE=y
|
|
+CONFIG_FRAMEBUFFER_CONSOLE=y
|
|
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
|
+CONFIG_FONTS=y
|
|
+# CONFIG_FONT_8x8 is not set
|
|
+# CONFIG_FONT_8x16 is not set
|
|
+# CONFIG_FONT_6x11 is not set
|
|
+# CONFIG_FONT_7x14 is not set
|
|
+# CONFIG_FONT_PEARL_8x8 is not set
|
|
+# CONFIG_FONT_ACORN_8x8 is not set
|
|
+CONFIG_FONT_MINI_4x6=y
|
|
+# CONFIG_FONT_SUN8x16 is not set
|
|
+# CONFIG_FONT_SUN12x22 is not set
|
|
+# CONFIG_FONT_10x18 is not set
|
|
+
|
|
+#
|
|
+# Logo configuration
|
|
+#
|
|
+# CONFIG_LOGO is not set
|
|
|
|
#
|
|
# Sound
|
|
@@ -487,82 +821,98 @@
|
|
# CONFIG_SOUND is not set
|
|
|
|
#
|
|
+# HID Devices
|
|
+#
|
|
+CONFIG_HID=y
|
|
+# CONFIG_HID_DEBUG is not set
|
|
+
|
|
+#
|
|
# USB support
|
|
#
|
|
CONFIG_USB_ARCH_HAS_HCD=y
|
|
CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
CONFIG_USB=y
|
|
-CONFIG_USB_DEBUG=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
|
|
#
|
|
# Miscellaneous USB options
|
|
#
|
|
CONFIG_USB_DEVICEFS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
|
|
#
|
|
# USB Host Controller Drivers
|
|
#
|
|
# CONFIG_USB_ISP116X_HCD is not set
|
|
CONFIG_USB_OHCI_HCD=y
|
|
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
# CONFIG_USB_SL811_HCD is not set
|
|
|
|
#
|
|
# USB Device Class drivers
|
|
#
|
|
-# CONFIG_USB_BLUETOOTH_TTY is not set
|
|
# CONFIG_USB_ACM is not set
|
|
# CONFIG_USB_PRINTER is not set
|
|
|
|
#
|
|
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
#
|
|
CONFIG_USB_STORAGE=y
|
|
-CONFIG_USB_STORAGE_DEBUG=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
# CONFIG_USB_STORAGE_FREECOM is not set
|
|
# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+CONFIG_USB_LIBUSUAL=y
|
|
|
|
#
|
|
# USB Input Devices
|
|
#
|
|
-# CONFIG_USB_HID is not set
|
|
-
|
|
-#
|
|
-# USB HID Boot Protocol drivers
|
|
-#
|
|
-# CONFIG_USB_KBD is not set
|
|
-# CONFIG_USB_MOUSE is not set
|
|
+CONFIG_USB_HID=y
|
|
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
|
|
+# CONFIG_HID_FF is not set
|
|
+# CONFIG_USB_HIDDEV is not set
|
|
# CONFIG_USB_AIPTEK is not set
|
|
# CONFIG_USB_WACOM is not set
|
|
# CONFIG_USB_ACECAD is not set
|
|
# CONFIG_USB_KBTAB is not set
|
|
# CONFIG_USB_POWERMATE is not set
|
|
-# CONFIG_USB_MTOUCH is not set
|
|
-# CONFIG_USB_ITMTOUCH is not set
|
|
-# CONFIG_USB_EGALAX is not set
|
|
+# CONFIG_USB_TOUCHSCREEN is not set
|
|
+# CONFIG_USB_YEALINK is not set
|
|
# CONFIG_USB_XPAD is not set
|
|
# CONFIG_USB_ATI_REMOTE is not set
|
|
+# CONFIG_USB_ATI_REMOTE2 is not set
|
|
+# CONFIG_USB_KEYSPAN_REMOTE is not set
|
|
+# CONFIG_USB_APPLETOUCH is not set
|
|
+# CONFIG_USB_GTCO is not set
|
|
|
|
#
|
|
# USB Imaging devices
|
|
#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
# CONFIG_USB_MICROTEK is not set
|
|
|
|
#
|
|
-# USB Multimedia devices
|
|
-#
|
|
-# CONFIG_USB_DABUSB is not set
|
|
-
|
|
-#
|
|
-# Video4Linux support is needed for USB Multimedia device support
|
|
-#
|
|
-
|
|
-#
|
|
# USB Network Adapters
|
|
#
|
|
+# CONFIG_USB_CATC is not set
|
|
# CONFIG_USB_KAWETH is not set
|
|
# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET_MII is not set
|
|
# CONFIG_USB_USBNET is not set
|
|
# CONFIG_USB_MON is not set
|
|
|
|
@@ -580,12 +930,23 @@
|
|
#
|
|
# CONFIG_USB_EMI62 is not set
|
|
# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
# CONFIG_USB_CYTHERM is not set
|
|
-# CONFIG_USB_PHIDGETKIT is not set
|
|
-# CONFIG_USB_PHIDGETSERVO is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+# CONFIG_USB_TEST is not set
|
|
|
|
#
|
|
# USB DSL modem support
|
|
@@ -599,36 +960,51 @@
|
|
#
|
|
# MMC/SD Card support
|
|
#
|
|
-# CONFIG_MMC is not set
|
|
+CONFIG_MMC=y
|
|
+# CONFIG_MMC_DEBUG is not set
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_AT91=y
|
|
+
|
|
+#
|
|
+# Real Time Clock
|
|
+#
|
|
+CONFIG_RTC_LIB=y
|
|
+# CONFIG_RTC_CLASS is not set
|
|
|
|
#
|
|
# File systems
|
|
#
|
|
CONFIG_EXT2_FS=y
|
|
CONFIG_EXT2_FS_XATTR=y
|
|
-# CONFIG_EXT2_FS_POSIX_ACL is not set
|
|
-# CONFIG_EXT2_FS_SECURITY is not set
|
|
+CONFIG_EXT2_FS_POSIX_ACL=y
|
|
+CONFIG_EXT2_FS_SECURITY=y
|
|
# CONFIG_EXT2_FS_XIP is not set
|
|
CONFIG_EXT3_FS=y
|
|
CONFIG_EXT3_FS_XATTR=y
|
|
-# CONFIG_EXT3_FS_POSIX_ACL is not set
|
|
-# CONFIG_EXT3_FS_SECURITY is not set
|
|
+CONFIG_EXT3_FS_POSIX_ACL=y
|
|
+CONFIG_EXT3_FS_SECURITY=y
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
CONFIG_JBD=y
|
|
# CONFIG_JBD_DEBUG is not set
|
|
CONFIG_FS_MBCACHE=y
|
|
# CONFIG_REISERFS_FS is not set
|
|
# CONFIG_JFS_FS is not set
|
|
-
|
|
-#
|
|
-# XFS support
|
|
-#
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
# CONFIG_MINIX_FS is not set
|
|
# CONFIG_ROMFS_FS is not set
|
|
-# CONFIG_QUOTA is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+CONFIG_QUOTA=y
|
|
+# CONFIG_QFMT_V1 is not set
|
|
+CONFIG_QFMT_V2=y
|
|
+CONFIG_QUOTACTL=y
|
|
CONFIG_DNOTIFY=y
|
|
-CONFIG_AUTOFS_FS=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
CONFIG_AUTOFS4_FS=y
|
|
+# CONFIG_FUSE_FS is not set
|
|
|
|
#
|
|
# CD-ROM/DVD Filesystems
|
|
@@ -643,25 +1019,40 @@
|
|
CONFIG_MSDOS_FS=y
|
|
CONFIG_VFAT_FS=y
|
|
CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
|
|
# CONFIG_NTFS_FS is not set
|
|
|
|
#
|
|
# Pseudo filesystems
|
|
#
|
|
CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
CONFIG_SYSFS=y
|
|
-CONFIG_DEVPTS_FS_XATTR=y
|
|
-# CONFIG_DEVPTS_FS_SECURITY is not set
|
|
CONFIG_TMPFS=y
|
|
-# CONFIG_TMPFS_XATTR is not set
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
# CONFIG_HUGETLB_PAGE is not set
|
|
CONFIG_RAMFS=y
|
|
+CONFIG_CONFIGFS_FS=y
|
|
|
|
#
|
|
# Miscellaneous filesystems
|
|
#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+CONFIG_JFFS2_FS=y
|
|
+CONFIG_JFFS2_FS_DEBUG=0
|
|
+CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
+# CONFIG_JFFS2_SUMMARY is not set
|
|
+# CONFIG_JFFS2_FS_XATTR is not set
|
|
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
+CONFIG_JFFS2_ZLIB=y
|
|
+CONFIG_JFFS2_RTIME=y
|
|
+# CONFIG_JFFS2_RUBIN is not set
|
|
# CONFIG_CRAMFS is not set
|
|
# CONFIG_VXFS_FS is not set
|
|
# CONFIG_HPFS_FS is not set
|
|
@@ -675,16 +1066,23 @@
|
|
CONFIG_NFS_FS=y
|
|
CONFIG_NFS_V3=y
|
|
# CONFIG_NFS_V3_ACL is not set
|
|
+CONFIG_NFS_V4=y
|
|
+# CONFIG_NFS_DIRECTIO is not set
|
|
# CONFIG_NFSD is not set
|
|
CONFIG_ROOT_NFS=y
|
|
CONFIG_LOCKD=y
|
|
CONFIG_LOCKD_V4=y
|
|
CONFIG_NFS_COMMON=y
|
|
CONFIG_SUNRPC=y
|
|
+CONFIG_SUNRPC_GSS=y
|
|
+CONFIG_RPCSEC_GSS_KRB5=y
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
# CONFIG_SMB_FS is not set
|
|
# CONFIG_CIFS is not set
|
|
# CONFIG_NCP_FS is not set
|
|
# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+# CONFIG_9P_FS is not set
|
|
|
|
#
|
|
# Partition Types
|
|
@@ -734,26 +1132,51 @@
|
|
# CONFIG_NLS_ISO8859_15 is not set
|
|
# CONFIG_NLS_KOI8_R is not set
|
|
# CONFIG_NLS_KOI8_U is not set
|
|
-# CONFIG_NLS_UTF8 is not set
|
|
+CONFIG_NLS_UTF8=y
|
|
+
|
|
+#
|
|
+# Distributed Lock Manager
|
|
+#
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Profiling support
|
|
+#
|
|
+# CONFIG_PROFILING is not set
|
|
|
|
#
|
|
# Kernel hacking
|
|
#
|
|
# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+# CONFIG_UNUSED_SYMBOLS is not set
|
|
+# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
CONFIG_DEBUG_KERNEL=y
|
|
-# CONFIG_MAGIC_SYSRQ is not set
|
|
-CONFIG_LOG_BUF_SHIFT=14
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
+CONFIG_LOG_BUF_SHIFT=17
|
|
+CONFIG_DETECT_SOFTLOCKUP=y
|
|
# CONFIG_SCHEDSTATS is not set
|
|
+# CONFIG_TIMER_STATS is not set
|
|
# CONFIG_DEBUG_SLAB is not set
|
|
-# CONFIG_DEBUG_SPINLOCK is not set
|
|
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
+# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
+# CONFIG_RT_MUTEX_TESTER is not set
|
|
+CONFIG_DEBUG_SPINLOCK=y
|
|
+# CONFIG_DEBUG_MUTEXES is not set
|
|
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
|
|
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
# CONFIG_DEBUG_KOBJECT is not set
|
|
CONFIG_DEBUG_BUGVERBOSE=y
|
|
# CONFIG_DEBUG_INFO is not set
|
|
-# CONFIG_DEBUG_FS is not set
|
|
+# CONFIG_DEBUG_VM is not set
|
|
+# CONFIG_DEBUG_LIST is not set
|
|
CONFIG_FRAME_POINTER=y
|
|
-CONFIG_DEBUG_USER=y
|
|
-CONFIG_DEBUG_ERRORS=y
|
|
+CONFIG_FORCED_INLINING=y
|
|
+# CONFIG_RCU_TORTURE_TEST is not set
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_DEBUG_USER is not set
|
|
+# CONFIG_DEBUG_ERRORS is not set
|
|
CONFIG_DEBUG_LL=y
|
|
# CONFIG_DEBUG_ICEDCC is not set
|
|
|
|
@@ -766,7 +1189,43 @@
|
|
#
|
|
# Cryptographic options
|
|
#
|
|
-# CONFIG_CRYPTO is not set
|
|
+CONFIG_CRYPTO=y
|
|
+CONFIG_CRYPTO_ALGAPI=y
|
|
+CONFIG_CRYPTO_BLKCIPHER=y
|
|
+CONFIG_CRYPTO_HASH=m
|
|
+CONFIG_CRYPTO_MANAGER=y
|
|
+CONFIG_CRYPTO_HMAC=m
|
|
+# CONFIG_CRYPTO_XCBC is not set
|
|
+# CONFIG_CRYPTO_NULL is not set
|
|
+# CONFIG_CRYPTO_MD4 is not set
|
|
+CONFIG_CRYPTO_MD5=y
|
|
+# CONFIG_CRYPTO_SHA1 is not set
|
|
+# CONFIG_CRYPTO_SHA256 is not set
|
|
+# CONFIG_CRYPTO_SHA512 is not set
|
|
+# CONFIG_CRYPTO_WP512 is not set
|
|
+# CONFIG_CRYPTO_TGR192 is not set
|
|
+# CONFIG_CRYPTO_GF128MUL is not set
|
|
+# CONFIG_CRYPTO_ECB is not set
|
|
+CONFIG_CRYPTO_CBC=y
|
|
+CONFIG_CRYPTO_PCBC=m
|
|
+# CONFIG_CRYPTO_LRW is not set
|
|
+CONFIG_CRYPTO_DES=y
|
|
+# CONFIG_CRYPTO_FCRYPT is not set
|
|
+# CONFIG_CRYPTO_BLOWFISH is not set
|
|
+# CONFIG_CRYPTO_TWOFISH is not set
|
|
+# CONFIG_CRYPTO_SERPENT is not set
|
|
+# CONFIG_CRYPTO_AES is not set
|
|
+# CONFIG_CRYPTO_CAST5 is not set
|
|
+# CONFIG_CRYPTO_CAST6 is not set
|
|
+# CONFIG_CRYPTO_TEA is not set
|
|
+# CONFIG_CRYPTO_ARC4 is not set
|
|
+# CONFIG_CRYPTO_KHAZAD is not set
|
|
+# CONFIG_CRYPTO_ANUBIS is not set
|
|
+# CONFIG_CRYPTO_DEFLATE is not set
|
|
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
|
|
+# CONFIG_CRYPTO_CRC32C is not set
|
|
+# CONFIG_CRYPTO_CAMELLIA is not set
|
|
+# CONFIG_CRYPTO_TEST is not set
|
|
|
|
#
|
|
# Hardware crypto devices
|
|
@@ -775,6 +1234,14 @@
|
|
#
|
|
# Library routines
|
|
#
|
|
+CONFIG_BITREVERSE=y
|
|
# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
CONFIG_CRC32=y
|
|
# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_AUDIT_GENERIC=y
|
|
+CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_ZLIB_DEFLATE=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/picotux200_defconfig linux-2.6/arch/arm/configs/picotux200_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/picotux200_defconfig 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/picotux200_defconfig 2007-12-31 10:43:35.000000000 +0200
|
|
@@ -727,14 +727,14 @@
|
|
#
|
|
# I2C Algorithms
|
|
#
|
|
-# CONFIG_I2C_ALGOBIT is not set
|
|
+CONFIG_I2C_ALGOBIT=m
|
|
# CONFIG_I2C_ALGOPCF is not set
|
|
# CONFIG_I2C_ALGOPCA is not set
|
|
|
|
#
|
|
# I2C Hardware Bus support
|
|
#
|
|
-CONFIG_I2C_AT91=m
|
|
+CONFIG_I2C_GPIO=m
|
|
# CONFIG_I2C_OCORES is not set
|
|
# CONFIG_I2C_PARPORT_LIGHT is not set
|
|
# CONFIG_I2C_STUB is not set
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/configs/sam9_l9260_defconfig linux-2.6/arch/arm/configs/sam9_l9260_defconfig
|
|
--- linux-2.6.24/arch/arm/configs/sam9_l9260_defconfig 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/configs/sam9_l9260_defconfig 2007-12-31 15:18:42.000000000 +0200
|
|
@@ -0,0 +1,1098 @@
|
|
+#
|
|
+# Automatically generated make config: don't edit
|
|
+# Linux kernel version: 2.6.23
|
|
+# Sun Oct 14 02:01:07 2007
|
|
+#
|
|
+CONFIG_ARM=y
|
|
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
|
+CONFIG_GENERIC_GPIO=y
|
|
+# CONFIG_GENERIC_TIME is not set
|
|
+# CONFIG_GENERIC_CLOCKEVENTS is not set
|
|
+CONFIG_MMU=y
|
|
+# CONFIG_NO_IOPORT is not set
|
|
+CONFIG_GENERIC_HARDIRQS=y
|
|
+CONFIG_STACKTRACE_SUPPORT=y
|
|
+CONFIG_LOCKDEP_SUPPORT=y
|
|
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
|
+CONFIG_HARDIRQS_SW_RESEND=y
|
|
+CONFIG_GENERIC_IRQ_PROBE=y
|
|
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
|
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
|
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
|
+CONFIG_GENERIC_HWEIGHT=y
|
|
+CONFIG_GENERIC_CALIBRATE_DELAY=y
|
|
+CONFIG_ZONE_DMA=y
|
|
+CONFIG_VECTORS_BASE=0xffff0000
|
|
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
|
+
|
|
+#
|
|
+# General setup
|
|
+#
|
|
+CONFIG_EXPERIMENTAL=y
|
|
+CONFIG_BROKEN_ON_SMP=y
|
|
+CONFIG_LOCK_KERNEL=y
|
|
+CONFIG_INIT_ENV_ARG_LIMIT=32
|
|
+CONFIG_LOCALVERSION=""
|
|
+# CONFIG_LOCALVERSION_AUTO is not set
|
|
+CONFIG_SWAP=y
|
|
+CONFIG_SYSVIPC=y
|
|
+CONFIG_SYSVIPC_SYSCTL=y
|
|
+CONFIG_POSIX_MQUEUE=y
|
|
+CONFIG_BSD_PROCESS_ACCT=y
|
|
+CONFIG_BSD_PROCESS_ACCT_V3=y
|
|
+# CONFIG_TASKSTATS is not set
|
|
+# CONFIG_USER_NS is not set
|
|
+CONFIG_AUDIT=y
|
|
+# CONFIG_IKCONFIG is not set
|
|
+CONFIG_LOG_BUF_SHIFT=15
|
|
+CONFIG_SYSFS_DEPRECATED=y
|
|
+# CONFIG_RELAY is not set
|
|
+CONFIG_BLK_DEV_INITRD=y
|
|
+CONFIG_INITRAMFS_SOURCE=""
|
|
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
+CONFIG_SYSCTL=y
|
|
+# CONFIG_EMBEDDED is not set
|
|
+CONFIG_UID16=y
|
|
+CONFIG_SYSCTL_SYSCALL=y
|
|
+CONFIG_KALLSYMS=y
|
|
+# CONFIG_KALLSYMS_ALL is not set
|
|
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
|
+CONFIG_HOTPLUG=y
|
|
+CONFIG_PRINTK=y
|
|
+CONFIG_BUG=y
|
|
+CONFIG_ELF_CORE=y
|
|
+CONFIG_BASE_FULL=y
|
|
+CONFIG_FUTEX=y
|
|
+CONFIG_ANON_INODES=y
|
|
+CONFIG_EPOLL=y
|
|
+CONFIG_SIGNALFD=y
|
|
+CONFIG_EVENTFD=y
|
|
+CONFIG_SHMEM=y
|
|
+CONFIG_VM_EVENT_COUNTERS=y
|
|
+CONFIG_SLAB=y
|
|
+# CONFIG_SLUB is not set
|
|
+# CONFIG_SLOB is not set
|
|
+CONFIG_RT_MUTEXES=y
|
|
+# CONFIG_TINY_SHMEM is not set
|
|
+CONFIG_BASE_SMALL=0
|
|
+# CONFIG_MODULES is not set
|
|
+CONFIG_BLOCK=y
|
|
+CONFIG_LBD=y
|
|
+# CONFIG_BLK_DEV_IO_TRACE is not set
|
|
+CONFIG_LSF=y
|
|
+# CONFIG_BLK_DEV_BSG is not set
|
|
+
|
|
+#
|
|
+# IO Schedulers
|
|
+#
|
|
+CONFIG_IOSCHED_NOOP=y
|
|
+CONFIG_IOSCHED_AS=y
|
|
+CONFIG_IOSCHED_DEADLINE=y
|
|
+CONFIG_IOSCHED_CFQ=y
|
|
+# CONFIG_DEFAULT_AS is not set
|
|
+# CONFIG_DEFAULT_DEADLINE is not set
|
|
+CONFIG_DEFAULT_CFQ=y
|
|
+# CONFIG_DEFAULT_NOOP is not set
|
|
+CONFIG_DEFAULT_IOSCHED="cfq"
|
|
+
|
|
+#
|
|
+# System Type
|
|
+#
|
|
+# CONFIG_ARCH_AAEC2000 is not set
|
|
+# CONFIG_ARCH_INTEGRATOR is not set
|
|
+# CONFIG_ARCH_REALVIEW is not set
|
|
+# CONFIG_ARCH_VERSATILE is not set
|
|
+CONFIG_ARCH_AT91=y
|
|
+# CONFIG_ARCH_CLPS7500 is not set
|
|
+# CONFIG_ARCH_CLPS711X is not set
|
|
+# CONFIG_ARCH_CO285 is not set
|
|
+# CONFIG_ARCH_EBSA110 is not set
|
|
+# CONFIG_ARCH_EP93XX is not set
|
|
+# CONFIG_ARCH_FOOTBRIDGE is not set
|
|
+# CONFIG_ARCH_NETX is not set
|
|
+# CONFIG_ARCH_H720X is not set
|
|
+# CONFIG_ARCH_IMX is not set
|
|
+# CONFIG_ARCH_IOP13XX is not set
|
|
+# CONFIG_ARCH_IOP32X is not set
|
|
+# CONFIG_ARCH_IOP33X is not set
|
|
+# CONFIG_ARCH_IXP23XX is not set
|
|
+# CONFIG_ARCH_IXP2000 is not set
|
|
+# CONFIG_ARCH_IXP4XX is not set
|
|
+# CONFIG_ARCH_L7200 is not set
|
|
+# CONFIG_ARCH_KS8695 is not set
|
|
+# CONFIG_ARCH_NS9XXX is not set
|
|
+# CONFIG_ARCH_MXC is not set
|
|
+# CONFIG_ARCH_PNX4008 is not set
|
|
+# CONFIG_ARCH_PXA is not set
|
|
+# CONFIG_ARCH_RPC is not set
|
|
+# CONFIG_ARCH_SA1100 is not set
|
|
+# CONFIG_ARCH_S3C2410 is not set
|
|
+# CONFIG_ARCH_SHARK is not set
|
|
+# CONFIG_ARCH_LH7A40X is not set
|
|
+# CONFIG_ARCH_DAVINCI is not set
|
|
+# CONFIG_ARCH_OMAP is not set
|
|
+
|
|
+#
|
|
+# Boot options
|
|
+#
|
|
+
|
|
+#
|
|
+# Power management
|
|
+#
|
|
+
|
|
+#
|
|
+# Atmel AT91 System-on-Chip
|
|
+#
|
|
+# CONFIG_ARCH_AT91RM9200 is not set
|
|
+CONFIG_ARCH_AT91SAM9260=y
|
|
+# CONFIG_ARCH_AT91SAM9261 is not set
|
|
+# CONFIG_ARCH_AT91SAM9263 is not set
|
|
+# CONFIG_ARCH_AT91SAM9RL is not set
|
|
+
|
|
+#
|
|
+# AT91SAM9260 Variants
|
|
+#
|
|
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
|
|
+
|
|
+#
|
|
+# AT91SAM9260 / AT91SAM9XE Board Type
|
|
+#
|
|
+# CONFIG_MACH_AT91SAM9260EK is not set
|
|
+# CONFIG_MACH_CAM60 is not set
|
|
+CONFIG_MACH_SAM9_L9260=y
|
|
+
|
|
+#
|
|
+# AT91 Board Options
|
|
+#
|
|
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
|
|
+
|
|
+#
|
|
+# AT91 Feature Selections
|
|
+#
|
|
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
|
|
+# CONFIG_ATMEL_TCLIB is not set
|
|
+
|
|
+#
|
|
+# Processor Type
|
|
+#
|
|
+CONFIG_CPU_32=y
|
|
+CONFIG_CPU_ARM926T=y
|
|
+CONFIG_CPU_32v5=y
|
|
+CONFIG_CPU_ABRT_EV5TJ=y
|
|
+CONFIG_CPU_CACHE_VIVT=y
|
|
+CONFIG_CPU_COPY_V4WB=y
|
|
+CONFIG_CPU_TLB_V4WBI=y
|
|
+CONFIG_CPU_CP15=y
|
|
+CONFIG_CPU_CP15_MMU=y
|
|
+
|
|
+#
|
|
+# Processor Features
|
|
+#
|
|
+CONFIG_ARM_THUMB=y
|
|
+# CONFIG_CPU_ICACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_DISABLE is not set
|
|
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
|
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
|
|
+# CONFIG_OUTER_CACHE is not set
|
|
+
|
|
+#
|
|
+# Bus support
|
|
+#
|
|
+# CONFIG_PCI_SYSCALL is not set
|
|
+# CONFIG_ARCH_SUPPORTS_MSI is not set
|
|
+
|
|
+#
|
|
+# PCCARD (PCMCIA/CardBus) support
|
|
+#
|
|
+# CONFIG_PCCARD is not set
|
|
+
|
|
+#
|
|
+# Kernel Features
|
|
+#
|
|
+# CONFIG_TICK_ONESHOT is not set
|
|
+CONFIG_PREEMPT=y
|
|
+# CONFIG_NO_IDLE_HZ is not set
|
|
+CONFIG_HZ=100
|
|
+# CONFIG_AEABI is not set
|
|
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
|
+CONFIG_SELECT_MEMORY_MODEL=y
|
|
+CONFIG_FLATMEM_MANUAL=y
|
|
+# CONFIG_DISCONTIGMEM_MANUAL is not set
|
|
+# CONFIG_SPARSEMEM_MANUAL is not set
|
|
+CONFIG_FLATMEM=y
|
|
+CONFIG_FLAT_NODE_MEM_MAP=y
|
|
+# CONFIG_SPARSEMEM_STATIC is not set
|
|
+CONFIG_SPLIT_PTLOCK_CPUS=4096
|
|
+# CONFIG_RESOURCES_64BIT is not set
|
|
+CONFIG_ZONE_DMA_FLAG=1
|
|
+CONFIG_BOUNCE=y
|
|
+CONFIG_VIRT_TO_BUS=y
|
|
+CONFIG_LEDS=y
|
|
+CONFIG_LEDS_TIMER=y
|
|
+CONFIG_LEDS_CPU=y
|
|
+CONFIG_ALIGNMENT_TRAP=y
|
|
+
|
|
+#
|
|
+# Boot options
|
|
+#
|
|
+CONFIG_ZBOOT_ROM_TEXT=0x0
|
|
+CONFIG_ZBOOT_ROM_BSS=0x0
|
|
+CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
|
|
+# CONFIG_XIP_KERNEL is not set
|
|
+# CONFIG_KEXEC is not set
|
|
+
|
|
+#
|
|
+# Floating point emulation
|
|
+#
|
|
+
|
|
+#
|
|
+# At least one emulation must be selected
|
|
+#
|
|
+CONFIG_FPE_NWFPE=y
|
|
+# CONFIG_FPE_NWFPE_XP is not set
|
|
+# CONFIG_FPE_FASTFPE is not set
|
|
+# CONFIG_VFP is not set
|
|
+
|
|
+#
|
|
+# Userspace binary formats
|
|
+#
|
|
+CONFIG_BINFMT_ELF=y
|
|
+# CONFIG_BINFMT_AOUT is not set
|
|
+# CONFIG_BINFMT_MISC is not set
|
|
+# CONFIG_ARTHUR is not set
|
|
+
|
|
+#
|
|
+# Power management options
|
|
+#
|
|
+# CONFIG_PM is not set
|
|
+CONFIG_SUSPEND_UP_POSSIBLE=y
|
|
+
|
|
+#
|
|
+# Networking
|
|
+#
|
|
+CONFIG_NET=y
|
|
+
|
|
+#
|
|
+# Networking options
|
|
+#
|
|
+CONFIG_PACKET=y
|
|
+CONFIG_PACKET_MMAP=y
|
|
+CONFIG_UNIX=y
|
|
+CONFIG_XFRM=y
|
|
+CONFIG_XFRM_USER=y
|
|
+# CONFIG_XFRM_SUB_POLICY is not set
|
|
+# CONFIG_XFRM_MIGRATE is not set
|
|
+CONFIG_NET_KEY=y
|
|
+# CONFIG_NET_KEY_MIGRATE is not set
|
|
+CONFIG_INET=y
|
|
+# CONFIG_IP_MULTICAST is not set
|
|
+# CONFIG_IP_ADVANCED_ROUTER is not set
|
|
+CONFIG_IP_FIB_HASH=y
|
|
+# CONFIG_IP_PNP is not set
|
|
+# CONFIG_NET_IPIP is not set
|
|
+# CONFIG_NET_IPGRE is not set
|
|
+# CONFIG_ARPD is not set
|
|
+# CONFIG_SYN_COOKIES is not set
|
|
+# CONFIG_INET_AH is not set
|
|
+# CONFIG_INET_ESP is not set
|
|
+# CONFIG_INET_IPCOMP is not set
|
|
+# CONFIG_INET_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
|
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
|
+# CONFIG_INET_XFRM_MODE_BEET is not set
|
|
+CONFIG_INET_DIAG=y
|
|
+CONFIG_INET_TCP_DIAG=y
|
|
+# CONFIG_TCP_CONG_ADVANCED is not set
|
|
+CONFIG_TCP_CONG_CUBIC=y
|
|
+CONFIG_DEFAULT_TCP_CONG="cubic"
|
|
+# CONFIG_TCP_MD5SIG is not set
|
|
+# CONFIG_IPV6 is not set
|
|
+# CONFIG_INET6_XFRM_TUNNEL is not set
|
|
+# CONFIG_INET6_TUNNEL is not set
|
|
+# CONFIG_NETWORK_SECMARK is not set
|
|
+# CONFIG_NETFILTER is not set
|
|
+# CONFIG_IP_DCCP is not set
|
|
+# CONFIG_IP_SCTP is not set
|
|
+# CONFIG_TIPC is not set
|
|
+# CONFIG_ATM is not set
|
|
+# CONFIG_BRIDGE is not set
|
|
+# CONFIG_VLAN_8021Q is not set
|
|
+# CONFIG_DECNET is not set
|
|
+# CONFIG_LLC2 is not set
|
|
+# CONFIG_IPX is not set
|
|
+# CONFIG_ATALK is not set
|
|
+# CONFIG_X25 is not set
|
|
+# CONFIG_LAPB is not set
|
|
+# CONFIG_ECONET is not set
|
|
+# CONFIG_WAN_ROUTER is not set
|
|
+
|
|
+#
|
|
+# QoS and/or fair queueing
|
|
+#
|
|
+# CONFIG_NET_SCHED is not set
|
|
+
|
|
+#
|
|
+# Network testing
|
|
+#
|
|
+# CONFIG_NET_PKTGEN is not set
|
|
+# CONFIG_HAMRADIO is not set
|
|
+# CONFIG_IRDA is not set
|
|
+# CONFIG_BT is not set
|
|
+# CONFIG_AF_RXRPC is not set
|
|
+
|
|
+#
|
|
+# Wireless
|
|
+#
|
|
+# CONFIG_CFG80211 is not set
|
|
+# CONFIG_WIRELESS_EXT is not set
|
|
+# CONFIG_MAC80211 is not set
|
|
+# CONFIG_IEEE80211 is not set
|
|
+# CONFIG_RFKILL is not set
|
|
+# CONFIG_NET_9P is not set
|
|
+
|
|
+#
|
|
+# Device Drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Generic Driver Options
|
|
+#
|
|
+CONFIG_STANDALONE=y
|
|
+CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|
+CONFIG_FW_LOADER=y
|
|
+# CONFIG_DEBUG_DRIVER is not set
|
|
+# CONFIG_DEBUG_DEVRES is not set
|
|
+# CONFIG_SYS_HYPERVISOR is not set
|
|
+# CONFIG_CONNECTOR is not set
|
|
+CONFIG_MTD=y
|
|
+# CONFIG_MTD_DEBUG is not set
|
|
+# CONFIG_MTD_CONCAT is not set
|
|
+CONFIG_MTD_PARTITIONS=y
|
|
+# CONFIG_MTD_REDBOOT_PARTS is not set
|
|
+# CONFIG_MTD_CMDLINE_PARTS is not set
|
|
+# CONFIG_MTD_AFS_PARTS is not set
|
|
+
|
|
+#
|
|
+# User Modules And Translation Layers
|
|
+#
|
|
+CONFIG_MTD_CHAR=y
|
|
+CONFIG_MTD_BLKDEVS=y
|
|
+CONFIG_MTD_BLOCK=y
|
|
+# CONFIG_FTL is not set
|
|
+# CONFIG_NFTL is not set
|
|
+# CONFIG_INFTL is not set
|
|
+# CONFIG_RFD_FTL is not set
|
|
+# CONFIG_SSFDC is not set
|
|
+
|
|
+#
|
|
+# RAM/ROM/Flash chip drivers
|
|
+#
|
|
+# CONFIG_MTD_CFI is not set
|
|
+# CONFIG_MTD_JEDECPROBE is not set
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
|
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
|
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
|
+CONFIG_MTD_CFI_I1=y
|
|
+CONFIG_MTD_CFI_I2=y
|
|
+# CONFIG_MTD_CFI_I4 is not set
|
|
+# CONFIG_MTD_CFI_I8 is not set
|
|
+# CONFIG_MTD_RAM is not set
|
|
+# CONFIG_MTD_ROM is not set
|
|
+# CONFIG_MTD_ABSENT is not set
|
|
+
|
|
+#
|
|
+# Mapping drivers for chip access
|
|
+#
|
|
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
|
+# CONFIG_MTD_PLATRAM is not set
|
|
+
|
|
+#
|
|
+# Self-contained MTD device drivers
|
|
+#
|
|
+# CONFIG_MTD_SLRAM is not set
|
|
+# CONFIG_MTD_PHRAM is not set
|
|
+# CONFIG_MTD_MTDRAM is not set
|
|
+CONFIG_MTD_BLOCK2MTD=y
|
|
+
|
|
+#
|
|
+# Disk-On-Chip Device Drivers
|
|
+#
|
|
+# CONFIG_MTD_DOC2000 is not set
|
|
+# CONFIG_MTD_DOC2001 is not set
|
|
+# CONFIG_MTD_DOC2001PLUS is not set
|
|
+CONFIG_MTD_NAND=y
|
|
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
|
|
+# CONFIG_MTD_NAND_ECC_SMC is not set
|
|
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
|
|
+CONFIG_MTD_NAND_IDS=y
|
|
+# CONFIG_MTD_NAND_DISKONCHIP is not set
|
|
+CONFIG_MTD_NAND_AT91=y
|
|
+# CONFIG_MTD_NAND_NANDSIM is not set
|
|
+CONFIG_MTD_NAND_PLATFORM=y
|
|
+# CONFIG_MTD_ONENAND is not set
|
|
+
|
|
+#
|
|
+# UBI - Unsorted block images
|
|
+#
|
|
+CONFIG_MTD_UBI=y
|
|
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
|
+CONFIG_MTD_UBI_BEB_RESERVE=3
|
|
+CONFIG_MTD_UBI_GLUEBI=y
|
|
+
|
|
+#
|
|
+# UBI debugging options
|
|
+#
|
|
+# CONFIG_MTD_UBI_DEBUG is not set
|
|
+# CONFIG_PARPORT is not set
|
|
+CONFIG_BLK_DEV=y
|
|
+# CONFIG_BLK_DEV_COW_COMMON is not set
|
|
+CONFIG_BLK_DEV_LOOP=y
|
|
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
|
+# CONFIG_BLK_DEV_NBD is not set
|
|
+# CONFIG_BLK_DEV_UB is not set
|
|
+CONFIG_BLK_DEV_RAM=y
|
|
+CONFIG_BLK_DEV_RAM_COUNT=16
|
|
+CONFIG_BLK_DEV_RAM_SIZE=8192
|
|
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
|
|
+# CONFIG_CDROM_PKTCDVD is not set
|
|
+# CONFIG_ATA_OVER_ETH is not set
|
|
+
|
|
+#
|
|
+# SCSI device support
|
|
+#
|
|
+CONFIG_RAID_ATTRS=y
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_SCSI_DMA=y
|
|
+# CONFIG_SCSI_TGT is not set
|
|
+# CONFIG_SCSI_NETLINK is not set
|
|
+CONFIG_SCSI_PROC_FS=y
|
|
+
|
|
+#
|
|
+# SCSI support type (disk, tape, CD-ROM)
|
|
+#
|
|
+CONFIG_BLK_DEV_SD=y
|
|
+# CONFIG_CHR_DEV_ST is not set
|
|
+# CONFIG_CHR_DEV_OSST is not set
|
|
+# CONFIG_BLK_DEV_SR is not set
|
|
+CONFIG_CHR_DEV_SG=y
|
|
+# CONFIG_CHR_DEV_SCH is not set
|
|
+
|
|
+#
|
|
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
|
+#
|
|
+CONFIG_SCSI_MULTI_LUN=y
|
|
+CONFIG_SCSI_CONSTANTS=y
|
|
+CONFIG_SCSI_LOGGING=y
|
|
+# CONFIG_SCSI_SCAN_ASYNC is not set
|
|
+
|
|
+#
|
|
+# SCSI Transports
|
|
+#
|
|
+# CONFIG_SCSI_SPI_ATTRS is not set
|
|
+# CONFIG_SCSI_FC_ATTRS is not set
|
|
+# CONFIG_SCSI_ISCSI_ATTRS is not set
|
|
+# CONFIG_SCSI_SAS_LIBSAS is not set
|
|
+# CONFIG_SCSI_LOWLEVEL is not set
|
|
+# CONFIG_ATA is not set
|
|
+# CONFIG_MD is not set
|
|
+CONFIG_NETDEVICES=y
|
|
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
|
|
+# CONFIG_DUMMY is not set
|
|
+# CONFIG_BONDING is not set
|
|
+# CONFIG_MACVLAN is not set
|
|
+# CONFIG_EQUALIZER is not set
|
|
+# CONFIG_TUN is not set
|
|
+CONFIG_PHYLIB=y
|
|
+
|
|
+#
|
|
+# MII PHY device drivers
|
|
+#
|
|
+# CONFIG_MARVELL_PHY is not set
|
|
+# CONFIG_DAVICOM_PHY is not set
|
|
+# CONFIG_QSEMI_PHY is not set
|
|
+# CONFIG_LXT_PHY is not set
|
|
+# CONFIG_CICADA_PHY is not set
|
|
+# CONFIG_VITESSE_PHY is not set
|
|
+# CONFIG_SMSC_PHY is not set
|
|
+# CONFIG_BROADCOM_PHY is not set
|
|
+# CONFIG_ICPLUS_PHY is not set
|
|
+# CONFIG_FIXED_PHY is not set
|
|
+CONFIG_NET_ETHERNET=y
|
|
+CONFIG_MII=y
|
|
+CONFIG_MACB=y
|
|
+# CONFIG_AX88796 is not set
|
|
+# CONFIG_SMC91X is not set
|
|
+# CONFIG_DM9000 is not set
|
|
+# CONFIG_NETDEV_1000 is not set
|
|
+# CONFIG_NETDEV_10000 is not set
|
|
+
|
|
+#
|
|
+# Wireless LAN
|
|
+#
|
|
+# CONFIG_WLAN_PRE80211 is not set
|
|
+# CONFIG_WLAN_80211 is not set
|
|
+
|
|
+#
|
|
+# USB Network Adapters
|
|
+#
|
|
+# CONFIG_USB_CATC is not set
|
|
+# CONFIG_USB_KAWETH is not set
|
|
+# CONFIG_USB_PEGASUS is not set
|
|
+# CONFIG_USB_RTL8150 is not set
|
|
+# CONFIG_USB_USBNET_MII is not set
|
|
+# CONFIG_USB_USBNET is not set
|
|
+# CONFIG_WAN is not set
|
|
+# CONFIG_PPP is not set
|
|
+# CONFIG_SLIP is not set
|
|
+# CONFIG_SHAPER is not set
|
|
+# CONFIG_NETCONSOLE is not set
|
|
+# CONFIG_NETPOLL is not set
|
|
+# CONFIG_NET_POLL_CONTROLLER is not set
|
|
+# CONFIG_ISDN is not set
|
|
+
|
|
+#
|
|
+# Input device support
|
|
+#
|
|
+CONFIG_INPUT=y
|
|
+# CONFIG_INPUT_FF_MEMLESS is not set
|
|
+# CONFIG_INPUT_POLLDEV is not set
|
|
+
|
|
+#
|
|
+# Userland interfaces
|
|
+#
|
|
+CONFIG_INPUT_MOUSEDEV=y
|
|
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
|
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
|
+# CONFIG_INPUT_JOYDEV is not set
|
|
+# CONFIG_INPUT_TSDEV is not set
|
|
+# CONFIG_INPUT_EVDEV is not set
|
|
+# CONFIG_INPUT_EVBUG is not set
|
|
+
|
|
+#
|
|
+# Input Device Drivers
|
|
+#
|
|
+# CONFIG_INPUT_KEYBOARD is not set
|
|
+# CONFIG_INPUT_MOUSE is not set
|
|
+# CONFIG_INPUT_JOYSTICK is not set
|
|
+# CONFIG_INPUT_TABLET is not set
|
|
+# CONFIG_INPUT_TOUCHSCREEN is not set
|
|
+# CONFIG_INPUT_MISC is not set
|
|
+
|
|
+#
|
|
+# Hardware I/O ports
|
|
+#
|
|
+# CONFIG_SERIO is not set
|
|
+# CONFIG_GAMEPORT is not set
|
|
+
|
|
+#
|
|
+# Character devices
|
|
+#
|
|
+CONFIG_VT=y
|
|
+CONFIG_VT_CONSOLE=y
|
|
+CONFIG_HW_CONSOLE=y
|
|
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
|
+# CONFIG_SERIAL_NONSTANDARD is not set
|
|
+
|
|
+#
|
|
+# Serial drivers
|
|
+#
|
|
+# CONFIG_SERIAL_8250 is not set
|
|
+
|
|
+#
|
|
+# Non-8250 serial port support
|
|
+#
|
|
+CONFIG_SERIAL_ATMEL=y
|
|
+CONFIG_SERIAL_ATMEL_CONSOLE=y
|
|
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
|
|
+CONFIG_SERIAL_CORE=y
|
|
+CONFIG_SERIAL_CORE_CONSOLE=y
|
|
+CONFIG_UNIX98_PTYS=y
|
|
+CONFIG_LEGACY_PTYS=y
|
|
+CONFIG_LEGACY_PTY_COUNT=16
|
|
+# CONFIG_IPMI_HANDLER is not set
|
|
+# CONFIG_WATCHDOG is not set
|
|
+# CONFIG_HW_RANDOM is not set
|
|
+# CONFIG_NVRAM is not set
|
|
+# CONFIG_R3964 is not set
|
|
+# CONFIG_RAW_DRIVER is not set
|
|
+# CONFIG_TCG_TPM is not set
|
|
+# CONFIG_I2C is not set
|
|
+
|
|
+#
|
|
+# SPI support
|
|
+#
|
|
+# CONFIG_SPI is not set
|
|
+# CONFIG_SPI_MASTER is not set
|
|
+# CONFIG_W1 is not set
|
|
+# CONFIG_HWMON is not set
|
|
+# CONFIG_MISC_DEVICES is not set
|
|
+
|
|
+#
|
|
+# Multifunction device drivers
|
|
+#
|
|
+# CONFIG_MFD_SM501 is not set
|
|
+CONFIG_NEW_LEDS=y
|
|
+CONFIG_LEDS_CLASS=y
|
|
+
|
|
+#
|
|
+# LED drivers
|
|
+#
|
|
+CONFIG_LEDS_GPIO=y
|
|
+
|
|
+#
|
|
+# LED Triggers
|
|
+#
|
|
+CONFIG_LEDS_TRIGGERS=y
|
|
+CONFIG_LEDS_TRIGGER_TIMER=y
|
|
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
|
+
|
|
+#
|
|
+# Multimedia devices
|
|
+#
|
|
+# CONFIG_VIDEO_DEV is not set
|
|
+# CONFIG_DVB_CORE is not set
|
|
+# CONFIG_DAB is not set
|
|
+
|
|
+#
|
|
+# Graphics support
|
|
+#
|
|
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
|
+
|
|
+#
|
|
+# Display device support
|
|
+#
|
|
+# CONFIG_DISPLAY_SUPPORT is not set
|
|
+# CONFIG_VGASTATE is not set
|
|
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
|
+# CONFIG_FB is not set
|
|
+
|
|
+#
|
|
+# Console display driver support
|
|
+#
|
|
+# CONFIG_VGA_CONSOLE is not set
|
|
+CONFIG_DUMMY_CONSOLE=y
|
|
+
|
|
+#
|
|
+# Sound
|
|
+#
|
|
+# CONFIG_SOUND is not set
|
|
+# CONFIG_HID_SUPPORT is not set
|
|
+CONFIG_USB_SUPPORT=y
|
|
+CONFIG_USB_ARCH_HAS_HCD=y
|
|
+CONFIG_USB_ARCH_HAS_OHCI=y
|
|
+# CONFIG_USB_ARCH_HAS_EHCI is not set
|
|
+CONFIG_USB=y
|
|
+# CONFIG_USB_DEBUG is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous USB options
|
|
+#
|
|
+CONFIG_USB_DEVICEFS=y
|
|
+CONFIG_USB_DEVICE_CLASS=y
|
|
+# CONFIG_USB_DYNAMIC_MINORS is not set
|
|
+# CONFIG_USB_OTG is not set
|
|
+
|
|
+#
|
|
+# USB Host Controller Drivers
|
|
+#
|
|
+# CONFIG_USB_ISP116X_HCD is not set
|
|
+CONFIG_USB_OHCI_HCD=y
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
|
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
|
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
|
+# CONFIG_USB_SL811_HCD is not set
|
|
+# CONFIG_USB_R8A66597_HCD is not set
|
|
+
|
|
+#
|
|
+# USB Device Class drivers
|
|
+#
|
|
+# CONFIG_USB_ACM is not set
|
|
+# CONFIG_USB_PRINTER is not set
|
|
+
|
|
+#
|
|
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
|
+#
|
|
+
|
|
+#
|
|
+# may also be needed; see USB_STORAGE Help for more information
|
|
+#
|
|
+CONFIG_USB_STORAGE=y
|
|
+# CONFIG_USB_STORAGE_DEBUG is not set
|
|
+# CONFIG_USB_STORAGE_DATAFAB is not set
|
|
+# CONFIG_USB_STORAGE_FREECOM is not set
|
|
+# CONFIG_USB_STORAGE_DPCM is not set
|
|
+# CONFIG_USB_STORAGE_USBAT is not set
|
|
+# CONFIG_USB_STORAGE_SDDR09 is not set
|
|
+# CONFIG_USB_STORAGE_SDDR55 is not set
|
|
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
|
+# CONFIG_USB_STORAGE_ALAUDA is not set
|
|
+# CONFIG_USB_STORAGE_KARMA is not set
|
|
+CONFIG_USB_LIBUSUAL=y
|
|
+
|
|
+#
|
|
+# USB Imaging devices
|
|
+#
|
|
+# CONFIG_USB_MDC800 is not set
|
|
+# CONFIG_USB_MICROTEK is not set
|
|
+# CONFIG_USB_MON is not set
|
|
+
|
|
+#
|
|
+# USB port drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Serial Converter support
|
|
+#
|
|
+# CONFIG_USB_SERIAL is not set
|
|
+
|
|
+#
|
|
+# USB Miscellaneous drivers
|
|
+#
|
|
+# CONFIG_USB_EMI62 is not set
|
|
+# CONFIG_USB_EMI26 is not set
|
|
+# CONFIG_USB_ADUTUX is not set
|
|
+# CONFIG_USB_AUERSWALD is not set
|
|
+# CONFIG_USB_RIO500 is not set
|
|
+# CONFIG_USB_LEGOTOWER is not set
|
|
+# CONFIG_USB_LCD is not set
|
|
+# CONFIG_USB_BERRY_CHARGE is not set
|
|
+# CONFIG_USB_LED is not set
|
|
+# CONFIG_USB_CYPRESS_CY7C63 is not set
|
|
+# CONFIG_USB_CYTHERM is not set
|
|
+# CONFIG_USB_PHIDGET is not set
|
|
+# CONFIG_USB_IDMOUSE is not set
|
|
+# CONFIG_USB_FTDI_ELAN is not set
|
|
+# CONFIG_USB_APPLEDISPLAY is not set
|
|
+# CONFIG_USB_LD is not set
|
|
+# CONFIG_USB_TRANCEVIBRATOR is not set
|
|
+# CONFIG_USB_IOWARRIOR is not set
|
|
+# CONFIG_USB_TEST is not set
|
|
+
|
|
+#
|
|
+# USB DSL modem support
|
|
+#
|
|
+
|
|
+#
|
|
+# USB Gadget Support
|
|
+#
|
|
+CONFIG_USB_GADGET=y
|
|
+# CONFIG_USB_GADGET_DEBUG is not set
|
|
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
|
+CONFIG_USB_GADGET_SELECTED=y
|
|
+# CONFIG_USB_GADGET_AMD5536UDC is not set
|
|
+# CONFIG_USB_GADGET_FSL_USB2 is not set
|
|
+# CONFIG_USB_GADGET_NET2280 is not set
|
|
+# CONFIG_USB_GADGET_PXA2XX is not set
|
|
+# CONFIG_USB_GADGET_M66592 is not set
|
|
+# CONFIG_USB_GADGET_GOKU is not set
|
|
+# CONFIG_USB_GADGET_LH7A40X is not set
|
|
+# CONFIG_USB_GADGET_OMAP is not set
|
|
+# CONFIG_USB_GADGET_S3C2410 is not set
|
|
+CONFIG_USB_GADGET_AT91=y
|
|
+CONFIG_USB_AT91=y
|
|
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
|
+# CONFIG_USB_GADGET_DUALSPEED is not set
|
|
+# CONFIG_USB_ZERO is not set
|
|
+CONFIG_USB_ETH=y
|
|
+CONFIG_USB_ETH_RNDIS=y
|
|
+# CONFIG_USB_GADGETFS is not set
|
|
+# CONFIG_USB_FILE_STORAGE is not set
|
|
+# CONFIG_USB_G_SERIAL is not set
|
|
+# CONFIG_USB_MIDI_GADGET is not set
|
|
+CONFIG_MMC=y
|
|
+CONFIG_MMC_DEBUG=y
|
|
+# CONFIG_MMC_UNSAFE_RESUME is not set
|
|
+
|
|
+#
|
|
+# MMC/SD Card Drivers
|
|
+#
|
|
+CONFIG_MMC_BLOCK=y
|
|
+CONFIG_MMC_BLOCK_BOUNCE=y
|
|
+
|
|
+#
|
|
+# MMC/SD Host Controller Drivers
|
|
+#
|
|
+CONFIG_MMC_AT91=y
|
|
+CONFIG_RTC_LIB=y
|
|
+CONFIG_RTC_CLASS=y
|
|
+CONFIG_RTC_HCTOSYS=y
|
|
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
|
+# CONFIG_RTC_DEBUG is not set
|
|
+
|
|
+#
|
|
+# RTC interfaces
|
|
+#
|
|
+CONFIG_RTC_INTF_SYSFS=y
|
|
+CONFIG_RTC_INTF_PROC=y
|
|
+CONFIG_RTC_INTF_DEV=y
|
|
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
|
+# CONFIG_RTC_DRV_TEST is not set
|
|
+
|
|
+#
|
|
+# SPI RTC drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# Platform RTC drivers
|
|
+#
|
|
+# CONFIG_RTC_DRV_CMOS is not set
|
|
+CONFIG_RTC_DRV_DS1553=y
|
|
+# CONFIG_RTC_DRV_STK17TA8 is not set
|
|
+CONFIG_RTC_DRV_DS1742=y
|
|
+CONFIG_RTC_DRV_M48T86=y
|
|
+# CONFIG_RTC_DRV_M48T59 is not set
|
|
+CONFIG_RTC_DRV_V3020=y
|
|
+
|
|
+#
|
|
+# on-CPU RTC drivers
|
|
+#
|
|
+
|
|
+#
|
|
+# DMA Engine support
|
|
+#
|
|
+# CONFIG_DMA_ENGINE is not set
|
|
+
|
|
+#
|
|
+# DMA Clients
|
|
+#
|
|
+
|
|
+#
|
|
+# DMA Devices
|
|
+#
|
|
+
|
|
+#
|
|
+# File systems
|
|
+#
|
|
+CONFIG_EXT2_FS=y
|
|
+CONFIG_EXT2_FS_XATTR=y
|
|
+CONFIG_EXT2_FS_POSIX_ACL=y
|
|
+CONFIG_EXT2_FS_SECURITY=y
|
|
+# CONFIG_EXT2_FS_XIP is not set
|
|
+CONFIG_EXT3_FS=y
|
|
+CONFIG_EXT3_FS_XATTR=y
|
|
+CONFIG_EXT3_FS_POSIX_ACL=y
|
|
+CONFIG_EXT3_FS_SECURITY=y
|
|
+# CONFIG_EXT4DEV_FS is not set
|
|
+CONFIG_JBD=y
|
|
+# CONFIG_JBD_DEBUG is not set
|
|
+CONFIG_FS_MBCACHE=y
|
|
+# CONFIG_REISERFS_FS is not set
|
|
+# CONFIG_JFS_FS is not set
|
|
+CONFIG_FS_POSIX_ACL=y
|
|
+# CONFIG_XFS_FS is not set
|
|
+# CONFIG_GFS2_FS is not set
|
|
+# CONFIG_OCFS2_FS is not set
|
|
+# CONFIG_MINIX_FS is not set
|
|
+# CONFIG_ROMFS_FS is not set
|
|
+CONFIG_INOTIFY=y
|
|
+CONFIG_INOTIFY_USER=y
|
|
+# CONFIG_QUOTA is not set
|
|
+CONFIG_DNOTIFY=y
|
|
+# CONFIG_AUTOFS_FS is not set
|
|
+# CONFIG_AUTOFS4_FS is not set
|
|
+# CONFIG_FUSE_FS is not set
|
|
+
|
|
+#
|
|
+# CD-ROM/DVD Filesystems
|
|
+#
|
|
+# CONFIG_ISO9660_FS is not set
|
|
+# CONFIG_UDF_FS is not set
|
|
+
|
|
+#
|
|
+# DOS/FAT/NT Filesystems
|
|
+#
|
|
+CONFIG_FAT_FS=y
|
|
+CONFIG_MSDOS_FS=y
|
|
+CONFIG_VFAT_FS=y
|
|
+CONFIG_FAT_DEFAULT_CODEPAGE=437
|
|
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|
+# CONFIG_NTFS_FS is not set
|
|
+
|
|
+#
|
|
+# Pseudo filesystems
|
|
+#
|
|
+CONFIG_PROC_FS=y
|
|
+CONFIG_PROC_SYSCTL=y
|
|
+CONFIG_SYSFS=y
|
|
+CONFIG_TMPFS=y
|
|
+# CONFIG_TMPFS_POSIX_ACL is not set
|
|
+# CONFIG_HUGETLB_PAGE is not set
|
|
+CONFIG_RAMFS=y
|
|
+# CONFIG_CONFIGFS_FS is not set
|
|
+
|
|
+#
|
|
+# Miscellaneous filesystems
|
|
+#
|
|
+# CONFIG_ADFS_FS is not set
|
|
+# CONFIG_AFFS_FS is not set
|
|
+# CONFIG_HFS_FS is not set
|
|
+# CONFIG_HFSPLUS_FS is not set
|
|
+# CONFIG_BEFS_FS is not set
|
|
+# CONFIG_BFS_FS is not set
|
|
+# CONFIG_EFS_FS is not set
|
|
+CONFIG_JFFS2_FS=y
|
|
+CONFIG_JFFS2_FS_DEBUG=0
|
|
+CONFIG_JFFS2_FS_WRITEBUFFER=y
|
|
+# CONFIG_JFFS2_SUMMARY is not set
|
|
+# CONFIG_JFFS2_FS_XATTR is not set
|
|
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
|
+CONFIG_JFFS2_ZLIB=y
|
|
+CONFIG_JFFS2_RTIME=y
|
|
+# CONFIG_JFFS2_RUBIN is not set
|
|
+# CONFIG_CRAMFS is not set
|
|
+# CONFIG_VXFS_FS is not set
|
|
+# CONFIG_HPFS_FS is not set
|
|
+# CONFIG_QNX4FS_FS is not set
|
|
+# CONFIG_SYSV_FS is not set
|
|
+# CONFIG_UFS_FS is not set
|
|
+
|
|
+#
|
|
+# Network File Systems
|
|
+#
|
|
+CONFIG_NFS_FS=y
|
|
+CONFIG_NFS_V3=y
|
|
+# CONFIG_NFS_V3_ACL is not set
|
|
+# CONFIG_NFS_V4 is not set
|
|
+CONFIG_NFS_DIRECTIO=y
|
|
+# CONFIG_NFSD is not set
|
|
+CONFIG_LOCKD=y
|
|
+CONFIG_LOCKD_V4=y
|
|
+CONFIG_NFS_COMMON=y
|
|
+CONFIG_SUNRPC=y
|
|
+# CONFIG_SUNRPC_BIND34 is not set
|
|
+# CONFIG_RPCSEC_GSS_KRB5 is not set
|
|
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
|
+# CONFIG_SMB_FS is not set
|
|
+# CONFIG_CIFS is not set
|
|
+# CONFIG_NCP_FS is not set
|
|
+# CONFIG_CODA_FS is not set
|
|
+# CONFIG_AFS_FS is not set
|
|
+
|
|
+#
|
|
+# Partition Types
|
|
+#
|
|
+# CONFIG_PARTITION_ADVANCED is not set
|
|
+CONFIG_MSDOS_PARTITION=y
|
|
+
|
|
+#
|
|
+# Native Language Support
|
|
+#
|
|
+CONFIG_NLS=y
|
|
+CONFIG_NLS_DEFAULT="iso8859-1"
|
|
+CONFIG_NLS_CODEPAGE_437=y
|
|
+CONFIG_NLS_CODEPAGE_737=y
|
|
+CONFIG_NLS_CODEPAGE_775=y
|
|
+CONFIG_NLS_CODEPAGE_850=y
|
|
+CONFIG_NLS_CODEPAGE_852=y
|
|
+CONFIG_NLS_CODEPAGE_855=y
|
|
+CONFIG_NLS_CODEPAGE_857=y
|
|
+CONFIG_NLS_CODEPAGE_860=y
|
|
+CONFIG_NLS_CODEPAGE_861=y
|
|
+CONFIG_NLS_CODEPAGE_862=y
|
|
+CONFIG_NLS_CODEPAGE_863=y
|
|
+CONFIG_NLS_CODEPAGE_864=y
|
|
+CONFIG_NLS_CODEPAGE_865=y
|
|
+CONFIG_NLS_CODEPAGE_866=y
|
|
+CONFIG_NLS_CODEPAGE_869=y
|
|
+CONFIG_NLS_CODEPAGE_936=y
|
|
+CONFIG_NLS_CODEPAGE_950=y
|
|
+CONFIG_NLS_CODEPAGE_932=y
|
|
+CONFIG_NLS_CODEPAGE_949=y
|
|
+CONFIG_NLS_CODEPAGE_874=y
|
|
+CONFIG_NLS_ISO8859_8=y
|
|
+CONFIG_NLS_CODEPAGE_1250=y
|
|
+CONFIG_NLS_CODEPAGE_1251=y
|
|
+CONFIG_NLS_ASCII=y
|
|
+CONFIG_NLS_ISO8859_1=y
|
|
+CONFIG_NLS_ISO8859_2=y
|
|
+CONFIG_NLS_ISO8859_3=y
|
|
+CONFIG_NLS_ISO8859_4=y
|
|
+CONFIG_NLS_ISO8859_5=y
|
|
+CONFIG_NLS_ISO8859_6=y
|
|
+CONFIG_NLS_ISO8859_7=y
|
|
+CONFIG_NLS_ISO8859_9=y
|
|
+CONFIG_NLS_ISO8859_13=y
|
|
+CONFIG_NLS_ISO8859_14=y
|
|
+CONFIG_NLS_ISO8859_15=y
|
|
+CONFIG_NLS_KOI8_R=y
|
|
+CONFIG_NLS_KOI8_U=y
|
|
+CONFIG_NLS_UTF8=y
|
|
+
|
|
+#
|
|
+# Distributed Lock Manager
|
|
+#
|
|
+# CONFIG_DLM is not set
|
|
+
|
|
+#
|
|
+# Profiling support
|
|
+#
|
|
+# CONFIG_PROFILING is not set
|
|
+
|
|
+#
|
|
+# Kernel hacking
|
|
+#
|
|
+# CONFIG_PRINTK_TIME is not set
|
|
+CONFIG_ENABLE_MUST_CHECK=y
|
|
+CONFIG_MAGIC_SYSRQ=y
|
|
+CONFIG_UNUSED_SYMBOLS=y
|
|
+CONFIG_DEBUG_FS=y
|
|
+# CONFIG_HEADERS_CHECK is not set
|
|
+CONFIG_DEBUG_KERNEL=y
|
|
+# CONFIG_DEBUG_SHIRQ is not set
|
|
+CONFIG_DETECT_SOFTLOCKUP=y
|
|
+CONFIG_SCHED_DEBUG=y
|
|
+# CONFIG_SCHEDSTATS is not set
|
|
+# CONFIG_TIMER_STATS is not set
|
|
+# CONFIG_DEBUG_SLAB is not set
|
|
+CONFIG_DEBUG_PREEMPT=y
|
|
+# CONFIG_DEBUG_RT_MUTEXES is not set
|
|
+# CONFIG_RT_MUTEX_TESTER is not set
|
|
+# CONFIG_DEBUG_SPINLOCK is not set
|
|
+# CONFIG_DEBUG_MUTEXES is not set
|
|
+# CONFIG_DEBUG_LOCK_ALLOC is not set
|
|
+# CONFIG_PROVE_LOCKING is not set
|
|
+# CONFIG_LOCK_STAT is not set
|
|
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
|
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
|
+# CONFIG_DEBUG_KOBJECT is not set
|
|
+CONFIG_DEBUG_BUGVERBOSE=y
|
|
+# CONFIG_DEBUG_INFO is not set
|
|
+# CONFIG_DEBUG_VM is not set
|
|
+# CONFIG_DEBUG_LIST is not set
|
|
+CONFIG_FRAME_POINTER=y
|
|
+CONFIG_FORCED_INLINING=y
|
|
+# CONFIG_FAULT_INJECTION is not set
|
|
+# CONFIG_DEBUG_USER is not set
|
|
+# CONFIG_DEBUG_ERRORS is not set
|
|
+CONFIG_DEBUG_LL=y
|
|
+# CONFIG_DEBUG_ICEDCC is not set
|
|
+
|
|
+#
|
|
+# Security options
|
|
+#
|
|
+# CONFIG_KEYS is not set
|
|
+# CONFIG_SECURITY is not set
|
|
+# CONFIG_CRYPTO is not set
|
|
+
|
|
+#
|
|
+# Library routines
|
|
+#
|
|
+CONFIG_BITREVERSE=y
|
|
+# CONFIG_CRC_CCITT is not set
|
|
+# CONFIG_CRC16 is not set
|
|
+# CONFIG_CRC_ITU_T is not set
|
|
+CONFIG_CRC32=y
|
|
+# CONFIG_CRC7 is not set
|
|
+# CONFIG_LIBCRC32C is not set
|
|
+CONFIG_AUDIT_GENERIC=y
|
|
+CONFIG_ZLIB_INFLATE=y
|
|
+CONFIG_ZLIB_DEFLATE=y
|
|
+CONFIG_PLIST=y
|
|
+CONFIG_HAS_IOMEM=y
|
|
+CONFIG_HAS_IOPORT=y
|
|
+CONFIG_HAS_DMA=y
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach-at91/Kconfig
|
|
--- linux-2.6.24/arch/arm/mach-at91/Kconfig 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/Kconfig 2008-03-01 19:29:48.000000000 +0200
|
|
@@ -12,15 +12,28 @@
|
|
|
|
config ARCH_AT91SAM9260
|
|
bool "AT91SAM9260 or AT91SAM9XE"
|
|
+ select GENERIC_TIME
|
|
+ select GENERIC_CLOCKEVENTS
|
|
|
|
config ARCH_AT91SAM9261
|
|
bool "AT91SAM9261"
|
|
+ select GENERIC_TIME
|
|
+ select GENERIC_CLOCKEVENTS
|
|
|
|
config ARCH_AT91SAM9263
|
|
bool "AT91SAM9263"
|
|
+ select GENERIC_TIME
|
|
+ select GENERIC_CLOCKEVENTS
|
|
|
|
config ARCH_AT91SAM9RL
|
|
bool "AT91SAM9RL"
|
|
+ select GENERIC_TIME
|
|
+ select GENERIC_CLOCKEVENTS
|
|
+
|
|
+config ARCH_AT91CAP9
|
|
+ bool "AT91CAP9"
|
|
+ select GENERIC_TIME
|
|
+ select GENERIC_CLOCKEVENTS
|
|
|
|
config ARCH_AT91X40
|
|
bool "AT91x40"
|
|
@@ -42,7 +55,7 @@
|
|
depends on ARCH_AT91RM9200
|
|
help
|
|
Select this if you are using Ajeco's 1ARM Single Board Computer.
|
|
- <http://www.ajeco.fi/products.htm>
|
|
+ <http://www.ajeco.fi/eng/products_e.htm>
|
|
|
|
config ARCH_AT91RM9200DK
|
|
bool "Atmel AT91RM9200-DK Development board"
|
|
@@ -106,6 +119,32 @@
|
|
help
|
|
Select this if you are using Sperry-Sun's KAFA board.
|
|
|
|
+config MACH_CHUB
|
|
+ bool "Promwad Chub board"
|
|
+ depends on ARCH_AT91RM9200
|
|
+ help
|
|
+ Select this if you are using Promwad's Chub board.
|
|
+
|
|
+config MACH_HOMEMATIC
|
|
+ bool "eQ-3 HomeMatic"
|
|
+ depends on ARCH_AT91RM9200
|
|
+ help
|
|
+ Select this if you are using eQ-3's HomeMatic device.
|
|
+ <http://www.eq-3.com>
|
|
+
|
|
+config MACH_ECBAT91
|
|
+ bool "emQbit ECB_AT91 SBC"
|
|
+ depends on ARCH_AT91RM9200
|
|
+ help
|
|
+ Select this if you are using emQbit's ECB_AT91 board.
|
|
+ <http://wiki.emqbit.com/free-ecb-at91>
|
|
+
|
|
+config MACH_SWEDATMS
|
|
+ bool "Sweda TMS Board"
|
|
+ depends on ARCH_AT91RM9200
|
|
+ help
|
|
+ Select this if you are using Sweda TMS-100 board.
|
|
+
|
|
endif
|
|
|
|
# ----------------------------------------------------------
|
|
@@ -130,6 +169,20 @@
|
|
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
|
|
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
|
|
|
|
+config MACH_CAM60
|
|
+ bool "KwikByte CAM60 board"
|
|
+ depends on ARCH_AT91SAM9260
|
|
+ help
|
|
+ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260.
|
|
+ <http://www.kwikbyte.com>
|
|
+
|
|
+config MACH_SAM9_L9260
|
|
+ bool "Olimex SAM9-L9260 board"
|
|
+ depends on ARCH_AT91SAM9260
|
|
+ help
|
|
+ Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
|
|
+ http://www.olimex.com/dev/sam9-L9260.html
|
|
+
|
|
endif
|
|
|
|
# ----------------------------------------------------------
|
|
@@ -178,6 +231,21 @@
|
|
|
|
# ----------------------------------------------------------
|
|
|
|
+if ARCH_AT91CAP9
|
|
+
|
|
+comment "AT91CAP9 Board Type"
|
|
+
|
|
+config MACH_AT91CAP9ADK
|
|
+ bool "Atmel AT91CAP9A-DK Evaluation Kit"
|
|
+ depends on ARCH_AT91CAP9
|
|
+ help
|
|
+ Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
|
|
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
|
|
+
|
|
+endif
|
|
+
|
|
+# ----------------------------------------------------------
|
|
+
|
|
if ARCH_AT91X40
|
|
|
|
comment "AT91X40 Board Type"
|
|
@@ -198,13 +266,13 @@
|
|
|
|
config MTD_AT91_DATAFLASH_CARD
|
|
bool "Enable DataFlash Card support"
|
|
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
|
|
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
|
|
help
|
|
Enable support for the DataFlash card.
|
|
|
|
config MTD_NAND_AT91_BUSWIDTH_16
|
|
bool "Enable 16-bit data bus interface to NAND flash"
|
|
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
|
|
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
|
|
help
|
|
On AT91SAM926x boards both types of NAND flash can be present
|
|
(8 and 16 bit data bus width).
|
|
@@ -219,6 +287,65 @@
|
|
Select this if you need to program one or more of the PCK0..PCK3
|
|
programmable clock outputs.
|
|
|
|
+config AT91_SLOW_CLOCK
|
|
+ bool "Suspend-to-RAM disables main oscillator"
|
|
+ depends on SUSPEND
|
|
+ help
|
|
+ Select this if you want Suspend-to-RAM to save the most power
|
|
+ possible (without powering off the CPU) by disabling the PLLs
|
|
+ and main oscillator so that only the 32 KiHz clock is available.
|
|
+
|
|
+ When only that slow-clock is available, some peripherals lose
|
|
+ functionality. Many can't issue wakeup events unless faster
|
|
+ clocks are available. Some lose their operating state and
|
|
+ need to be completely re-initialized.
|
|
+
|
|
+config AT91_TIMER_HZ
|
|
+ int "Kernel HZ (jiffies per second)"
|
|
+ range 32 1024
|
|
+ depends on ARCH_AT91
|
|
+ default "128" if ARCH_AT91RM9200
|
|
+ default "100"
|
|
+ help
|
|
+ On AT91rm9200 chips where you're using a system clock derived
|
|
+ from the 32768 Hz hardware clock, this tick rate should divide
|
|
+ it exactly: use a power-of-two value, such as 128 or 256, to
|
|
+ reduce timing errors caused by rounding.
|
|
+
|
|
+ On AT91sam926x chips, or otherwise using a higher precision
|
|
+ system clock (of at least several MHz), rounding is less of a
|
|
+ problem so it can be safer to use a decimal values like 100.
|
|
+
|
|
+choice
|
|
+ prompt "Select a UART for early kernel messages"
|
|
+
|
|
+config AT91_EARLY_DBGU
|
|
+ bool "DBGU"
|
|
+
|
|
+config AT91_EARLY_USART0
|
|
+ bool "USART0"
|
|
+
|
|
+config AT91_EARLY_USART1
|
|
+ bool "USART1"
|
|
+
|
|
+config AT91_EARLY_USART2
|
|
+ bool "USART2"
|
|
+ depends on ! ARCH_AT91X40
|
|
+
|
|
+config AT91_EARLY_USART3
|
|
+ bool "USART3"
|
|
+ depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260)
|
|
+
|
|
+config AT91_EARLY_USART4
|
|
+ bool "USART4"
|
|
+ depends on ARCH_AT91SAM9260
|
|
+
|
|
+config AT91_EARLY_USART5
|
|
+ bool "USART5"
|
|
+ depends on ARCH_AT91SAM9260
|
|
+
|
|
+endchoice
|
|
+
|
|
endmenu
|
|
|
|
endif
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mach-at91/Makefile
|
|
--- linux-2.6.24/arch/arm/mach-at91/Makefile 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/Makefile 2008-03-01 18:45:33.000000000 +0200
|
|
@@ -8,7 +8,6 @@
|
|
obj- :=
|
|
|
|
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
|
|
-obj-$(CONFIG_PM) += pm.o
|
|
|
|
# CPU-specific support
|
|
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
|
|
@@ -16,6 +15,7 @@
|
|
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
|
|
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
|
|
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
|
|
+obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
|
|
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
|
|
|
|
# AT91RM9200 board-specific support
|
|
@@ -28,11 +28,16 @@
|
|
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
|
|
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
|
|
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
|
|
+obj-$(CONFIG_MACH_CHUB) += board-chub.o
|
|
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
|
|
-obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
|
|
+obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o
|
|
+obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
|
|
+obj-$(CONFIG_MACH_SWEDATMS) += board-tms.o
|
|
|
|
# AT91SAM9260 board-specific support
|
|
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
|
|
+obj-$(CONFIG_MACH_CAM60) += board-cam60.o
|
|
+obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
|
|
|
|
# AT91SAM9261 board-specific support
|
|
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
|
|
@@ -43,19 +48,19 @@
|
|
# AT91SAM9RL board-specific support
|
|
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
|
|
|
|
-# LEDs support
|
|
-led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
|
|
-led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
|
|
-led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
|
|
-led-$(CONFIG_MACH_CSB337) += leds.o
|
|
-led-$(CONFIG_MACH_CSB637) += leds.o
|
|
-led-$(CONFIG_MACH_KB9200) += leds.o
|
|
-led-$(CONFIG_MACH_KAFA) += leds.o
|
|
-obj-$(CONFIG_LEDS) += $(led-y)
|
|
+# AT91CAP9 board-specific support
|
|
+obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
|
|
|
|
-# VGA support
|
|
-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
|
|
+# AT91X40 board-specific support
|
|
+obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
|
|
|
|
+# Drivers
|
|
+obj-y += leds.o
|
|
+obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
|
|
+
|
|
+# Power Management
|
|
+obj-$(CONFIG_PM) += pm.o
|
|
+obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
|
|
|
|
ifeq ($(CONFIG_PM_DEBUG),y)
|
|
CFLAGS_pm.o += -DDEBUG
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Makefile.boot linux-2.6/arch/arm/mach-at91/Makefile.boot
|
|
--- linux-2.6.24/arch/arm/mach-at91/Makefile.boot 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/Makefile.boot 2008-01-16 20:26:54.000000000 +0200
|
|
@@ -3,7 +3,12 @@
|
|
# PARAMS_PHYS must be within 4MB of ZRELADDR
|
|
# INITRD_PHYS must be in RAM
|
|
|
|
+ifeq ($(CONFIG_ARCH_AT91CAP9),y)
|
|
+ zreladdr-y := 0x70008000
|
|
+params_phys-y := 0x70000100
|
|
+initrd_phys-y := 0x70410000
|
|
+else
|
|
zreladdr-y := 0x20008000
|
|
params_phys-y := 0x20000100
|
|
initrd_phys-y := 0x20410000
|
|
-
|
|
+endif
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/mach-at91/at91cap9.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91cap9.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91cap9.c 2008-03-01 19:34:19.000000000 +0200
|
|
@@ -0,0 +1,374 @@
|
|
+/*
|
|
+ * arch/arm/mach-at91/at91cap9.c
|
|
+ *
|
|
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
|
|
+ * Copyright (C) 2007 Atmel Corporation.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/pm.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/arch/at91cap9.h>
|
|
+#include <asm/arch/at91_pmc.h>
|
|
+#include <asm/arch/at91_rstc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
+
|
|
+#include "generic.h"
|
|
+#include "clock.h"
|
|
+
|
|
+static struct map_desc at91cap9_io_desc[] __initdata = {
|
|
+ {
|
|
+ .virtual = AT91_VA_BASE_SYS,
|
|
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
|
|
+ .length = SZ_16K,
|
|
+ .type = MT_DEVICE,
|
|
+ }, {
|
|
+ .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
|
|
+ .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE),
|
|
+ .length = AT91CAP9_SRAM_SIZE,
|
|
+ .type = MT_DEVICE,
|
|
+ },
|
|
+};
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Clocks
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+/*
|
|
+ * The peripheral clocks.
|
|
+ */
|
|
+static struct clk pioABCD_clk = {
|
|
+ .name = "pioABCD_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk mpb0_clk = {
|
|
+ .name = "mpb0_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_MPB0,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk mpb1_clk = {
|
|
+ .name = "mpb1_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_MPB1,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk mpb2_clk = {
|
|
+ .name = "mpb2_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_MPB2,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk mpb3_clk = {
|
|
+ .name = "mpb3_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_MPB3,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk mpb4_clk = {
|
|
+ .name = "mpb4_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_MPB4,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk usart0_clk = {
|
|
+ .name = "usart0_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_US0,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk usart1_clk = {
|
|
+ .name = "usart1_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_US1,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk usart2_clk = {
|
|
+ .name = "usart2_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_US2,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk mmc0_clk = {
|
|
+ .name = "mci0_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_MCI0,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk mmc1_clk = {
|
|
+ .name = "mci1_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_MCI1,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk can_clk = {
|
|
+ .name = "can_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_CAN,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk twi_clk = {
|
|
+ .name = "twi_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_TWI,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk spi0_clk = {
|
|
+ .name = "spi0_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_SPI0,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk spi1_clk = {
|
|
+ .name = "spi1_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_SPI1,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk ssc0_clk = {
|
|
+ .name = "ssc0_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_SSC0,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk ssc1_clk = {
|
|
+ .name = "ssc1_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_SSC1,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk ac97_clk = {
|
|
+ .name = "ac97_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_AC97C,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk tcb_clk = {
|
|
+ .name = "tcb_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_TCB,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk pwmc_clk = {
|
|
+ .name = "pwmc_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_PWMC,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk macb_clk = {
|
|
+ .name = "macb_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_EMAC,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk aestdes_clk = {
|
|
+ .name = "aestdes_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk adc_clk = {
|
|
+ .name = "adc_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_ADC,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk isi_clk = {
|
|
+ .name = "isi_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_ISI,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk lcdc_clk = {
|
|
+ .name = "lcdc_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_LCDC,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk dma_clk = {
|
|
+ .name = "dma_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_DMA,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk udphs_clk = {
|
|
+ .name = "udphs_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+static struct clk ohci_clk = {
|
|
+ .name = "ohci_clk",
|
|
+ .pmc_mask = 1 << AT91CAP9_ID_UHP,
|
|
+ .type = CLK_TYPE_PERIPHERAL,
|
|
+};
|
|
+
|
|
+static struct clk *periph_clocks[] __initdata = {
|
|
+ &pioABCD_clk,
|
|
+ &mpb0_clk,
|
|
+ &mpb1_clk,
|
|
+ &mpb2_clk,
|
|
+ &mpb3_clk,
|
|
+ &mpb4_clk,
|
|
+ &usart0_clk,
|
|
+ &usart1_clk,
|
|
+ &usart2_clk,
|
|
+ &mmc0_clk,
|
|
+ &mmc1_clk,
|
|
+ &can_clk,
|
|
+ &twi_clk,
|
|
+ &spi0_clk,
|
|
+ &spi1_clk,
|
|
+ &ssc0_clk,
|
|
+ &ssc1_clk,
|
|
+ &ac97_clk,
|
|
+ &tcb_clk,
|
|
+ &pwmc_clk,
|
|
+ &macb_clk,
|
|
+ &aestdes_clk,
|
|
+ &adc_clk,
|
|
+ &isi_clk,
|
|
+ &lcdc_clk,
|
|
+ &dma_clk,
|
|
+ &udphs_clk,
|
|
+ &ohci_clk,
|
|
+ // irq0 .. irq1
|
|
+};
|
|
+
|
|
+/*
|
|
+ * The four programmable clocks.
|
|
+ * You must configure pin multiplexing to bring these signals out.
|
|
+ */
|
|
+static struct clk pck0 = {
|
|
+ .name = "pck0",
|
|
+ .pmc_mask = AT91_PMC_PCK0,
|
|
+ .type = CLK_TYPE_PROGRAMMABLE,
|
|
+ .id = 0,
|
|
+};
|
|
+static struct clk pck1 = {
|
|
+ .name = "pck1",
|
|
+ .pmc_mask = AT91_PMC_PCK1,
|
|
+ .type = CLK_TYPE_PROGRAMMABLE,
|
|
+ .id = 1,
|
|
+};
|
|
+static struct clk pck2 = {
|
|
+ .name = "pck2",
|
|
+ .pmc_mask = AT91_PMC_PCK2,
|
|
+ .type = CLK_TYPE_PROGRAMMABLE,
|
|
+ .id = 2,
|
|
+};
|
|
+static struct clk pck3 = {
|
|
+ .name = "pck3",
|
|
+ .pmc_mask = AT91_PMC_PCK3,
|
|
+ .type = CLK_TYPE_PROGRAMMABLE,
|
|
+ .id = 3,
|
|
+};
|
|
+
|
|
+static void __init at91cap9_register_clocks(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
|
|
+ clk_register(periph_clocks[i]);
|
|
+
|
|
+ clk_register(&pck0);
|
|
+ clk_register(&pck1);
|
|
+ clk_register(&pck2);
|
|
+ clk_register(&pck3);
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * GPIO
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static struct at91_gpio_bank at91cap9_gpio[] = {
|
|
+ {
|
|
+ .id = AT91CAP9_ID_PIOABCD,
|
|
+ .offset = AT91_PIOA,
|
|
+ .clock = &pioABCD_clk,
|
|
+ }, {
|
|
+ .id = AT91CAP9_ID_PIOABCD,
|
|
+ .offset = AT91_PIOB,
|
|
+ .clock = &pioABCD_clk,
|
|
+ }, {
|
|
+ .id = AT91CAP9_ID_PIOABCD,
|
|
+ .offset = AT91_PIOC,
|
|
+ .clock = &pioABCD_clk,
|
|
+ }, {
|
|
+ .id = AT91CAP9_ID_PIOABCD,
|
|
+ .offset = AT91_PIOD,
|
|
+ .clock = &pioABCD_clk,
|
|
+ }
|
|
+};
|
|
+
|
|
+static void at91cap9_reset(void)
|
|
+{
|
|
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
|
|
+}
|
|
+
|
|
+static void at91cap9_poweroff(void)
|
|
+{
|
|
+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
|
|
+}
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * AT91CAP9 processor initialization
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+void __init at91cap9_initialize(unsigned long main_clock)
|
|
+{
|
|
+ /* Map peripherals */
|
|
+ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
|
|
+
|
|
+ at91_arch_reset = at91cap9_reset;
|
|
+ pm_power_off = at91cap9_poweroff;
|
|
+ at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
|
|
+
|
|
+ /* Init clock subsystem */
|
|
+ at91_clock_init(main_clock);
|
|
+
|
|
+ /* Register the processor-specific clocks */
|
|
+ at91cap9_register_clocks();
|
|
+
|
|
+ /* Register GPIO subsystem */
|
|
+ at91_gpio_init(at91cap9_gpio, 4);
|
|
+}
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Interrupt initialization
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+/*
|
|
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
|
|
+ */
|
|
+static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
+ 7, /* Advanced Interrupt Controller (FIQ) */
|
|
+ 7, /* System Peripherals */
|
|
+ 1, /* Parallel IO Controller A, B, C and D */
|
|
+ 0, /* MP Block Peripheral 0 */
|
|
+ 0, /* MP Block Peripheral 1 */
|
|
+ 0, /* MP Block Peripheral 2 */
|
|
+ 0, /* MP Block Peripheral 3 */
|
|
+ 0, /* MP Block Peripheral 4 */
|
|
+ 5, /* USART 0 */
|
|
+ 5, /* USART 1 */
|
|
+ 5, /* USART 2 */
|
|
+ 0, /* Multimedia Card Interface 0 */
|
|
+ 0, /* Multimedia Card Interface 1 */
|
|
+ 3, /* CAN */
|
|
+ 6, /* Two-Wire Interface */
|
|
+ 5, /* Serial Peripheral Interface 0 */
|
|
+ 5, /* Serial Peripheral Interface 1 */
|
|
+ 4, /* Serial Synchronous Controller 0 */
|
|
+ 4, /* Serial Synchronous Controller 1 */
|
|
+ 5, /* AC97 Controller */
|
|
+ 0, /* Timer Counter 0, 1 and 2 */
|
|
+ 0, /* Pulse Width Modulation Controller */
|
|
+ 3, /* Ethernet */
|
|
+ 0, /* Advanced Encryption Standard, Triple DES*/
|
|
+ 0, /* Analog-to-Digital Converter */
|
|
+ 0, /* Image Sensor Interface */
|
|
+ 3, /* LCD Controller */
|
|
+ 0, /* DMA Controller */
|
|
+ 2, /* USB Device Port */
|
|
+ 2, /* USB Host port */
|
|
+ 0, /* Advanced Interrupt Controller (IRQ0) */
|
|
+ 0, /* Advanced Interrupt Controller (IRQ1) */
|
|
+};
|
|
+
|
|
+void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
|
|
+{
|
|
+ if (!priority)
|
|
+ priority = at91cap9_default_irq_priority;
|
|
+
|
|
+ /* Initialize the AIC interrupt controller */
|
|
+ at91_aic_init(priority);
|
|
+
|
|
+ /* Enable GPIO interrupts */
|
|
+ at91_gpio_irq_setup();
|
|
+}
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/arch/arm/mach-at91/at91cap9_devices.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91cap9_devices.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91cap9_devices.c 2008-03-01 20:41:49.000000000 +0200
|
|
@@ -0,0 +1,1119 @@
|
|
+/*
|
|
+ * arch/arm/mach-at91/at91cap9_devices.c
|
|
+ *
|
|
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
|
|
+ * Copyright (C) 2007 Atmel Corporation.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ */
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/i2c-gpio.h>
|
|
+
|
|
+#include <video/atmel_lcdc.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+#include <asm/arch/at91cap9.h>
|
|
+#include <asm/arch/at91sam926x_smc.h>
|
|
+#include <asm/arch/at91cap9_matrix.h>
|
|
+
|
|
+#include "generic.h"
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * USB Host
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
|
|
+static struct at91_usbh_data usbh_data;
|
|
+
|
|
+static struct resource usbh_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_UHP_BASE,
|
|
+ .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_UHP,
|
|
+ .end = AT91CAP9_ID_UHP,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91_usbh_device = {
|
|
+ .name = "at91_ohci",
|
|
+ .id = -1,
|
|
+ .dev = {
|
|
+ .dma_mask = &ohci_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &usbh_data,
|
|
+ },
|
|
+ .resource = usbh_resources,
|
|
+ .num_resources = ARRAY_SIZE(usbh_resources),
|
|
+};
|
|
+
|
|
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ if (!data)
|
|
+ return;
|
|
+
|
|
+ /* Enable VBus control for UHP ports */
|
|
+ for (i = 0; i < data->ports; i++) {
|
|
+ if (data->vbus_pin[i])
|
|
+ at91_set_gpio_output(data->vbus_pin[i], 0);
|
|
+ }
|
|
+
|
|
+ usbh_data = *data;
|
|
+ platform_device_register(&at91_usbh_device);
|
|
+}
|
|
+#else
|
|
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Ethernet
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
|
|
+static u64 eth_dmamask = DMA_BIT_MASK(32);
|
|
+static struct at91_eth_data eth_data;
|
|
+
|
|
+static struct resource eth_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_EMAC,
|
|
+ .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_EMAC,
|
|
+ .end = AT91CAP9_ID_EMAC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_eth_device = {
|
|
+ .name = "macb",
|
|
+ .id = -1,
|
|
+ .dev = {
|
|
+ .dma_mask = ð_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = ð_data,
|
|
+ },
|
|
+ .resource = eth_resources,
|
|
+ .num_resources = ARRAY_SIZE(eth_resources),
|
|
+};
|
|
+
|
|
+void __init at91_add_device_eth(struct at91_eth_data *data)
|
|
+{
|
|
+ if (!data)
|
|
+ return;
|
|
+
|
|
+ if (data->phy_irq_pin) {
|
|
+ at91_set_gpio_input(data->phy_irq_pin, 0);
|
|
+ at91_set_deglitch(data->phy_irq_pin, 1);
|
|
+ }
|
|
+
|
|
+ /* Pins used for MII and RMII */
|
|
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
|
|
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
|
|
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
|
|
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
|
|
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
|
|
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
|
|
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
|
|
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
|
|
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
|
|
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
|
|
+
|
|
+ if (!data->is_rmii) {
|
|
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
|
|
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
|
|
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
|
|
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
|
|
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
|
|
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
|
|
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
|
|
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
|
|
+ }
|
|
+
|
|
+ eth_data = *data;
|
|
+ platform_device_register(&at91cap9_eth_device);
|
|
+}
|
|
+#else
|
|
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * MMC / SD
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
|
|
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
|
|
+static struct at91_mmc_data mmc0_data, mmc1_data;
|
|
+
|
|
+static struct resource mmc0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_MCI0,
|
|
+ .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_MCI0,
|
|
+ .end = AT91CAP9_ID_MCI0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_mmc0_device = {
|
|
+ .name = "at91_mci",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &mmc_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &mmc0_data,
|
|
+ },
|
|
+ .resource = mmc0_resources,
|
|
+ .num_resources = ARRAY_SIZE(mmc0_resources),
|
|
+};
|
|
+
|
|
+static struct resource mmc1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_MCI1,
|
|
+ .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_MCI1,
|
|
+ .end = AT91CAP9_ID_MCI1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_mmc1_device = {
|
|
+ .name = "at91_mci",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .dma_mask = &mmc_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &mmc1_data,
|
|
+ },
|
|
+ .resource = mmc1_resources,
|
|
+ .num_resources = ARRAY_SIZE(mmc1_resources),
|
|
+};
|
|
+
|
|
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
|
|
+{
|
|
+ if (!data)
|
|
+ return;
|
|
+
|
|
+ /* input/irq */
|
|
+ if (data->det_pin) {
|
|
+ at91_set_gpio_input(data->det_pin, 1);
|
|
+ at91_set_deglitch(data->det_pin, 1);
|
|
+ }
|
|
+ if (data->wp_pin)
|
|
+ at91_set_gpio_input(data->wp_pin, 1);
|
|
+ if (data->vcc_pin)
|
|
+ at91_set_gpio_output(data->vcc_pin, 0);
|
|
+
|
|
+ if (mmc_id == 0) { /* MCI0 */
|
|
+ /* CLK */
|
|
+ at91_set_A_periph(AT91_PIN_PA2, 0);
|
|
+
|
|
+ /* CMD */
|
|
+ at91_set_A_periph(AT91_PIN_PA1, 1);
|
|
+
|
|
+ /* DAT0, maybe DAT1..DAT3 */
|
|
+ at91_set_A_periph(AT91_PIN_PA0, 1);
|
|
+ if (data->wire4) {
|
|
+ at91_set_A_periph(AT91_PIN_PA3, 1);
|
|
+ at91_set_A_periph(AT91_PIN_PA4, 1);
|
|
+ at91_set_A_periph(AT91_PIN_PA5, 1);
|
|
+ }
|
|
+
|
|
+ mmc0_data = *data;
|
|
+ at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
|
|
+ platform_device_register(&at91cap9_mmc0_device);
|
|
+ } else { /* MCI1 */
|
|
+ /* CLK */
|
|
+ at91_set_A_periph(AT91_PIN_PA16, 0);
|
|
+
|
|
+ /* CMD */
|
|
+ at91_set_A_periph(AT91_PIN_PA17, 1);
|
|
+
|
|
+ /* DAT0, maybe DAT1..DAT3 */
|
|
+ at91_set_A_periph(AT91_PIN_PA18, 1);
|
|
+ if (data->wire4) {
|
|
+ at91_set_A_periph(AT91_PIN_PA19, 1);
|
|
+ at91_set_A_periph(AT91_PIN_PA20, 1);
|
|
+ at91_set_A_periph(AT91_PIN_PA21, 1);
|
|
+ }
|
|
+
|
|
+ mmc1_data = *data;
|
|
+ at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
|
|
+ platform_device_register(&at91cap9_mmc1_device);
|
|
+ }
|
|
+}
|
|
+#else
|
|
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * NAND / SmartMedia
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
|
|
+static struct at91_nand_data nand_data;
|
|
+
|
|
+#define NAND_BASE AT91_CHIPSELECT_3
|
|
+
|
|
+static struct resource nand_resources[] = {
|
|
+ [0] = {
|
|
+ .start = NAND_BASE,
|
|
+ .end = NAND_BASE + SZ_256M - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91_BASE_SYS + AT91_ECC,
|
|
+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_nand_device = {
|
|
+ .name = "at91_nand",
|
|
+ .id = -1,
|
|
+ .dev = {
|
|
+ .platform_data = &nand_data,
|
|
+ },
|
|
+ .resource = nand_resources,
|
|
+ .num_resources = ARRAY_SIZE(nand_resources),
|
|
+};
|
|
+
|
|
+void __init at91_add_device_nand(struct at91_nand_data *data)
|
|
+{
|
|
+ unsigned long csa, mode;
|
|
+
|
|
+ if (!data)
|
|
+ return;
|
|
+
|
|
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
|
|
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
|
|
+
|
|
+ /* set the bus interface characteristics */
|
|
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
|
|
+ | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
|
|
+
|
|
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
|
|
+ | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
|
|
+
|
|
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
|
|
+
|
|
+ if (data->bus_width_16)
|
|
+ mode = AT91_SMC_DBW_16;
|
|
+ else
|
|
+ mode = AT91_SMC_DBW_8;
|
|
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
|
|
+
|
|
+ /* enable pin */
|
|
+ if (data->enable_pin)
|
|
+ at91_set_gpio_output(data->enable_pin, 1);
|
|
+
|
|
+ /* ready/busy pin */
|
|
+ if (data->rdy_pin)
|
|
+ at91_set_gpio_input(data->rdy_pin, 1);
|
|
+
|
|
+ /* card detect pin */
|
|
+ if (data->det_pin)
|
|
+ at91_set_gpio_input(data->det_pin, 1);
|
|
+
|
|
+ nand_data = *data;
|
|
+ platform_device_register(&at91cap9_nand_device);
|
|
+}
|
|
+#else
|
|
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * TWI (i2c)
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+/*
|
|
+ * Prefer the GPIO code since the TWI controller isn't robust
|
|
+ * (gets overruns and underruns under load) and can only issue
|
|
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
|
|
+ */
|
|
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
|
|
+
|
|
+static struct i2c_gpio_platform_data pdata = {
|
|
+ .sda_pin = AT91_PIN_PB4,
|
|
+ .sda_is_open_drain = 1,
|
|
+ .scl_pin = AT91_PIN_PB5,
|
|
+ .scl_is_open_drain = 1,
|
|
+ .udelay = 2, /* ~100 kHz */
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_twi_device = {
|
|
+ .name = "i2c-gpio",
|
|
+ .id = -1,
|
|
+ .dev.platform_data = &pdata,
|
|
+};
|
|
+
|
|
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
|
|
+{
|
|
+ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
|
|
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
|
|
+
|
|
+ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
|
|
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
|
|
+
|
|
+ i2c_register_board_info(0, devices, nr_devices);
|
|
+ platform_device_register(&at91cap9_twi_device);
|
|
+}
|
|
+
|
|
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
|
|
+
|
|
+static struct resource twi_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_TWI,
|
|
+ .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_TWI,
|
|
+ .end = AT91CAP9_ID_TWI,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_twi_device = {
|
|
+ .name = "at91_i2c",
|
|
+ .id = -1,
|
|
+ .resource = twi_resources,
|
|
+ .num_resources = ARRAY_SIZE(twi_resources),
|
|
+};
|
|
+
|
|
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
|
|
+{
|
|
+ /* pins used for TWI interface */
|
|
+ at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
|
|
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
|
|
+
|
|
+ at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
|
|
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
|
|
+
|
|
+ i2c_register_board_info(0, devices, nr_devices);
|
|
+ platform_device_register(&at91cap9_twi_device);
|
|
+}
|
|
+#else
|
|
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
|
|
+#endif
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * SPI
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
|
+static u64 spi_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource spi0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_SPI0,
|
|
+ .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_SPI0,
|
|
+ .end = AT91CAP9_ID_SPI0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_spi0_device = {
|
|
+ .name = "atmel_spi",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &spi_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = spi0_resources,
|
|
+ .num_resources = ARRAY_SIZE(spi0_resources),
|
|
+};
|
|
+
|
|
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
|
|
+
|
|
+static struct resource spi1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_SPI1,
|
|
+ .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_SPI1,
|
|
+ .end = AT91CAP9_ID_SPI1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_spi1_device = {
|
|
+ .name = "atmel_spi",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .dma_mask = &spi_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = spi1_resources,
|
|
+ .num_resources = ARRAY_SIZE(spi1_resources),
|
|
+};
|
|
+
|
|
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
|
|
+
|
|
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
|
|
+{
|
|
+ int i;
|
|
+ unsigned long cs_pin;
|
|
+ short enable_spi0 = 0;
|
|
+ short enable_spi1 = 0;
|
|
+
|
|
+ /* Choose SPI chip-selects */
|
|
+ for (i = 0; i < nr_devices; i++) {
|
|
+ if (devices[i].controller_data)
|
|
+ cs_pin = (unsigned long) devices[i].controller_data;
|
|
+ else if (devices[i].bus_num == 0)
|
|
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
|
|
+ else
|
|
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
|
|
+
|
|
+ if (devices[i].bus_num == 0)
|
|
+ enable_spi0 = 1;
|
|
+ else
|
|
+ enable_spi1 = 1;
|
|
+
|
|
+ /* enable chip-select pin */
|
|
+ at91_set_gpio_output(cs_pin, 1);
|
|
+
|
|
+ /* pass chip-select pin to driver */
|
|
+ devices[i].controller_data = (void *) cs_pin;
|
|
+ }
|
|
+
|
|
+ spi_register_board_info(devices, nr_devices);
|
|
+
|
|
+ /* Configure SPI bus(es) */
|
|
+ if (enable_spi0) {
|
|
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
|
|
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
|
|
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
|
|
+
|
|
+ at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
|
|
+ platform_device_register(&at91cap9_spi0_device);
|
|
+ }
|
|
+ if (enable_spi1) {
|
|
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
|
|
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
|
|
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
|
|
+
|
|
+ at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
|
|
+ platform_device_register(&at91cap9_spi1_device);
|
|
+ }
|
|
+}
|
|
+#else
|
|
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Timer/Counter block
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#ifdef CONFIG_ATMEL_TCLIB
|
|
+
|
|
+static struct resource tcb_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_TCB0,
|
|
+ .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_TCB,
|
|
+ .end = AT91CAP9_ID_TCB,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_tcb_device = {
|
|
+ .name = "atmel_tcb",
|
|
+ .id = 0,
|
|
+ .resource = tcb_resources,
|
|
+ .num_resources = ARRAY_SIZE(tcb_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_tc(void)
|
|
+{
|
|
+ /* this chip has one clock and irq for all three TC channels */
|
|
+ at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
|
|
+ platform_device_register(&at91cap9_tcb_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_tc(void) { }
|
|
+#endif
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * RTT
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static struct resource rtt_resources[] = {
|
|
+ {
|
|
+ .start = AT91_BASE_SYS + AT91_RTT,
|
|
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_rtt_device = {
|
|
+ .name = "at91_rtt",
|
|
+ .id = -1,
|
|
+ .resource = rtt_resources,
|
|
+ .num_resources = ARRAY_SIZE(rtt_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_rtt(void)
|
|
+{
|
|
+ device_init_wakeup(&at91cap9_rtt_device.dev, 1);
|
|
+ platform_device_register(&at91cap9_rtt_device);
|
|
+}
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Watchdog
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
|
|
+static struct platform_device at91cap9_wdt_device = {
|
|
+ .name = "at91_wdt",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_watchdog(void)
|
|
+{
|
|
+ platform_device_register(&at91cap9_wdt_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_watchdog(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * AC97
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
|
|
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
|
|
+static struct atmel_ac97_data ac97_data;
|
|
+
|
|
+static struct resource ac97_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_AC97C,
|
|
+ .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_AC97C,
|
|
+ .end = AT91CAP9_ID_AC97C,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_ac97_device = {
|
|
+ .name = "ac97c",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .dma_mask = &ac97_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &ac97_data,
|
|
+ },
|
|
+ .resource = ac97_resources,
|
|
+ .num_resources = ARRAY_SIZE(ac97_resources),
|
|
+};
|
|
+
|
|
+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
|
|
+{
|
|
+ if (!data)
|
|
+ return;
|
|
+
|
|
+ at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
|
|
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
|
|
+ at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
|
|
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
|
|
+
|
|
+ /* reset */
|
|
+ if (data->reset_pin)
|
|
+ at91_set_gpio_output(data->reset_pin, 0);
|
|
+
|
|
+ ac97_data = *data;
|
|
+ platform_device_register(&at91cap9_ac97_device);
|
|
+}
|
|
+#else
|
|
+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * LCD Controller
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
|
|
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
|
|
+static struct atmel_lcdfb_info lcdc_data;
|
|
+
|
|
+static struct resource lcdc_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_LCDC_BASE,
|
|
+ .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_LCDC,
|
|
+ .end = AT91CAP9_ID_LCDC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91_lcdc_device = {
|
|
+ .name = "atmel_lcdfb",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &lcdc_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &lcdc_data,
|
|
+ },
|
|
+ .resource = lcdc_resources,
|
|
+ .num_resources = ARRAY_SIZE(lcdc_resources),
|
|
+};
|
|
+
|
|
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
|
|
+{
|
|
+ if (!data)
|
|
+ return;
|
|
+
|
|
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
|
|
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
|
|
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
|
|
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
|
|
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
|
|
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
|
|
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
|
|
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
|
|
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
|
|
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
|
|
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
|
|
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
|
|
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
|
|
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
|
|
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
|
|
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
|
|
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
|
|
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
|
|
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
|
|
+ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
|
|
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
|
|
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
|
|
+
|
|
+ lcdc_data = *data;
|
|
+ platform_device_register(&at91_lcdc_device);
|
|
+}
|
|
+#else
|
|
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * SSC -- Synchronous Serial Controller
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
|
|
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_SSC0,
|
|
+ .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_SSC0,
|
|
+ .end = AT91CAP9_ID_SSC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_ssc0_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc0_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc0_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc0_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_A_periph(AT91_PIN_PB0, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_A_periph(AT91_PIN_PB1, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_A_periph(AT91_PIN_PB2, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_A_periph(AT91_PIN_PB3, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_A_periph(AT91_PIN_PB4, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_A_periph(AT91_PIN_PB5, 1);
|
|
+}
|
|
+
|
|
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_SSC1,
|
|
+ .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_SSC1,
|
|
+ .end = AT91CAP9_ID_SSC1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91cap9_ssc1_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc1_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc1_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc1_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_A_periph(AT91_PIN_PB6, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_A_periph(AT91_PIN_PB7, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_A_periph(AT91_PIN_PB8, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_A_periph(AT91_PIN_PB9, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_A_periph(AT91_PIN_PB10, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_A_periph(AT91_PIN_PB11, 1);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * SSC controllers are accessed through library code, instead of any
|
|
+ * kind of all-singing/all-dancing driver. For example one could be
|
|
+ * used by a particular I2S audio codec's driver, while another one
|
|
+ * on the same system might be used by a custom data capture driver.
|
|
+ */
|
|
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ /*
|
|
+ * NOTE: caller is responsible for passing information matching
|
|
+ * "pins" to whatever will be using each particular controller.
|
|
+ */
|
|
+ switch (id) {
|
|
+ case AT91CAP9_ID_SSC0:
|
|
+ pdev = &at91cap9_ssc0_device;
|
|
+ configure_ssc0_pins(pins);
|
|
+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
|
|
+ break;
|
|
+ case AT91CAP9_ID_SSC1:
|
|
+ pdev = &at91cap9_ssc1_device;
|
|
+ configure_ssc1_pins(pins);
|
|
+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ platform_device_register(pdev);
|
|
+}
|
|
+
|
|
+#else
|
|
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * UART
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_SERIAL_ATMEL)
|
|
+static struct resource dbgu_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
|
|
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91_ID_SYS,
|
|
+ .end = AT91_ID_SYS,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct atmel_uart_data dbgu_data = {
|
|
+ .use_dma_tx = 0,
|
|
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
|
|
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
|
|
+};
|
|
+
|
|
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct platform_device at91cap9_dbgu_device = {
|
|
+ .name = "atmel_usart",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &dbgu_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &dbgu_data,
|
|
+ },
|
|
+ .resource = dbgu_resources,
|
|
+ .num_resources = ARRAY_SIZE(dbgu_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_dbgu_pins(void)
|
|
+{
|
|
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
|
|
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
|
|
+}
|
|
+
|
|
+static struct resource uart0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_US0,
|
|
+ .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_US0,
|
|
+ .end = AT91CAP9_ID_US0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct atmel_uart_data uart0_data = {
|
|
+ .use_dma_tx = 1,
|
|
+ .use_dma_rx = 1,
|
|
+};
|
|
+
|
|
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct platform_device at91cap9_uart0_device = {
|
|
+ .name = "atmel_usart",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .dma_mask = &uart0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart0_data,
|
|
+ },
|
|
+ .resource = uart0_resources,
|
|
+ .num_resources = ARRAY_SIZE(uart0_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_usart0_pins(unsigned pins)
|
|
+{
|
|
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
|
|
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
|
|
+}
|
|
+
|
|
+static struct resource uart1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_US1,
|
|
+ .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_US1,
|
|
+ .end = AT91CAP9_ID_US1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct atmel_uart_data uart1_data = {
|
|
+ .use_dma_tx = 1,
|
|
+ .use_dma_rx = 1,
|
|
+};
|
|
+
|
|
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct platform_device at91cap9_uart1_device = {
|
|
+ .name = "atmel_usart",
|
|
+ .id = 2,
|
|
+ .dev = {
|
|
+ .dma_mask = &uart1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart1_data,
|
|
+ },
|
|
+ .resource = uart1_resources,
|
|
+ .num_resources = ARRAY_SIZE(uart1_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_usart1_pins(unsigned pins)
|
|
+{
|
|
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
|
|
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
|
|
+}
|
|
+
|
|
+static struct resource uart2_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91CAP9_BASE_US2,
|
|
+ .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91CAP9_ID_US2,
|
|
+ .end = AT91CAP9_ID_US2,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct atmel_uart_data uart2_data = {
|
|
+ .use_dma_tx = 1,
|
|
+ .use_dma_rx = 1,
|
|
+};
|
|
+
|
|
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct platform_device at91cap9_uart2_device = {
|
|
+ .name = "atmel_usart",
|
|
+ .id = 3,
|
|
+ .dev = {
|
|
+ .dma_mask = &uart2_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart2_data,
|
|
+ },
|
|
+ .resource = uart2_resources,
|
|
+ .num_resources = ARRAY_SIZE(uart2_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_usart2_pins(unsigned pins)
|
|
+{
|
|
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
|
|
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
|
|
+}
|
|
+
|
|
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
+struct platform_device *atmel_default_console_device; /* the serial console device */
|
|
+
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0: /* DBGU */
|
|
+ pdev = &at91cap9_dbgu_device;
|
|
+ configure_dbgu_pins();
|
|
+ at91_clock_associate("mck", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91CAP9_ID_US0:
|
|
+ pdev = &at91cap9_uart0_device;
|
|
+ configure_usart0_pins(pins);
|
|
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91CAP9_ID_US1:
|
|
+ pdev = &at91cap9_uart1_device;
|
|
+ configure_usart1_pins(pins);
|
|
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91CAP9_ID_US2:
|
|
+ pdev = &at91cap9_uart2_device;
|
|
+ configure_usart2_pins(pins);
|
|
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+ pdev->id = portnr; /* update to mapped ID */
|
|
+
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ at91_uarts[portnr] = pdev;
|
|
+}
|
|
+
|
|
+void __init at91_set_serial_console(unsigned portnr)
|
|
+{
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ atmel_default_console_device = at91_uarts[portnr];
|
|
+ if (!atmel_default_console_device)
|
|
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
+}
|
|
+
|
|
+void __init at91_add_device_serial(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
|
|
+ if (at91_uarts[i])
|
|
+ platform_device_register(at91_uarts[i]);
|
|
+ }
|
|
+}
|
|
+#else
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
|
|
+void __init at91_set_serial_console(unsigned portnr) {}
|
|
+void __init at91_add_device_serial(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* -------------------------------------------------------------------- */
|
|
+/*
|
|
+ * These devices are always present and don't need any board-specific
|
|
+ * setup.
|
|
+ */
|
|
+static int __init at91_add_standard_devices(void)
|
|
+{
|
|
+ at91_add_device_rtt();
|
|
+ at91_add_device_watchdog();
|
|
+ at91_add_device_tc();
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+arch_initcall(at91_add_standard_devices);
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200.c linux-2.6/arch/arm/mach-at91/at91rm9200.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91rm9200.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91rm9200.c 2008-03-01 18:46:49.000000000 +0200
|
|
@@ -301,28 +301,28 @@
|
|
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
7, /* Advanced Interrupt Controller (FIQ) */
|
|
7, /* System Peripherals */
|
|
- 0, /* Parallel IO Controller A */
|
|
- 0, /* Parallel IO Controller B */
|
|
- 0, /* Parallel IO Controller C */
|
|
- 0, /* Parallel IO Controller D */
|
|
- 6, /* USART 0 */
|
|
- 6, /* USART 1 */
|
|
- 6, /* USART 2 */
|
|
- 6, /* USART 3 */
|
|
+ 1, /* Parallel IO Controller A */
|
|
+ 1, /* Parallel IO Controller B */
|
|
+ 1, /* Parallel IO Controller C */
|
|
+ 1, /* Parallel IO Controller D */
|
|
+ 5, /* USART 0 */
|
|
+ 5, /* USART 1 */
|
|
+ 5, /* USART 2 */
|
|
+ 5, /* USART 3 */
|
|
0, /* Multimedia Card Interface */
|
|
- 4, /* USB Device Port */
|
|
- 0, /* Two-Wire Interface */
|
|
- 6, /* Serial Peripheral Interface */
|
|
- 5, /* Serial Synchronous Controller 0 */
|
|
- 5, /* Serial Synchronous Controller 1 */
|
|
- 5, /* Serial Synchronous Controller 2 */
|
|
+ 2, /* USB Device Port */
|
|
+ 6, /* Two-Wire Interface */
|
|
+ 5, /* Serial Peripheral Interface */
|
|
+ 4, /* Serial Synchronous Controller 0 */
|
|
+ 4, /* Serial Synchronous Controller 1 */
|
|
+ 4, /* Serial Synchronous Controller 2 */
|
|
0, /* Timer Counter 0 */
|
|
0, /* Timer Counter 1 */
|
|
0, /* Timer Counter 2 */
|
|
0, /* Timer Counter 3 */
|
|
0, /* Timer Counter 4 */
|
|
0, /* Timer Counter 5 */
|
|
- 3, /* USB Host port */
|
|
+ 2, /* USB Host port */
|
|
3, /* Ethernet MAC */
|
|
0, /* Advanced Interrupt Controller (IRQ0) */
|
|
0, /* Advanced Interrupt Controller (IRQ1) */
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-01 18:50:43.000000000 +0200
|
|
@@ -13,6 +13,7 @@
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c-gpio.h>
|
|
|
|
@@ -29,7 +30,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
-static u64 ohci_dmamask = 0xffffffffUL;
|
|
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_usbh_data usbh_data;
|
|
|
|
static struct resource usbh_resources[] = {
|
|
@@ -50,7 +51,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &ohci_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &usbh_data,
|
|
},
|
|
.resource = usbh_resources,
|
|
@@ -125,7 +126,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
|
|
-static u64 eth_dmamask = 0xffffffffUL;
|
|
+static u64 eth_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_eth_data eth_data;
|
|
|
|
static struct resource eth_resources[] = {
|
|
@@ -146,7 +147,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = ð_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = ð_data,
|
|
},
|
|
.resource = eth_resources,
|
|
@@ -285,7 +286,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
|
|
-static u64 mmc_dmamask = 0xffffffffUL;
|
|
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_mmc_data mmc_data;
|
|
|
|
static struct resource mmc_resources[] = {
|
|
@@ -306,7 +307,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc_data,
|
|
},
|
|
.resource = mmc_resources,
|
|
@@ -375,7 +376,7 @@
|
|
static struct resource nand_resources[] = {
|
|
{
|
|
.start = NAND_BASE,
|
|
- .end = NAND_BASE + SZ_8M - 1,
|
|
+ .end = NAND_BASE + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
@@ -512,8 +513,19 @@
|
|
* SPI
|
|
* -------------------------------------------------------------------- */
|
|
|
|
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
|
-static u64 spi_dmamask = 0xffffffffUL;
|
|
+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */
|
|
+#define SPI_DEVNAME "at91_spi"
|
|
+
|
|
+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */
|
|
+#define SPI_DEVNAME "at91_spi"
|
|
+
|
|
+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */
|
|
+#define SPI_DEVNAME "atmel_spi"
|
|
+
|
|
+#endif
|
|
+
|
|
+#ifdef SPI_DEVNAME
|
|
+static u64 spi_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource spi_resources[] = {
|
|
[0] = {
|
|
@@ -529,11 +541,11 @@
|
|
};
|
|
|
|
static struct platform_device at91rm9200_spi_device = {
|
|
- .name = "atmel_spi",
|
|
+ .name = SPI_DEVNAME,
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi_resources,
|
|
.num_resources = ARRAY_SIZE(spi_resources),
|
|
@@ -557,8 +569,17 @@
|
|
else
|
|
cs_pin = spi_standard_cs[devices[i].chip_select];
|
|
|
|
- /* enable chip-select pin */
|
|
- at91_set_gpio_output(cs_pin, 1);
|
|
+ if (devices[i].chip_select == 0) /* for CS0 errata */
|
|
+ at91_set_A_periph(cs_pin, 0);
|
|
+ else
|
|
+ at91_set_gpio_output(cs_pin, 1);
|
|
+
|
|
+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
|
|
+ /*
|
|
+ * Force peripheral mode when using the legacy SPI driver.
|
|
+ */
|
|
+ at91_set_A_periph(cs_pin, 0);
|
|
+#endif
|
|
|
|
/* pass chip-select pin to driver */
|
|
devices[i].controller_data = (void *) cs_pin;
|
|
@@ -573,6 +594,90 @@
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
+ * Timer/Counter blocks
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#ifdef CONFIG_ATMEL_TCLIB
|
|
+
|
|
+static struct resource tcb0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91RM9200_BASE_TCB0,
|
|
+ .end = AT91RM9200_BASE_TCB0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91RM9200_ID_TC0,
|
|
+ .end = AT91RM9200_ID_TC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [2] = {
|
|
+ .start = AT91RM9200_ID_TC1,
|
|
+ .end = AT91RM9200_ID_TC1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [3] = {
|
|
+ .start = AT91RM9200_ID_TC2,
|
|
+ .end = AT91RM9200_ID_TC2,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91rm9200_tcb0_device = {
|
|
+ .name = "atmel_tcb",
|
|
+ .id = 0,
|
|
+ .resource = tcb0_resources,
|
|
+ .num_resources = ARRAY_SIZE(tcb0_resources),
|
|
+};
|
|
+
|
|
+static struct resource tcb1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91RM9200_BASE_TCB1,
|
|
+ .end = AT91RM9200_BASE_TCB1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91RM9200_ID_TC3,
|
|
+ .end = AT91RM9200_ID_TC3,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [2] = {
|
|
+ .start = AT91RM9200_ID_TC4,
|
|
+ .end = AT91RM9200_ID_TC4,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [3] = {
|
|
+ .start = AT91RM9200_ID_TC5,
|
|
+ .end = AT91RM9200_ID_TC5,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91rm9200_tcb1_device = {
|
|
+ .name = "atmel_tcb",
|
|
+ .id = 1,
|
|
+ .resource = tcb1_resources,
|
|
+ .num_resources = ARRAY_SIZE(tcb1_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_tc(void)
|
|
+{
|
|
+ /* this chip has a separate clock and irq for each TC channel */
|
|
+ at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
|
|
+ at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
|
|
+ at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
|
|
+ platform_device_register(&at91rm9200_tcb0_device);
|
|
+
|
|
+ at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
|
|
+ at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
|
|
+ at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
|
|
+ platform_device_register(&at91rm9200_tcb1_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_tc(void) { }
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
* RTC
|
|
* -------------------------------------------------------------------- */
|
|
|
|
@@ -585,6 +690,7 @@
|
|
|
|
static void __init at91_add_device_rtc(void)
|
|
{
|
|
+ device_init_wakeup(&at91rm9200_rtc_device.dev, 1);
|
|
platform_device_register(&at91rm9200_rtc_device);
|
|
}
|
|
#else
|
|
@@ -613,24 +719,175 @@
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
- * LEDs
|
|
+ * SSC -- Synchronous Serial Controller
|
|
* -------------------------------------------------------------------- */
|
|
|
|
-#if defined(CONFIG_LEDS)
|
|
-u8 at91_leds_cpu;
|
|
-u8 at91_leds_timer;
|
|
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
|
|
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91RM9200_BASE_SSC0,
|
|
+ .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91RM9200_ID_SSC0,
|
|
+ .end = AT91RM9200_ID_SSC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91rm9200_ssc0_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc0_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc0_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc0_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_A_periph(AT91_PIN_PB0, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_A_periph(AT91_PIN_PB1, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_A_periph(AT91_PIN_PB2, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_A_periph(AT91_PIN_PB3, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_A_periph(AT91_PIN_PB4, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_A_periph(AT91_PIN_PB5, 1);
|
|
+}
|
|
+
|
|
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91RM9200_BASE_SSC1,
|
|
+ .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91RM9200_ID_SSC1,
|
|
+ .end = AT91RM9200_ID_SSC1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91rm9200_ssc1_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc1_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc1_resources),
|
|
+};
|
|
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
|
|
+static inline void configure_ssc1_pins(unsigned pins)
|
|
{
|
|
- /* Enable GPIO to access the LEDs */
|
|
- at91_set_gpio_output(cpu_led, 1);
|
|
- at91_set_gpio_output(timer_led, 1);
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_A_periph(AT91_PIN_PB6, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_A_periph(AT91_PIN_PB7, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_A_periph(AT91_PIN_PB8, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_A_periph(AT91_PIN_PB9, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_A_periph(AT91_PIN_PB10, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_A_periph(AT91_PIN_PB11, 1);
|
|
+}
|
|
+
|
|
+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
|
|
|
|
- at91_leds_cpu = cpu_led;
|
|
- at91_leds_timer = timer_led;
|
|
+static struct resource ssc2_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91RM9200_BASE_SSC2,
|
|
+ .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91RM9200_ID_SSC2,
|
|
+ .end = AT91RM9200_ID_SSC2,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91rm9200_ssc2_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 2,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc2_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc2_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc2_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc2_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_A_periph(AT91_PIN_PB12, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_A_periph(AT91_PIN_PB13, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_A_periph(AT91_PIN_PB14, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_A_periph(AT91_PIN_PB15, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_A_periph(AT91_PIN_PB16, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_A_periph(AT91_PIN_PB17, 1);
|
|
}
|
|
+
|
|
+/*
|
|
+ * SSC controllers are accessed through library code, instead of any
|
|
+ * kind of all-singing/all-dancing driver. For example one could be
|
|
+ * used by a particular I2S audio codec's driver, while another one
|
|
+ * on the same system might be used by a custom data capture driver.
|
|
+ */
|
|
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ /*
|
|
+ * NOTE: caller is responsible for passing information matching
|
|
+ * "pins" to whatever will be using each particular controller.
|
|
+ */
|
|
+ switch (id) {
|
|
+ case AT91RM9200_ID_SSC0:
|
|
+ pdev = &at91rm9200_ssc0_device;
|
|
+ configure_ssc0_pins(pins);
|
|
+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
|
|
+ break;
|
|
+ case AT91RM9200_ID_SSC1:
|
|
+ pdev = &at91rm9200_ssc1_device;
|
|
+ configure_ssc1_pins(pins);
|
|
+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
|
|
+ break;
|
|
+ case AT91RM9200_ID_SSC2:
|
|
+ pdev = &at91rm9200_ssc2_device;
|
|
+ configure_ssc2_pins(pins);
|
|
+ at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ platform_device_register(pdev);
|
|
+}
|
|
+
|
|
#else
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
|
|
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
|
|
#endif
|
|
|
|
|
|
@@ -657,13 +914,15 @@
|
|
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
|
|
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
|
|
};
|
|
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91rm9200_dbgu_device = {
|
|
.name = "atmel_usart",
|
|
.id = 0,
|
|
.dev = {
|
|
- .platform_data = &dbgu_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &dbgu_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &dbgu_data,
|
|
},
|
|
.resource = dbgu_resources,
|
|
.num_resources = ARRAY_SIZE(dbgu_resources),
|
|
@@ -692,29 +951,36 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91rm9200_uart0_device = {
|
|
.name = "atmel_usart",
|
|
.id = 1,
|
|
.dev = {
|
|
- .platform_data = &uart0_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart0_data,
|
|
},
|
|
.resource = uart0_resources,
|
|
.num_resources = ARRAY_SIZE(uart0_resources),
|
|
};
|
|
|
|
-static inline void configure_usart0_pins(void)
|
|
+static inline void configure_usart0_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
|
|
- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
|
|
|
|
- /*
|
|
- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
|
|
- * We need to drive the pin manually. Default is off (RTS is active low).
|
|
- */
|
|
- at91_set_gpio_output(AT91_PIN_PA21, 1);
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS) {
|
|
+ /*
|
|
+ * AT91RM9200 Errata #39 - RTS0 is not internally connected
|
|
+ * to PA21, so we need to drive the pin manually.
|
|
+ * Default is off (RTS is active low).
|
|
+ */
|
|
+ at91_set_gpio_output(AT91_PIN_PA21, 1);
|
|
+ }
|
|
}
|
|
|
|
static struct resource uart1_resources[] = {
|
|
@@ -734,28 +1000,37 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91rm9200_uart1_device = {
|
|
.name = "atmel_usart",
|
|
.id = 2,
|
|
.dev = {
|
|
- .platform_data = &uart1_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart1_data,
|
|
},
|
|
.resource = uart1_resources,
|
|
.num_resources = ARRAY_SIZE(uart1_resources),
|
|
};
|
|
|
|
-static inline void configure_usart1_pins(void)
|
|
+static inline void configure_usart1_pins(unsigned pins)
|
|
{
|
|
- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
|
|
- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
|
|
at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
|
|
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
|
|
- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
|
|
- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
|
|
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RI)
|
|
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
|
|
+ if (pins & ATMEL_UART_DTR)
|
|
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
|
|
+ if (pins & ATMEL_UART_DCD)
|
|
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
|
|
+ if (pins & ATMEL_UART_DSR)
|
|
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
|
|
}
|
|
|
|
static struct resource uart2_resources[] = {
|
|
@@ -775,22 +1050,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91rm9200_uart2_device = {
|
|
.name = "atmel_usart",
|
|
.id = 3,
|
|
.dev = {
|
|
- .platform_data = &uart2_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart2_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart2_data,
|
|
},
|
|
.resource = uart2_resources,
|
|
.num_resources = ARRAY_SIZE(uart2_resources),
|
|
};
|
|
|
|
-static inline void configure_usart2_pins(void)
|
|
+static inline void configure_usart2_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
|
|
at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
|
|
+
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */
|
|
}
|
|
|
|
static struct resource uart3_resources[] = {
|
|
@@ -810,28 +1092,35 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91rm9200_uart3_device = {
|
|
.name = "atmel_usart",
|
|
.id = 4,
|
|
.dev = {
|
|
- .platform_data = &uart3_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart3_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart3_data,
|
|
},
|
|
.resource = uart3_resources,
|
|
.num_resources = ARRAY_SIZE(uart3_resources),
|
|
};
|
|
|
|
-static inline void configure_usart3_pins(void)
|
|
+static inline void configure_usart3_pins(unsigned pins)
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
|
|
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
|
|
+
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
|
|
}
|
|
|
|
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* UARTs to use */
|
|
struct platform_device *atmel_default_console_device; /* the serial console device */
|
|
|
|
-void __init at91_init_serial(struct at91_uart_config *config)
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
|
|
{
|
|
int i;
|
|
|
|
@@ -839,22 +1128,22 @@
|
|
for (i = 0; i < config->nr_tty; i++) {
|
|
switch (config->tty_map[i]) {
|
|
case 0:
|
|
- configure_usart0_pins();
|
|
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
at91_uarts[i] = &at91rm9200_uart0_device;
|
|
at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
|
|
break;
|
|
case 1:
|
|
- configure_usart1_pins();
|
|
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
|
|
at91_uarts[i] = &at91rm9200_uart1_device;
|
|
at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
|
|
break;
|
|
case 2:
|
|
- configure_usart2_pins();
|
|
+ configure_usart2_pins(0);
|
|
at91_uarts[i] = &at91rm9200_uart2_device;
|
|
at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
|
|
break;
|
|
case 3:
|
|
- configure_usart3_pins();
|
|
+ configure_usart3_pins(0);
|
|
at91_uarts[i] = &at91rm9200_uart3_device;
|
|
at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
|
|
break;
|
|
@@ -876,6 +1165,53 @@
|
|
printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
}
|
|
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0: /* DBGU */
|
|
+ pdev = &at91rm9200_dbgu_device;
|
|
+ configure_dbgu_pins();
|
|
+ at91_clock_associate("mck", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91RM9200_ID_US0:
|
|
+ pdev = &at91rm9200_uart0_device;
|
|
+ configure_usart0_pins(pins);
|
|
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91RM9200_ID_US1:
|
|
+ pdev = &at91rm9200_uart1_device;
|
|
+ configure_usart1_pins(pins);
|
|
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91RM9200_ID_US2:
|
|
+ pdev = &at91rm9200_uart2_device;
|
|
+ configure_usart2_pins(pins);
|
|
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91RM9200_ID_US3:
|
|
+ pdev = &at91rm9200_uart3_device;
|
|
+ configure_usart3_pins(pins);
|
|
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+ pdev->id = portnr; /* update to mapped ID */
|
|
+
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ at91_uarts[portnr] = pdev;
|
|
+}
|
|
+
|
|
+void __init at91_set_serial_console(unsigned portnr)
|
|
+{
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ atmel_default_console_device = at91_uarts[portnr];
|
|
+ if (!atmel_default_console_device)
|
|
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
+}
|
|
+
|
|
void __init at91_add_device_serial(void)
|
|
{
|
|
int i;
|
|
@@ -886,7 +1222,9 @@
|
|
}
|
|
}
|
|
#else
|
|
-void __init at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
|
|
+void __init at91_set_serial_console(unsigned portnr) {}
|
|
void __init at91_add_device_serial(void) {}
|
|
#endif
|
|
|
|
@@ -901,6 +1239,7 @@
|
|
{
|
|
at91_add_device_rtc();
|
|
at91_add_device_watchdog();
|
|
+ at91_add_device_tc();
|
|
return 0;
|
|
}
|
|
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200_time.c linux-2.6/arch/arm/mach-at91/at91rm9200_time.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91rm9200_time.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91rm9200_time.c 2007-12-31 15:04:28.000000000 +0200
|
|
@@ -136,8 +136,6 @@
|
|
u32 alm;
|
|
int status = 0;
|
|
|
|
- BUG_ON(delta < 2);
|
|
-
|
|
/* Use "raw" primitives so we behave correctly on RT kernels. */
|
|
raw_local_irq_save(flags);
|
|
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/arm/mach-at91/at91sam9260.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91sam9260.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91sam9260.c 2008-03-01 19:03:06.000000000 +0200
|
|
@@ -11,6 +11,7 @@
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
+#include <linux/pm.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
@@ -18,6 +19,7 @@
|
|
#include <asm/arch/at91sam9260.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
@@ -267,6 +269,11 @@
|
|
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
|
|
}
|
|
|
|
+static void at91sam9260_poweroff(void)
|
|
+{
|
|
+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
|
|
+}
|
|
+
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91SAM9260 processor initialization
|
|
@@ -304,6 +311,7 @@
|
|
iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
|
|
|
|
at91_arch_reset = at91sam9260_reset;
|
|
+ pm_power_off = at91sam9260_poweroff;
|
|
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
|
|
| (1 << AT91SAM9260_ID_IRQ2);
|
|
|
|
@@ -327,30 +335,30 @@
|
|
static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
7, /* Advanced Interrupt Controller */
|
|
7, /* System Peripherals */
|
|
- 0, /* Parallel IO Controller A */
|
|
- 0, /* Parallel IO Controller B */
|
|
- 0, /* Parallel IO Controller C */
|
|
+ 1, /* Parallel IO Controller A */
|
|
+ 1, /* Parallel IO Controller B */
|
|
+ 1, /* Parallel IO Controller C */
|
|
0, /* Analog-to-Digital Converter */
|
|
- 6, /* USART 0 */
|
|
- 6, /* USART 1 */
|
|
- 6, /* USART 2 */
|
|
+ 5, /* USART 0 */
|
|
+ 5, /* USART 1 */
|
|
+ 5, /* USART 2 */
|
|
0, /* Multimedia Card Interface */
|
|
- 4, /* USB Device Port */
|
|
- 0, /* Two-Wire Interface */
|
|
- 6, /* Serial Peripheral Interface 0 */
|
|
- 6, /* Serial Peripheral Interface 1 */
|
|
+ 2, /* USB Device Port */
|
|
+ 6, /* Two-Wire Interface */
|
|
+ 5, /* Serial Peripheral Interface 0 */
|
|
+ 5, /* Serial Peripheral Interface 1 */
|
|
5, /* Serial Synchronous Controller */
|
|
0,
|
|
0,
|
|
0, /* Timer Counter 0 */
|
|
0, /* Timer Counter 1 */
|
|
0, /* Timer Counter 2 */
|
|
- 3, /* USB Host port */
|
|
+ 2, /* USB Host port */
|
|
3, /* Ethernet */
|
|
0, /* Image Sensor Interface */
|
|
- 6, /* USART 3 */
|
|
- 6, /* USART 4 */
|
|
- 6, /* USART 5 */
|
|
+ 5, /* USART 3 */
|
|
+ 5, /* USART 4 */
|
|
+ 5, /* USART 5 */
|
|
0, /* Timer Counter 3 */
|
|
0, /* Timer Counter 4 */
|
|
0, /* Timer Counter 5 */
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91sam9260_devices.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c 2008-03-01 22:09:03.000000000 +0200
|
|
@@ -12,13 +12,14 @@
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c-gpio.h>
|
|
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/at91sam9260.h>
|
|
-#include <asm/arch/at91sam926x_mc.h>
|
|
+#include <asm/arch/at91sam926x_smc.h>
|
|
#include <asm/arch/at91sam9260_matrix.h>
|
|
|
|
#include "generic.h"
|
|
@@ -29,7 +30,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
-static u64 ohci_dmamask = 0xffffffffUL;
|
|
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_usbh_data usbh_data;
|
|
|
|
static struct resource usbh_resources[] = {
|
|
@@ -50,7 +51,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &ohci_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &usbh_data,
|
|
},
|
|
.resource = usbh_resources,
|
|
@@ -125,7 +126,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
|
|
-static u64 eth_dmamask = 0xffffffffUL;
|
|
+static u64 eth_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_eth_data eth_data;
|
|
|
|
static struct resource eth_resources[] = {
|
|
@@ -146,7 +147,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = ð_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = ð_data,
|
|
},
|
|
.resource = eth_resources,
|
|
@@ -199,7 +200,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
|
|
-static u64 mmc_dmamask = 0xffffffffUL;
|
|
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_mmc_data mmc_data;
|
|
|
|
static struct resource mmc_resources[] = {
|
|
@@ -220,7 +221,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc_data,
|
|
},
|
|
.resource = mmc_resources,
|
|
@@ -287,9 +288,14 @@
|
|
#define NAND_BASE AT91_CHIPSELECT_3
|
|
|
|
static struct resource nand_resources[] = {
|
|
- {
|
|
+ [0] = {
|
|
.start = NAND_BASE,
|
|
- .end = NAND_BASE + SZ_8M - 1,
|
|
+ .end = NAND_BASE + SZ_256M - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91_BASE_SYS + AT91_ECC,
|
|
+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
@@ -312,7 +318,7 @@
|
|
return;
|
|
|
|
csa = at91_sys_read(AT91_MATRIX_EBICSA);
|
|
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
|
|
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
|
|
|
|
/* set the bus interface characteristics */
|
|
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
|
|
@@ -431,7 +437,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
|
-static u64 spi_dmamask = 0xffffffffUL;
|
|
+static u64 spi_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource spi0_resources[] = {
|
|
[0] = {
|
|
@@ -451,7 +457,7 @@
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi0_resources,
|
|
.num_resources = ARRAY_SIZE(spi0_resources),
|
|
@@ -477,7 +483,7 @@
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi1_resources,
|
|
.num_resources = ARRAY_SIZE(spi1_resources),
|
|
@@ -539,24 +545,211 @@
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
- * LEDs
|
|
+ * Timer/Counter blocks
|
|
* -------------------------------------------------------------------- */
|
|
|
|
-#if defined(CONFIG_LEDS)
|
|
-u8 at91_leds_cpu;
|
|
-u8 at91_leds_timer;
|
|
+#ifdef CONFIG_ATMEL_TCLIB
|
|
+
|
|
+static struct resource tcb0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9260_BASE_TCB0,
|
|
+ .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9260_ID_TC0,
|
|
+ .end = AT91SAM9260_ID_TC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [2] = {
|
|
+ .start = AT91SAM9260_ID_TC1,
|
|
+ .end = AT91SAM9260_ID_TC1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [3] = {
|
|
+ .start = AT91SAM9260_ID_TC2,
|
|
+ .end = AT91SAM9260_ID_TC2,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9260_tcb0_device = {
|
|
+ .name = "atmel_tcb",
|
|
+ .id = 0,
|
|
+ .resource = tcb0_resources,
|
|
+ .num_resources = ARRAY_SIZE(tcb0_resources),
|
|
+};
|
|
+
|
|
+static struct resource tcb1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9260_BASE_TCB1,
|
|
+ .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9260_ID_TC3,
|
|
+ .end = AT91SAM9260_ID_TC3,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [2] = {
|
|
+ .start = AT91SAM9260_ID_TC4,
|
|
+ .end = AT91SAM9260_ID_TC4,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [3] = {
|
|
+ .start = AT91SAM9260_ID_TC5,
|
|
+ .end = AT91SAM9260_ID_TC5,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9260_tcb1_device = {
|
|
+ .name = "atmel_tcb",
|
|
+ .id = 1,
|
|
+ .resource = tcb1_resources,
|
|
+ .num_resources = ARRAY_SIZE(tcb1_resources),
|
|
+};
|
|
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
|
|
+static void __init at91_add_device_tc(void)
|
|
{
|
|
- /* Enable GPIO to access the LEDs */
|
|
- at91_set_gpio_output(cpu_led, 1);
|
|
- at91_set_gpio_output(timer_led, 1);
|
|
+ /* this chip has a separate clock and irq for each TC channel */
|
|
+ at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
|
|
+ at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
|
|
+ at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
|
|
+ platform_device_register(&at91sam9260_tcb0_device);
|
|
+
|
|
+ at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
|
|
+ at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
|
|
+ at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
|
|
+ platform_device_register(&at91sam9260_tcb1_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_tc(void) { }
|
|
+#endif
|
|
|
|
- at91_leds_cpu = cpu_led;
|
|
- at91_leds_timer = timer_led;
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * RTT
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static struct resource rtt_resources[] = {
|
|
+ {
|
|
+ .start = AT91_BASE_SYS + AT91_RTT,
|
|
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9260_rtt_device = {
|
|
+ .name = "at91_rtt",
|
|
+ .id = -1,
|
|
+ .resource = rtt_resources,
|
|
+ .num_resources = ARRAY_SIZE(rtt_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_rtt(void)
|
|
+{
|
|
+ device_init_wakeup(&at91sam9260_rtt_device.dev, 1);
|
|
+ platform_device_register(&at91sam9260_rtt_device);
|
|
+}
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Watchdog
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
|
|
+static struct platform_device at91sam9260_wdt_device = {
|
|
+ .name = "at91_wdt",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_watchdog(void)
|
|
+{
|
|
+ platform_device_register(&at91sam9260_wdt_device);
|
|
}
|
|
#else
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
|
|
+static void __init at91_add_device_watchdog(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * SSC -- Synchronous Serial Controller
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
|
|
+static u64 ssc_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9260_BASE_SSC,
|
|
+ .end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9260_ID_SSC,
|
|
+ .end = AT91SAM9260_ID_SSC,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9260_ssc_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_A_periph(AT91_PIN_PB17, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_A_periph(AT91_PIN_PB16, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_A_periph(AT91_PIN_PB18, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_A_periph(AT91_PIN_PB19, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_A_periph(AT91_PIN_PB20, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_A_periph(AT91_PIN_PB21, 1);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * SSC controllers are accessed through library code, instead of any
|
|
+ * kind of all-singing/all-dancing driver. For example one could be
|
|
+ * used by a particular I2S audio codec's driver, while another one
|
|
+ * on the same system might be used by a custom data capture driver.
|
|
+ */
|
|
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ /*
|
|
+ * NOTE: caller is responsible for passing information matching
|
|
+ * "pins" to whatever will be using each particular controller.
|
|
+ */
|
|
+ switch (id) {
|
|
+ case AT91SAM9260_ID_SSC:
|
|
+ pdev = &at91sam9260_ssc_device;
|
|
+ configure_ssc_pins(pins);
|
|
+ at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ platform_device_register(pdev);
|
|
+}
|
|
+
|
|
+#else
|
|
+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
|
|
#endif
|
|
|
|
|
|
@@ -582,13 +775,15 @@
|
|
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
|
|
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
|
|
};
|
|
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_dbgu_device = {
|
|
.name = "atmel_usart",
|
|
.id = 0,
|
|
.dev = {
|
|
- .platform_data = &dbgu_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &dbgu_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &dbgu_data,
|
|
},
|
|
.resource = dbgu_resources,
|
|
.num_resources = ARRAY_SIZE(dbgu_resources),
|
|
@@ -617,28 +812,37 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart0_device = {
|
|
.name = "atmel_usart",
|
|
.id = 1,
|
|
.dev = {
|
|
- .platform_data = &uart0_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart0_data,
|
|
},
|
|
.resource = uart0_resources,
|
|
.num_resources = ARRAY_SIZE(uart0_resources),
|
|
};
|
|
|
|
-static inline void configure_usart0_pins(void)
|
|
+static inline void configure_usart0_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
|
|
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
|
|
- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
|
|
- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
|
|
- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
|
|
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
|
|
- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
|
|
+ if (pins & ATMEL_UART_DTR)
|
|
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
|
|
+ if (pins & ATMEL_UART_DSR)
|
|
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
|
|
+ if (pins & ATMEL_UART_DCD)
|
|
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
|
|
+ if (pins & ATMEL_UART_RI)
|
|
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
|
|
}
|
|
|
|
static struct resource uart1_resources[] = {
|
|
@@ -658,24 +862,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart1_device = {
|
|
.name = "atmel_usart",
|
|
.id = 2,
|
|
.dev = {
|
|
- .platform_data = &uart1_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart1_data,
|
|
},
|
|
.resource = uart1_resources,
|
|
.num_resources = ARRAY_SIZE(uart1_resources),
|
|
};
|
|
|
|
-static inline void configure_usart1_pins(void)
|
|
+static inline void configure_usart1_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
|
|
- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
|
|
- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
|
|
}
|
|
|
|
static struct resource uart2_resources[] = {
|
|
@@ -695,22 +904,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart2_device = {
|
|
.name = "atmel_usart",
|
|
.id = 3,
|
|
.dev = {
|
|
- .platform_data = &uart2_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart2_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart2_data,
|
|
},
|
|
.resource = uart2_resources,
|
|
.num_resources = ARRAY_SIZE(uart2_resources),
|
|
};
|
|
|
|
-static inline void configure_usart2_pins(void)
|
|
+static inline void configure_usart2_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
|
|
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
|
|
}
|
|
|
|
static struct resource uart3_resources[] = {
|
|
@@ -730,22 +946,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart3_device = {
|
|
.name = "atmel_usart",
|
|
.id = 4,
|
|
.dev = {
|
|
- .platform_data = &uart3_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart3_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart3_data,
|
|
},
|
|
.resource = uart3_resources,
|
|
.num_resources = ARRAY_SIZE(uart3_resources),
|
|
};
|
|
|
|
-static inline void configure_usart3_pins(void)
|
|
+static inline void configure_usart3_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
|
|
at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
|
|
}
|
|
|
|
static struct resource uart4_resources[] = {
|
|
@@ -765,13 +988,15 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart4_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart4_device = {
|
|
.name = "atmel_usart",
|
|
.id = 5,
|
|
.dev = {
|
|
- .platform_data = &uart4_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart4_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart4_data,
|
|
},
|
|
.resource = uart4_resources,
|
|
.num_resources = ARRAY_SIZE(uart4_resources),
|
|
@@ -800,13 +1025,15 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart5_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9260_uart5_device = {
|
|
.name = "atmel_usart",
|
|
.id = 6,
|
|
.dev = {
|
|
- .platform_data = &uart5_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart5_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart5_data,
|
|
},
|
|
.resource = uart5_resources,
|
|
.num_resources = ARRAY_SIZE(uart5_resources),
|
|
@@ -818,10 +1045,10 @@
|
|
at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
|
|
}
|
|
|
|
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
struct platform_device *atmel_default_console_device; /* the serial console device */
|
|
|
|
-void __init at91_init_serial(struct at91_uart_config *config)
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
|
|
{
|
|
int i;
|
|
|
|
@@ -829,22 +1056,22 @@
|
|
for (i = 0; i < config->nr_tty; i++) {
|
|
switch (config->tty_map[i]) {
|
|
case 0:
|
|
- configure_usart0_pins();
|
|
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
|
|
at91_uarts[i] = &at91sam9260_uart0_device;
|
|
at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
|
|
break;
|
|
case 1:
|
|
- configure_usart1_pins();
|
|
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
at91_uarts[i] = &at91sam9260_uart1_device;
|
|
at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
|
|
break;
|
|
case 2:
|
|
- configure_usart2_pins();
|
|
+ configure_usart2_pins(0);
|
|
at91_uarts[i] = &at91sam9260_uart2_device;
|
|
at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
|
|
break;
|
|
case 3:
|
|
- configure_usart3_pins();
|
|
+ configure_usart3_pins(0);
|
|
at91_uarts[i] = &at91sam9260_uart3_device;
|
|
at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
|
|
break;
|
|
@@ -876,6 +1103,63 @@
|
|
printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
}
|
|
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0: /* DBGU */
|
|
+ pdev = &at91sam9260_dbgu_device;
|
|
+ configure_dbgu_pins();
|
|
+ at91_clock_associate("mck", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9260_ID_US0:
|
|
+ pdev = &at91sam9260_uart0_device;
|
|
+ configure_usart0_pins(pins);
|
|
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9260_ID_US1:
|
|
+ pdev = &at91sam9260_uart1_device;
|
|
+ configure_usart1_pins(pins);
|
|
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9260_ID_US2:
|
|
+ pdev = &at91sam9260_uart2_device;
|
|
+ configure_usart2_pins(pins);
|
|
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9260_ID_US3:
|
|
+ pdev = &at91sam9260_uart3_device;
|
|
+ configure_usart3_pins(pins);
|
|
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9260_ID_US4:
|
|
+ pdev = &at91sam9260_uart4_device;
|
|
+ configure_usart4_pins();
|
|
+ at91_clock_associate("usart4_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9260_ID_US5:
|
|
+ pdev = &at91sam9260_uart5_device;
|
|
+ configure_usart5_pins();
|
|
+ at91_clock_associate("usart5_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+ pdev->id = portnr; /* update to mapped ID */
|
|
+
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ at91_uarts[portnr] = pdev;
|
|
+}
|
|
+
|
|
+void __init at91_set_serial_console(unsigned portnr)
|
|
+{
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ atmel_default_console_device = at91_uarts[portnr];
|
|
+ if (!atmel_default_console_device)
|
|
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
+}
|
|
+
|
|
void __init at91_add_device_serial(void)
|
|
{
|
|
int i;
|
|
@@ -886,7 +1170,9 @@
|
|
}
|
|
}
|
|
#else
|
|
-void __init at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
|
|
+void __init at91_set_serial_console(unsigned portnr) {}
|
|
void __init at91_add_device_serial(void) {}
|
|
#endif
|
|
|
|
@@ -898,6 +1184,9 @@
|
|
*/
|
|
static int __init at91_add_standard_devices(void)
|
|
{
|
|
+ at91_add_device_rtt();
|
|
+ at91_add_device_watchdog();
|
|
+ at91_add_device_tc();
|
|
return 0;
|
|
}
|
|
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/arm/mach-at91/at91sam9261.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91sam9261.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91sam9261.c 2008-03-01 19:03:29.000000000 +0200
|
|
@@ -11,12 +11,14 @@
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
+#include <linux/pm.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/arch/at91sam9261.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
@@ -245,6 +247,11 @@
|
|
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
|
|
}
|
|
|
|
+static void at91sam9261_poweroff(void)
|
|
+{
|
|
+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
|
|
+}
|
|
+
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91SAM9261 processor initialization
|
|
@@ -256,6 +263,7 @@
|
|
iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
|
|
|
|
at91_arch_reset = at91sam9261_reset;
|
|
+ pm_power_off = at91sam9261_poweroff;
|
|
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
|
|
| (1 << AT91SAM9261_ID_IRQ2);
|
|
|
|
@@ -279,25 +287,25 @@
|
|
static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
7, /* Advanced Interrupt Controller */
|
|
7, /* System Peripherals */
|
|
- 0, /* Parallel IO Controller A */
|
|
- 0, /* Parallel IO Controller B */
|
|
- 0, /* Parallel IO Controller C */
|
|
+ 1, /* Parallel IO Controller A */
|
|
+ 1, /* Parallel IO Controller B */
|
|
+ 1, /* Parallel IO Controller C */
|
|
0,
|
|
- 6, /* USART 0 */
|
|
- 6, /* USART 1 */
|
|
- 6, /* USART 2 */
|
|
+ 5, /* USART 0 */
|
|
+ 5, /* USART 1 */
|
|
+ 5, /* USART 2 */
|
|
0, /* Multimedia Card Interface */
|
|
- 4, /* USB Device Port */
|
|
- 0, /* Two-Wire Interface */
|
|
- 6, /* Serial Peripheral Interface 0 */
|
|
- 6, /* Serial Peripheral Interface 1 */
|
|
- 5, /* Serial Synchronous Controller 0 */
|
|
- 5, /* Serial Synchronous Controller 1 */
|
|
- 5, /* Serial Synchronous Controller 2 */
|
|
+ 2, /* USB Device Port */
|
|
+ 6, /* Two-Wire Interface */
|
|
+ 5, /* Serial Peripheral Interface 0 */
|
|
+ 5, /* Serial Peripheral Interface 1 */
|
|
+ 4, /* Serial Synchronous Controller 0 */
|
|
+ 4, /* Serial Synchronous Controller 1 */
|
|
+ 4, /* Serial Synchronous Controller 2 */
|
|
0, /* Timer Counter 0 */
|
|
0, /* Timer Counter 1 */
|
|
0, /* Timer Counter 2 */
|
|
- 3, /* USB Host port */
|
|
+ 2, /* USB Host port */
|
|
3, /* LCD Controller */
|
|
0,
|
|
0,
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c 2008-03-01 22:09:18.000000000 +0200
|
|
@@ -13,6 +13,7 @@
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c-gpio.h>
|
|
|
|
@@ -23,7 +24,7 @@
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/at91sam9261.h>
|
|
#include <asm/arch/at91sam9261_matrix.h>
|
|
-#include <asm/arch/at91sam926x_mc.h>
|
|
+#include <asm/arch/at91sam926x_smc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
@@ -33,7 +34,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
-static u64 ohci_dmamask = 0xffffffffUL;
|
|
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_usbh_data usbh_data;
|
|
|
|
static struct resource usbh_resources[] = {
|
|
@@ -54,7 +55,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &ohci_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &usbh_data,
|
|
},
|
|
.resource = usbh_resources,
|
|
@@ -106,8 +107,6 @@
|
|
|
|
void __init at91_add_device_udc(struct at91_udc_data *data)
|
|
{
|
|
- unsigned long x;
|
|
-
|
|
if (!data)
|
|
return;
|
|
|
|
@@ -116,9 +115,7 @@
|
|
at91_set_deglitch(data->vbus_pin, 1);
|
|
}
|
|
|
|
- /* Pullup pin is handled internally */
|
|
- x = at91_sys_read(AT91_MATRIX_USBPUCR);
|
|
- at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
|
|
+ /* Pullup pin is handled internally by USB device peripheral */
|
|
|
|
udc_data = *data;
|
|
platform_device_register(&at91sam9261_udc_device);
|
|
@@ -132,7 +129,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
|
|
-static u64 mmc_dmamask = 0xffffffffUL;
|
|
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_mmc_data mmc_data;
|
|
|
|
static struct resource mmc_resources[] = {
|
|
@@ -153,7 +150,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc_data,
|
|
},
|
|
.resource = mmc_resources,
|
|
@@ -232,7 +229,7 @@
|
|
return;
|
|
|
|
csa = at91_sys_read(AT91_MATRIX_EBICSA);
|
|
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
|
|
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
|
|
|
|
/* set the bus interface characteristics */
|
|
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
|
|
@@ -354,7 +351,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
|
-static u64 spi_dmamask = 0xffffffffUL;
|
|
+static u64 spi_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource spi0_resources[] = {
|
|
[0] = {
|
|
@@ -374,7 +371,7 @@
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi0_resources,
|
|
.num_resources = ARRAY_SIZE(spi0_resources),
|
|
@@ -400,7 +397,7 @@
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi1_resources,
|
|
.num_resources = ARRAY_SIZE(spi1_resources),
|
|
@@ -466,7 +463,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
|
|
-static u64 lcdc_dmamask = 0xffffffffUL;
|
|
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
|
|
static struct atmel_lcdfb_info lcdc_data;
|
|
|
|
static struct resource lcdc_resources[] = {
|
|
@@ -494,7 +491,7 @@
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &lcdc_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &lcdc_data,
|
|
},
|
|
.resource = lcdc_resources,
|
|
@@ -507,6 +504,17 @@
|
|
return;
|
|
}
|
|
|
|
+#if defined(CONFIG_FB_ATMEL_STN)
|
|
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
|
|
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
|
|
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
|
|
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
|
|
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
|
|
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */
|
|
+ at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */
|
|
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
|
|
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
|
|
+#else
|
|
at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
|
|
at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
|
|
at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
|
|
@@ -529,6 +537,7 @@
|
|
at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
|
|
at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
|
|
at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
|
|
+#endif
|
|
|
|
lcdc_data = *data;
|
|
platform_device_register(&at91_lcdc_device);
|
|
@@ -539,24 +548,270 @@
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
- * LEDs
|
|
+ * Timer/Counter block
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#ifdef CONFIG_ATMEL_TCLIB
|
|
+
|
|
+static struct resource tcb_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9261_BASE_TCB0,
|
|
+ .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9261_ID_TC0,
|
|
+ .end = AT91SAM9261_ID_TC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [2] = {
|
|
+ .start = AT91SAM9261_ID_TC1,
|
|
+ .end = AT91SAM9261_ID_TC1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [3] = {
|
|
+ .start = AT91SAM9261_ID_TC2,
|
|
+ .end = AT91SAM9261_ID_TC2,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9261_tcb_device = {
|
|
+ .name = "atmel_tcb",
|
|
+ .id = 0,
|
|
+ .resource = tcb_resources,
|
|
+ .num_resources = ARRAY_SIZE(tcb_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_tc(void)
|
|
+{
|
|
+ /* this chip has a separate clock and irq for each TC channel */
|
|
+ at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
|
|
+ at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
|
|
+ at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
|
|
+ platform_device_register(&at91sam9261_tcb_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_tc(void) { }
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * RTT
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static struct resource rtt_resources[] = {
|
|
+ {
|
|
+ .start = AT91_BASE_SYS + AT91_RTT,
|
|
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9261_rtt_device = {
|
|
+ .name = "at91_rtt",
|
|
+ .id = -1,
|
|
+ .resource = rtt_resources,
|
|
+ .num_resources = ARRAY_SIZE(rtt_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_rtt(void)
|
|
+{
|
|
+ device_init_wakeup(&at91sam9261_rtt_device.dev, 1);
|
|
+ platform_device_register(&at91sam9261_rtt_device);
|
|
+}
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Watchdog
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
|
|
+static struct platform_device at91sam9261_wdt_device = {
|
|
+ .name = "at91_wdt",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_watchdog(void)
|
|
+{
|
|
+ platform_device_register(&at91sam9261_wdt_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_watchdog(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * SSC -- Synchronous Serial Controller
|
|
* -------------------------------------------------------------------- */
|
|
|
|
-#if defined(CONFIG_LEDS)
|
|
-u8 at91_leds_cpu;
|
|
-u8 at91_leds_timer;
|
|
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
|
|
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9261_BASE_SSC0,
|
|
+ .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9261_ID_SSC0,
|
|
+ .end = AT91SAM9261_ID_SSC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9261_ssc0_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc0_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc0_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc0_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_A_periph(AT91_PIN_PB21, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_A_periph(AT91_PIN_PB22, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_A_periph(AT91_PIN_PB23, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_A_periph(AT91_PIN_PB24, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_A_periph(AT91_PIN_PB25, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_A_periph(AT91_PIN_PB26, 1);
|
|
+}
|
|
+
|
|
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9261_BASE_SSC1,
|
|
+ .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9261_ID_SSC1,
|
|
+ .end = AT91SAM9261_ID_SSC1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9261_ssc1_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc1_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc1_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc1_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_B_periph(AT91_PIN_PA17, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_B_periph(AT91_PIN_PA18, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_B_periph(AT91_PIN_PA19, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_B_periph(AT91_PIN_PA20, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_B_periph(AT91_PIN_PA21, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_B_periph(AT91_PIN_PA22, 1);
|
|
+}
|
|
+
|
|
+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc2_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9261_BASE_SSC2,
|
|
+ .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9261_ID_SSC2,
|
|
+ .end = AT91SAM9261_ID_SSC2,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9261_ssc2_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 2,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc2_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc2_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc2_resources),
|
|
+};
|
|
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
|
|
+static inline void configure_ssc2_pins(unsigned pins)
|
|
{
|
|
- /* Enable GPIO to access the LEDs */
|
|
- at91_set_gpio_output(cpu_led, 1);
|
|
- at91_set_gpio_output(timer_led, 1);
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_B_periph(AT91_PIN_PC25, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_B_periph(AT91_PIN_PC26, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_B_periph(AT91_PIN_PC27, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_B_periph(AT91_PIN_PC28, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_B_periph(AT91_PIN_PC29, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_B_periph(AT91_PIN_PC30, 1);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * SSC controllers are accessed through library code, instead of any
|
|
+ * kind of all-singing/all-dancing driver. For example one could be
|
|
+ * used by a particular I2S audio codec's driver, while another one
|
|
+ * on the same system might be used by a custom data capture driver.
|
|
+ */
|
|
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ /*
|
|
+ * NOTE: caller is responsible for passing information matching
|
|
+ * "pins" to whatever will be using each particular controller.
|
|
+ */
|
|
+ switch (id) {
|
|
+ case AT91SAM9261_ID_SSC0:
|
|
+ pdev = &at91sam9261_ssc0_device;
|
|
+ configure_ssc0_pins(pins);
|
|
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
|
|
+ break;
|
|
+ case AT91SAM9261_ID_SSC1:
|
|
+ pdev = &at91sam9261_ssc1_device;
|
|
+ configure_ssc1_pins(pins);
|
|
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
|
|
+ break;
|
|
+ case AT91SAM9261_ID_SSC2:
|
|
+ pdev = &at91sam9261_ssc2_device;
|
|
+ configure_ssc2_pins(pins);
|
|
+ at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
|
|
- at91_leds_cpu = cpu_led;
|
|
- at91_leds_timer = timer_led;
|
|
+ platform_device_register(pdev);
|
|
}
|
|
+
|
|
#else
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
|
|
+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
|
|
#endif
|
|
|
|
|
|
@@ -583,13 +838,15 @@
|
|
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
|
|
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
|
|
};
|
|
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9261_dbgu_device = {
|
|
.name = "atmel_usart",
|
|
.id = 0,
|
|
.dev = {
|
|
- .platform_data = &dbgu_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &dbgu_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &dbgu_data,
|
|
},
|
|
.resource = dbgu_resources,
|
|
.num_resources = ARRAY_SIZE(dbgu_resources),
|
|
@@ -618,24 +875,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9261_uart0_device = {
|
|
.name = "atmel_usart",
|
|
.id = 1,
|
|
.dev = {
|
|
- .platform_data = &uart0_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart0_data,
|
|
},
|
|
.resource = uart0_resources,
|
|
.num_resources = ARRAY_SIZE(uart0_resources),
|
|
};
|
|
|
|
-static inline void configure_usart0_pins(void)
|
|
+static inline void configure_usart0_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
|
|
- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
|
|
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
|
|
}
|
|
|
|
static struct resource uart1_resources[] = {
|
|
@@ -655,22 +917,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9261_uart1_device = {
|
|
.name = "atmel_usart",
|
|
.id = 2,
|
|
.dev = {
|
|
- .platform_data = &uart1_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart1_data,
|
|
},
|
|
.resource = uart1_resources,
|
|
.num_resources = ARRAY_SIZE(uart1_resources),
|
|
};
|
|
|
|
-static inline void configure_usart1_pins(void)
|
|
+static inline void configure_usart1_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */
|
|
}
|
|
|
|
static struct resource uart2_resources[] = {
|
|
@@ -690,28 +959,35 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9261_uart2_device = {
|
|
.name = "atmel_usart",
|
|
.id = 3,
|
|
.dev = {
|
|
- .platform_data = &uart2_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart2_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart2_data,
|
|
},
|
|
.resource = uart2_resources,
|
|
.num_resources = ARRAY_SIZE(uart2_resources),
|
|
};
|
|
|
|
-static inline void configure_usart2_pins(void)
|
|
+static inline void configure_usart2_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
|
|
at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
|
|
}
|
|
|
|
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
struct platform_device *atmel_default_console_device; /* the serial console device */
|
|
|
|
-void __init at91_init_serial(struct at91_uart_config *config)
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
|
|
{
|
|
int i;
|
|
|
|
@@ -719,17 +995,17 @@
|
|
for (i = 0; i < config->nr_tty; i++) {
|
|
switch (config->tty_map[i]) {
|
|
case 0:
|
|
- configure_usart0_pins();
|
|
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
at91_uarts[i] = &at91sam9261_uart0_device;
|
|
at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
|
|
break;
|
|
case 1:
|
|
- configure_usart1_pins();
|
|
+ configure_usart1_pins(0);
|
|
at91_uarts[i] = &at91sam9261_uart1_device;
|
|
at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
|
|
break;
|
|
case 2:
|
|
- configure_usart2_pins();
|
|
+ configure_usart2_pins(0);
|
|
at91_uarts[i] = &at91sam9261_uart2_device;
|
|
at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
|
|
break;
|
|
@@ -751,6 +1027,48 @@
|
|
printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
}
|
|
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0: /* DBGU */
|
|
+ pdev = &at91sam9261_dbgu_device;
|
|
+ configure_dbgu_pins();
|
|
+ at91_clock_associate("mck", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9261_ID_US0:
|
|
+ pdev = &at91sam9261_uart0_device;
|
|
+ configure_usart0_pins(pins);
|
|
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9261_ID_US1:
|
|
+ pdev = &at91sam9261_uart1_device;
|
|
+ configure_usart1_pins(pins);
|
|
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9261_ID_US2:
|
|
+ pdev = &at91sam9261_uart2_device;
|
|
+ configure_usart2_pins(pins);
|
|
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+ pdev->id = portnr; /* update to mapped ID */
|
|
+
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ at91_uarts[portnr] = pdev;
|
|
+}
|
|
+
|
|
+void __init at91_set_serial_console(unsigned portnr)
|
|
+{
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ atmel_default_console_device = at91_uarts[portnr];
|
|
+ if (!atmel_default_console_device)
|
|
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
+}
|
|
+
|
|
void __init at91_add_device_serial(void)
|
|
{
|
|
int i;
|
|
@@ -761,7 +1079,9 @@
|
|
}
|
|
}
|
|
#else
|
|
-void __init at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
|
|
+void __init at91_set_serial_console(unsigned portnr) {}
|
|
void __init at91_add_device_serial(void) {}
|
|
#endif
|
|
|
|
@@ -774,6 +1094,9 @@
|
|
*/
|
|
static int __init at91_add_standard_devices(void)
|
|
{
|
|
+ at91_add_device_rtt();
|
|
+ at91_add_device_watchdog();
|
|
+ at91_add_device_tc();
|
|
return 0;
|
|
}
|
|
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/arm/mach-at91/at91sam9263.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91sam9263.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91sam9263.c 2008-03-01 19:03:55.000000000 +0200
|
|
@@ -11,12 +11,14 @@
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
+#include <linux/pm.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/arch/at91sam9263.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
@@ -271,6 +273,11 @@
|
|
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
|
|
}
|
|
|
|
+static void at91sam9263_poweroff(void)
|
|
+{
|
|
+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
|
|
+}
|
|
+
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91SAM9263 processor initialization
|
|
@@ -282,6 +289,7 @@
|
|
iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
|
|
|
|
at91_arch_reset = at91sam9263_reset;
|
|
+ pm_power_off = at91sam9263_poweroff;
|
|
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
|
|
|
|
/* Init clock subsystem */
|
|
@@ -304,34 +312,34 @@
|
|
static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
|
7, /* Advanced Interrupt Controller (FIQ) */
|
|
7, /* System Peripherals */
|
|
- 0, /* Parallel IO Controller A */
|
|
- 0, /* Parallel IO Controller B */
|
|
- 0, /* Parallel IO Controller C, D and E */
|
|
+ 1, /* Parallel IO Controller A */
|
|
+ 1, /* Parallel IO Controller B */
|
|
+ 1, /* Parallel IO Controller C, D and E */
|
|
0,
|
|
0,
|
|
- 6, /* USART 0 */
|
|
- 6, /* USART 1 */
|
|
- 6, /* USART 2 */
|
|
+ 5, /* USART 0 */
|
|
+ 5, /* USART 1 */
|
|
+ 5, /* USART 2 */
|
|
0, /* Multimedia Card Interface 0 */
|
|
0, /* Multimedia Card Interface 1 */
|
|
- 4, /* CAN */
|
|
- 0, /* Two-Wire Interface */
|
|
- 6, /* Serial Peripheral Interface 0 */
|
|
- 6, /* Serial Peripheral Interface 1 */
|
|
- 5, /* Serial Synchronous Controller 0 */
|
|
- 5, /* Serial Synchronous Controller 1 */
|
|
- 6, /* AC97 Controller */
|
|
+ 3, /* CAN */
|
|
+ 6, /* Two-Wire Interface */
|
|
+ 5, /* Serial Peripheral Interface 0 */
|
|
+ 5, /* Serial Peripheral Interface 1 */
|
|
+ 4, /* Serial Synchronous Controller 0 */
|
|
+ 4, /* Serial Synchronous Controller 1 */
|
|
+ 5, /* AC97 Controller */
|
|
0, /* Timer Counter 0, 1 and 2 */
|
|
0, /* Pulse Width Modulation Controller */
|
|
3, /* Ethernet */
|
|
0,
|
|
0, /* 2D Graphic Engine */
|
|
- 3, /* USB Device Port */
|
|
+ 2, /* USB Device Port */
|
|
0, /* Image Sensor Interface */
|
|
3, /* LDC Controller */
|
|
0, /* DMA Controller */
|
|
0,
|
|
- 3, /* USB Host port */
|
|
+ 2, /* USB Host port */
|
|
0, /* Advanced Interrupt Controller (IRQ0) */
|
|
0, /* Advanced Interrupt Controller (IRQ1) */
|
|
};
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91sam9263_devices.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c 2008-03-01 22:09:36.000000000 +0200
|
|
@@ -12,6 +12,7 @@
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c-gpio.h>
|
|
|
|
@@ -21,7 +22,7 @@
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/at91sam9263.h>
|
|
-#include <asm/arch/at91sam926x_mc.h>
|
|
+#include <asm/arch/at91sam926x_smc.h>
|
|
#include <asm/arch/at91sam9263_matrix.h>
|
|
|
|
#include "generic.h"
|
|
@@ -32,7 +33,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
-static u64 ohci_dmamask = 0xffffffffUL;
|
|
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_usbh_data usbh_data;
|
|
|
|
static struct resource usbh_resources[] = {
|
|
@@ -53,7 +54,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &ohci_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &usbh_data,
|
|
},
|
|
.resource = usbh_resources,
|
|
@@ -136,7 +137,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
|
|
-static u64 eth_dmamask = 0xffffffffUL;
|
|
+static u64 eth_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_eth_data eth_data;
|
|
|
|
static struct resource eth_resources[] = {
|
|
@@ -157,7 +158,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = ð_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = ð_data,
|
|
},
|
|
.resource = eth_resources,
|
|
@@ -210,7 +211,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
|
|
-static u64 mmc_dmamask = 0xffffffffUL;
|
|
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_mmc_data mmc0_data, mmc1_data;
|
|
|
|
static struct resource mmc0_resources[] = {
|
|
@@ -231,7 +232,7 @@
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc0_data,
|
|
},
|
|
.resource = mmc0_resources,
|
|
@@ -256,7 +257,7 @@
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc1_data,
|
|
},
|
|
.resource = mmc1_resources,
|
|
@@ -357,10 +358,15 @@
|
|
#define NAND_BASE AT91_CHIPSELECT_3
|
|
|
|
static struct resource nand_resources[] = {
|
|
- {
|
|
+ [0] = {
|
|
.start = NAND_BASE,
|
|
.end = NAND_BASE + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91_BASE_SYS + AT91_ECC0,
|
|
+ .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
@@ -382,7 +388,7 @@
|
|
return;
|
|
|
|
csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
|
|
- at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
|
|
+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
|
|
|
|
/* set the bus interface characteristics */
|
|
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
|
|
@@ -500,7 +506,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
|
-static u64 spi_dmamask = 0xffffffffUL;
|
|
+static u64 spi_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource spi0_resources[] = {
|
|
[0] = {
|
|
@@ -520,7 +526,7 @@
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi0_resources,
|
|
.num_resources = ARRAY_SIZE(spi0_resources),
|
|
@@ -546,7 +552,7 @@
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi1_resources,
|
|
.num_resources = ARRAY_SIZE(spi1_resources),
|
|
@@ -612,7 +618,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
|
|
-static u64 ac97_dmamask = 0xffffffffUL;
|
|
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
|
|
static struct atmel_ac97_data ac97_data;
|
|
|
|
static struct resource ac97_resources[] = {
|
|
@@ -633,7 +639,7 @@
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &ac97_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &ac97_data,
|
|
},
|
|
.resource = ac97_resources,
|
|
@@ -663,11 +669,61 @@
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
+ * Image Sensor Interface
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
|
|
+
|
|
+struct resource isi_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9263_BASE_ISI,
|
|
+ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9263_ID_ISI,
|
|
+ .end = AT91SAM9263_ID_ISI,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9263_isi_device = {
|
|
+ .name = "at91_isi",
|
|
+ .id = -1,
|
|
+ .resource = isi_resources,
|
|
+ .num_resources = ARRAY_SIZE(isi_resources),
|
|
+};
|
|
+
|
|
+void __init at91_add_device_isi(void)
|
|
+{
|
|
+ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
|
|
+ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
|
|
+ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
|
|
+ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
|
|
+ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
|
|
+ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
|
|
+ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
|
|
+ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
|
|
+ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
|
|
+ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
|
|
+ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
|
|
+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
|
|
+ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
|
|
+ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
|
|
+ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
|
|
+ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
|
|
+}
|
|
+#else
|
|
+void __init at91_add_device_isi(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
* LCD Controller
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
|
|
-static u64 lcdc_dmamask = 0xffffffffUL;
|
|
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
|
|
static struct atmel_lcdfb_info lcdc_data;
|
|
|
|
static struct resource lcdc_resources[] = {
|
|
@@ -688,7 +744,7 @@
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &lcdc_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &lcdc_data,
|
|
},
|
|
.resource = lcdc_resources,
|
|
@@ -732,24 +788,227 @@
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
- * LEDs
|
|
+ * Timer/Counter block
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#ifdef CONFIG_ATMEL_TCLIB
|
|
+
|
|
+static struct resource tcb_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9263_BASE_TCB0,
|
|
+ .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9263_ID_TCB,
|
|
+ .end = AT91SAM9263_ID_TCB,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9263_tcb_device = {
|
|
+ .name = "atmel_tcb",
|
|
+ .id = 0,
|
|
+ .resource = tcb_resources,
|
|
+ .num_resources = ARRAY_SIZE(tcb_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_tc(void)
|
|
+{
|
|
+ /* this chip has one clock and irq for all three TC channels */
|
|
+ at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
|
|
+ platform_device_register(&at91sam9263_tcb_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_tc(void) { }
|
|
+#endif
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * RTT
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static struct resource rtt0_resources[] = {
|
|
+ {
|
|
+ .start = AT91_BASE_SYS + AT91_RTT0,
|
|
+ .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9263_rtt0_device = {
|
|
+ .name = "at91_rtt",
|
|
+ .id = 0,
|
|
+ .resource = rtt0_resources,
|
|
+ .num_resources = ARRAY_SIZE(rtt0_resources),
|
|
+};
|
|
+
|
|
+static struct resource rtt1_resources[] = {
|
|
+ {
|
|
+ .start = AT91_BASE_SYS + AT91_RTT1,
|
|
+ .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9263_rtt1_device = {
|
|
+ .name = "at91_rtt",
|
|
+ .id = 1,
|
|
+ .resource = rtt1_resources,
|
|
+ .num_resources = ARRAY_SIZE(rtt1_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_rtt(void)
|
|
+{
|
|
+ device_init_wakeup(&at91sam9263_rtt0_device.dev, 1);
|
|
+ platform_device_register(&at91sam9263_rtt0_device);
|
|
+ device_init_wakeup(&at91sam9263_rtt1_device.dev, 1);
|
|
+ platform_device_register(&at91sam9263_rtt1_device);
|
|
+}
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Watchdog
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
|
|
+static struct platform_device at91sam9263_wdt_device = {
|
|
+ .name = "at91_wdt",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_watchdog(void)
|
|
+{
|
|
+ platform_device_register(&at91sam9263_wdt_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_watchdog(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * SSC -- Synchronous Serial Controller
|
|
* -------------------------------------------------------------------- */
|
|
|
|
-#if defined(CONFIG_LEDS)
|
|
-u8 at91_leds_cpu;
|
|
-u8 at91_leds_timer;
|
|
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
|
|
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
|
|
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
|
|
+static struct resource ssc0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9263_BASE_SSC0,
|
|
+ .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9263_ID_SSC0,
|
|
+ .end = AT91SAM9263_ID_SSC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9263_ssc0_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc0_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc0_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc0_pins(unsigned pins)
|
|
{
|
|
- /* Enable GPIO to access the LEDs */
|
|
- at91_set_gpio_output(cpu_led, 1);
|
|
- at91_set_gpio_output(timer_led, 1);
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_B_periph(AT91_PIN_PB0, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_B_periph(AT91_PIN_PB1, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_B_periph(AT91_PIN_PB2, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_B_periph(AT91_PIN_PB3, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_B_periph(AT91_PIN_PB4, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_B_periph(AT91_PIN_PB5, 1);
|
|
+}
|
|
+
|
|
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
|
|
|
|
- at91_leds_cpu = cpu_led;
|
|
- at91_leds_timer = timer_led;
|
|
+static struct resource ssc1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9263_BASE_SSC1,
|
|
+ .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9263_ID_SSC1,
|
|
+ .end = AT91SAM9263_ID_SSC1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9263_ssc1_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc1_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc1_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc1_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_A_periph(AT91_PIN_PB6, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_A_periph(AT91_PIN_PB7, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_A_periph(AT91_PIN_PB8, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_A_periph(AT91_PIN_PB9, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_A_periph(AT91_PIN_PB10, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_A_periph(AT91_PIN_PB11, 1);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * SSC controllers are accessed through library code, instead of any
|
|
+ * kind of all-singing/all-dancing driver. For example one could be
|
|
+ * used by a particular I2S audio codec's driver, while another one
|
|
+ * on the same system might be used by a custom data capture driver.
|
|
+ */
|
|
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ /*
|
|
+ * NOTE: caller is responsible for passing information matching
|
|
+ * "pins" to whatever will be using each particular controller.
|
|
+ */
|
|
+ switch (id) {
|
|
+ case AT91SAM9263_ID_SSC0:
|
|
+ pdev = &at91sam9263_ssc0_device;
|
|
+ configure_ssc0_pins(pins);
|
|
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
|
|
+ break;
|
|
+ case AT91SAM9263_ID_SSC1:
|
|
+ pdev = &at91sam9263_ssc1_device;
|
|
+ configure_ssc1_pins(pins);
|
|
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ platform_device_register(pdev);
|
|
}
|
|
+
|
|
#else
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
|
|
+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
|
|
#endif
|
|
|
|
|
|
@@ -777,13 +1036,15 @@
|
|
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
|
|
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
|
|
};
|
|
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9263_dbgu_device = {
|
|
.name = "atmel_usart",
|
|
.id = 0,
|
|
.dev = {
|
|
- .platform_data = &dbgu_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &dbgu_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &dbgu_data,
|
|
},
|
|
.resource = dbgu_resources,
|
|
.num_resources = ARRAY_SIZE(dbgu_resources),
|
|
@@ -812,24 +1073,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9263_uart0_device = {
|
|
.name = "atmel_usart",
|
|
.id = 1,
|
|
.dev = {
|
|
- .platform_data = &uart0_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart0_data,
|
|
},
|
|
.resource = uart0_resources,
|
|
.num_resources = ARRAY_SIZE(uart0_resources),
|
|
};
|
|
|
|
-static inline void configure_usart0_pins(void)
|
|
+static inline void configure_usart0_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
|
|
- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
|
|
- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
|
|
}
|
|
|
|
static struct resource uart1_resources[] = {
|
|
@@ -849,24 +1115,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9263_uart1_device = {
|
|
.name = "atmel_usart",
|
|
.id = 2,
|
|
.dev = {
|
|
- .platform_data = &uart1_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart1_data,
|
|
},
|
|
.resource = uart1_resources,
|
|
.num_resources = ARRAY_SIZE(uart1_resources),
|
|
};
|
|
|
|
-static inline void configure_usart1_pins(void)
|
|
+static inline void configure_usart1_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
|
|
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
|
|
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
|
|
}
|
|
|
|
static struct resource uart2_resources[] = {
|
|
@@ -886,30 +1157,35 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9263_uart2_device = {
|
|
.name = "atmel_usart",
|
|
.id = 3,
|
|
.dev = {
|
|
- .platform_data = &uart2_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart2_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart2_data,
|
|
},
|
|
.resource = uart2_resources,
|
|
.num_resources = ARRAY_SIZE(uart2_resources),
|
|
};
|
|
|
|
-static inline void configure_usart2_pins(void)
|
|
+static inline void configure_usart2_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
|
|
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
|
|
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
|
|
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
|
|
}
|
|
|
|
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
struct platform_device *atmel_default_console_device; /* the serial console device */
|
|
|
|
-void __init at91_init_serial(struct at91_uart_config *config)
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
|
|
{
|
|
int i;
|
|
|
|
@@ -917,17 +1193,17 @@
|
|
for (i = 0; i < config->nr_tty; i++) {
|
|
switch (config->tty_map[i]) {
|
|
case 0:
|
|
- configure_usart0_pins();
|
|
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
at91_uarts[i] = &at91sam9263_uart0_device;
|
|
at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
|
|
break;
|
|
case 1:
|
|
- configure_usart1_pins();
|
|
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
at91_uarts[i] = &at91sam9263_uart1_device;
|
|
at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
|
|
break;
|
|
case 2:
|
|
- configure_usart2_pins();
|
|
+ configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
at91_uarts[i] = &at91sam9263_uart2_device;
|
|
at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
|
|
break;
|
|
@@ -949,6 +1225,48 @@
|
|
printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
}
|
|
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0: /* DBGU */
|
|
+ pdev = &at91sam9263_dbgu_device;
|
|
+ configure_dbgu_pins();
|
|
+ at91_clock_associate("mck", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9263_ID_US0:
|
|
+ pdev = &at91sam9263_uart0_device;
|
|
+ configure_usart0_pins(pins);
|
|
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9263_ID_US1:
|
|
+ pdev = &at91sam9263_uart1_device;
|
|
+ configure_usart1_pins(pins);
|
|
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9263_ID_US2:
|
|
+ pdev = &at91sam9263_uart2_device;
|
|
+ configure_usart2_pins(pins);
|
|
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+ pdev->id = portnr; /* update to mapped ID */
|
|
+
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ at91_uarts[portnr] = pdev;
|
|
+}
|
|
+
|
|
+void __init at91_set_serial_console(unsigned portnr)
|
|
+{
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ atmel_default_console_device = at91_uarts[portnr];
|
|
+ if (!atmel_default_console_device)
|
|
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
+}
|
|
+
|
|
void __init at91_add_device_serial(void)
|
|
{
|
|
int i;
|
|
@@ -959,7 +1277,9 @@
|
|
}
|
|
}
|
|
#else
|
|
-void __init at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
|
|
+void __init at91_set_serial_console(unsigned portnr) {}
|
|
void __init at91_add_device_serial(void) {}
|
|
#endif
|
|
|
|
@@ -971,6 +1291,9 @@
|
|
*/
|
|
static int __init at91_add_standard_devices(void)
|
|
{
|
|
+ at91_add_device_rtt();
|
|
+ at91_add_device_watchdog();
|
|
+ at91_add_device_tc();
|
|
return 0;
|
|
}
|
|
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam926x_time.c linux-2.6/arch/arm/mach-at91/at91sam926x_time.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91sam926x_time.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91sam926x_time.c 2008-02-25 22:18:18.000000000 +0200
|
|
@@ -1,23 +1,20 @@
|
|
/*
|
|
- * linux/arch/arm/mach-at91/at91sam926x_time.c
|
|
+ * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
|
|
*
|
|
* Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
|
|
* Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
|
|
+ * Converted to ClockSource/ClockEvents by David Brownell.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
-
|
|
-#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
-#include <linux/sched.h>
|
|
-#include <linux/time.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/clockchips.h>
|
|
|
|
-#include <asm/hardware.h>
|
|
-#include <asm/io.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include <asm/arch/at91_pit.h>
|
|
@@ -26,88 +23,166 @@
|
|
#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
|
|
#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
|
|
|
|
+static u32 pit_cycle; /* write-once */
|
|
+static u32 pit_cnt; /* access only w/system irq blocked */
|
|
+
|
|
+
|
|
/*
|
|
- * Returns number of microseconds since last timer interrupt. Note that interrupts
|
|
- * will have been disabled by do_gettimeofday()
|
|
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
|
|
+ * Clocksource: just a monotonic counter of MCK/16 cycles.
|
|
+ * We don't care whether or not PIT irqs are enabled.
|
|
*/
|
|
-static unsigned long at91sam926x_gettimeoffset(void)
|
|
+static cycle_t read_pit_clk(void)
|
|
{
|
|
- unsigned long elapsed;
|
|
- unsigned long t = at91_sys_read(AT91_PIT_PIIR);
|
|
+ unsigned long flags;
|
|
+ u32 elapsed;
|
|
+ u32 t;
|
|
+
|
|
+ raw_local_irq_save(flags);
|
|
+ elapsed = pit_cnt;
|
|
+ t = at91_sys_read(AT91_PIT_PIIR);
|
|
+ raw_local_irq_restore(flags);
|
|
+
|
|
+ elapsed += PIT_PICNT(t) * pit_cycle;
|
|
+ elapsed += PIT_CPIV(t);
|
|
+ return elapsed;
|
|
+}
|
|
|
|
- elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
|
|
+static struct clocksource pit_clk = {
|
|
+ .name = "pit",
|
|
+ .rating = 175,
|
|
+ .read = read_pit_clk,
|
|
+ .shift = 20,
|
|
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16)
|
|
+ */
|
|
+static void
|
|
+pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
|
|
+{
|
|
+ unsigned long flags;
|
|
|
|
- return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
|
|
+ switch (mode) {
|
|
+ case CLOCK_EVT_MODE_PERIODIC:
|
|
+ case CLOCK_EVT_MODE_RESUME:
|
|
+ /* update clocksource counter, then enable the IRQ */
|
|
+ raw_local_irq_save(flags);
|
|
+ pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
|
|
+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
|
|
+ | AT91_PIT_PITIEN);
|
|
+ raw_local_irq_restore(flags);
|
|
+ break;
|
|
+ case CLOCK_EVT_MODE_ONESHOT:
|
|
+ BUG();
|
|
+ /* FALLTHROUGH */
|
|
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
|
+ case CLOCK_EVT_MODE_UNUSED:
|
|
+ /* disable irq, leaving the clocksource active */
|
|
+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
|
|
+ break;
|
|
+ }
|
|
}
|
|
|
|
+static struct clock_event_device pit_clkevt = {
|
|
+ .name = "pit",
|
|
+ .features = CLOCK_EVT_FEAT_PERIODIC,
|
|
+ .shift = 32,
|
|
+ .rating = 100,
|
|
+ .cpumask = CPU_MASK_CPU0,
|
|
+ .set_mode = pit_clkevt_mode,
|
|
+};
|
|
+
|
|
+
|
|
/*
|
|
* IRQ handler for the timer.
|
|
*/
|
|
-static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
|
|
+static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
|
|
{
|
|
- volatile long nr_ticks;
|
|
|
|
- if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
|
|
- write_seqlock(&xtime_lock);
|
|
+ /* The PIT interrupt may be disabled, and is shared */
|
|
+ if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
|
|
+ && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
|
|
+ unsigned nr_ticks;
|
|
|
|
- /* Get number to ticks performed before interrupt and clear PIT interrupt */
|
|
+ /* Get number of ticks performed before irq, and ack it */
|
|
nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
|
|
do {
|
|
- timer_tick();
|
|
+ pit_cnt += pit_cycle;
|
|
+ pit_clkevt.event_handler(&pit_clkevt);
|
|
nr_ticks--;
|
|
} while (nr_ticks);
|
|
|
|
- write_sequnlock(&xtime_lock);
|
|
return IRQ_HANDLED;
|
|
- } else
|
|
- return IRQ_NONE; /* not handled */
|
|
+ }
|
|
+
|
|
+ return IRQ_NONE;
|
|
}
|
|
|
|
-static struct irqaction at91sam926x_timer_irq = {
|
|
+static struct irqaction at91sam926x_pit_irq = {
|
|
.name = "at91_tick",
|
|
.flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
|
- .handler = at91sam926x_timer_interrupt
|
|
+ .handler = at91sam926x_pit_interrupt
|
|
};
|
|
|
|
-void at91sam926x_timer_reset(void)
|
|
+static void at91sam926x_pit_reset(void)
|
|
{
|
|
- /* Disable timer */
|
|
+ /* Disable timer and irqs */
|
|
at91_sys_write(AT91_PIT_MR, 0);
|
|
|
|
- /* Clear any pending interrupts */
|
|
- (void) at91_sys_read(AT91_PIT_PIVR);
|
|
+ /* Clear any pending interrupts, wait for PIT to stop counting */
|
|
+ while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
|
|
+ cpu_relax();
|
|
|
|
- /* Set Period Interval timer and enable its interrupt */
|
|
- at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
|
|
+ /* Start PIT but don't enable IRQ */
|
|
+ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
|
|
}
|
|
|
|
/*
|
|
- * Set up timer interrupt.
|
|
+ * Set up both clocksource and clockevent support.
|
|
*/
|
|
-void __init at91sam926x_timer_init(void)
|
|
+static void __init at91sam926x_pit_init(void)
|
|
{
|
|
+ unsigned long pit_rate;
|
|
+ unsigned bits;
|
|
+
|
|
+ /*
|
|
+ * Use our actual MCK to figure out how many MCK/16 ticks per
|
|
+ * 1/HZ period (instead of a compile-time constant LATCH).
|
|
+ */
|
|
+ pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
|
|
+ pit_cycle = (pit_rate + HZ/2) / HZ;
|
|
+ WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
|
|
+
|
|
/* Initialize and enable the timer */
|
|
- at91sam926x_timer_reset();
|
|
+ at91sam926x_pit_reset();
|
|
|
|
- /* Make IRQs happen for the system timer. */
|
|
- setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
|
|
+ /*
|
|
+ * Register clocksource. The high order bits of PIV are unused,
|
|
+ * so this isn't a 32-bit counter unless we get clockevent irqs.
|
|
+ */
|
|
+ pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift);
|
|
+ bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
|
|
+ pit_clk.mask = CLOCKSOURCE_MASK(bits);
|
|
+ clocksource_register(&pit_clk);
|
|
+
|
|
+ /* Set up irq handler */
|
|
+ setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
|
|
+
|
|
+ /* Set up and register clockevents */
|
|
+ pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
|
|
+ clockevents_register_device(&pit_clkevt);
|
|
}
|
|
|
|
-#ifdef CONFIG_PM
|
|
-static void at91sam926x_timer_suspend(void)
|
|
+static void at91sam926x_pit_suspend(void)
|
|
{
|
|
/* Disable timer */
|
|
at91_sys_write(AT91_PIT_MR, 0);
|
|
}
|
|
-#else
|
|
-#define at91sam926x_timer_suspend NULL
|
|
-#endif
|
|
|
|
struct sys_timer at91sam926x_timer = {
|
|
- .init = at91sam926x_timer_init,
|
|
- .offset = at91sam926x_gettimeoffset,
|
|
- .suspend = at91sam926x_timer_suspend,
|
|
- .resume = at91sam926x_timer_reset,
|
|
+ .init = at91sam926x_pit_init,
|
|
+ .suspend = at91sam926x_pit_suspend,
|
|
+ .resume = at91sam926x_pit_reset,
|
|
};
|
|
-
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm/mach-at91/at91sam9rl.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91sam9rl.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91sam9rl.c 2008-03-01 19:04:12.000000000 +0200
|
|
@@ -10,6 +10,7 @@
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
+#include <linux/pm.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
@@ -17,6 +18,7 @@
|
|
#include <asm/arch/at91sam9rl.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
#include "clock.h"
|
|
@@ -244,6 +246,11 @@
|
|
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
|
|
}
|
|
|
|
+static void at91sam9rl_poweroff(void)
|
|
+{
|
|
+ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
|
|
+}
|
|
+
|
|
|
|
/* --------------------------------------------------------------------
|
|
* AT91SAM9RL processor initialization
|
|
@@ -274,6 +281,7 @@
|
|
iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
|
|
|
|
at91_arch_reset = at91sam9rl_reset;
|
|
+ pm_power_off = at91sam9rl_poweroff;
|
|
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
|
|
|
|
/* Init clock subsystem */
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c 2008-03-01 22:10:11.000000000 +0200
|
|
@@ -9,6 +9,7 @@
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c-gpio.h>
|
|
|
|
@@ -19,7 +20,7 @@
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/at91sam9rl.h>
|
|
#include <asm/arch/at91sam9rl_matrix.h>
|
|
-#include <asm/arch/at91sam926x_mc.h>
|
|
+#include <asm/arch/at91sam926x_smc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
@@ -29,7 +30,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
|
|
-static u64 mmc_dmamask = 0xffffffffUL;
|
|
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
|
|
static struct at91_mmc_data mmc_data;
|
|
|
|
static struct resource mmc_resources[] = {
|
|
@@ -50,7 +51,7 @@
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &mmc_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &mmc_data,
|
|
},
|
|
.resource = mmc_resources,
|
|
@@ -104,10 +105,15 @@
|
|
#define NAND_BASE AT91_CHIPSELECT_3
|
|
|
|
static struct resource nand_resources[] = {
|
|
- {
|
|
+ [0] = {
|
|
.start = NAND_BASE,
|
|
.end = NAND_BASE + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91_BASE_SYS + AT91_ECC,
|
|
+ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
@@ -247,7 +253,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
|
-static u64 spi_dmamask = 0xffffffffUL;
|
|
+static u64 spi_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource spi_resources[] = {
|
|
[0] = {
|
|
@@ -267,7 +273,7 @@
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &spi_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.resource = spi_resources,
|
|
.num_resources = ARRAY_SIZE(spi_resources),
|
|
@@ -312,7 +318,7 @@
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
|
|
-static u64 lcdc_dmamask = 0xffffffffUL;
|
|
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
|
|
static struct atmel_lcdfb_info lcdc_data;
|
|
|
|
static struct resource lcdc_resources[] = {
|
|
@@ -340,7 +346,7 @@
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &lcdc_dmamask,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &lcdc_data,
|
|
},
|
|
.resource = lcdc_resources,
|
|
@@ -384,24 +390,244 @@
|
|
|
|
|
|
/* --------------------------------------------------------------------
|
|
- * LEDs
|
|
+ * Timer/Counter block
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#ifdef CONFIG_ATMEL_TCLIB
|
|
+
|
|
+static struct resource tcb_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9RL_BASE_TCB0,
|
|
+ .end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9RL_ID_TC0,
|
|
+ .end = AT91SAM9RL_ID_TC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [2] = {
|
|
+ .start = AT91SAM9RL_ID_TC1,
|
|
+ .end = AT91SAM9RL_ID_TC1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+ [3] = {
|
|
+ .start = AT91SAM9RL_ID_TC2,
|
|
+ .end = AT91SAM9RL_ID_TC2,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9rl_tcb_device = {
|
|
+ .name = "atmel_tcb",
|
|
+ .id = 0,
|
|
+ .resource = tcb_resources,
|
|
+ .num_resources = ARRAY_SIZE(tcb_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_tc(void)
|
|
+{
|
|
+ /* this chip has a separate clock and irq for each TC channel */
|
|
+ at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
|
|
+ at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
|
|
+ at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
|
|
+ platform_device_register(&at91sam9rl_tcb_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_tc(void) { }
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * RTC
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
|
|
+static struct platform_device at91sam9rl_rtc_device = {
|
|
+ .name = "at91_rtc",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_rtc(void)
|
|
+{
|
|
+ device_init_wakeup(&at91sam9rl_rtc_device.dev, 1);
|
|
+ platform_device_register(&at91sam9rl_rtc_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_rtc(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * RTT
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+static struct resource rtt_resources[] = {
|
|
+ {
|
|
+ .start = AT91_BASE_SYS + AT91_RTT,
|
|
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9rl_rtt_device = {
|
|
+ .name = "at91_rtt",
|
|
+ .id = -1,
|
|
+ .resource = rtt_resources,
|
|
+ .num_resources = ARRAY_SIZE(rtt_resources),
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_rtt(void)
|
|
+{
|
|
+ device_init_wakeup(&at91sam9rl_rtt_device.dev, 1);
|
|
+ platform_device_register(&at91sam9rl_rtt_device);
|
|
+}
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * Watchdog
|
|
+ * -------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
|
|
+static struct platform_device at91sam9rl_wdt_device = {
|
|
+ .name = "at91_wdt",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+};
|
|
+
|
|
+static void __init at91_add_device_watchdog(void)
|
|
+{
|
|
+ platform_device_register(&at91sam9rl_wdt_device);
|
|
+}
|
|
+#else
|
|
+static void __init at91_add_device_watchdog(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* --------------------------------------------------------------------
|
|
+ * SSC -- Synchronous Serial Controller
|
|
* -------------------------------------------------------------------- */
|
|
|
|
-#if defined(CONFIG_LEDS)
|
|
-u8 at91_leds_cpu;
|
|
-u8 at91_leds_timer;
|
|
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
|
|
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc0_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9RL_BASE_SSC0,
|
|
+ .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9RL_ID_SSC0,
|
|
+ .end = AT91SAM9RL_ID_SSC0,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9rl_ssc0_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc0_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc0_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc0_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_A_periph(AT91_PIN_PC0, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_A_periph(AT91_PIN_PC1, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_A_periph(AT91_PIN_PA15, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_A_periph(AT91_PIN_PA16, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_B_periph(AT91_PIN_PA10, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_B_periph(AT91_PIN_PA22, 1);
|
|
+}
|
|
+
|
|
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ssc1_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91SAM9RL_BASE_SSC1,
|
|
+ .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = {
|
|
+ .start = AT91SAM9RL_ID_SSC1,
|
|
+ .end = AT91SAM9RL_ID_SSC1,
|
|
+ .flags = IORESOURCE_IRQ,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device at91sam9rl_ssc1_device = {
|
|
+ .name = "ssc",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .dma_mask = &ssc1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ },
|
|
+ .resource = ssc1_resources,
|
|
+ .num_resources = ARRAY_SIZE(ssc1_resources),
|
|
+};
|
|
+
|
|
+static inline void configure_ssc1_pins(unsigned pins)
|
|
+{
|
|
+ if (pins & ATMEL_SSC_TF)
|
|
+ at91_set_B_periph(AT91_PIN_PA29, 1);
|
|
+ if (pins & ATMEL_SSC_TK)
|
|
+ at91_set_B_periph(AT91_PIN_PA30, 1);
|
|
+ if (pins & ATMEL_SSC_TD)
|
|
+ at91_set_B_periph(AT91_PIN_PA13, 1);
|
|
+ if (pins & ATMEL_SSC_RD)
|
|
+ at91_set_B_periph(AT91_PIN_PA14, 1);
|
|
+ if (pins & ATMEL_SSC_RK)
|
|
+ at91_set_B_periph(AT91_PIN_PA9, 1);
|
|
+ if (pins & ATMEL_SSC_RF)
|
|
+ at91_set_B_periph(AT91_PIN_PA8, 1);
|
|
+}
|
|
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
|
|
+/*
|
|
+ * SSC controllers are accessed through library code, instead of any
|
|
+ * kind of all-singing/all-dancing driver. For example one could be
|
|
+ * used by a particular I2S audio codec's driver, while another one
|
|
+ * on the same system might be used by a custom data capture driver.
|
|
+ */
|
|
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
|
|
{
|
|
- /* Enable GPIO to access the LEDs */
|
|
- at91_set_gpio_output(cpu_led, 1);
|
|
- at91_set_gpio_output(timer_led, 1);
|
|
+ struct platform_device *pdev;
|
|
|
|
- at91_leds_cpu = cpu_led;
|
|
- at91_leds_timer = timer_led;
|
|
+ /*
|
|
+ * NOTE: caller is responsible for passing information matching
|
|
+ * "pins" to whatever will be using each particular controller.
|
|
+ */
|
|
+ switch (id) {
|
|
+ case AT91SAM9RL_ID_SSC0:
|
|
+ pdev = &at91sam9rl_ssc0_device;
|
|
+ configure_ssc0_pins(pins);
|
|
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
|
|
+ break;
|
|
+ case AT91SAM9RL_ID_SSC1:
|
|
+ pdev = &at91sam9rl_ssc1_device;
|
|
+ configure_ssc1_pins(pins);
|
|
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ platform_device_register(pdev);
|
|
}
|
|
+
|
|
#else
|
|
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
|
|
+struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
|
|
#endif
|
|
|
|
|
|
@@ -428,13 +654,15 @@
|
|
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
|
|
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
|
|
};
|
|
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9rl_dbgu_device = {
|
|
.name = "atmel_usart",
|
|
.id = 0,
|
|
.dev = {
|
|
- .platform_data = &dbgu_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &dbgu_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &dbgu_data,
|
|
},
|
|
.resource = dbgu_resources,
|
|
.num_resources = ARRAY_SIZE(dbgu_resources),
|
|
@@ -463,24 +691,37 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9rl_uart0_device = {
|
|
.name = "atmel_usart",
|
|
.id = 1,
|
|
.dev = {
|
|
- .platform_data = &uart0_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart0_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart0_data,
|
|
},
|
|
.resource = uart0_resources,
|
|
.num_resources = ARRAY_SIZE(uart0_resources),
|
|
};
|
|
|
|
-static inline void configure_usart0_pins(void)
|
|
+static inline void configure_usart0_pins(unsigned pins)
|
|
{
|
|
- at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
|
|
- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
|
|
- at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
|
|
- at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
|
|
+ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
|
|
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
|
|
+ if (pins & ATMEL_UART_DSR)
|
|
+ at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
|
|
+ if (pins & ATMEL_UART_DTR)
|
|
+ at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
|
|
+ if (pins & ATMEL_UART_DCD)
|
|
+ at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
|
|
+ if (pins & ATMEL_UART_RI)
|
|
+ at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
|
|
}
|
|
|
|
static struct resource uart1_resources[] = {
|
|
@@ -500,22 +741,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9rl_uart1_device = {
|
|
.name = "atmel_usart",
|
|
.id = 2,
|
|
.dev = {
|
|
- .platform_data = &uart1_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart1_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart1_data,
|
|
},
|
|
.resource = uart1_resources,
|
|
.num_resources = ARRAY_SIZE(uart1_resources),
|
|
};
|
|
|
|
-static inline void configure_usart1_pins(void)
|
|
+static inline void configure_usart1_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
|
|
}
|
|
|
|
static struct resource uart2_resources[] = {
|
|
@@ -535,22 +783,29 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9rl_uart2_device = {
|
|
.name = "atmel_usart",
|
|
.id = 3,
|
|
.dev = {
|
|
- .platform_data = &uart2_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart2_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart2_data,
|
|
},
|
|
.resource = uart2_resources,
|
|
.num_resources = ARRAY_SIZE(uart2_resources),
|
|
};
|
|
|
|
-static inline void configure_usart2_pins(void)
|
|
+static inline void configure_usart2_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
|
|
at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
|
|
}
|
|
|
|
static struct resource uart3_resources[] = {
|
|
@@ -570,28 +825,35 @@
|
|
.use_dma_tx = 1,
|
|
.use_dma_rx = 1,
|
|
};
|
|
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device at91sam9rl_uart3_device = {
|
|
.name = "atmel_usart",
|
|
.id = 4,
|
|
.dev = {
|
|
- .platform_data = &uart3_data,
|
|
- .coherent_dma_mask = 0xffffffff,
|
|
+ .dma_mask = &uart3_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &uart3_data,
|
|
},
|
|
.resource = uart3_resources,
|
|
.num_resources = ARRAY_SIZE(uart3_resources),
|
|
};
|
|
|
|
-static inline void configure_usart3_pins(void)
|
|
+static inline void configure_usart3_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
|
|
at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
|
|
+
|
|
+ if (pins & ATMEL_UART_RTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
|
|
+ if (pins & ATMEL_UART_CTS)
|
|
+ at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
|
|
}
|
|
|
|
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
|
|
struct platform_device *atmel_default_console_device; /* the serial console device */
|
|
|
|
-void __init at91_init_serial(struct at91_uart_config *config)
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
|
|
{
|
|
int i;
|
|
|
|
@@ -599,22 +861,22 @@
|
|
for (i = 0; i < config->nr_tty; i++) {
|
|
switch (config->tty_map[i]) {
|
|
case 0:
|
|
- configure_usart0_pins();
|
|
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
at91_uarts[i] = &at91sam9rl_uart0_device;
|
|
at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
|
|
break;
|
|
case 1:
|
|
- configure_usart1_pins();
|
|
+ configure_usart1_pins(0);
|
|
at91_uarts[i] = &at91sam9rl_uart1_device;
|
|
at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
|
|
break;
|
|
case 2:
|
|
- configure_usart2_pins();
|
|
+ configure_usart2_pins(0);
|
|
at91_uarts[i] = &at91sam9rl_uart2_device;
|
|
at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
|
|
break;
|
|
case 3:
|
|
- configure_usart3_pins();
|
|
+ configure_usart3_pins(0);
|
|
at91_uarts[i] = &at91sam9rl_uart3_device;
|
|
at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
|
|
break;
|
|
@@ -636,6 +898,53 @@
|
|
printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
}
|
|
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
|
|
+{
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ switch (id) {
|
|
+ case 0: /* DBGU */
|
|
+ pdev = &at91sam9rl_dbgu_device;
|
|
+ configure_dbgu_pins();
|
|
+ at91_clock_associate("mck", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9RL_ID_US0:
|
|
+ pdev = &at91sam9rl_uart0_device;
|
|
+ configure_usart0_pins(pins);
|
|
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9RL_ID_US1:
|
|
+ pdev = &at91sam9rl_uart1_device;
|
|
+ configure_usart1_pins(pins);
|
|
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9RL_ID_US2:
|
|
+ pdev = &at91sam9rl_uart2_device;
|
|
+ configure_usart2_pins(pins);
|
|
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ case AT91SAM9RL_ID_US3:
|
|
+ pdev = &at91sam9rl_uart3_device;
|
|
+ configure_usart3_pins(pins);
|
|
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
|
|
+ break;
|
|
+ default:
|
|
+ return;
|
|
+ }
|
|
+ pdev->id = portnr; /* update to mapped ID */
|
|
+
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ at91_uarts[portnr] = pdev;
|
|
+}
|
|
+
|
|
+void __init at91_set_serial_console(unsigned portnr)
|
|
+{
|
|
+ if (portnr < ATMEL_MAX_UART)
|
|
+ atmel_default_console_device = at91_uarts[portnr];
|
|
+ if (!atmel_default_console_device)
|
|
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
|
|
+}
|
|
+
|
|
void __init at91_add_device_serial(void)
|
|
{
|
|
int i;
|
|
@@ -646,7 +955,9 @@
|
|
}
|
|
}
|
|
#else
|
|
-void __init at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
|
|
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
|
|
+void __init at91_set_serial_console(unsigned portnr) {}
|
|
void __init at91_add_device_serial(void) {}
|
|
#endif
|
|
|
|
@@ -659,6 +970,10 @@
|
|
*/
|
|
static int __init at91_add_standard_devices(void)
|
|
{
|
|
+ at91_add_device_rtc();
|
|
+ at91_add_device_rtt();
|
|
+ at91_add_device_watchdog();
|
|
+ at91_add_device_tc();
|
|
return 0;
|
|
}
|
|
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-cam60.c linux-2.6/arch/arm/mach-at91/board-cam60.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-cam60.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-cam60.c 2008-03-01 20:40:51.000000000 +0200
|
|
@@ -0,0 +1,188 @@
|
|
+/*
|
|
+ * KwikByte CAM60
|
|
+ *
|
|
+ * based on board-sam9260ek.c
|
|
+ * Copyright (C) 2005 SAN People
|
|
+ * Copyright (C) 2006 Atmel
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/spi/flash.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/mach/irq.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+#include "generic.h"
|
|
+
|
|
+
|
|
+/*
|
|
+ * Serial port configuration.
|
|
+ * 0 .. 5 = USART0 .. USART5
|
|
+ * 6 = DBGU
|
|
+ */
|
|
+static struct at91_uart_config __initdata cam60_uart_config = {
|
|
+ .console_tty = 0, /* ttyS0 */
|
|
+ .nr_tty = 1,
|
|
+ .tty_map = { 6, -1, -1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
|
|
+};
|
|
+
|
|
+static void __init cam60_map_io(void)
|
|
+{
|
|
+ /* Initialize processor: 10 MHz crystal */
|
|
+ at91sam9260_initialize(10000000);
|
|
+
|
|
+ /* Setup the serial ports and console */
|
|
+ at91_init_serial(&cam60_uart_config);
|
|
+}
|
|
+
|
|
+static void __init cam60_init_irq(void)
|
|
+{
|
|
+ at91sam9260_init_interrupts(NULL);
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * USB Host
|
|
+ */
|
|
+static struct at91_usbh_data __initdata cam60_usbh_data = {
|
|
+ .ports = 1,
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * SPI devices.
|
|
+ */
|
|
+#if defined(CONFIG_MTD_DATAFLASH)
|
|
+static struct mtd_partition __initdata cam60_spi_partitions[] = {
|
|
+ {
|
|
+ .name = "BOOT1",
|
|
+ .offset = 0,
|
|
+ .size = 4 * 1056,
|
|
+ },
|
|
+ {
|
|
+ .name = "BOOT2",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 256 * 1056,
|
|
+ },
|
|
+ {
|
|
+ .name = "kernel",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 2222 * 1056,
|
|
+ },
|
|
+ {
|
|
+ .name = "file system",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
|
|
+ .name = "spi_flash",
|
|
+ .parts = cam60_spi_partitions,
|
|
+ .nr_parts = ARRAY_SIZE(cam60_spi_partitions)
|
|
+};
|
|
+#endif
|
|
+
|
|
+static struct spi_board_info cam60_spi_devices[] = {
|
|
+#if defined(CONFIG_MTD_DATAFLASH)
|
|
+ { /* DataFlash chip */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ .bus_num = 0,
|
|
+ .platform_data = &cam60_spi_flash_platform_data
|
|
+ },
|
|
+#endif
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * MACB Ethernet device
|
|
+ */
|
|
+static struct __initdata at91_eth_data cam60_macb_data = {
|
|
+ .phy_irq_pin = AT91_PIN_PB5,
|
|
+ .is_rmii = 0,
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * NAND Flash
|
|
+ */
|
|
+static struct mtd_partition __initdata cam60_nand_partition[] = {
|
|
+ {
|
|
+ .name = "nand_fs",
|
|
+ .offset = 0,
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
|
|
+{
|
|
+ *num_partitions = ARRAY_SIZE(cam60_nand_partition);
|
|
+ return cam60_nand_partition;
|
|
+}
|
|
+
|
|
+static struct at91_nand_data __initdata cam60_nand_data = {
|
|
+ .ale = 21,
|
|
+ .cle = 22,
|
|
+ // .det_pin = ... not there
|
|
+ .rdy_pin = AT91_PIN_PA9,
|
|
+ .enable_pin = AT91_PIN_PA7,
|
|
+ .partition_info = nand_partitions,
|
|
+};
|
|
+
|
|
+
|
|
+static void __init cam60_board_init(void)
|
|
+{
|
|
+ /* Serial */
|
|
+ at91_add_device_serial();
|
|
+ /* SPI */
|
|
+ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
|
|
+ /* Ethernet */
|
|
+ at91_add_device_eth(&cam60_macb_data);
|
|
+ /* USB Host */
|
|
+ /* enable USB power supply circuit */
|
|
+ at91_set_gpio_output(AT91_PIN_PB18, 1);
|
|
+ at91_add_device_usbh(&cam60_usbh_data);
|
|
+ /* NAND */
|
|
+ at91_add_device_nand(&cam60_nand_data);
|
|
+}
|
|
+
|
|
+MACHINE_START(CAM60, "KwikByte CAM60")
|
|
+ /* Maintainer: KwikByte */
|
|
+ .phys_io = AT91_BASE_SYS,
|
|
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
|
+ .boot_params = AT91_SDRAM_BASE + 0x100,
|
|
+ .timer = &at91sam926x_timer,
|
|
+ .map_io = cam60_map_io,
|
|
+ .init_irq = cam60_init_irq,
|
|
+ .init_machine = cam60_board_init,
|
|
+MACHINE_END
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/arm/mach-at91/board-cap9adk.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-cap9adk.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-cap9adk.c 2008-03-01 20:43:07.000000000 +0200
|
|
@@ -0,0 +1,359 @@
|
|
+/*
|
|
+ * linux/arch/arm/mach-at91/board-cap9adk.c
|
|
+ *
|
|
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
|
|
+ * Copyright (C) 2005 SAN People
|
|
+ * Copyright (C) 2007 Atmel Corporation.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/spi/ads7846.h>
|
|
+#include <linux/fb.h>
|
|
+#include <linux/mtd/physmap.h>
|
|
+
|
|
+#include <video/atmel_lcdc.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/mach/irq.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+#include <asm/arch/at91cap9_matrix.h>
|
|
+#include <asm/arch/at91sam926x_smc.h>
|
|
+
|
|
+#include "generic.h"
|
|
+
|
|
+
|
|
+static void __init cap9adk_map_io(void)
|
|
+{
|
|
+ /* Initialize processor: 12 MHz crystal */
|
|
+ at91cap9_initialize(12000000);
|
|
+
|
|
+ /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
|
|
+ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
|
|
+ /* ... POWER LED always on */
|
|
+ at91_set_gpio_output(AT91_PIN_PC29, 1);
|
|
+
|
|
+ /* Setup the serial ports and console */
|
|
+ at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */
|
|
+ at91_set_serial_console(0);
|
|
+}
|
|
+
|
|
+static void __init cap9adk_init_irq(void)
|
|
+{
|
|
+ at91cap9_init_interrupts(NULL);
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * USB Host port
|
|
+ */
|
|
+static struct at91_usbh_data __initdata cap9adk_usbh_data = {
|
|
+ .ports = 2,
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * ADS7846 Touchscreen
|
|
+ */
|
|
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
|
+static int ads7843_pendown_state(void)
|
|
+{
|
|
+ return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */
|
|
+}
|
|
+
|
|
+static struct ads7846_platform_data ads_info = {
|
|
+ .model = 7843,
|
|
+ .x_min = 150,
|
|
+ .x_max = 3830,
|
|
+ .y_min = 190,
|
|
+ .y_max = 3830,
|
|
+ .vref_delay_usecs = 100,
|
|
+ .x_plate_ohms = 450,
|
|
+ .y_plate_ohms = 250,
|
|
+ .pressure_max = 15000,
|
|
+ .debounce_max = 1,
|
|
+ .debounce_rep = 0,
|
|
+ .debounce_tol = (~0),
|
|
+ .get_pendown_state = ads7843_pendown_state,
|
|
+};
|
|
+
|
|
+static void __init cap9adk_add_device_ts(void)
|
|
+{
|
|
+ at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */
|
|
+ at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */
|
|
+}
|
|
+#else
|
|
+static void __init cap9adk_add_device_ts(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/*
|
|
+ * SPI devices.
|
|
+ */
|
|
+static struct spi_board_info cap9adk_spi_devices[] = {
|
|
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
|
|
+ { /* DataFlash card */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ .bus_num = 0,
|
|
+ },
|
|
+#endif
|
|
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
|
+ {
|
|
+ .modalias = "ads7846",
|
|
+ .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
|
|
+ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
|
|
+ .bus_num = 0,
|
|
+ .platform_data = &ads_info,
|
|
+ .irq = AT91_PIN_PC4,
|
|
+ },
|
|
+#endif
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * MCI (SD/MMC)
|
|
+ */
|
|
+static struct at91_mmc_data __initdata cap9adk_mmc_data = {
|
|
+ .wire4 = 1,
|
|
+// .det_pin = ... not connected
|
|
+// .wp_pin = ... not connected
|
|
+// .vcc_pin = ... not connected
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * MACB Ethernet device
|
|
+ */
|
|
+static struct at91_eth_data __initdata cap9adk_macb_data = {
|
|
+ .is_rmii = 1,
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * NAND flash
|
|
+ */
|
|
+static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
|
|
+ {
|
|
+ .name = "NAND partition",
|
|
+ .offset = 0,
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
|
|
+{
|
|
+ *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
|
|
+ return cap9adk_nand_partitions;
|
|
+}
|
|
+
|
|
+static struct at91_nand_data __initdata cap9adk_nand_data = {
|
|
+ .ale = 21,
|
|
+ .cle = 22,
|
|
+// .det_pin = ... not connected
|
|
+// .rdy_pin = ... not connected
|
|
+ .enable_pin = AT91_PIN_PD15,
|
|
+ .partition_info = nand_partitions,
|
|
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
|
|
+ .bus_width_16 = 1,
|
|
+#else
|
|
+ .bus_width_16 = 0,
|
|
+#endif
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * NOR flash
|
|
+ */
|
|
+static struct mtd_partition cap9adk_nor_partitions[] = {
|
|
+ {
|
|
+ .name = "NOR partition",
|
|
+ .offset = 0,
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct physmap_flash_data cap9adk_nor_data = {
|
|
+ .width = 2,
|
|
+ .parts = cap9adk_nor_partitions,
|
|
+ .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions),
|
|
+};
|
|
+
|
|
+#define NOR_BASE AT91_CHIPSELECT_0
|
|
+#define NOR_SIZE 0x800000
|
|
+
|
|
+static struct resource nor_flash_resources[] = {
|
|
+ {
|
|
+ .start = NOR_BASE,
|
|
+ .end = NOR_BASE + NOR_SIZE - 1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device cap9adk_nor_flash = {
|
|
+ .name = "physmap-flash",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .platform_data = &cap9adk_nor_data,
|
|
+ },
|
|
+ .resource = nor_flash_resources,
|
|
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
|
|
+};
|
|
+
|
|
+static __init void cap9adk_add_device_nor(void)
|
|
+{
|
|
+ unsigned long csa;
|
|
+
|
|
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
|
|
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
|
|
+
|
|
+ /* set the bus interface characteristics */
|
|
+ at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2)
|
|
+ | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
|
|
+
|
|
+ at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10)
|
|
+ | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
|
|
+
|
|
+ at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
|
|
+
|
|
+ at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE
|
|
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
|
|
+ | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
|
|
+
|
|
+ platform_device_register(&cap9adk_nor_flash);
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * LCD Controller
|
|
+ */
|
|
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
|
|
+static struct fb_videomode at91_tft_vga_modes[] = {
|
|
+ {
|
|
+ .name = "TX09D50VM1CCA @ 60",
|
|
+ .refresh = 60,
|
|
+ .xres = 240, .yres = 320,
|
|
+ .pixclock = KHZ2PICOS(4965),
|
|
+
|
|
+ .left_margin = 1, .right_margin = 33,
|
|
+ .upper_margin = 1, .lower_margin = 0,
|
|
+ .hsync_len = 5, .vsync_len = 1,
|
|
+
|
|
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
+ .vmode = FB_VMODE_NONINTERLACED,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct fb_monspecs at91fb_default_monspecs = {
|
|
+ .manufacturer = "HIT",
|
|
+ .monitor = "TX09D70VM1CCA",
|
|
+
|
|
+ .modedb = at91_tft_vga_modes,
|
|
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
|
|
+ .hfmin = 15000,
|
|
+ .hfmax = 64000,
|
|
+ .vfmin = 50,
|
|
+ .vfmax = 150,
|
|
+};
|
|
+
|
|
+#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
|
|
+ | ATMEL_LCDC_DISTYPE_TFT \
|
|
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
|
|
+
|
|
+static void at91_lcdc_power_control(int on)
|
|
+{
|
|
+ if (on)
|
|
+ at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
|
|
+ else
|
|
+ at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
|
|
+}
|
|
+
|
|
+/* Driver datas */
|
|
+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
|
|
+ .default_bpp = 16,
|
|
+ .default_dmacon = ATMEL_LCDC_DMAEN,
|
|
+ .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2,
|
|
+ .default_monspecs = &at91fb_default_monspecs,
|
|
+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
|
|
+ .guard_time = 1,
|
|
+};
|
|
+
|
|
+#else
|
|
+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
|
|
+#endif
|
|
+
|
|
+
|
|
+/*
|
|
+ * AC97
|
|
+ */
|
|
+static struct atmel_ac97_data cap9adk_ac97_data = {
|
|
+// .reset_pin = ... not connected
|
|
+};
|
|
+
|
|
+
|
|
+static void __init cap9adk_board_init(void)
|
|
+{
|
|
+ /* Serial */
|
|
+ at91_add_device_serial();
|
|
+ /* USB Host */
|
|
+ set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
|
|
+ at91_add_device_usbh(&cap9adk_usbh_data);
|
|
+ /* SPI */
|
|
+ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
|
|
+ /* Touchscreen */
|
|
+ cap9adk_add_device_ts();
|
|
+ /* MMC */
|
|
+ at91_add_device_mmc(1, &cap9adk_mmc_data);
|
|
+ /* Ethernet */
|
|
+ at91_add_device_eth(&cap9adk_macb_data);
|
|
+ /* NAND */
|
|
+ at91_add_device_nand(&cap9adk_nand_data);
|
|
+ /* NOR Flash */
|
|
+ cap9adk_add_device_nor();
|
|
+ /* I2C */
|
|
+ at91_add_device_i2c(NULL, 0);
|
|
+ /* LCD Controller */
|
|
+ set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
|
|
+ at91_add_device_lcdc(&cap9adk_lcdc_data);
|
|
+ /* AC97 */
|
|
+ at91_add_device_ac97(&cap9adk_ac97_data);
|
|
+}
|
|
+
|
|
+MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
|
|
+ /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
|
|
+ .phys_io = AT91_BASE_SYS,
|
|
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
|
+ .boot_params = AT91_SDRAM_BASE + 0x100,
|
|
+ .timer = &at91sam926x_timer,
|
|
+ .map_io = cap9adk_map_io,
|
|
+ .init_irq = cap9adk_init_irq,
|
|
+ .init_machine = cap9adk_board_init,
|
|
+MACHINE_END
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-chub.c linux-2.6/arch/arm/mach-at91/board-chub.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-chub.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-chub.c 2007-12-31 15:18:42.000000000 +0200
|
|
@@ -0,0 +1,132 @@
|
|
+/*
|
|
+ * linux/arch/arm/mach-at91/board-chub.c
|
|
+ *
|
|
+ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board
|
|
+ * by Kuten Ivan
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/mach/irq.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+#include "generic.h"
|
|
+
|
|
+/*
|
|
+ * Serial port configuration.
|
|
+ * 0 .. 3 = USART0 .. USART3
|
|
+ * 4 = DBGU
|
|
+ */
|
|
+static struct at91_uart_config __initdata chub_uart_config = {
|
|
+ .console_tty = 0, /* ttyS0 */
|
|
+ .nr_tty = 5,
|
|
+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
|
|
+};
|
|
+
|
|
+static void __init chub_init_irq(void)
|
|
+{
|
|
+ at91rm9200_init_interrupts(NULL);
|
|
+}
|
|
+
|
|
+static void __init chub_map_io(void)
|
|
+{
|
|
+ /* Initialize clocks: 18.432 MHz crystal */
|
|
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
|
|
+
|
|
+ /* Setup the serial ports and console */
|
|
+ at91_init_serial(&chub_uart_config);
|
|
+}
|
|
+
|
|
+static struct at91_eth_data __initdata chub_eth_data = {
|
|
+ .phy_irq_pin = AT91_PIN_PB29,
|
|
+ .is_rmii = 0,
|
|
+};
|
|
+
|
|
+static struct mtd_partition __initdata chub_nand_partition[] = {
|
|
+ {
|
|
+ .name = "NAND Partition 1",
|
|
+ .offset = 0,
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
|
|
+{
|
|
+ *num_partitions = ARRAY_SIZE(chub_nand_partition);
|
|
+ return chub_nand_partition;
|
|
+}
|
|
+
|
|
+static struct at91_nand_data __initdata chub_nand_data = {
|
|
+ .ale = 22,
|
|
+ .cle = 21,
|
|
+ .enable_pin = AT91_PIN_PA27,
|
|
+ .partition_info = nand_partitions,
|
|
+};
|
|
+
|
|
+static struct spi_board_info chub_spi_devices[] = {
|
|
+ { /* DataFlash chip */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ },
|
|
+};
|
|
+
|
|
+static void __init chub_board_init(void)
|
|
+{
|
|
+ /* Serial */
|
|
+ at91_add_device_serial();
|
|
+ /* I2C */
|
|
+ at91_add_device_i2c(NULL, 0);
|
|
+ /* Ethernet */
|
|
+ at91_add_device_eth(&chub_eth_data);
|
|
+ /* SPI */
|
|
+ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
|
|
+ /* NAND Flash */
|
|
+ at91_add_device_nand(&chub_nand_data);
|
|
+ /* Disable write protect for NAND */
|
|
+ at91_set_gpio_output(AT91_PIN_PB7, 1);
|
|
+ /* Power enable for 3x RS-232 and 1x RS-485 */
|
|
+ at91_set_gpio_output(AT91_PIN_PB9, 1);
|
|
+ /* Disable write protect for FRAM */
|
|
+ at91_set_gpio_output(AT91_PIN_PA21, 1);
|
|
+ /* Disable write protect for Dataflash */
|
|
+ at91_set_gpio_output(AT91_PIN_PA19, 1);
|
|
+}
|
|
+
|
|
+MACHINE_START(CHUB, "Promwad Chub")
|
|
+ /* Maintainer: Ivan Kuten AT Promwad DOT com */
|
|
+ .phys_io = AT91_BASE_SYS,
|
|
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
|
+ .boot_params = AT91_SDRAM_BASE + 0x100,
|
|
+ .timer = &at91rm9200_timer,
|
|
+ .map_io = chub_map_io,
|
|
+ .init_irq = chub_init_irq,
|
|
+ .init_machine = chub_board_init,
|
|
+MACHINE_END
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/arm/mach-at91/board-csb337.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-csb337.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-csb337.c 2008-03-01 22:04:55.000000000 +0200
|
|
@@ -24,6 +24,9 @@
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/input.h>
|
|
+#include <linux/gpio_keys.h>
|
|
#include <linux/mtd/physmap.h>
|
|
|
|
#include <asm/hardware.h>
|
|
@@ -59,6 +62,7 @@
|
|
|
|
/* Setup the LEDs */
|
|
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
|
|
+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */
|
|
|
|
/* Setup the serial ports and console */
|
|
at91_init_serial(&csb337_uart_config);
|
|
@@ -156,6 +160,84 @@
|
|
.num_resources = ARRAY_SIZE(csb_flash_resources),
|
|
};
|
|
|
|
+static struct gpio_led csb337_leds[] = {
|
|
+ { /* "led0", yellow */
|
|
+ .name = "led0",
|
|
+ .gpio = AT91_PIN_PB2,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "heartbeat",
|
|
+ },
|
|
+ { /* "led1", green */
|
|
+ .name = "led1",
|
|
+ .gpio = AT91_PIN_PB1,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "mmc0",
|
|
+ },
|
|
+ { /* "led2", yellow */
|
|
+ .name = "led2",
|
|
+ .gpio = AT91_PIN_PB0,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "ide-disk",
|
|
+ }
|
|
+};
|
|
+
|
|
+/*
|
|
+ * GPIO Buttons
|
|
+ */
|
|
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
+static struct gpio_keys_button csb300_buttons[] = {
|
|
+ {
|
|
+ .gpio = AT91_PIN_PB29,
|
|
+ .code = BTN_0,
|
|
+ .desc = "sw0",
|
|
+ .active_low = 1,
|
|
+ .wakeup = 1,
|
|
+ },
|
|
+ {
|
|
+ .gpio = AT91_PIN_PB28,
|
|
+ .code = BTN_1,
|
|
+ .desc = "sw1",
|
|
+ .active_low = 1,
|
|
+ .wakeup = 1,
|
|
+ },
|
|
+ {
|
|
+ .gpio = AT91_PIN_PA21,
|
|
+ .code = BTN_2,
|
|
+ .desc = "sw2",
|
|
+ .active_low = 1,
|
|
+ .wakeup = 1,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct gpio_keys_platform_data csb300_button_data = {
|
|
+ .buttons = csb300_buttons,
|
|
+ .nbuttons = ARRAY_SIZE(csb300_buttons),
|
|
+};
|
|
+
|
|
+static struct platform_device csb300_button_device = {
|
|
+ .name = "gpio-keys",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+ .dev = {
|
|
+ .platform_data = &csb300_button_data,
|
|
+ }
|
|
+};
|
|
+
|
|
+static void __init csb300_add_device_buttons(void)
|
|
+{
|
|
+ at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */
|
|
+ at91_set_deglitch(AT91_PIN_PB29, 1);
|
|
+ at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */
|
|
+ at91_set_deglitch(AT91_PIN_PB28, 1);
|
|
+ at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */
|
|
+ at91_set_deglitch(AT91_PIN_PA21, 1);
|
|
+
|
|
+ platform_device_register(&csb300_button_device);
|
|
+}
|
|
+#else
|
|
+static void __init csb300_add_device_buttons(void) {}
|
|
+#endif
|
|
+
|
|
static void __init csb337_board_init(void)
|
|
{
|
|
/* Serial */
|
|
@@ -175,8 +257,12 @@
|
|
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
|
|
/* MMC */
|
|
at91_add_device_mmc(0, &csb337_mmc_data);
|
|
+ /* LEDS */
|
|
+ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
|
|
/* NOR flash */
|
|
platform_device_register(&csb_flash);
|
|
+ /* Switches on CSB300 */
|
|
+ csb300_add_device_buttons();
|
|
}
|
|
|
|
MACHINE_START(CSB337, "Cogent CSB337")
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/mach-at91/board-dk.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-dk.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-dk.c 2008-02-18 23:23:26.000000000 +0200
|
|
@@ -25,6 +25,7 @@
|
|
#include <linux/init.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/mtd/physmap.h>
|
|
@@ -73,6 +74,185 @@
|
|
at91rm9200_init_interrupts(NULL);
|
|
}
|
|
|
|
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
|
|
+#include <video/s1d13xxxfb.h>
|
|
+#include <asm/arch/ics1523.h>
|
|
+
|
|
+/* EPSON S1D13806 FB */
|
|
+#define AT91_FB_REG_BASE 0x30000000L
|
|
+#define AT91_FB_REG_SIZE 0x200
|
|
+#define AT91_FB_VMEM_BASE 0x30200000L
|
|
+#define AT91_FB_VMEM_SIZE 0x140000L
|
|
+
|
|
+static void __init dk_init_video(void)
|
|
+{
|
|
+ /* NWAIT Signal */
|
|
+ at91_set_A_periph(AT91_PIN_PC6, 0);
|
|
+
|
|
+ /* Initialization of the Static Memory Controller for Chip Select 2 */
|
|
+ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
|
|
+ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */
|
|
+ | AT91_SMC_TDF_(1) /* float time */
|
|
+ );
|
|
+
|
|
+ at91_ics1523_init();
|
|
+}
|
|
+
|
|
+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
|
|
+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
|
|
+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
|
|
+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
|
|
+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
|
|
+ {S1DREG_GPIO_CNF0, 0x00},
|
|
+ {S1DREG_GPIO_CNF1, 0x00},
|
|
+ {S1DREG_GPIO_CTL0, 0x08},
|
|
+ {S1DREG_GPIO_CTL1, 0x00},
|
|
+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
|
|
+ {S1DREG_LCD_CLK_CNF, 0x00},
|
|
+ {S1DREG_CRT_CLK_CNF, 0x00},
|
|
+ {S1DREG_MPLUG_CLK_CNF, 0x00},
|
|
+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
|
|
+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
|
|
+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
|
|
+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
|
|
+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
|
|
+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
|
|
+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
|
|
+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
|
|
+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
|
|
+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
|
|
+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
|
|
+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
|
|
+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
|
|
+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
|
|
+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
|
|
+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
|
|
+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
|
|
+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
|
|
+ {S1DREG_LCD_DISP_START0, 0x00},
|
|
+ {S1DREG_LCD_DISP_START1, 0xC8},
|
|
+ {S1DREG_LCD_DISP_START2, 0x00},
|
|
+ {S1DREG_LCD_MEM_OFF0, 0x80},
|
|
+ {S1DREG_LCD_MEM_OFF1, 0x02},
|
|
+ {S1DREG_LCD_PIX_PAN, 0x00},
|
|
+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
|
|
+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
|
|
+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
|
|
+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
|
|
+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
|
|
+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
|
|
+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
|
|
+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
|
|
+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
|
|
+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
|
|
+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
|
|
+ {S1DREG_TV_OUT_CTL, 0x10},
|
|
+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
|
|
+ {S1DREG_CRT_DISP_START0, 0x00},
|
|
+ {S1DREG_CRT_DISP_START1, 0x00},
|
|
+ {S1DREG_CRT_DISP_START2, 0x00},
|
|
+ {S1DREG_CRT_MEM_OFF0, 0x80},
|
|
+ {S1DREG_CRT_MEM_OFF1, 0x02},
|
|
+ {S1DREG_CRT_PIX_PAN, 0x00},
|
|
+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
|
|
+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
|
|
+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
|
|
+ {S1DREG_LCD_CUR_START, 0x01},
|
|
+ {S1DREG_LCD_CUR_XPOS0, 0x00},
|
|
+ {S1DREG_LCD_CUR_XPOS1, 0x00},
|
|
+ {S1DREG_LCD_CUR_YPOS0, 0x00},
|
|
+ {S1DREG_LCD_CUR_YPOS1, 0x00},
|
|
+ {S1DREG_LCD_CUR_BCTL0, 0x00},
|
|
+ {S1DREG_LCD_CUR_GCTL0, 0x00},
|
|
+ {S1DREG_LCD_CUR_RCTL0, 0x00},
|
|
+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
|
|
+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
|
|
+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
|
|
+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
|
|
+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
|
|
+ {S1DREG_CRT_CUR_START, 0x01},
|
|
+ {S1DREG_CRT_CUR_XPOS0, 0x00},
|
|
+ {S1DREG_CRT_CUR_XPOS1, 0x00},
|
|
+ {S1DREG_CRT_CUR_YPOS0, 0x00},
|
|
+ {S1DREG_CRT_CUR_YPOS1, 0x00},
|
|
+ {S1DREG_CRT_CUR_BCTL0, 0x00},
|
|
+ {S1DREG_CRT_CUR_GCTL0, 0x00},
|
|
+ {S1DREG_CRT_CUR_RCTL0, 0x00},
|
|
+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
|
|
+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
|
|
+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
|
|
+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
|
|
+ {S1DREG_BBLT_CTL0, 0x00},
|
|
+ {S1DREG_BBLT_CTL0, 0x00},
|
|
+ {S1DREG_BBLT_CC_EXP, 0x00},
|
|
+ {S1DREG_BBLT_OP, 0x00},
|
|
+ {S1DREG_BBLT_SRC_START0, 0x00},
|
|
+ {S1DREG_BBLT_SRC_START1, 0x00},
|
|
+ {S1DREG_BBLT_SRC_START2, 0x00},
|
|
+ {S1DREG_BBLT_DST_START0, 0x00},
|
|
+ {S1DREG_BBLT_DST_START1, 0x00},
|
|
+ {S1DREG_BBLT_DST_START2, 0x00},
|
|
+ {S1DREG_BBLT_MEM_OFF0, 0x00},
|
|
+ {S1DREG_BBLT_MEM_OFF1, 0x00},
|
|
+ {S1DREG_BBLT_WIDTH0, 0x00},
|
|
+ {S1DREG_BBLT_WIDTH1, 0x00},
|
|
+ {S1DREG_BBLT_HEIGHT0, 0x00},
|
|
+ {S1DREG_BBLT_HEIGHT1, 0x00},
|
|
+ {S1DREG_BBLT_BGC0, 0x00},
|
|
+ {S1DREG_BBLT_BGC1, 0x00},
|
|
+ {S1DREG_BBLT_FGC0, 0x00},
|
|
+ {S1DREG_BBLT_FGC1, 0x00},
|
|
+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
|
|
+ {S1DREG_LKUP_ADDR, 0x00},
|
|
+ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */
|
|
+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
|
|
+ {S1DREG_CPU2MEM_WDOGT, 0x00},
|
|
+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
|
|
+};
|
|
+
|
|
+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
|
|
+ .initregs = dk_s1dfb_initregs,
|
|
+ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs),
|
|
+ .platform_init_video = dk_init_video,
|
|
+};
|
|
+
|
|
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource dk_s1dfb_resource[] = {
|
|
+ [0] = { /* video mem */
|
|
+ .name = "s1d13806 memory",
|
|
+ .start = AT91_FB_VMEM_BASE,
|
|
+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = { /* video registers */
|
|
+ .name = "s1d13806 registers",
|
|
+ .start = AT91_FB_REG_BASE,
|
|
+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device dk_s1dfb_device = {
|
|
+ .name = "s1d13806fb",
|
|
+ .id = -1,
|
|
+ .dev = {
|
|
+ .dma_mask = &s1dfb_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &dk_s1dfb_pdata,
|
|
+ },
|
|
+ .resource = dk_s1dfb_resource,
|
|
+ .num_resources = ARRAY_SIZE(dk_s1dfb_resource),
|
|
+};
|
|
+
|
|
+static void __init dk_add_device_video(void)
|
|
+{
|
|
+ platform_device_register(&dk_s1dfb_device);
|
|
+}
|
|
+#else
|
|
+static void __init dk_add_device_video(void) {}
|
|
+#endif
|
|
+
|
|
static struct at91_eth_data __initdata dk_eth_data = {
|
|
.phy_irq_pin = AT91_PIN_PC4,
|
|
.is_rmii = 1,
|
|
@@ -164,7 +344,7 @@
|
|
#define DK_FLASH_SIZE 0x200000
|
|
|
|
static struct physmap_flash_data dk_flash_data = {
|
|
- .width = 2,
|
|
+ .width = 2,
|
|
};
|
|
|
|
static struct resource dk_flash_resource = {
|
|
@@ -183,6 +363,14 @@
|
|
.num_resources = 1,
|
|
};
|
|
|
|
+static struct gpio_led dk_leds[] = {
|
|
+ {
|
|
+ .name = "led0",
|
|
+ .gpio = AT91_PIN_PB2,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "heartbeat",
|
|
+ }
|
|
+};
|
|
|
|
static void __init dk_board_init(void)
|
|
{
|
|
@@ -213,8 +401,14 @@
|
|
at91_add_device_nand(&dk_nand_data);
|
|
/* NOR Flash */
|
|
platform_device_register(&dk_flash);
|
|
+ /* LEDs */
|
|
+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
|
|
+ /* SSC (to LM4549 audio codec) */
|
|
+ at91_add_device_ssc(AT91RM9200_ID_SSC1, ATMEL_SSC_TD | ATMEL_SSC_RX);
|
|
+ /* SSC (to SI3021 line interface) */
|
|
+ at91_add_device_ssc(AT91RM9200_ID_SSC2, ATMEL_SSC_TD | ATMEL_SSC_TK | ATMEL_SSC_RD | ATMEL_SSC_RF);
|
|
/* VGA */
|
|
-// dk_add_device_video();
|
|
+ dk_add_device_video();
|
|
}
|
|
|
|
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-ecbat91.c linux-2.6/arch/arm/mach-at91/board-ecbat91.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-ecbat91.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-ecbat91.c 2007-12-31 15:18:42.000000000 +0200
|
|
@@ -0,0 +1,183 @@
|
|
+/*
|
|
+ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
|
|
+ * Copyright (C) 2007 emQbit.com.
|
|
+ *
|
|
+ * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/spi/flash.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/mach/irq.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+#include "generic.h"
|
|
+
|
|
+
|
|
+/*
|
|
+ * Serial port configuration.
|
|
+ * 0 .. 3 = USART0 .. USART3
|
|
+ * 4 = DBGU
|
|
+ */
|
|
+static struct at91_uart_config __initdata ecb_at91uart_config = {
|
|
+ .console_tty = 0, /* ttyS0 */
|
|
+ .nr_tty = 2,
|
|
+ .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
|
+};
|
|
+
|
|
+static void __init ecb_at91map_io(void)
|
|
+{
|
|
+ /* Initialize processor: 18.432 MHz crystal */
|
|
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
|
|
+
|
|
+ /* Setup the LEDs */
|
|
+ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
|
|
+
|
|
+ /* Setup the serial ports and console */
|
|
+ at91_init_serial(&ecb_at91uart_config);
|
|
+}
|
|
+
|
|
+static void __init ecb_at91init_irq(void)
|
|
+{
|
|
+ at91rm9200_init_interrupts(NULL);
|
|
+}
|
|
+
|
|
+static struct at91_eth_data __initdata ecb_at91eth_data = {
|
|
+ .phy_irq_pin = AT91_PIN_PC4,
|
|
+ .is_rmii = 0,
|
|
+};
|
|
+
|
|
+static struct at91_usbh_data __initdata ecb_at91usbh_data = {
|
|
+ .ports = 1,
|
|
+};
|
|
+
|
|
+static struct at91_mmc_data __initdata ecb_at91mmc_data = {
|
|
+ .slot_b = 0,
|
|
+ .wire4 = 1,
|
|
+};
|
|
+
|
|
+
|
|
+#if defined(CONFIG_MTD_DATAFLASH)
|
|
+static struct mtd_partition __initdata my_flash0_partitions[] =
|
|
+{
|
|
+ { /* 0x8400 */
|
|
+ .name = "Darrell-loader",
|
|
+ .offset = 0,
|
|
+ .size = 12* 1056,
|
|
+ },
|
|
+ {
|
|
+ .name = "U-boot",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 110 * 1056,
|
|
+ },
|
|
+ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
|
|
+ .name = "Uoot-env",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 8 * 1056,
|
|
+ },
|
|
+ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
|
|
+ .name = "Kernel",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 1534 * 1056,
|
|
+ },
|
|
+ { /* 190200 - jffs2 root filesystem */
|
|
+ .name = "Filesystem",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = MTDPART_SIZ_FULL, /* 26 sectors */
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct flash_platform_data __initdata my_flash0_platform = {
|
|
+ .name = "Removable flash card",
|
|
+ .parts = my_flash0_partitions,
|
|
+ .nr_parts = ARRAY_SIZE(my_flash0_partitions)
|
|
+};
|
|
+
|
|
+#endif
|
|
+
|
|
+static struct spi_board_info __initdata ecb_at91spi_devices[] = {
|
|
+ { /* DataFlash chip */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 10 * 1000 * 1000,
|
|
+ .bus_num = 0,
|
|
+#if defined(CONFIG_MTD_DATAFLASH)
|
|
+ .platform_data = &my_flash0_platform,
|
|
+#endif
|
|
+ },
|
|
+ { /* User accessable spi - cs1 (250KHz) */
|
|
+ .modalias = "spi-cs1",
|
|
+ .chip_select = 1,
|
|
+ .max_speed_hz = 250 * 1000,
|
|
+ },
|
|
+ { /* User accessable spi - cs2 (1MHz) */
|
|
+ .modalias = "spi-cs2",
|
|
+ .chip_select = 2,
|
|
+ .max_speed_hz = 1 * 1000 * 1000,
|
|
+ },
|
|
+ { /* User accessable spi - cs3 (10MHz) */
|
|
+ .modalias = "spi-cs3",
|
|
+ .chip_select = 3,
|
|
+ .max_speed_hz = 10 * 1000 * 1000,
|
|
+ },
|
|
+};
|
|
+
|
|
+static void __init ecb_at91board_init(void)
|
|
+{
|
|
+ /* Serial */
|
|
+ at91_add_device_serial();
|
|
+
|
|
+ /* Ethernet */
|
|
+ at91_add_device_eth(&ecb_at91eth_data);
|
|
+
|
|
+ /* USB Host */
|
|
+ at91_add_device_usbh(&ecb_at91usbh_data);
|
|
+
|
|
+ /* I2C */
|
|
+ at91_add_device_i2c(NULL, 0);
|
|
+
|
|
+ /* MMC */
|
|
+ at91_add_device_mmc(0, &ecb_at91mmc_data);
|
|
+
|
|
+ /* SPI */
|
|
+ at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
|
|
+}
|
|
+
|
|
+MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
|
|
+ /* Maintainer: emQbit.com */
|
|
+ .phys_io = AT91_BASE_SYS,
|
|
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
|
+ .boot_params = AT91_SDRAM_BASE + 0x100,
|
|
+ .timer = &at91rm9200_timer,
|
|
+ .map_io = ecb_at91map_io,
|
|
+ .init_irq = ecb_at91init_irq,
|
|
+ .init_machine = ecb_at91board_init,
|
|
+MACHINE_END
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/mach-at91/board-ek.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-ek.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-ek.c 2008-02-18 22:26:42.000000000 +0200
|
|
@@ -25,6 +25,7 @@
|
|
#include <linux/init.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/mtd/physmap.h>
|
|
@@ -73,6 +74,187 @@
|
|
at91rm9200_init_interrupts(NULL);
|
|
}
|
|
|
|
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
|
|
+#include <video/s1d13xxxfb.h>
|
|
+#include <asm/arch/ics1523.h>
|
|
+
|
|
+/* EPSON S1D13806 FB */
|
|
+#define AT91_FB_REG_BASE 0x40000000L
|
|
+#define AT91_FB_REG_SIZE 0x200
|
|
+#define AT91_FB_VMEM_BASE 0x40200000L
|
|
+#define AT91_FB_VMEM_SIZE 0x140000L
|
|
+
|
|
+static void __init ek_init_video(void)
|
|
+{
|
|
+ /* NWAIT Signal */
|
|
+ at91_set_A_periph(AT91_PIN_PC6, 0);
|
|
+
|
|
+ /* Initialization of the Static Memory Controller for Chip Select 3 */
|
|
+ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */
|
|
+ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */
|
|
+ | AT91_SMC_TDF_(1) /* float time */
|
|
+ );
|
|
+
|
|
+ at91_ics1523_init();
|
|
+}
|
|
+
|
|
+/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
|
|
+ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
|
|
+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
|
|
+ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
|
|
+ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
|
|
+ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00
|
|
+ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08
|
|
+ {S1DREG_GPIO_CTL0, 0x00},
|
|
+ {S1DREG_GPIO_CTL1, 0x00},
|
|
+ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
|
|
+ {S1DREG_LCD_CLK_CNF, 0x00},
|
|
+ {S1DREG_CRT_CLK_CNF, 0x00},
|
|
+ {S1DREG_MPLUG_CLK_CNF, 0x00},
|
|
+ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
|
|
+ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
|
|
+ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
|
|
+ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
|
|
+ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
|
|
+ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
|
|
+ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
|
|
+ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
|
|
+ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
|
|
+ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
|
|
+ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
|
|
+ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
|
|
+ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
|
|
+ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
|
|
+ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
|
|
+ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
|
|
+ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
|
|
+ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
|
|
+ {S1DREG_LCD_DISP_START0, 0x00},
|
|
+ {S1DREG_LCD_DISP_START1, 0xC8},
|
|
+ {S1DREG_LCD_DISP_START2, 0x00},
|
|
+ {S1DREG_LCD_MEM_OFF0, 0x80},
|
|
+ {S1DREG_LCD_MEM_OFF1, 0x02},
|
|
+ {S1DREG_LCD_PIX_PAN, 0x00},
|
|
+ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
|
|
+ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
|
|
+ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
|
|
+ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
|
|
+ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
|
|
+ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
|
|
+ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
|
|
+ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
|
|
+ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
|
|
+ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
|
|
+ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
|
|
+ {S1DREG_TV_OUT_CTL, 0x10},
|
|
+ {0x005E, 0x9F},
|
|
+ {0x005F, 0x00},
|
|
+ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
|
|
+ {S1DREG_CRT_DISP_START0, 0x00},
|
|
+ {S1DREG_CRT_DISP_START1, 0x00},
|
|
+ {S1DREG_CRT_DISP_START2, 0x00},
|
|
+ {S1DREG_CRT_MEM_OFF0, 0x80},
|
|
+ {S1DREG_CRT_MEM_OFF1, 0x02},
|
|
+ {S1DREG_CRT_PIX_PAN, 0x00},
|
|
+ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
|
|
+ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
|
|
+ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
|
|
+ {S1DREG_LCD_CUR_START, 0x01},
|
|
+ {S1DREG_LCD_CUR_XPOS0, 0x00},
|
|
+ {S1DREG_LCD_CUR_XPOS1, 0x00},
|
|
+ {S1DREG_LCD_CUR_YPOS0, 0x00},
|
|
+ {S1DREG_LCD_CUR_YPOS1, 0x00},
|
|
+ {S1DREG_LCD_CUR_BCTL0, 0x00},
|
|
+ {S1DREG_LCD_CUR_GCTL0, 0x00},
|
|
+ {S1DREG_LCD_CUR_RCTL0, 0x00},
|
|
+ {S1DREG_LCD_CUR_BCTL1, 0x1F},
|
|
+ {S1DREG_LCD_CUR_GCTL1, 0x3F},
|
|
+ {S1DREG_LCD_CUR_RCTL1, 0x1F},
|
|
+ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
|
|
+ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
|
|
+ {S1DREG_CRT_CUR_START, 0x01},
|
|
+ {S1DREG_CRT_CUR_XPOS0, 0x00},
|
|
+ {S1DREG_CRT_CUR_XPOS1, 0x00},
|
|
+ {S1DREG_CRT_CUR_YPOS0, 0x00},
|
|
+ {S1DREG_CRT_CUR_YPOS1, 0x00},
|
|
+ {S1DREG_CRT_CUR_BCTL0, 0x00},
|
|
+ {S1DREG_CRT_CUR_GCTL0, 0x00},
|
|
+ {S1DREG_CRT_CUR_RCTL0, 0x00},
|
|
+ {S1DREG_CRT_CUR_BCTL1, 0x1F},
|
|
+ {S1DREG_CRT_CUR_GCTL1, 0x3F},
|
|
+ {S1DREG_CRT_CUR_RCTL1, 0x1F},
|
|
+ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
|
|
+ {S1DREG_BBLT_CTL0, 0x00},
|
|
+ {S1DREG_BBLT_CTL0, 0x00},
|
|
+ {S1DREG_BBLT_CC_EXP, 0x00},
|
|
+ {S1DREG_BBLT_OP, 0x00},
|
|
+ {S1DREG_BBLT_SRC_START0, 0x00},
|
|
+ {S1DREG_BBLT_SRC_START1, 0x00},
|
|
+ {S1DREG_BBLT_SRC_START2, 0x00},
|
|
+ {S1DREG_BBLT_DST_START0, 0x00},
|
|
+ {S1DREG_BBLT_DST_START1, 0x00},
|
|
+ {S1DREG_BBLT_DST_START2, 0x00},
|
|
+ {S1DREG_BBLT_MEM_OFF0, 0x00},
|
|
+ {S1DREG_BBLT_MEM_OFF1, 0x00},
|
|
+ {S1DREG_BBLT_WIDTH0, 0x00},
|
|
+ {S1DREG_BBLT_WIDTH1, 0x00},
|
|
+ {S1DREG_BBLT_HEIGHT0, 0x00},
|
|
+ {S1DREG_BBLT_HEIGHT1, 0x00},
|
|
+ {S1DREG_BBLT_BGC0, 0x00},
|
|
+ {S1DREG_BBLT_BGC1, 0x00},
|
|
+ {S1DREG_BBLT_FGC0, 0x00},
|
|
+ {S1DREG_BBLT_FGC1, 0x00},
|
|
+ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
|
|
+ {S1DREG_LKUP_ADDR, 0x00},
|
|
+ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */
|
|
+ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
|
|
+ {S1DREG_CPU2MEM_WDOGT, 0x00},
|
|
+ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
|
|
+};
|
|
+
|
|
+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
|
|
+ .initregs = ek_s1dfb_initregs,
|
|
+ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs),
|
|
+ .platform_init_video = ek_init_video,
|
|
+};
|
|
+
|
|
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
|
|
+
|
|
+static struct resource ek_s1dfb_resource[] = {
|
|
+ [0] = { /* video mem */
|
|
+ .name = "s1d13806 memory",
|
|
+ .start = AT91_FB_VMEM_BASE,
|
|
+ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+ [1] = { /* video registers */
|
|
+ .name = "s1d13806 registers",
|
|
+ .start = AT91_FB_REG_BASE,
|
|
+ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device ek_s1dfb_device = {
|
|
+ .name = "s1d13806fb",
|
|
+ .id = -1,
|
|
+ .dev = {
|
|
+ .dma_mask = &s1dfb_dmamask,
|
|
+ .coherent_dma_mask = DMA_BIT_MASK(32),
|
|
+ .platform_data = &ek_s1dfb_pdata,
|
|
+ },
|
|
+ .resource = ek_s1dfb_resource,
|
|
+ .num_resources = ARRAY_SIZE(ek_s1dfb_resource),
|
|
+};
|
|
+
|
|
+static void __init ek_add_device_video(void)
|
|
+{
|
|
+ platform_device_register(&ek_s1dfb_device);
|
|
+}
|
|
+#else
|
|
+static void __init ek_add_device_video(void) {}
|
|
+#endif
|
|
+
|
|
static struct at91_eth_data __initdata ek_eth_data = {
|
|
.phy_irq_pin = AT91_PIN_PC4,
|
|
.is_rmii = 1,
|
|
@@ -122,7 +304,7 @@
|
|
#define EK_FLASH_SIZE 0x200000
|
|
|
|
static struct physmap_flash_data ek_flash_data = {
|
|
- .width = 2,
|
|
+ .width = 2,
|
|
};
|
|
|
|
static struct resource ek_flash_resource = {
|
|
@@ -141,6 +323,25 @@
|
|
.num_resources = 1,
|
|
};
|
|
|
|
+static struct gpio_led ek_leds[] = {
|
|
+ { /* "user led 1", DS2 */
|
|
+ .name = "green",
|
|
+ .gpio = AT91_PIN_PB0,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "mmc0",
|
|
+ },
|
|
+ { /* "user led 2", DS4 */
|
|
+ .name = "yellow",
|
|
+ .gpio = AT91_PIN_PB1,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "heartbeat",
|
|
+ },
|
|
+ { /* "user led 3", DS6 */
|
|
+ .name = "red",
|
|
+ .gpio = AT91_PIN_PB2,
|
|
+ .active_low = 1,
|
|
+ }
|
|
+};
|
|
|
|
static void __init ek_board_init(void)
|
|
{
|
|
@@ -167,8 +368,10 @@
|
|
#endif
|
|
/* NOR Flash */
|
|
platform_device_register(&ek_flash);
|
|
+ /* LEDs */
|
|
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
|
|
/* VGA */
|
|
-// ek_add_device_video();
|
|
+ ek_add_device_video();
|
|
}
|
|
|
|
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-homematic.c linux-2.6/arch/arm/mach-at91/board-homematic.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-homematic.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-homematic.c 2007-12-31 15:18:42.000000000 +0200
|
|
@@ -0,0 +1,163 @@
|
|
+/*
|
|
+ * linux/arch/arm/mach-at91/board-homematic.c
|
|
+ *
|
|
+ * Copyright (C) 2007 eQ-3 Entwicklung GmbH
|
|
+ *
|
|
+ * based on work
|
|
+ * Copyright (C) 2005 SAN People
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/mtd/physmap.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/mach/irq.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+#include <asm/arch/at91rm9200_mc.h>
|
|
+
|
|
+#include "generic.h"
|
|
+
|
|
+
|
|
+/*
|
|
+ * Serial port configuration.
|
|
+ * 0 .. 3 = USART0 .. USART3
|
|
+ * 4 = DBGU
|
|
+ */
|
|
+static struct at91_uart_config __initdata homematic_uart_config = {
|
|
+ .console_tty = 0, /* ttyS0 */
|
|
+ .nr_tty = 2,
|
|
+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
|
+};
|
|
+
|
|
+static void __init homematic_map_io(void)
|
|
+{
|
|
+ /* Initialize processor: 18.432 MHz crystal */
|
|
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
|
|
+
|
|
+ /* Setup the serial ports and console */
|
|
+ at91_init_serial(&homematic_uart_config);
|
|
+}
|
|
+
|
|
+static void __init homematic_init_irq(void)
|
|
+{
|
|
+ at91rm9200_init_interrupts(NULL);
|
|
+}
|
|
+
|
|
+static struct at91_eth_data __initdata homematic_eth_data = {
|
|
+ .phy_irq_pin = AT91_PIN_PC4,
|
|
+ .is_rmii = 0,
|
|
+};
|
|
+
|
|
+static struct at91_usbh_data __initdata homematic_usbh_data = {
|
|
+ .ports = 2,
|
|
+};
|
|
+
|
|
+static struct at91_udc_data __initdata homematic_udc_data = {
|
|
+ .vbus_pin = AT91_PIN_PD4,
|
|
+ .pullup_pin = AT91_PIN_PD5,
|
|
+};
|
|
+
|
|
+static struct at91_mmc_data __initdata homematic_mmc_data = {
|
|
+ .slot_b = 0,
|
|
+ .wire4 = 1,
|
|
+};
|
|
+
|
|
+static struct spi_board_info homematic_spi_devices[] = {
|
|
+ { /* DataFlash chip */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct mtd_partition __initdata homematic_nand_partition[] = {
|
|
+ {
|
|
+ .name = "root",
|
|
+ .offset = 0,
|
|
+ .size = 0x02000000,
|
|
+ }, {
|
|
+ .name = "storage",
|
|
+ .offset = 0x02000000,
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
|
|
+{
|
|
+ *num_partitions = ARRAY_SIZE(homematic_nand_partition);
|
|
+ return homematic_nand_partition;
|
|
+}
|
|
+
|
|
+static struct at91_nand_data __initdata homematic_nand_data = {
|
|
+ .ale = 22,
|
|
+ .cle = 21,
|
|
+// .det_pin = AT91_PIN_PB1,
|
|
+ .rdy_pin = AT91_PIN_PC2,
|
|
+ .enable_pin = AT91_PIN_PC0,
|
|
+ .partition_info = nand_partitions,
|
|
+};
|
|
+
|
|
+static void __init homematic_board_init(void)
|
|
+{
|
|
+ /* Serial */
|
|
+ at91_add_device_serial();
|
|
+ /* Ethernet */
|
|
+ at91_add_device_eth(&homematic_eth_data);
|
|
+ /* USB Host */
|
|
+ at91_add_device_usbh(&homematic_usbh_data);
|
|
+ /* USB Device */
|
|
+ at91_add_device_udc(&homematic_udc_data);
|
|
+ at91_set_multi_drive(homematic_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
|
|
+ /* I2C */
|
|
+ at91_add_device_i2c(NULL, 0);
|
|
+ /* SPI */
|
|
+ at91_add_device_spi(homematic_spi_devices, ARRAY_SIZE(homematic_spi_devices));
|
|
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
|
+ /* DataFlash card */
|
|
+ at91_set_gpio_output(AT91_PIN_PB7, 0);
|
|
+#else
|
|
+ /* MMC */
|
|
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
|
|
+ at91_add_device_mmc(0, &homematic_mmc_data);
|
|
+#endif
|
|
+ /* NAND */
|
|
+ at91_add_device_nand(&homematic_nand_data);
|
|
+}
|
|
+
|
|
+MACHINE_START(HOMEMATIC, "HomeMatic")
|
|
+ /* Maintainer: eQ-3 */
|
|
+ .phys_io = AT91_BASE_SYS,
|
|
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
|
+ .boot_params = AT91_SDRAM_BASE + 0x100,
|
|
+ .timer = &at91rm9200_timer,
|
|
+ .map_io = homematic_map_io,
|
|
+ .init_irq = homematic_init_irq,
|
|
+ .init_machine = homematic_board_init,
|
|
+MACHINE_END
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/arm/mach-at91/board-kb9202.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-kb9202.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-kb9202.c 2008-02-18 23:21:36.000000000 +0200
|
|
@@ -37,6 +37,8 @@
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
+#include <asm/arch/at91rm9200_mc.h>
|
|
+
|
|
#include "generic.h"
|
|
|
|
|
|
@@ -111,6 +113,48 @@
|
|
.partition_info = nand_partitions,
|
|
};
|
|
|
|
+
|
|
+#if defined(CONFIG_FB_S1D15605)
|
|
+#warning "The Reset pin must be passed via platform_data, not this way"
|
|
+static struct resource kb9202_lcd_resources[] = {
|
|
+ [0] = {
|
|
+ .start = AT91_CHIPSELECT_2,
|
|
+ .end = AT91_CHIPSELECT_2 + 0x200FF,
|
|
+ .flags = IORESOURCE_MEM
|
|
+ },
|
|
+ [1] = { /* reset pin */
|
|
+ .start = AT91_PIN_PC22,
|
|
+ .end = AT91_PIN_PC22,
|
|
+ .flags = IORESOURCE_MEM
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device kb9202_lcd_device = {
|
|
+ .name = "s1d15605fb",
|
|
+ .id = 0,
|
|
+ .num_resources = ARRAY_SIZE(kb9202_lcd_resources),
|
|
+ .resource = kb9202_lcd_resources,
|
|
+};
|
|
+
|
|
+static void __init kb9202_add_device_lcd(void)
|
|
+{
|
|
+ /* In case the boot loader did not set the chip select mode and timing */
|
|
+ at91_sys_write(AT91_SMC_CSR(2),
|
|
+ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
|
|
+ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
|
|
+
|
|
+ /* Backlight pin = output, off */
|
|
+ at91_set_gpio_output(AT91_PIN_PC23, 0);
|
|
+
|
|
+ /* Reset pin = output, in reset */
|
|
+ at91_set_gpio_output(AT91_PIN_PC22, 0);
|
|
+
|
|
+ platform_device_register(&kb9202_lcd_device);
|
|
+}
|
|
+#else
|
|
+static void __init kb9202_add_device_lcd(void) {}
|
|
+#endif
|
|
+
|
|
static void __init kb9202_board_init(void)
|
|
{
|
|
/* Serial */
|
|
@@ -129,6 +173,8 @@
|
|
at91_add_device_spi(NULL, 0);
|
|
/* NAND */
|
|
at91_add_device_nand(&kb9202_nand_data);
|
|
+ /* LCD */
|
|
+ kb9202_add_device_lcd();
|
|
}
|
|
|
|
MACHINE_START(KB9200, "KB920x")
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9-l9260.c linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-sam9-l9260.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c 2008-03-01 20:39:38.000000000 +0200
|
|
@@ -0,0 +1,199 @@
|
|
+/*
|
|
+ * linux/arch/arm/mach-at91/board-sam9-l9260.c
|
|
+ *
|
|
+ * Copyright (C) 2005 SAN People
|
|
+ * Copyright (C) 2006 Atmel
|
|
+ * Copyright (C) 2007 Olimex Ltd
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spi/spi.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/mach/irq.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+#include "generic.h"
|
|
+
|
|
+
|
|
+/*
|
|
+ * Serial port configuration.
|
|
+ * 0 .. 5 = USART0 .. USART5
|
|
+ * 6 = DBGU
|
|
+ */
|
|
+static struct at91_uart_config __initdata ek_uart_config = {
|
|
+ .console_tty = 0, /* ttyS0 */
|
|
+ .nr_tty = 3,
|
|
+ .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
|
|
+};
|
|
+
|
|
+static void __init ek_map_io(void)
|
|
+{
|
|
+ /* Initialize processor: 18.432 MHz crystal */
|
|
+ at91sam9260_initialize(18432000);
|
|
+
|
|
+ /* Setup the LEDs */
|
|
+ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
|
|
+
|
|
+ /* Setup the serial ports and console */
|
|
+ at91_init_serial(&ek_uart_config);
|
|
+}
|
|
+
|
|
+static void __init ek_init_irq(void)
|
|
+{
|
|
+ at91sam9260_init_interrupts(NULL);
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * USB Host port
|
|
+ */
|
|
+static struct at91_usbh_data __initdata ek_usbh_data = {
|
|
+ .ports = 2,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * USB Device port
|
|
+ */
|
|
+static struct at91_udc_data __initdata ek_udc_data = {
|
|
+ .vbus_pin = AT91_PIN_PC5,
|
|
+ .pullup_pin = 0, /* pull-up driven by UDC */
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * SPI devices.
|
|
+ */
|
|
+static struct spi_board_info ek_spi_devices[] = {
|
|
+#if !defined(CONFIG_MMC_AT91)
|
|
+ { /* DataFlash chip */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 1,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ .bus_num = 0,
|
|
+ },
|
|
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
|
|
+ { /* DataFlash card */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ .bus_num = 0,
|
|
+ },
|
|
+#endif
|
|
+#endif
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * MACB Ethernet device
|
|
+ */
|
|
+static struct at91_eth_data __initdata ek_macb_data = {
|
|
+ .phy_irq_pin = AT91_PIN_PA7,
|
|
+ .is_rmii = 0,
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * NAND flash
|
|
+ */
|
|
+static struct mtd_partition __initdata ek_nand_partition[] = {
|
|
+ {
|
|
+ .name = "Bootloader Area",
|
|
+ .offset = 0,
|
|
+ .size = 10 * 1024 * 1024,
|
|
+ },
|
|
+ {
|
|
+ .name = "User Area",
|
|
+ .offset = 10 * 1024 * 1024,
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
|
|
+{
|
|
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
|
|
+ return ek_nand_partition;
|
|
+}
|
|
+
|
|
+static struct at91_nand_data __initdata ek_nand_data = {
|
|
+ .ale = 21,
|
|
+ .cle = 22,
|
|
+// .det_pin = ... not connected
|
|
+ .rdy_pin = AT91_PIN_PC13,
|
|
+ .enable_pin = AT91_PIN_PC14,
|
|
+ .partition_info = nand_partitions,
|
|
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
|
|
+ .bus_width_16 = 1,
|
|
+#else
|
|
+ .bus_width_16 = 0,
|
|
+#endif
|
|
+};
|
|
+
|
|
+
|
|
+/*
|
|
+ * MCI (SD/MMC)
|
|
+ */
|
|
+static struct at91_mmc_data __initdata ek_mmc_data = {
|
|
+ .slot_b = 1,
|
|
+ .wire4 = 1,
|
|
+ .det_pin = AT91_PIN_PC8,
|
|
+ .wp_pin = AT91_PIN_PC4,
|
|
+// .vcc_pin = ... not connected
|
|
+};
|
|
+
|
|
+static void __init ek_board_init(void)
|
|
+{
|
|
+ /* Serial */
|
|
+ at91_add_device_serial();
|
|
+ /* USB Host */
|
|
+ at91_add_device_usbh(&ek_usbh_data);
|
|
+ /* USB Device */
|
|
+ at91_add_device_udc(&ek_udc_data);
|
|
+ /* SPI */
|
|
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
|
|
+ /* NAND */
|
|
+ at91_add_device_nand(&ek_nand_data);
|
|
+ /* Ethernet */
|
|
+ at91_add_device_eth(&ek_macb_data);
|
|
+ /* MMC */
|
|
+ at91_add_device_mmc(0, &ek_mmc_data);
|
|
+ /* I2C */
|
|
+ at91_add_device_i2c(NULL, 0);
|
|
+}
|
|
+
|
|
+MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
|
|
+ /* Maintainer: Olimex */
|
|
+ .phys_io = AT91_BASE_SYS,
|
|
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
|
+ .boot_params = AT91_SDRAM_BASE + 0x100,
|
|
+ .timer = &at91sam926x_timer,
|
|
+ .map_io = ek_map_io,
|
|
+ .init_irq = ek_init_irq,
|
|
+ .init_machine = ek_board_init,
|
|
+MACHINE_END
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arch/arm/mach-at91/board-sam9260ek.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-sam9260ek.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-sam9260ek.c 2008-03-01 20:40:19.000000000 +0200
|
|
@@ -25,6 +25,8 @@
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
+#include <linux/spi/at73c213.h>
|
|
+#include <linux/clk.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/setup.h>
|
|
@@ -37,29 +39,29 @@
|
|
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
-#include <asm/arch/at91sam926x_mc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
-/*
|
|
- * Serial port configuration.
|
|
- * 0 .. 5 = USART0 .. USART5
|
|
- * 6 = DBGU
|
|
- */
|
|
-static struct at91_uart_config __initdata ek_uart_config = {
|
|
- .console_tty = 0, /* ttyS0 */
|
|
- .nr_tty = 3,
|
|
- .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
|
|
-};
|
|
-
|
|
static void __init ek_map_io(void)
|
|
{
|
|
/* Initialize processor: 18.432 MHz crystal */
|
|
at91sam9260_initialize(18432000);
|
|
|
|
- /* Setup the serial ports and console */
|
|
- at91_init_serial(&ek_uart_config);
|
|
+ /* DGBU on ttyS0. (Rx & Tx only) */
|
|
+ at91_register_uart(0, 0, 0);
|
|
+
|
|
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
|
|
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
|
|
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
|
|
+ | ATMEL_UART_RI);
|
|
+
|
|
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
|
|
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
+
|
|
+ /* set serial console to ttyS0 (ie, DBGU) */
|
|
+ at91_set_serial_console(0);
|
|
}
|
|
|
|
static void __init ek_init_irq(void)
|
|
@@ -85,6 +87,36 @@
|
|
|
|
|
|
/*
|
|
+ * Audio
|
|
+ */
|
|
+static struct at73c213_board_info at73c213_data = {
|
|
+ .ssc_id = 0,
|
|
+ .shortname = "AT91SAM9260-EK external DAC",
|
|
+};
|
|
+
|
|
+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
|
|
+static void __init at73c213_set_clk(struct at73c213_board_info *info)
|
|
+{
|
|
+ struct clk *pck0;
|
|
+ struct clk *plla;
|
|
+
|
|
+ pck0 = clk_get(NULL, "pck0");
|
|
+ plla = clk_get(NULL, "plla");
|
|
+
|
|
+ /* AT73C213 MCK Clock */
|
|
+ at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */
|
|
+
|
|
+ clk_set_parent(pck0, plla);
|
|
+ clk_set_rate(pck0, 12416000);
|
|
+ clk_enable(pck0);
|
|
+
|
|
+ info->dac_clk = pck0;
|
|
+}
|
|
+#else
|
|
+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
|
|
+#endif
|
|
+
|
|
+/*
|
|
* SPI devices.
|
|
*/
|
|
static struct spi_board_info ek_spi_devices[] = {
|
|
@@ -110,6 +142,8 @@
|
|
.chip_select = 0,
|
|
.max_speed_hz = 10 * 1000 * 1000,
|
|
.bus_num = 1,
|
|
+ .mode = SPI_MODE_1,
|
|
+ .platform_data = &at73c213_data,
|
|
},
|
|
#endif
|
|
};
|
|
@@ -172,6 +206,24 @@
|
|
// .vcc_pin = ... not connected
|
|
};
|
|
|
|
+
|
|
+/*
|
|
+ * LEDs
|
|
+ */
|
|
+static struct gpio_led ek_leds[] = {
|
|
+ { /* "bottom" led, green, userled1 to be defined */
|
|
+ .name = "ds5",
|
|
+ .gpio = AT91_PIN_PA6,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "none",
|
|
+ },
|
|
+ { /* "power" led, yellow */
|
|
+ .name = "ds1",
|
|
+ .gpio = AT91_PIN_PA9,
|
|
+ .default_trigger = "heartbeat",
|
|
+ }
|
|
+};
|
|
+
|
|
static void __init ek_board_init(void)
|
|
{
|
|
/* Serial */
|
|
@@ -190,6 +242,14 @@
|
|
at91_add_device_mmc(0, &ek_mmc_data);
|
|
/* I2C */
|
|
at91_add_device_i2c(NULL, 0);
|
|
+ /* SSC (to AT73C213) */
|
|
+ at73c213_set_clk(&at73c213_data);
|
|
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
|
|
+ /* LEDs */
|
|
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
|
|
+ /* shutdown controller, wakeup button (5 msec low) */
|
|
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
|
|
+ | AT91_SHDW_RTTWKEN);
|
|
}
|
|
|
|
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arch/arm/mach-at91/board-sam9261ek.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-sam9261ek.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-sam9261ek.c 2008-03-04 21:05:58.000000000 +0200
|
|
@@ -26,6 +26,8 @@
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/ads7846.h>
|
|
+#include <linux/spi/at73c213.h>
|
|
+#include <linux/clk.h>
|
|
#include <linux/dm9000.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/gpio_keys.h>
|
|
@@ -44,22 +46,12 @@
|
|
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
-#include <asm/arch/at91sam926x_mc.h>
|
|
+#include <asm/arch/at91sam926x_smc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
-/*
|
|
- * Serial port configuration.
|
|
- * 0 .. 2 = USART0 .. USART2
|
|
- * 3 = DBGU
|
|
- */
|
|
-static struct at91_uart_config __initdata ek_uart_config = {
|
|
- .console_tty = 0, /* ttyS0 */
|
|
- .nr_tty = 1,
|
|
- .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */
|
|
-};
|
|
-
|
|
static void __init ek_map_io(void)
|
|
{
|
|
/* Initialize processor: 18.432 MHz crystal */
|
|
@@ -68,8 +60,11 @@
|
|
/* Setup the LEDs */
|
|
at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
|
|
|
|
- /* Setup the serial ports and console */
|
|
- at91_init_serial(&ek_uart_config);
|
|
+ /* DGBU on ttyS0. (Rx & Tx only) */
|
|
+ at91_register_uart(0, 0, 0);
|
|
+
|
|
+ /* set serial console to ttyS0 (ie, DBGU) */
|
|
+ at91_set_serial_console(0);
|
|
}
|
|
|
|
static void __init ek_init_irq(void)
|
|
@@ -239,6 +234,36 @@
|
|
#endif
|
|
|
|
/*
|
|
+ * Audio
|
|
+ */
|
|
+static struct at73c213_board_info at73c213_data = {
|
|
+ .ssc_id = 1,
|
|
+ .shortname = "AT91SAM9261-EK external DAC",
|
|
+};
|
|
+
|
|
+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
|
|
+static void __init at73c213_set_clk(struct at73c213_board_info *info)
|
|
+{
|
|
+ struct clk *pck2;
|
|
+ struct clk *plla;
|
|
+
|
|
+ pck2 = clk_get(NULL, "pck2");
|
|
+ plla = clk_get(NULL, "plla");
|
|
+
|
|
+ /* AT73C213 MCK Clock */
|
|
+ at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */
|
|
+
|
|
+ clk_set_parent(pck2, plla);
|
|
+ clk_set_rate(pck2, 12416000);
|
|
+ clk_enable(pck2);
|
|
+
|
|
+ info->dac_clk = pck2;
|
|
+}
|
|
+#else
|
|
+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
|
|
+#endif
|
|
+
|
|
+/*
|
|
* SPI devices
|
|
*/
|
|
static struct spi_board_info ek_spi_devices[] = {
|
|
@@ -256,6 +281,7 @@
|
|
.bus_num = 0,
|
|
.platform_data = &ads_info,
|
|
.irq = AT91SAM9261_ID_IRQ0,
|
|
+ .controller_data = (void *) AT91_PIN_PA28, /* CS pin */
|
|
},
|
|
#endif
|
|
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
|
|
@@ -271,6 +297,9 @@
|
|
.chip_select = 3,
|
|
.max_speed_hz = 10 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
+ .mode = SPI_MODE_1,
|
|
+ .platform_data = &at73c213_data,
|
|
+ .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */
|
|
},
|
|
#endif
|
|
};
|
|
@@ -280,6 +309,68 @@
|
|
* LCD Controller
|
|
*/
|
|
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
|
|
+
|
|
+#if defined(CONFIG_FB_ATMEL_STN)
|
|
+
|
|
+/* STN */
|
|
+static struct fb_videomode at91_stn_modes[] = {
|
|
+ {
|
|
+ .name = "SP06Q002 @ 75",
|
|
+ .refresh = 75,
|
|
+ .xres = 320, .yres = 240,
|
|
+ .pixclock = KHZ2PICOS(1440),
|
|
+
|
|
+ .left_margin = 1, .right_margin = 1,
|
|
+ .upper_margin = 0, .lower_margin = 0,
|
|
+ .hsync_len = 1, .vsync_len = 1,
|
|
+
|
|
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
+ .vmode = FB_VMODE_NONINTERLACED,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct fb_monspecs at91fb_default_stn_monspecs = {
|
|
+ .manufacturer = "HIT",
|
|
+ .monitor = "SP06Q002",
|
|
+
|
|
+ .modedb = at91_stn_modes,
|
|
+ .modedb_len = ARRAY_SIZE(at91_stn_modes),
|
|
+ .hfmin = 15000,
|
|
+ .hfmax = 64000,
|
|
+ .vfmin = 50,
|
|
+ .vfmax = 150,
|
|
+};
|
|
+
|
|
+#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
|
|
+ | ATMEL_LCDC_DISTYPE_STNMONO \
|
|
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
|
|
+ | ATMEL_LCDC_IFWIDTH_4 \
|
|
+ | ATMEL_LCDC_SCANMOD_SINGLE)
|
|
+
|
|
+static void at91_lcdc_stn_power_control(int on)
|
|
+{
|
|
+ /* backlight */
|
|
+ if (on) { /* power up */
|
|
+ at91_set_gpio_value(AT91_PIN_PC14, 0);
|
|
+ at91_set_gpio_value(AT91_PIN_PC15, 0);
|
|
+ } else { /* power down */
|
|
+ at91_set_gpio_value(AT91_PIN_PC14, 1);
|
|
+ at91_set_gpio_value(AT91_PIN_PC15, 1);
|
|
+ }
|
|
+}
|
|
+
|
|
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
|
|
+ .default_bpp = 1,
|
|
+ .default_dmacon = ATMEL_LCDC_DMAEN,
|
|
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2,
|
|
+ .default_monspecs = &at91fb_default_stn_monspecs,
|
|
+ .atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
|
|
+ .guard_time = 1,
|
|
+};
|
|
+
|
|
+#else
|
|
+
|
|
+/* TFT */
|
|
static struct fb_videomode at91_tft_vga_modes[] = {
|
|
{
|
|
.name = "TX09D50VM1CCA @ 60",
|
|
@@ -296,7 +387,7 @@
|
|
},
|
|
};
|
|
|
|
-static struct fb_monspecs at91fb_default_monspecs = {
|
|
+static struct fb_monspecs at91fb_default_tft_monspecs = {
|
|
.manufacturer = "HIT",
|
|
.monitor = "TX09D50VM1CCA",
|
|
|
|
@@ -308,11 +399,11 @@
|
|
.vfmax = 150,
|
|
};
|
|
|
|
-#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
|
|
+#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
|
|
| ATMEL_LCDC_DISTYPE_TFT \
|
|
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
|
|
|
|
-static void at91_lcdc_power_control(int on)
|
|
+static void at91_lcdc_tft_power_control(int on)
|
|
{
|
|
if (on)
|
|
at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
|
|
@@ -320,15 +411,16 @@
|
|
at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
|
|
}
|
|
|
|
-/* Driver datas */
|
|
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
|
|
+ .lcdcon_is_backlight = true,
|
|
.default_bpp = 16,
|
|
.default_dmacon = ATMEL_LCDC_DMAEN,
|
|
- .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
|
|
- .default_monspecs = &at91fb_default_monspecs,
|
|
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
|
|
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2,
|
|
+ .default_monspecs = &at91fb_default_tft_monspecs,
|
|
+ .atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
|
|
.guard_time = 1,
|
|
};
|
|
+#endif
|
|
|
|
#else
|
|
static struct atmel_lcdfb_info __initdata ek_lcdc_data;
|
|
@@ -342,25 +434,25 @@
|
|
static struct gpio_keys_button ek_buttons[] = {
|
|
{
|
|
.gpio = AT91_PIN_PA27,
|
|
- .keycode = BTN_0,
|
|
+ .code = BTN_0,
|
|
.desc = "Button 0",
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.gpio = AT91_PIN_PA26,
|
|
- .keycode = BTN_1,
|
|
+ .code = BTN_1,
|
|
.desc = "Button 1",
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.gpio = AT91_PIN_PA25,
|
|
- .keycode = BTN_2,
|
|
+ .code = BTN_2,
|
|
.desc = "Button 2",
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.gpio = AT91_PIN_PA24,
|
|
- .keycode = BTN_3,
|
|
+ .code = BTN_3,
|
|
.desc = "Button 3",
|
|
.active_low = 1,
|
|
}
|
|
@@ -397,6 +489,29 @@
|
|
static void __init ek_add_device_buttons(void) {}
|
|
#endif
|
|
|
|
+/*
|
|
+ * LEDs
|
|
+ */
|
|
+static struct gpio_led ek_leds[] = {
|
|
+ { /* "bottom" led, green, userled1 to be defined */
|
|
+ .name = "ds7",
|
|
+ .gpio = AT91_PIN_PA14,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "none",
|
|
+ },
|
|
+ { /* "top" led, green, userled2 to be defined */
|
|
+ .name = "ds8",
|
|
+ .gpio = AT91_PIN_PA13,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "none",
|
|
+ },
|
|
+ { /* "power" led, yellow */
|
|
+ .name = "ds1",
|
|
+ .gpio = AT91_PIN_PA23,
|
|
+ .default_trigger = "heartbeat",
|
|
+ }
|
|
+};
|
|
+
|
|
static void __init ek_board_init(void)
|
|
{
|
|
/* Serial */
|
|
@@ -418,6 +533,9 @@
|
|
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
|
|
/* Touchscreen */
|
|
ek_add_device_ts();
|
|
+ /* SSC (to AT73C213) */
|
|
+ at73c213_set_clk(&at73c213_data);
|
|
+ at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
|
|
#else
|
|
/* MMC */
|
|
at91_add_device_mmc(0, &ek_mmc_data);
|
|
@@ -426,6 +544,11 @@
|
|
at91_add_device_lcdc(&ek_lcdc_data);
|
|
/* Push Buttons */
|
|
ek_add_device_buttons();
|
|
+ /* LEDs */
|
|
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
|
|
+ /* shutdown controller, wakeup button (5 msec low) */
|
|
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
|
|
+ | AT91_SHDW_RTTWKEN);
|
|
}
|
|
|
|
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arch/arm/mach-at91/board-sam9263ek.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-sam9263ek.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-sam9263ek.c 2008-03-01 20:41:13.000000000 +0200
|
|
@@ -27,6 +27,8 @@
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/ads7846.h>
|
|
#include <linux/fb.h>
|
|
+#include <linux/gpio_keys.h>
|
|
+#include <linux/input.h>
|
|
|
|
#include <video/atmel_lcdc.h>
|
|
|
|
@@ -41,29 +43,24 @@
|
|
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
-#include <asm/arch/at91sam926x_mc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
-/*
|
|
- * Serial port configuration.
|
|
- * 0 .. 2 = USART0 .. USART2
|
|
- * 3 = DBGU
|
|
- */
|
|
-static struct at91_uart_config __initdata ek_uart_config = {
|
|
- .console_tty = 0, /* ttyS0 */
|
|
- .nr_tty = 2,
|
|
- .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */
|
|
-};
|
|
-
|
|
static void __init ek_map_io(void)
|
|
{
|
|
/* Initialize processor: 16.367 MHz crystal */
|
|
at91sam9263_initialize(16367660);
|
|
|
|
- /* Setup the serial ports and console */
|
|
- at91_init_serial(&ek_uart_config);
|
|
+ /* DGBU on ttyS0. (Rx & Tx only) */
|
|
+ at91_register_uart(0, 0, 0);
|
|
+
|
|
+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
|
|
+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
+
|
|
+ /* set serial console to ttyS0 (ie, DBGU) */
|
|
+ at91_set_serial_console(0);
|
|
}
|
|
|
|
static void __init ek_init_irq(void)
|
|
@@ -163,6 +160,7 @@
|
|
* MACB Ethernet device
|
|
*/
|
|
static struct at91_eth_data __initdata ek_macb_data = {
|
|
+ .phy_irq_pin = AT91_PIN_PE31,
|
|
.is_rmii = 1,
|
|
};
|
|
|
|
@@ -242,14 +240,12 @@
|
|
|
|
static void at91_lcdc_power_control(int on)
|
|
{
|
|
- if (on)
|
|
- at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */
|
|
- else
|
|
- at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */
|
|
+ at91_set_gpio_value(AT91_PIN_PA30, on);
|
|
}
|
|
|
|
/* Driver datas */
|
|
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
|
|
+ .lcdcon_is_backlight = true,
|
|
.default_bpp = 16,
|
|
.default_dmacon = ATMEL_LCDC_DMAEN,
|
|
.default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
|
|
@@ -264,6 +260,55 @@
|
|
|
|
|
|
/*
|
|
+ * GPIO Buttons
|
|
+ */
|
|
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
+static struct gpio_keys_button ek_buttons[] = {
|
|
+ { /* BP1, "leftclic" */
|
|
+ .code = BTN_LEFT,
|
|
+ .gpio = AT91_PIN_PC5,
|
|
+ .active_low = 1,
|
|
+ .desc = "left_click",
|
|
+ .wakeup = 1,
|
|
+ },
|
|
+ { /* BP2, "rightclic" */
|
|
+ .code = BTN_RIGHT,
|
|
+ .gpio = AT91_PIN_PC4,
|
|
+ .active_low = 1,
|
|
+ .desc = "right_click",
|
|
+ .wakeup = 1,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct gpio_keys_platform_data ek_button_data = {
|
|
+ .buttons = ek_buttons,
|
|
+ .nbuttons = ARRAY_SIZE(ek_buttons),
|
|
+};
|
|
+
|
|
+static struct platform_device ek_button_device = {
|
|
+ .name = "gpio-keys",
|
|
+ .id = -1,
|
|
+ .num_resources = 0,
|
|
+ .dev = {
|
|
+ .platform_data = &ek_button_data,
|
|
+ }
|
|
+};
|
|
+
|
|
+static void __init ek_add_device_buttons(void)
|
|
+{
|
|
+ at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
|
|
+ at91_set_deglitch(AT91_PIN_PC5, 1);
|
|
+ at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
|
|
+ at91_set_deglitch(AT91_PIN_PC4, 1);
|
|
+
|
|
+ platform_device_register(&ek_button_device);
|
|
+}
|
|
+#else
|
|
+static void __init ek_add_device_buttons(void) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/*
|
|
* AC97
|
|
*/
|
|
static struct atmel_ac97_data ek_ac97_data = {
|
|
@@ -271,6 +316,30 @@
|
|
};
|
|
|
|
|
|
+/*
|
|
+ * LEDs ... these could all be PWM-driven, for variable brightness
|
|
+ */
|
|
+static struct gpio_led ek_leds[] = {
|
|
+ { /* "left" led, green, userled1, pwm1 */
|
|
+ .name = "ds1",
|
|
+ .gpio = AT91_PIN_PB8,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "mmc0",
|
|
+ },
|
|
+ { /* "right" led, green, userled2, pwm2 */
|
|
+ .name = "ds2",
|
|
+ .gpio = AT91_PIN_PC29,
|
|
+ .active_low = 1,
|
|
+ .default_trigger = "nand-disk",
|
|
+ },
|
|
+ { /* "power" led, yellow, pwm0 */
|
|
+ .name = "ds3",
|
|
+ .gpio = AT91_PIN_PB7,
|
|
+ .default_trigger = "heartbeat",
|
|
+ }
|
|
+};
|
|
+
|
|
+
|
|
static void __init ek_board_init(void)
|
|
{
|
|
/* Serial */
|
|
@@ -294,8 +363,15 @@
|
|
at91_add_device_i2c(NULL, 0);
|
|
/* LCD Controller */
|
|
at91_add_device_lcdc(&ek_lcdc_data);
|
|
+ /* Push Buttons */
|
|
+ ek_add_device_buttons();
|
|
/* AC97 */
|
|
at91_add_device_ac97(&ek_ac97_data);
|
|
+ /* LEDs */
|
|
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
|
|
+ /* shutdown controller, wakeup button (5 msec low) */
|
|
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
|
|
+ | AT91_SHDW_RTTWKEN);
|
|
}
|
|
|
|
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch/arm/mach-at91/board-sam9rlek.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-sam9rlek.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-sam9rlek.c 2008-03-01 20:39:17.000000000 +0200
|
|
@@ -29,29 +29,24 @@
|
|
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
-#include <asm/arch/at91sam926x_mc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
|
|
#include "generic.h"
|
|
|
|
|
|
-/*
|
|
- * Serial port configuration.
|
|
- * 0 .. 3 = USART0 .. USART3
|
|
- * 4 = DBGU
|
|
- */
|
|
-static struct at91_uart_config __initdata ek_uart_config = {
|
|
- .console_tty = 0, /* ttyS0 */
|
|
- .nr_tty = 2,
|
|
- .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
|
|
-};
|
|
-
|
|
static void __init ek_map_io(void)
|
|
{
|
|
/* Initialize processor: 12.000 MHz crystal */
|
|
at91sam9rl_initialize(12000000);
|
|
|
|
- /* Setup the serial ports and console */
|
|
- at91_init_serial(&ek_uart_config);
|
|
+ /* DGBU on ttyS0. (Rx & Tx only) */
|
|
+ at91_register_uart(0, 0, 0);
|
|
+
|
|
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
|
|
+ at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
|
|
+
|
|
+ /* set serial console to ttyS0 (ie, DBGU) */
|
|
+ at91_set_serial_console(0);
|
|
}
|
|
|
|
static void __init ek_init_irq(void)
|
|
@@ -190,6 +185,9 @@
|
|
at91_add_device_mmc(0, &ek_mmc_data);
|
|
/* LCD Controller */
|
|
at91_add_device_lcdc(&ek_lcdc_data);
|
|
+ /* shutdown controller, wakeup button (5 msec low) */
|
|
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
|
|
+ | AT91_SHDW_RTTWKEN);
|
|
}
|
|
|
|
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-tms.c linux-2.6/arch/arm/mach-at91/board-tms.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/board-tms.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/board-tms.c 2007-12-31 15:18:42.000000000 +0200
|
|
@@ -0,0 +1,198 @@
|
|
+/*
|
|
+* linux/arch/arm/mach-at91/board-tms.c
|
|
+*
|
|
+* Copyright (C) 2005 SAN People
|
|
+*
|
|
+* Adapted from board-dk to sweda TMS-100 by Luiz de Barros <lboneto@gmail.com>
|
|
+*
|
|
+* This program is free software; you can redistribute it and/or modify
|
|
+* it under the terms of the GNU General Public License as published by
|
|
+* the Free Software Foundation; either version 2 of the License, or
|
|
+* (at your option) any later version.
|
|
+*
|
|
+* This program is distributed in the hope that it will be useful,
|
|
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+* GNU General Public License for more details.
|
|
+*
|
|
+* You should have received a copy of the GNU General Public License
|
|
+* along with this program; if not, write to the Free Software
|
|
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+*/
|
|
+
|
|
+#include <linux/types.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/mm.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/mtd/physmap.h>
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/map.h>
|
|
+#include <asm/mach/irq.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+#include <asm/arch/at91rm9200_mc.h>
|
|
+
|
|
+#include "generic.h"
|
|
+#include <linux/serial_8250.h>
|
|
+
|
|
+
|
|
+#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP| UPF_SHARE_IRQ)
|
|
+#define SERIAL_CLK (1843200)
|
|
+
|
|
+
|
|
+/*---------------------------------------------------------------------
|
|
+ * External UART
|
|
+ */
|
|
+
|
|
+#define PORT(_base, _irq) \
|
|
+ { \
|
|
+ .mapbase = _base, \
|
|
+ .irq = _irq, \
|
|
+ .uartclk = SERIAL_CLK, \
|
|
+ .iotype = UPIO_MEM, \
|
|
+ .regshift = 0, \
|
|
+ .flags = SERIAL_FLAGS, \
|
|
+ }
|
|
+
|
|
+static struct plat_serial8250_port tms_data[] = {
|
|
+ PORT(0x70000000, AT91_PIN_PC3),
|
|
+ PORT(0x80000000, AT91_PIN_PC5),
|
|
+ { },
|
|
+};
|
|
+
|
|
+static struct platform_device tms_device = {
|
|
+ .name = "serial8250",
|
|
+ .id = PLAT8250_DEV_PLATFORM,
|
|
+ .dev =
|
|
+ {
|
|
+ .platform_data = &tms_data,
|
|
+ },
|
|
+};
|
|
+
|
|
+static void setup_external_uart(void)
|
|
+{
|
|
+ at91_sys_write(AT91_SMC_CSR(2),
|
|
+ AT91_SMC_ACSS_STD
|
|
+ | AT91_SMC_DBW_8
|
|
+ | AT91_SMC_BAT
|
|
+ | AT91_SMC_WSEN
|
|
+ | AT91_SMC_NWS_(32) /* wait states */
|
|
+ | AT91_SMC_RWSETUP_(6) /* setup time */
|
|
+ | AT91_SMC_RWHOLD_(4) /* hold time */
|
|
+
|
|
+ );
|
|
+ at91_sys_write(AT91_SMC_CSR(6),
|
|
+ AT91_SMC_ACSS_STD
|
|
+ | AT91_SMC_DBW_8
|
|
+ | AT91_SMC_BAT
|
|
+ | AT91_SMC_WSEN
|
|
+ | AT91_SMC_NWS_(32) /* wait states */
|
|
+ | AT91_SMC_RWSETUP_(6) /* setup time */
|
|
+ | AT91_SMC_RWHOLD_(4) /* hold time */
|
|
+
|
|
+ );
|
|
+ at91_sys_write(AT91_SMC_CSR(7),
|
|
+ AT91_SMC_ACSS_STD
|
|
+ | AT91_SMC_DBW_8
|
|
+ | AT91_SMC_BAT
|
|
+ | AT91_SMC_WSEN
|
|
+ | AT91_SMC_NWS_(32) /* wait states */
|
|
+ | AT91_SMC_RWSETUP_(6) /* setup time */
|
|
+ | AT91_SMC_RWHOLD_(4) /* hold time */
|
|
+ );
|
|
+
|
|
+ platform_device_register(&tms_device);
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Serial port configuration.
|
|
+ * 0 .. 3 = USART0 .. USART3
|
|
+ * 4 = DBGU
|
|
+ */
|
|
+static struct at91_uart_config __initdata tms_uart_config = {
|
|
+ .console_tty = 0, /* ttyS0 */
|
|
+ .nr_tty = 5,
|
|
+ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
|
|
+};
|
|
+
|
|
+static void __init tms_map_io(void)
|
|
+{
|
|
+ /* Initialize processor: 18.432 MHz crystal */
|
|
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
|
|
+
|
|
+ /* Setup the LEDs */
|
|
+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
|
|
+
|
|
+ /* Setup the serial ports and console */
|
|
+ at91_init_serial(&tms_uart_config);
|
|
+}
|
|
+
|
|
+static void __init tms_init_irq(void)
|
|
+{
|
|
+ at91rm9200_init_interrupts(NULL);
|
|
+}
|
|
+
|
|
+
|
|
+static struct at91_eth_data __initdata tms_eth_data = {
|
|
+ .phy_irq_pin = AT91_PIN_PC4,
|
|
+ .is_rmii = 1,
|
|
+};
|
|
+
|
|
+static struct at91_usbh_data __initdata tms_usbh_data = {
|
|
+ .ports = 2,
|
|
+};
|
|
+
|
|
+static struct spi_board_info tms_spi_devices[] = {
|
|
+ { /* DataFlash chip */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ },
|
|
+ { /* DataFlash chip */
|
|
+ .modalias = "mtd_dataflash",
|
|
+ .chip_select = 1,
|
|
+ .max_speed_hz = 15 * 1000 * 1000,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct i2c_board_info __initdata tms_i2c_devices[] = {
|
|
+ {
|
|
+ I2C_BOARD_INFO("isl1208", 0x6f),
|
|
+ }
|
|
+};
|
|
+
|
|
+static void __init tms_board_init(void)
|
|
+{
|
|
+ /* Serial */
|
|
+ at91_add_device_serial();
|
|
+ /* Ethernet */
|
|
+ at91_add_device_eth(&tms_eth_data);
|
|
+ at91_add_device_usbh(&tms_usbh_data);
|
|
+ /* I2C */
|
|
+ at91_add_device_i2c(tms_i2c_devices, ARRAY_SIZE(tms_i2c_devices));
|
|
+ /* SPI */
|
|
+ at91_add_device_spi(tms_spi_devices, ARRAY_SIZE(tms_spi_devices));
|
|
+ /* Two port external UART */
|
|
+ setup_external_uart();
|
|
+}
|
|
+
|
|
+MACHINE_START(SWEDATMS, "Sweda TMS-100 Board")
|
|
+ /* Maintainer: Luiz de Barros */
|
|
+ .phys_io = AT91_BASE_SYS,
|
|
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
|
|
+ .boot_params = AT91_SDRAM_BASE + 0x100,
|
|
+ .timer = &at91rm9200_timer,
|
|
+ .map_io = tms_map_io,
|
|
+ .init_irq = tms_init_irq,
|
|
+ .init_machine = tms_board_init,
|
|
+MACHINE_END
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach-at91/clock.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/clock.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/clock.c 2008-02-18 18:34:06.000000000 +0200
|
|
@@ -32,6 +32,7 @@
|
|
#include <asm/arch/cpu.h>
|
|
|
|
#include "clock.h"
|
|
+#include "generic.h"
|
|
|
|
|
|
/*
|
|
@@ -254,6 +255,23 @@
|
|
|
|
/*------------------------------------------------------------------------*/
|
|
|
|
+#ifdef CONFIG_PM
|
|
+
|
|
+int clk_must_disable(struct clk *clk)
|
|
+{
|
|
+ if (!at91_suspend_entering_slow_clock())
|
|
+ return 0;
|
|
+
|
|
+ while (clk->parent)
|
|
+ clk = clk->parent;
|
|
+ return clk != &clk32k;
|
|
+}
|
|
+EXPORT_SYMBOL(clk_must_disable);
|
|
+
|
|
+#endif
|
|
+
|
|
+/*------------------------------------------------------------------------*/
|
|
+
|
|
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
|
|
|
|
/*
|
|
@@ -343,7 +361,7 @@
|
|
EXPORT_SYMBOL(clk_set_parent);
|
|
|
|
/* establish PCK0..PCK3 parentage and rate */
|
|
-static void init_programmable_clock(struct clk *clk)
|
|
+static void __init init_programmable_clock(struct clk *clk)
|
|
{
|
|
struct clk *parent;
|
|
u32 pckr;
|
|
@@ -574,6 +592,8 @@
|
|
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
|
|
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
|
|
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
|
|
+ } else if (cpu_is_at91cap9()) {
|
|
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
|
|
}
|
|
at91_sys_write(AT91_CKGR_PLLBR, 0);
|
|
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/generic.h linux-2.6/arch/arm/mach-at91/generic.h
|
|
--- linux-2.6.24/arch/arm/mach-at91/generic.h 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/generic.h 2008-02-18 23:29:29.000000000 +0200
|
|
@@ -15,6 +15,7 @@
|
|
extern void __init at91sam9263_initialize(unsigned long main_clock);
|
|
extern void __init at91sam9rl_initialize(unsigned long main_clock);
|
|
extern void __init at91x40_initialize(unsigned long main_clock);
|
|
+extern void __init at91cap9_initialize(unsigned long main_clock);
|
|
|
|
/* Interrupts */
|
|
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
|
|
@@ -23,6 +24,7 @@
|
|
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
|
|
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
|
|
extern void __init at91x40_init_interrupts(unsigned int priority[]);
|
|
+extern void __init at91cap9_init_interrupts(unsigned int priority[]);
|
|
extern void __init at91_aic_init(unsigned int priority[]);
|
|
|
|
/* Timer */
|
|
@@ -39,12 +41,16 @@
|
|
/* Power Management */
|
|
extern void at91_irq_suspend(void);
|
|
extern void at91_irq_resume(void);
|
|
+extern int at91_suspend_entering_slow_clock(void);
|
|
|
|
/* GPIO */
|
|
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
|
|
#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
|
|
|
|
struct at91_gpio_bank {
|
|
+ unsigned chipbase; /* bank's first GPIO number */
|
|
+ void __iomem *regbase; /* base of register bank */
|
|
+ struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */
|
|
unsigned short id; /* peripheral ID */
|
|
unsigned long offset; /* offset from system peripheral base */
|
|
struct clk *clock; /* associated clock */
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach-at91/gpio.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/gpio.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/gpio.c 2008-03-01 18:01:29.000000000 +0200
|
|
@@ -13,6 +13,8 @@
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
+#include <linux/debugfs.h>
|
|
+#include <linux/seq_file.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
@@ -31,12 +33,10 @@
|
|
|
|
static inline void __iomem *pin_to_controller(unsigned pin)
|
|
{
|
|
- void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
|
|
-
|
|
pin -= PIN_BASE;
|
|
pin /= 32;
|
|
if (likely(pin < gpio_banks))
|
|
- return sys_base + gpio[pin].offset;
|
|
+ return gpio[pin].regbase;
|
|
|
|
return NULL;
|
|
}
|
|
@@ -292,11 +292,11 @@
|
|
int i;
|
|
|
|
for (i = 0; i < gpio_banks; i++) {
|
|
- u32 pio = gpio[i].offset;
|
|
+ void __iomem *pio = gpio[i].regbase;
|
|
|
|
- backups[i] = at91_sys_read(pio + PIO_IMR);
|
|
- at91_sys_write(pio + PIO_IDR, backups[i]);
|
|
- at91_sys_write(pio + PIO_IER, wakeups[i]);
|
|
+ backups[i] = __raw_readl(pio + PIO_IMR);
|
|
+ __raw_writel(backups[i], pio + PIO_IDR);
|
|
+ __raw_writel(wakeups[i], pio + PIO_IER);
|
|
|
|
if (!wakeups[i])
|
|
clk_disable(gpio[i].clock);
|
|
@@ -313,13 +313,13 @@
|
|
int i;
|
|
|
|
for (i = 0; i < gpio_banks; i++) {
|
|
- u32 pio = gpio[i].offset;
|
|
+ void __iomem *pio = gpio[i].regbase;
|
|
|
|
if (!wakeups[i])
|
|
clk_enable(gpio[i].clock);
|
|
|
|
- at91_sys_write(pio + PIO_IDR, wakeups[i]);
|
|
- at91_sys_write(pio + PIO_IER, backups[i]);
|
|
+ __raw_writel(wakeups[i], pio + PIO_IDR);
|
|
+ __raw_writel(backups[i], pio + PIO_IER);
|
|
}
|
|
}
|
|
|
|
@@ -359,7 +359,13 @@
|
|
|
|
static int gpio_irq_type(unsigned pin, unsigned type)
|
|
{
|
|
- return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
|
|
+ switch (type) {
|
|
+ case IRQ_TYPE_NONE:
|
|
+ case IRQ_TYPE_EDGE_BOTH:
|
|
+ return 0;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
}
|
|
|
|
static struct irq_chip gpio_irqchip = {
|
|
@@ -374,20 +380,30 @@
|
|
{
|
|
unsigned pin;
|
|
struct irq_desc *gpio;
|
|
+ struct at91_gpio_bank *bank;
|
|
void __iomem *pio;
|
|
u32 isr;
|
|
|
|
- pio = get_irq_chip_data(irq);
|
|
+ bank = get_irq_chip_data(irq);
|
|
+ pio = bank->regbase;
|
|
|
|
/* temporarily mask (level sensitive) parent IRQ */
|
|
desc->chip->ack(irq);
|
|
for (;;) {
|
|
- /* reading ISR acks the pending (edge triggered) GPIO interrupt */
|
|
+ /* Reading ISR acks pending (edge triggered) GPIO interrupts.
|
|
+ * When there none are pending, we're finished unless we need
|
|
+ * to process multiple banks (like ID_PIOCDE on sam9263).
|
|
+ */
|
|
isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
|
|
- if (!isr)
|
|
- break;
|
|
+ if (!isr) {
|
|
+ if (!bank->next)
|
|
+ break;
|
|
+ bank = bank->next;
|
|
+ pio = bank->regbase;
|
|
+ continue;
|
|
+ }
|
|
|
|
- pin = (unsigned) get_irq_data(irq);
|
|
+ pin = bank->chipbase;
|
|
gpio = &irq_desc[pin];
|
|
|
|
while (isr) {
|
|
@@ -414,29 +430,94 @@
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
+#ifdef CONFIG_DEBUG_FS
|
|
+
|
|
+static int at91_gpio_show(struct seq_file *s, void *unused)
|
|
+{
|
|
+ int bank, j;
|
|
+
|
|
+ /* print heading */
|
|
+ seq_printf(s, "Pin\t");
|
|
+ for (bank = 0; bank < gpio_banks; bank++) {
|
|
+ seq_printf(s, "PIO%c\t", 'A' + bank);
|
|
+ };
|
|
+ seq_printf(s, "\n\n");
|
|
+
|
|
+ /* print pin status */
|
|
+ for (j = 0; j < 32; j++) {
|
|
+ seq_printf(s, "%i:\t", j);
|
|
+
|
|
+ for (bank = 0; bank < gpio_banks; bank++) {
|
|
+ unsigned pin = PIN_BASE + (32 * bank) + j;
|
|
+ void __iomem *pio = pin_to_controller(pin);
|
|
+ unsigned mask = pin_to_mask(pin);
|
|
+
|
|
+ if (__raw_readl(pio + PIO_PSR) & mask)
|
|
+ seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
|
|
+ else
|
|
+ seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
|
|
+
|
|
+ seq_printf(s, "\t");
|
|
+ }
|
|
+
|
|
+ seq_printf(s, "\n");
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int at91_gpio_open(struct inode *inode, struct file *file)
|
|
+{
|
|
+ return single_open(file, at91_gpio_show, NULL);
|
|
+}
|
|
+
|
|
+static const struct file_operations at91_gpio_operations = {
|
|
+ .open = at91_gpio_open,
|
|
+ .read = seq_read,
|
|
+ .llseek = seq_lseek,
|
|
+ .release = single_release,
|
|
+};
|
|
+
|
|
+static int __init at91_gpio_debugfs_init(void)
|
|
+{
|
|
+ /* /sys/kernel/debug/at91_gpio */
|
|
+ (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
|
|
+ return 0;
|
|
+}
|
|
+postcore_initcall(at91_gpio_debugfs_init);
|
|
+
|
|
+#endif
|
|
+
|
|
+/*--------------------------------------------------------------------------*/
|
|
+
|
|
+/*
|
|
+ * This lock class tells lockdep that GPIO irqs are in a different
|
|
+ * category than their parents, so it won't report false recursion.
|
|
+ */
|
|
+static struct lock_class_key gpio_lock_class;
|
|
+
|
|
/*
|
|
* Called from the processor-specific init to enable GPIO interrupt support.
|
|
*/
|
|
void __init at91_gpio_irq_setup(void)
|
|
{
|
|
- unsigned pioc, pin;
|
|
+ unsigned pioc, pin;
|
|
+ struct at91_gpio_bank *this, *prev;
|
|
|
|
- for (pioc = 0, pin = PIN_BASE;
|
|
- pioc < gpio_banks;
|
|
- pioc++) {
|
|
- void __iomem *controller;
|
|
- unsigned id = gpio[pioc].id;
|
|
+ for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
|
|
+ pioc++ < gpio_banks;
|
|
+ prev = this, this++) {
|
|
+ unsigned id = this->id;
|
|
unsigned i;
|
|
|
|
- clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
|
|
+ /* enable PIO controller's clock */
|
|
+ clk_enable(this->clock);
|
|
|
|
- controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
|
|
- __raw_writel(~0, controller + PIO_IDR);
|
|
+ __raw_writel(~0, this->regbase + PIO_IDR);
|
|
|
|
- set_irq_data(id, (void *) pin);
|
|
- set_irq_chip_data(id, controller);
|
|
+ for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
|
|
+ lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
|
|
|
|
- for (i = 0; i < 32; i++, pin++) {
|
|
/*
|
|
* Can use the "simple" and not "edge" handler since it's
|
|
* shorter, and the AIC handles interrupts sanely.
|
|
@@ -446,6 +527,14 @@
|
|
set_irq_flags(pin, IRQF_VALID);
|
|
}
|
|
|
|
+ /* The toplevel handler handles one bank of GPIOs, except
|
|
+ * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in
|
|
+ * the list, so we only set up that handler.
|
|
+ */
|
|
+ if (prev && prev->next == this)
|
|
+ continue;
|
|
+
|
|
+ set_irq_chip_data(id, this);
|
|
set_irq_chained_handler(id, gpio_irq_handler);
|
|
}
|
|
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
|
|
@@ -456,8 +545,21 @@
|
|
*/
|
|
void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
|
|
{
|
|
+ unsigned i;
|
|
+ struct at91_gpio_bank *last;
|
|
+
|
|
BUG_ON(nr_banks > MAX_GPIO_BANKS);
|
|
|
|
gpio = data;
|
|
gpio_banks = nr_banks;
|
|
+
|
|
+ for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
|
|
+ data->chipbase = PIN_BASE + i * 32;
|
|
+ data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
|
|
+
|
|
+ /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
|
|
+ /* AT91CAP9_ID_PIOABCD groups PIOA, PIOB, PIOC, PIOD */
|
|
+ if (last && last->id == data->id)
|
|
+ last->next = data;
|
|
+ }
|
|
}
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/ics1523.c linux-2.6/arch/arm/mach-at91/ics1523.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/ics1523.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/ics1523.c 2008-03-01 22:05:07.000000000 +0200
|
|
@@ -0,0 +1,208 @@
|
|
+/*
|
|
+ * arch/arm/mach-at91rm9200/ics1523.c
|
|
+ *
|
|
+ * Copyright (C) 2003 ATMEL Rousset
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/io.h>
|
|
+
|
|
+#include <linux/clk.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/kernel.h>
|
|
+
|
|
+#include <asm/arch/ics1523.h>
|
|
+#include <asm/arch/at91_twi.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+/* TWI Errors */
|
|
+#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
|
|
+
|
|
+
|
|
+static void __iomem *twi_base;
|
|
+
|
|
+#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
|
|
+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
|
|
+
|
|
+
|
|
+/* -----------------------------------------------------------------------------
|
|
+ * Initialization of TWI CLOCK
|
|
+ * ----------------------------------------------------------------------------- */
|
|
+
|
|
+static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
|
|
+{
|
|
+ int sclock;
|
|
+
|
|
+ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
|
|
+ sclock = (10*mck_khz / ICS_TRANSFER_RATE);
|
|
+ if (sclock % 10 >= 5)
|
|
+ sclock = (sclock /10) - 5;
|
|
+ else
|
|
+ sclock = (sclock /10)- 6;
|
|
+ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */
|
|
+
|
|
+ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
|
|
+}
|
|
+
|
|
+/* -----------------------------------------------------------------------------
|
|
+ * Read a byte with TWI Interface from the Clock Generator ICS1523
|
|
+ * ----------------------------------------------------------------------------- */
|
|
+
|
|
+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
|
|
+{
|
|
+ int Status, nb_trial;
|
|
+
|
|
+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
|
|
+ at91_twi_write(AT91_TWI_IADR, reg_address);
|
|
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
|
|
+
|
|
+ /* Program temporizing period (300us) */
|
|
+ udelay(300);
|
|
+
|
|
+ /* Wait TXcomplete ... */
|
|
+ nb_trial = 0;
|
|
+ Status = at91_twi_read(AT91_TWI_SR);
|
|
+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
|
|
+ nb_trial++;
|
|
+ Status = at91_twi_read(AT91_TWI_SR);
|
|
+ }
|
|
+
|
|
+ if (Status & AT91_TWI_TXCOMP) {
|
|
+ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
|
|
+ return ICS1523_ACCESS_OK;
|
|
+ }
|
|
+ else
|
|
+ return ICS1523_ACCESS_ERROR;
|
|
+}
|
|
+
|
|
+/* -----------------------------------------------------------------------------
|
|
+ * Write a byte with TWI Interface to the Clock Generator ICS1523
|
|
+ * ----------------------------------------------------------------------------- */
|
|
+
|
|
+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
|
|
+{
|
|
+ int Status, nb_trial;
|
|
+
|
|
+ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
|
|
+ at91_twi_write(AT91_TWI_IADR, reg_address);
|
|
+ at91_twi_write(AT91_TWI_THR, data_out);
|
|
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
|
|
+
|
|
+ /* Program temporizing period (300us) */
|
|
+ udelay(300);
|
|
+
|
|
+ nb_trial = 0;
|
|
+ Status = at91_twi_read(AT91_TWI_SR);
|
|
+ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
|
|
+ nb_trial++;
|
|
+ if (Status & AT91_TWI_ERROR) {
|
|
+ /* If Underrun OR NACK - Start again */
|
|
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
|
|
+
|
|
+ /* Program temporizing period (300us) */
|
|
+ udelay(300);
|
|
+ }
|
|
+ Status = at91_twi_read(AT91_TWI_SR);
|
|
+ };
|
|
+
|
|
+ if (Status & AT91_TWI_TXCOMP)
|
|
+ return ICS1523_ACCESS_OK;
|
|
+ else
|
|
+ return ICS1523_ACCESS_ERROR;
|
|
+}
|
|
+
|
|
+/* -----------------------------------------------------------------------------
|
|
+ * Initialization of the Clock Generator ICS1523
|
|
+ * ----------------------------------------------------------------------------- */
|
|
+
|
|
+int at91_ics1523_init(void)
|
|
+{
|
|
+ int nb_trial;
|
|
+ int ack = ICS1523_ACCESS_OK;
|
|
+ unsigned int status = 0xffffffff;
|
|
+ struct clk *twi_clk;
|
|
+
|
|
+ /* Map in TWI peripheral */
|
|
+ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
|
|
+ if (!twi_base)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ /* pins used for TWI interface */
|
|
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
|
|
+ at91_set_multi_drive(AT91_PIN_PA25, 1);
|
|
+ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
|
|
+ at91_set_multi_drive(AT91_PIN_PA26, 1);
|
|
+
|
|
+ /* Enable the TWI clock */
|
|
+ twi_clk = clk_get(NULL, "twi_clk");
|
|
+ if (IS_ERR(twi_clk))
|
|
+ return ICS1523_ACCESS_ERROR;
|
|
+ clk_enable(twi_clk);
|
|
+
|
|
+ /* Disable interrupts */
|
|
+ at91_twi_write(AT91_TWI_IDR, -1);
|
|
+
|
|
+ /* Reset peripheral */
|
|
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
|
|
+
|
|
+ /* Set Master mode */
|
|
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
|
|
+
|
|
+ /* Set TWI Clock Waveform Generator Register */
|
|
+ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */
|
|
+
|
|
+ /* ICS1523 Initialisation */
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
|
|
+
|
|
+ nb_trial = 0;
|
|
+ do {
|
|
+ nb_trial++;
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
|
|
+
|
|
+ /* Program 1ms temporizing period */
|
|
+ mdelay(1);
|
|
+
|
|
+ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
|
|
+ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
|
|
+
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
|
|
+
|
|
+ /* Program 1ms temporizing period */
|
|
+ mdelay(1);
|
|
+
|
|
+ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
|
|
+
|
|
+ /* Program 1ms temporizing period */
|
|
+ mdelay(1);
|
|
+
|
|
+ /* All done - cleanup */
|
|
+ iounmap(twi_base);
|
|
+ clk_disable(twi_clk);
|
|
+ clk_put(twi_clk);
|
|
+
|
|
+ return ack;
|
|
+}
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/leds.c linux-2.6/arch/arm/mach-at91/leds.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/leds.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/leds.c 2008-02-18 22:20:11.000000000 +0200
|
|
@@ -14,11 +14,63 @@
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
-#include <asm/leds.h>
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
|
|
+/* ------------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_NEW_LEDS)
|
|
+
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+/*
|
|
+ * New cross-platform LED support.
|
|
+ */
|
|
+
|
|
+static struct gpio_led_platform_data led_data;
|
|
+
|
|
+static struct platform_device at91_leds = {
|
|
+ .name = "leds-gpio",
|
|
+ .id = -1,
|
|
+ .dev.platform_data = &led_data,
|
|
+};
|
|
+
|
|
+void __init at91_gpio_leds(struct gpio_led *leds, int nr)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ if (!nr)
|
|
+ return;
|
|
+
|
|
+ for (i = 0; i < nr; i++)
|
|
+ at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
|
|
+
|
|
+ led_data.leds = leds;
|
|
+ led_data.num_leds = nr;
|
|
+ platform_device_register(&at91_leds);
|
|
+}
|
|
+
|
|
+#else
|
|
+void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
|
|
+#endif
|
|
+
|
|
+
|
|
+/* ------------------------------------------------------------------------- */
|
|
+
|
|
+#if defined(CONFIG_LEDS)
|
|
+
|
|
+#include <asm/leds.h>
|
|
+
|
|
+/*
|
|
+ * Old ARM-specific LED framework; not fully functional when generic time is
|
|
+ * in use.
|
|
+ */
|
|
+
|
|
+static u8 at91_leds_cpu;
|
|
+static u8 at91_leds_timer;
|
|
+
|
|
+
|
|
static inline void at91_led_on(unsigned int led)
|
|
{
|
|
at91_set_gpio_value(led, 0);
|
|
@@ -93,3 +145,18 @@
|
|
}
|
|
|
|
__initcall(leds_init);
|
|
+
|
|
+
|
|
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
|
|
+{
|
|
+ /* Enable GPIO to access the LEDs */
|
|
+ at91_set_gpio_output(cpu_led, 1);
|
|
+ at91_set_gpio_output(timer_led, 1);
|
|
+
|
|
+ at91_leds_cpu = cpu_led;
|
|
+ at91_leds_timer = timer_led;
|
|
+}
|
|
+
|
|
+#else
|
|
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
|
|
+#endif
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at91/pm.c
|
|
--- linux-2.6.24/arch/arm/mach-at91/pm.c 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/pm.c 2008-03-01 22:05:23.000000000 +0200
|
|
@@ -26,12 +26,140 @@
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/arch/at91_pmc.h>
|
|
-#include <asm/arch/at91rm9200_mc.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/cpu.h>
|
|
|
|
#include "generic.h"
|
|
|
|
+#ifdef CONFIG_ARCH_AT91RM9200
|
|
+#include <asm/arch/at91rm9200_mc.h>
|
|
+
|
|
+/*
|
|
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
|
|
+ * terminate self-refresh automatically on the next SDRAM access.
|
|
+ */
|
|
+#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1)
|
|
+#define sdram_selfrefresh_disable() do {} while (0)
|
|
+
|
|
+#elif defined(CONFIG_ARCH_AT91CAP9)
|
|
+#include <asm/arch/at91cap9_ddrsdr.h>
|
|
+
|
|
+static u32 saved_lpr;
|
|
+
|
|
+static inline void sdram_selfrefresh_enable(void)
|
|
+{
|
|
+ u32 lpr;
|
|
+
|
|
+ saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
|
|
+
|
|
+ lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
|
|
+ at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
|
|
+}
|
|
+
|
|
+#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
|
|
+
|
|
+#else
|
|
+#include <asm/arch/at91sam926x_sdramc.h>
|
|
+
|
|
+static u32 saved_lpr;
|
|
+
|
|
+static inline void sdram_selfrefresh_enable(void)
|
|
+{
|
|
+ u32 lpr;
|
|
+
|
|
+ saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
|
|
+
|
|
+ lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
|
|
+ at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
|
|
+}
|
|
+
|
|
+#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
|
|
+
|
|
+/*
|
|
+ * FIXME: The AT91SAM9263 has a second EBI controller which may have
|
|
+ * additional SDRAM. pm_slowclock.S will require a similar fix.
|
|
+ */
|
|
+
|
|
+#endif
|
|
+
|
|
+
|
|
+#if defined(AT91_SHDWC)
|
|
+
|
|
+#include <asm/arch/at91_rstc.h>
|
|
+#include <asm/arch/at91_shdwc.h>
|
|
+
|
|
+/*
|
|
+ * Show the reason for the previous system reset.
|
|
+ */
|
|
+static void __init show_reset_status(void)
|
|
+{
|
|
+ static char reset[] __initdata = "reset";
|
|
+
|
|
+ static char general[] __initdata = "general";
|
|
+ static char wakeup[] __initdata = "wakeup";
|
|
+ static char watchdog[] __initdata = "watchdog";
|
|
+ static char software[] __initdata = "software";
|
|
+ static char user[] __initdata = "user";
|
|
+ static char unknown[] __initdata = "unknown";
|
|
+
|
|
+ static char signal[] __initdata = "signal";
|
|
+ static char rtc[] __initdata = "rtc";
|
|
+ static char rtt[] __initdata = "rtt";
|
|
+ static char restore[] __initdata = "power-restored";
|
|
+
|
|
+ char *reason, *r2 = reset;
|
|
+ u32 reset_type, wake_type;
|
|
+
|
|
+ reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
|
|
+ wake_type = at91_sys_read(AT91_SHDW_SR);
|
|
+
|
|
+ switch (reset_type) {
|
|
+ case AT91_RSTC_RSTTYP_GENERAL:
|
|
+ reason = general;
|
|
+ break;
|
|
+ case AT91_RSTC_RSTTYP_WAKEUP:
|
|
+ /* board-specific code enabled the wakeup sources */
|
|
+ reason = wakeup;
|
|
+
|
|
+ /* "wakeup signal" */
|
|
+ if (wake_type & AT91_SHDW_WAKEUP0)
|
|
+ r2 = signal;
|
|
+ else {
|
|
+ r2 = reason;
|
|
+ if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */
|
|
+ reason = rtt;
|
|
+ else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */
|
|
+ reason = rtc;
|
|
+ else if (wake_type == 0) /* power-restored wakeup */
|
|
+ reason = restore;
|
|
+ else /* unknown wakeup */
|
|
+ reason = unknown;
|
|
+ }
|
|
+ break;
|
|
+ case AT91_RSTC_RSTTYP_WATCHDOG:
|
|
+ reason = watchdog;
|
|
+ break;
|
|
+ case AT91_RSTC_RSTTYP_SOFTWARE:
|
|
+ reason = software;
|
|
+ break;
|
|
+ case AT91_RSTC_RSTTYP_USER:
|
|
+ reason = user;
|
|
+ break;
|
|
+ default:
|
|
+ reason = unknown;
|
|
+ break;
|
|
+ }
|
|
+ pr_info("AT91: Starting after %s %s\n", reason, r2);
|
|
+}
|
|
+#else
|
|
+static void __init show_reset_status(void) {}
|
|
+#endif
|
|
+
|
|
+#ifdef CONFIG_AT91_SLOW_CLOCK
|
|
+extern void at91_slow_clock(void);
|
|
+extern u32 at91_slow_clock_sz;
|
|
+#endif
|
|
+
|
|
|
|
static int at91_pm_valid_state(suspend_state_t state)
|
|
{
|
|
@@ -62,6 +190,7 @@
|
|
* Verify that all the clocks are correct before entering
|
|
* slow-clock mode.
|
|
*/
|
|
+#warning "This should probably be moved to clocks.c"
|
|
static int at91_pm_verify_clocks(void)
|
|
{
|
|
unsigned long scsr;
|
|
@@ -80,6 +209,11 @@
|
|
pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
|
|
return 0;
|
|
}
|
|
+ } else if (cpu_is_at91cap9()) {
|
|
+ if ((scsr & AT91CAP9_PMC_UHP) != 0) {
|
|
+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
|
|
+ return 0;
|
|
+ }
|
|
}
|
|
|
|
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
|
|
@@ -102,20 +236,15 @@
|
|
}
|
|
|
|
/*
|
|
- * Call this from platform driver suspend() to see how deeply to suspend.
|
|
+ * This is called from clk_must_disable(), to see how deeply to suspend.
|
|
* For example, some controllers (like OHCI) need one of the PLL clocks
|
|
* in order to act as a wakeup source, and those are not available when
|
|
* going into slow clock mode.
|
|
- *
|
|
- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
|
|
- * the very same problem (but not using at91 main_clk), and it'd be better
|
|
- * to add one generic API rather than lots of platform-specific ones.
|
|
*/
|
|
int at91_suspend_entering_slow_clock(void)
|
|
{
|
|
return (target_state == PM_SUSPEND_MEM);
|
|
}
|
|
-EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
|
|
|
|
|
|
static void (*slow_clock)(void);
|
|
@@ -153,11 +282,12 @@
|
|
* turning off the main oscillator; reverse on wakeup.
|
|
*/
|
|
if (slow_clock) {
|
|
+ /* copy slow_clock handler to SRAM, and call it */
|
|
+ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
|
|
slow_clock();
|
|
break;
|
|
} else {
|
|
- /* DEVELOPMENT ONLY */
|
|
- pr_info("AT91: PM - no slow clock mode yet ...\n");
|
|
+ pr_info("AT91: PM - no slow clock mode enabled ...\n");
|
|
/* FALLTHROUGH leaving master clock alone */
|
|
}
|
|
|
|
@@ -170,13 +300,15 @@
|
|
case PM_SUSPEND_STANDBY:
|
|
/*
|
|
* NOTE: the Wait-for-Interrupt instruction needs to be
|
|
- * in icache so the SDRAM stays in self-refresh mode until
|
|
- * the wakeup IRQ occurs.
|
|
+ * in icache so no SDRAM accesses are needed until the
|
|
+ * wakeup IRQ occurs and self-refresh is terminated.
|
|
*/
|
|
asm("b 1f; .align 5; 1:");
|
|
asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
|
|
- at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */
|
|
- /* fall though to next state */
|
|
+ sdram_selfrefresh_enable();
|
|
+ asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
|
|
+ sdram_selfrefresh_disable();
|
|
+ break;
|
|
|
|
case PM_SUSPEND_ON:
|
|
asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
|
|
@@ -191,6 +323,7 @@
|
|
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
|
|
|
|
error:
|
|
+ sdram_selfrefresh_disable();
|
|
target_state = PM_SUSPEND_ON;
|
|
at91_irq_resume();
|
|
at91_gpio_resume();
|
|
@@ -204,23 +337,24 @@
|
|
.enter = at91_pm_enter,
|
|
};
|
|
|
|
+
|
|
static int __init at91_pm_init(void)
|
|
{
|
|
- printk("AT91: Power Management\n");
|
|
-
|
|
-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
|
|
- /* REVISIT allocations of SRAM should be dynamically managed.
|
|
- * FIQ handlers and other components will want SRAM/TCM too...
|
|
- */
|
|
- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
|
|
- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
|
|
+#ifdef CONFIG_AT91_SLOW_CLOCK
|
|
+ slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
|
|
+ pr_info("AT91: Power Management (with slow clock mode)\n");
|
|
+#else
|
|
+ pr_info("AT91: Power Management\n");
|
|
#endif
|
|
|
|
- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
|
|
+#ifdef CONFIG_ARCH_AT91RM9200
|
|
+ /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
|
|
at91_sys_write(AT91_SDRAMC_LPR, 0);
|
|
+#endif
|
|
|
|
suspend_set_ops(&at91_pm_ops);
|
|
|
|
+ show_reset_status();
|
|
return 0;
|
|
}
|
|
arch_initcall(at91_pm_init);
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/pm_slowclock.S linux-2.6/arch/arm/mach-at91/pm_slowclock.S
|
|
--- linux-2.6.24/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mach-at91/pm_slowclock.S 2008-03-01 21:38:50.000000000 +0200
|
|
@@ -0,0 +1,273 @@
|
|
+/*
|
|
+ * arch/arm/mach-at91/pm_slow_clock.S
|
|
+ *
|
|
+ * Copyright (C) 2006 Savin Zlobec
|
|
+ *
|
|
+ * AT91SAM9 support:
|
|
+ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/linkage.h>
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/arch/at91_pmc.h>
|
|
+
|
|
+#ifdef CONFIG_ARCH_AT91RM9200
|
|
+#include <asm/arch/at91rm9200_mc.h>
|
|
+#elif defined(CONFIG_ARCH_AT91CAP9)
|
|
+#include <asm/arch/at91cap9_ddrsdr.h>
|
|
+#else
|
|
+#include <asm/arch/at91sam926x_sdramc.h>
|
|
+#endif
|
|
+
|
|
+/*
|
|
+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
|
|
+ * clock during suspend by adjusting its prescalar and divisor.
|
|
+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
|
|
+ * are errata regarding adjusting the prescalar and divisor.
|
|
+ */
|
|
+#undef SLOWDOWN_MASTER_CLOCK
|
|
+
|
|
+#define MCKRDY_TIMEOUT 1000
|
|
+#define MOSCRDY_TIMEOUT 1000
|
|
+#define PLLALOCK_TIMEOUT 1000
|
|
+#define PLLBLOCK_TIMEOUT 1000
|
|
+
|
|
+
|
|
+/*
|
|
+ * Wait until master clock is ready (after switching master clock source)
|
|
+ */
|
|
+ .macro wait_mckrdy
|
|
+ mov r4, #MCKRDY_TIMEOUT
|
|
+1: sub r4, r4, #1
|
|
+ cmp r4, #0
|
|
+ beq 2f
|
|
+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
|
|
+ tst r3, #AT91_PMC_MCKRDY
|
|
+ beq 1b
|
|
+2:
|
|
+ .endm
|
|
+
|
|
+/*
|
|
+ * Wait until master oscillator has stabilized.
|
|
+ */
|
|
+ .macro wait_moscrdy
|
|
+ mov r4, #MOSCRDY_TIMEOUT
|
|
+1: sub r4, r4, #1
|
|
+ cmp r4, #0
|
|
+ beq 2f
|
|
+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
|
|
+ tst r3, #AT91_PMC_MOSCS
|
|
+ beq 1b
|
|
+2:
|
|
+ .endm
|
|
+
|
|
+/*
|
|
+ * Wait until PLLA has locked.
|
|
+ */
|
|
+ .macro wait_pllalock
|
|
+ mov r4, #PLLALOCK_TIMEOUT
|
|
+1: sub r4, r4, #1
|
|
+ cmp r4, #0
|
|
+ beq 2f
|
|
+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
|
|
+ tst r3, #AT91_PMC_LOCKA
|
|
+ beq 1b
|
|
+2:
|
|
+ .endm
|
|
+
|
|
+/*
|
|
+ * Wait until PLLB has locked.
|
|
+ */
|
|
+ .macro wait_pllblock
|
|
+ mov r4, #PLLBLOCK_TIMEOUT
|
|
+1: sub r4, r4, #1
|
|
+ cmp r4, #0
|
|
+ beq 2f
|
|
+ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
|
|
+ tst r3, #AT91_PMC_LOCKB
|
|
+ beq 1b
|
|
+2:
|
|
+ .endm
|
|
+
|
|
+ .text
|
|
+
|
|
+ENTRY(at91_slow_clock)
|
|
+ /* Save registers on stack */
|
|
+ stmfd sp!, {r0 - r12, lr}
|
|
+
|
|
+ /*
|
|
+ * Register usage:
|
|
+ * R1 = Base address of AT91_PMC
|
|
+ * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
|
|
+ * R3 = temporary register
|
|
+ * R4 = temporary register
|
|
+ */
|
|
+ ldr r1, .at91_va_base_pmc
|
|
+ ldr r2, .at91_va_base_sdramc
|
|
+
|
|
+ /* Drain write buffer */
|
|
+ mcr p15, 0, r0, c7, c10, 4
|
|
+
|
|
+#ifdef CONFIG_ARCH_AT91RM9200
|
|
+ /* Put SDRAM in self-refresh mode */
|
|
+ mov r3, #1
|
|
+ str r3, [r2, #AT91_SDRAMC_SRR]
|
|
+#elif defined(CONFIG_ARCH_AT91CAP9)
|
|
+ /* Enable SDRAM self-refresh mode */
|
|
+ ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
|
|
+ str r3, .saved_sam9_lpr
|
|
+
|
|
+ mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
|
|
+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
|
|
+#else
|
|
+ /* Enable SDRAM self-refresh mode */
|
|
+ ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
|
|
+ str r3, .saved_sam9_lpr
|
|
+
|
|
+ mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
|
|
+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
|
|
+#endif
|
|
+
|
|
+ /* Save Master clock setting */
|
|
+ ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
+ str r3, .saved_mckr
|
|
+
|
|
+ /*
|
|
+ * Set the Master clock source to slow clock
|
|
+ */
|
|
+ bic r3, r3, #AT91_PMC_CSS
|
|
+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
+
|
|
+ wait_mckrdy
|
|
+
|
|
+#ifdef SLOWDOWN_MASTER_CLOCK
|
|
+ /*
|
|
+ * Set the Master Clock PRES and MDIV fields.
|
|
+ *
|
|
+ * See AT91RM9200 errata #27 and #28 for details.
|
|
+ */
|
|
+ mov r3, #0
|
|
+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
+
|
|
+ wait_mckrdy
|
|
+#endif
|
|
+
|
|
+ /* Save PLLA setting and disable it */
|
|
+ ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
|
|
+ str r3, .saved_pllar
|
|
+
|
|
+ mov r3, #AT91_PMC_PLLCOUNT
|
|
+ orr r3, r3, #(1 << 29) /* bit 29 always set */
|
|
+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
|
|
+
|
|
+ wait_pllalock
|
|
+
|
|
+ /* Save PLLB setting and disable it */
|
|
+ ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
|
|
+ str r3, .saved_pllbr
|
|
+
|
|
+ mov r3, #AT91_PMC_PLLCOUNT
|
|
+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
|
|
+
|
|
+ wait_pllblock
|
|
+
|
|
+ /* Turn off the main oscillator */
|
|
+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
|
|
+ bic r3, r3, #AT91_PMC_MOSCEN
|
|
+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
|
|
+
|
|
+ /* Wait for interrupt */
|
|
+ mcr p15, 0, r0, c7, c0, 4
|
|
+
|
|
+ /* Turn on the main oscillator */
|
|
+ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
|
|
+ orr r3, r3, #AT91_PMC_MOSCEN
|
|
+ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
|
|
+
|
|
+ wait_moscrdy
|
|
+
|
|
+ /* Restore PLLB setting */
|
|
+ ldr r3, .saved_pllbr
|
|
+ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
|
|
+
|
|
+ wait_pllblock
|
|
+
|
|
+ /* Restore PLLA setting */
|
|
+ ldr r3, .saved_pllar
|
|
+ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
|
|
+
|
|
+ wait_pllalock
|
|
+
|
|
+#ifdef SLOWDOWN_MASTER_CLOCK
|
|
+ /*
|
|
+ * First set PRES if it was not 0,
|
|
+ * than set CSS and MDIV fields.
|
|
+ *
|
|
+ * See AT91RM9200 errata #27 and #28 for details.
|
|
+ */
|
|
+ ldr r3, .saved_mckr
|
|
+ tst r3, #AT91_PMC_PRES
|
|
+ beq 2f
|
|
+ and r3, r3, #AT91_PMC_PRES
|
|
+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
+
|
|
+ wait_mckrdy
|
|
+#endif
|
|
+
|
|
+ /*
|
|
+ * Restore master clock setting
|
|
+ */
|
|
+2: ldr r3, .saved_mckr
|
|
+ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
|
|
+
|
|
+ wait_mckrdy
|
|
+
|
|
+#ifdef CONFIG_ARCH_AT91RM9200
|
|
+ /* Do nothing - self-refresh is automatically disabled. */
|
|
+#elif defined(CONFIG_ARCH_AT91CAP9)
|
|
+ /* Restore LPR on AT91CAP9 */
|
|
+ ldr r3, .saved_sam9_lpr
|
|
+ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
|
|
+#else
|
|
+ /* Restore LPR on AT91SAM9 */
|
|
+ ldr r3, .saved_sam9_lpr
|
|
+ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
|
|
+#endif
|
|
+
|
|
+ /* Restore registers, and return */
|
|
+ ldmfd sp!, {r0 - r12, pc}
|
|
+
|
|
+
|
|
+.saved_mckr:
|
|
+ .word 0
|
|
+
|
|
+.saved_pllar:
|
|
+ .word 0
|
|
+
|
|
+.saved_pllbr:
|
|
+ .word 0
|
|
+
|
|
+.saved_sam9_lpr:
|
|
+ .word 0
|
|
+
|
|
+.at91_va_base_pmc:
|
|
+ .word AT91_VA_BASE_SYS + AT91_PMC
|
|
+
|
|
+#ifdef CONFIG_ARCH_AT91RM9200
|
|
+.at91_va_base_sdramc:
|
|
+ .word AT91_VA_BASE_SYS
|
|
+#elif defined(CONFIG_ARCH_AT91CAP9)
|
|
+.at91_va_base_sdramc:
|
|
+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC
|
|
+#else
|
|
+.at91_va_base_sdramc:
|
|
+ .word AT91_VA_BASE_SYS + AT91_SDRAMC
|
|
+#endif
|
|
+
|
|
+ENTRY(at91_slow_clock_sz)
|
|
+ .word .-at91_slow_clock
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/mm/Kconfig linux-2.6/arch/arm/mm/Kconfig
|
|
--- linux-2.6.24/arch/arm/mm/Kconfig 2008-03-01 22:02:07.000000000 +0200
|
|
+++ linux-2.6/arch/arm/mm/Kconfig 2008-01-16 20:26:55.000000000 +0200
|
|
@@ -171,8 +171,8 @@
|
|
# ARM926T
|
|
config CPU_ARM926T
|
|
bool "Support ARM926T processor"
|
|
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
|
|
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
|
|
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
|
|
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5TJ
|
|
select CPU_CACHE_VIVT
|
|
diff -urN -x CVS linux-2.6.24/arch/arm/tools/mach-types linux-2.6/arch/arm/tools/mach-types
|
|
--- linux-2.6.24/arch/arm/tools/mach-types 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/arch/arm/tools/mach-types 2008-01-16 21:25:12.000000000 +0200
|
|
@@ -12,7 +12,7 @@
|
|
#
|
|
# http://www.arm.linux.org.uk/developer/machines/?action=new
|
|
#
|
|
-# Last update: Fri May 11 19:53:41 2007
|
|
+# Last update: Mon Nov 12 14:39:37 2007
|
|
#
|
|
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
|
|
#
|
|
@@ -266,7 +266,7 @@
|
|
wismo SA1100_WISMO WISMO 249
|
|
ezlinx ARCH_EZLINX EZLINX 250
|
|
at91rm9200 ARCH_AT91RM9200 AT91RM9200 251
|
|
-orion ARCH_ORION ORION 252
|
|
+adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252
|
|
neptune ARCH_NEPTUNE NEPTUNE 253
|
|
hackkit SA1100_HACKKIT HACKKIT 254
|
|
pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255
|
|
@@ -661,7 +661,7 @@
|
|
pnx0105 MACH_PNX0105 PNX0105 646
|
|
adcpoecpu MACH_ADCPOECPU ADCPOECPU 647
|
|
csb637 MACH_CSB637 CSB637 648
|
|
-ml69q6203 MACH_ML69Q6203 ML69Q6203 649
|
|
+ml675050 MACH_ML69Q6203 ML69Q6203 649
|
|
mb9200 MACH_MB9200 MB9200 650
|
|
kulun MACH_KULUN KULUN 651
|
|
snapper MACH_SNAPPER SNAPPER 652
|
|
@@ -953,7 +953,7 @@
|
|
ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940
|
|
nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941
|
|
netdcu8 MACH_NETDCU8 NETDCU8 942
|
|
-ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
|
|
+ml675050_dev_sys MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
|
|
ng_fvx538 MACH_NG_FVX538 NG_FVX538 944
|
|
ng_fvs338 MACH_NG_FVS338 NG_FVS338 945
|
|
pnx4103 MACH_PNX4103 PNX4103 946
|
|
@@ -1148,7 +1148,7 @@
|
|
rema MACH_REMA REMA 1135
|
|
bps1000 MACH_BPS1000 BPS1000 1136
|
|
hw90350 MACH_HW90350 HW90350 1137
|
|
-omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138
|
|
+omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138
|
|
bluetouch MACH_BLUETOUCH BLUETOUCH 1139
|
|
vstms MACH_VSTMS VSTMS 1140
|
|
xsbase270 MACH_XSBASE270 XSBASE270 1141
|
|
@@ -1214,7 +1214,7 @@
|
|
kbat9261 MACH_KBAT9261 KBAT9261 1204
|
|
ct1100 MACH_CT1100 CT1100 1205
|
|
akcppxa MACH_AKCPPXA AKCPPXA 1206
|
|
-zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207
|
|
+ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207
|
|
hitrack MACH_HITRACK HITRACK 1208
|
|
syme1 MACH_SYME1 SYME1 1209
|
|
syhl1 MACH_SYHL1 SYHL1 1210
|
|
@@ -1299,7 +1299,7 @@
|
|
h4300 MACH_H4300 H4300 1291
|
|
goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292
|
|
mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293
|
|
-adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294
|
|
+adsbitsyg5 MACH_ADSBITSIMX ADSBITSIMX 1294
|
|
adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295
|
|
mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296
|
|
em_x270 MACH_EM_X270 EM_X270 1297
|
|
@@ -1367,3 +1367,190 @@
|
|
csb726 MACH_CSB726 CSB726 1359
|
|
tik27 MACH_TIK27 TIK27 1360
|
|
mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
|
|
+rirm3 MACH_RIRM3 RIRM3 1362
|
|
+pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363
|
|
+arm920t MACH_ARM920T ARM920T 1364
|
|
+add_abox MACH_ADD_ABOX ADD_ABOX 1365
|
|
+add_tpid MACH_ADD_TPID ADD_TPID 1366
|
|
+minicheck MACH_MINICHECK MINICHECK 1367
|
|
+idam MACH_IDAM IDAM 1368
|
|
+mario_mx MACH_MARIO_MX MARIO_MX 1369
|
|
+vi1888 MACH_VI1888 VI1888 1370
|
|
+zr4230 MACH_ZR4230 ZR4230 1371
|
|
+t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372
|
|
+syhq2 MACH_SYHQ2 SYHQ2 1373
|
|
+computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374
|
|
+oratis MACH_ORATIS ORATIS 1375
|
|
+mikko MACH_MIKKO MIKKO 1376
|
|
+holon MACH_HOLON HOLON 1377
|
|
+olip8 MACH_OLIP8 OLIP8 1378
|
|
+ghi270hg MACH_GHI270HG GHI270HG 1379
|
|
+davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380
|
|
+davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381
|
|
+ocearm MACH_OCEARMTEST OCEARMTEST 1382
|
|
+blackriver MACH_BLACKRIVER BLACKRIVER 1383
|
|
+sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384
|
|
+cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385
|
|
+quark963 MACH_QUARK963 QUARK963 1386
|
|
+csb735 MACH_CSB735 CSB735 1387
|
|
+littleton MACH_LITTLETON LITTLETON 1388
|
|
+mio_p550 MACH_MIO_P550 MIO_P550 1389
|
|
+motion2440 MACH_MOTION2440 MOTION2440 1390
|
|
+imm500 MACH_IMM500 IMM500 1391
|
|
+homematic MACH_HOMEMATIC HOMEMATIC 1392
|
|
+ermine MACH_ERMINE ERMINE 1393
|
|
+kb9202b MACH_KB9202B KB9202B 1394
|
|
+hs1xx MACH_HS1XX HS1XX 1395
|
|
+studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396
|
|
+arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397
|
|
+dep2410k MACH_DEP2410K DEP2410K 1398
|
|
+xxsvideo MACH_XXSVIDEO XXSVIDEO 1399
|
|
+im4004 MACH_IM4004 IM4004 1400
|
|
+ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401
|
|
+lep9261 MACH_LEP9261 LEP9261 1402
|
|
+svenmeb MACH_SVENMEB SVENMEB 1403
|
|
+fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404
|
|
+omap2 MACH_OMAP2 OMAP2 1405
|
|
+nxhx MACH_NXHX NXHX 1406
|
|
+realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407
|
|
+ids500 MACH_IDS500 IDS500 1408
|
|
+ors_n725 MACH_ORS_N725 ORS_N725 1409
|
|
+hsdarm MACH_HSDARM HSDARM 1410
|
|
+sha_pon003 MACH_SHA_PON003 SHA_PON003 1411
|
|
+sha_pon004 MACH_SHA_PON004 SHA_PON004 1412
|
|
+sha_pon007 MACH_SHA_PON007 SHA_PON007 1413
|
|
+sha_pon011 MACH_SHA_PON011 SHA_PON011 1414
|
|
+h6042 MACH_H6042 H6042 1415
|
|
+h6043 MACH_H6043 H6043 1416
|
|
+looxc550 MACH_LOOXC550 LOOXC550 1417
|
|
+cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
|
|
+app3xx MACH_APP3XX APP3XX 1419
|
|
+sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
|
|
+xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421
|
|
+xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422
|
|
+xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423
|
|
+xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424
|
|
+ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
|
|
+sarge MACH_SARGE SARGE 1426
|
|
+a696 MACH_A696 A696 1427
|
|
+turtle1916 MACH_TURTLE TURTLE 1428
|
|
+pxa1916 MACH_MY5910TURTLE MY5910TURTLE 1429
|
|
+mx27_3ds MACH_MX27_3DS MX27_3DS 1430
|
|
+bishop MACH_BISHOP BISHOP 1431
|
|
+pxx MACH_PXX PXX 1432
|
|
+redwood MACH_REDWOOD REDWOOD 1433
|
|
+dummy MACH_OMAP2430DLP OMAP2430DLP 1434
|
|
+dummy_board MACH_OMAP2430OSK OMAP2430OSK 1435
|
|
+omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436
|
|
+omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437
|
|
+sardine MACH_SARDINE SARDINE 1438
|
|
+halibut MACH_HALIBUT HALIBUT 1439
|
|
+trout MACH_TROUT TROUT 1440
|
|
+goldfish MACH_GOLDFISH GOLDFISH 1441
|
|
+gesbc2440 MACH_GESBC2440 GESBC2440 1442
|
|
+nomad MACH_NOMAD NOMAD 1443
|
|
+rosalind MACH_ROSALIND ROSALIND 1444
|
|
+cc9p9215 MACH_CC9P9215 CC9P9215 1445
|
|
+cc9p9210 MACH_CC9P9210 CC9P9210 1446
|
|
+cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447
|
|
+cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448
|
|
+nasffe MACH_NASFFE NASFFE 1449
|
|
+tn2x0bd MACH_TN2X0BD TN2X0BD 1450
|
|
+gwmpxa MACH_GWMPXA GWMPXA 1451
|
|
+exyplus MACH_EXYPLUS EXYPLUS 1452
|
|
+jadoo21 MACH_JADOO21 JADOO21 1453
|
|
+looxn560 MACH_LOOXN560 LOOXN560 1454
|
|
+bonsai MACH_BONSAI BONSAI 1455
|
|
+adsmilgato MACH_ADSMILGATO ADSMILGATO 1456
|
|
+gba MACH_GBA GBA 1457
|
|
+h6044 MACH_H6044 H6044 1458
|
|
+app MACH_APP APP 1459
|
|
+tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460
|
|
+herald MACH_HERMES HERMES 1461
|
|
+artemis MACH_ARTEMIS ARTEMIS 1462
|
|
+htctitan MACH_HTCTITAN HTCTITAN 1463
|
|
+qranium MACH_QRANIUM QRANIUM 1464
|
|
+add_wsc2 MACH_ADD_WSC2 ADD_WSC2 1465
|
|
+add_medinet MACH_ADD_MEDINET ADD_MEDINET 1466
|
|
+bboard MACH_BBOARD BBOARD 1467
|
|
+cambria MACH_CAMBRIA CAMBRIA 1468
|
|
+mt7xxx MACH_MT7XXX MT7XXX 1469
|
|
+matrix512 MACH_MATRIX512 MATRIX512 1470
|
|
+matrix522 MACH_MATRIX522 MATRIX522 1471
|
|
+ipac5010 MACH_IPAC5010 IPAC5010 1472
|
|
+sakura MACH_SAKURA SAKURA 1473
|
|
+grocx MACH_GROCX GROCX 1474
|
|
+pm9263 MACH_PM9263 PM9263 1475
|
|
+sim_one MACH_SIM_ONE SIM_ONE 1476
|
|
+acq132 MACH_ACQ132 ACQ132 1477
|
|
+datr MACH_DATR DATR 1478
|
|
+actux1 MACH_ACTUX1 ACTUX1 1479
|
|
+actux2 MACH_ACTUX2 ACTUX2 1480
|
|
+actux3 MACH_ACTUX3 ACTUX3 1481
|
|
+flexit MACH_FLEXIT FLEXIT 1482
|
|
+bh2x0bd MACH_BH2X0BD BH2X0BD 1483
|
|
+atb2002 MACH_ATB2002 ATB2002 1484
|
|
+xenon MACH_XENON XENON 1485
|
|
+fm607 MACH_FM607 FM607 1486
|
|
+matrix514 MACH_MATRIX514 MATRIX514 1487
|
|
+matrix524 MACH_MATRIX524 MATRIX524 1488
|
|
+inpod MACH_INPOD INPOD 1489
|
|
+jive MACH_JIVE JIVE 1490
|
|
+tll_mx21 MACH_TLL_MX21 TLL_MX21 1491
|
|
+sbc2800 MACH_SBC2800 SBC2800 1492
|
|
+cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493
|
|
+ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494
|
|
+ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495
|
|
+ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496
|
|
+aml_m8000 MACH_AML_M8000 AML_M8000 1497
|
|
+snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498
|
|
+omap_bbx MACH_OMAP_BBX OMAP_BBX 1499
|
|
+ucn2410 MACH_UCN2410 UCN2410 1500
|
|
+sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501
|
|
+eti_c2 MACH_ETI_C2 ETI_C2 1502
|
|
+avalanche MACH_AVALANCHE AVALANCHE 1503
|
|
+realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504
|
|
+dp1500 MACH_DP1500 DP1500 1505
|
|
+apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506
|
|
+yl9200 MACH_YL9200 YL9200 1507
|
|
+rd88f5182 MACH_RD88F5182 RD88F5182 1508
|
|
+kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509
|
|
+se_poet MACH_SE_POET SE_POET 1510
|
|
+mx31_3ds MACH_MX31_3DS MX31_3DS 1511
|
|
+r270 MACH_R270 R270 1512
|
|
+armour21 MACH_ARMOUR21 ARMOUR21 1513
|
|
+dt2 MACH_DT2 DT2 1514
|
|
+vt4 MACH_VT4 VT4 1515
|
|
+tyco320 MACH_TYCO320 TYCO320 1516
|
|
+adma MACH_ADMA ADMA 1517
|
|
+wp188 MACH_WP188 WP188 1518
|
|
+corsica MACH_CORSICA CORSICA 1519
|
|
+bigeye MACH_BIGEYE BIGEYE 1520
|
|
+machine_is_arm2410 MACH_MACHINE_IS_ARM2410 MACHINE_IS_ARM2410 1521
|
|
+tll5000 MACH_TLL5000 TLL5000 1522
|
|
+hni270 MACH_HNI_X270 HNI_X270 1523
|
|
+qong MACH_QONG QONG 1524
|
|
+tcompact MACH_TCOMPACT TCOMPACT 1525
|
|
+puma5 MACH_PUMA5 PUMA5 1526
|
|
+elara MACH_ELARA ELARA 1527
|
|
+ellington MACH_ELLINGTON ELLINGTON 1528
|
|
+xda_atom MACH_XDA_ATOM XDA_ATOM 1529
|
|
+energizer2 MACH_ENERGIZER2 ENERGIZER2 1530
|
|
+odin MACH_ODIN ODIN 1531
|
|
+actux4 MACH_ACTUX4 ACTUX4 1532
|
|
+esl_omap MACH_ESL_OMAP ESL_OMAP 1533
|
|
+omap2evm MACH_OMAP2EVM OMAP2EVM 1534
|
|
+omap3evm MACH_OMAP3EVM OMAP3EVM 1535
|
|
+add_pcu57 MACH_ADD_PCU57 ADD_PCU57 1536
|
|
+monaco MACH_MONACO MONACO 1537
|
|
+levante MACH_LEVANTE LEVANTE 1538
|
|
+tmxipx425 MACH_TMXIPX425 TMXIPX425 1539
|
|
+leep MACH_LEEP LEEP 1540
|
|
+raad MACH_RAAD RAAD 1541
|
|
+dns323 MACH_DNS323 DNS323 1542
|
|
+ap1000 MACH_AP1000 AP1000 1543
|
|
+a9sam6432 MACH_A9SAM6432 A9SAM6432 1544
|
|
+shiny MACH_SHINY SHINY 1545
|
|
+omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546
|
|
+csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547
|
|
+at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566
|
|
diff -urN -x CVS linux-2.6.24/drivers/char/Kconfig linux-2.6/drivers/char/Kconfig
|
|
--- linux-2.6.24/drivers/char/Kconfig 2008-03-01 22:02:10.000000000 +0200
|
|
+++ linux-2.6/drivers/char/Kconfig 2008-02-18 22:56:04.000000000 +0200
|
|
@@ -1040,5 +1040,21 @@
|
|
|
|
source "drivers/s390/char/Kconfig"
|
|
|
|
+config AT91_SPI
|
|
+ bool "SPI driver (legacy) for AT91RM9200 processors"
|
|
+ depends on ARCH_AT91RM9200
|
|
+ default y
|
|
+ help
|
|
+ The SPI driver gives access to this serial bus on the AT91RM9200
|
|
+ processor.
|
|
+
|
|
+config AT91_SPIDEV
|
|
+ bool "SPI device interface (legacy) for AT91RM9200 processors"
|
|
+ depends on ARCH_AT91RM9200 && AT91_SPI
|
|
+ default n
|
|
+ help
|
|
+ The SPI driver gives user mode access to this serial
|
|
+ bus on the AT91RM9200 processor.
|
|
+
|
|
endmenu
|
|
|
|
diff -urN -x CVS linux-2.6.24/drivers/char/Makefile linux-2.6/drivers/char/Makefile
|
|
--- linux-2.6.24/drivers/char/Makefile 2008-03-01 22:02:10.000000000 +0200
|
|
+++ linux-2.6/drivers/char/Makefile 2007-12-31 10:43:55.000000000 +0200
|
|
@@ -96,6 +96,8 @@
|
|
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
|
|
obj-$(CONFIG_GPIO_TB0219) += tb0219.o
|
|
obj-$(CONFIG_TELCLOCK) += tlclk.o
|
|
+obj-$(CONFIG_AT91_SPI) += at91_spi.o
|
|
+obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
|
|
|
|
obj-$(CONFIG_MWAVE) += mwave/
|
|
obj-$(CONFIG_AGP) += agp/
|
|
diff -urN -x CVS linux-2.6.24/drivers/char/at91_spi.c linux-2.6/drivers/char/at91_spi.c
|
|
--- linux-2.6.24/drivers/char/at91_spi.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/drivers/char/at91_spi.c 2007-12-31 15:18:43.000000000 +0200
|
|
@@ -0,0 +1,336 @@
|
|
+/*
|
|
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
|
|
+ *
|
|
+ * Copyright (C) SAN People (Pty) Ltd
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version
|
|
+ * 2 of the License, or (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/completion.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/atmel_pdc.h>
|
|
+#include <asm/io.h>
|
|
+#include <asm/semaphore.h>
|
|
+
|
|
+#include <asm/arch/at91_spi.h>
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/spi.h>
|
|
+
|
|
+#undef DEBUG_SPI
|
|
+
|
|
+static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */
|
|
+static int spi_enabled = 0;
|
|
+static struct semaphore spi_lock; /* protect access to SPI bus */
|
|
+static int current_device = -1; /* currently selected SPI device */
|
|
+static struct clk *spi_clk; /* SPI clock */
|
|
+static void __iomem *spi_base; /* SPI peripheral base-address */
|
|
+
|
|
+DECLARE_COMPLETION(transfer_complete);
|
|
+
|
|
+
|
|
+#define at91_spi_read(reg) __raw_readl(spi_base + (reg))
|
|
+#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg))
|
|
+
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/*
|
|
+ * Access and enable the SPI bus.
|
|
+ * This MUST be called before any transfers are performed.
|
|
+ */
|
|
+void spi_access_bus(short device)
|
|
+{
|
|
+ /* Ensure that requested device is valid */
|
|
+ if ((device < 0) || (device >= NR_SPI_DEVICES))
|
|
+ panic("at91_spi: spi_access_bus called with invalid device");
|
|
+
|
|
+ if (spi_enabled == 0) {
|
|
+ clk_enable(spi_clk); /* Enable Peripheral clock */
|
|
+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
|
|
+#ifdef DEBUG_SPI
|
|
+ printk("SPI on\n");
|
|
+#endif
|
|
+ }
|
|
+ spi_enabled++;
|
|
+
|
|
+ /* Lock the SPI bus */
|
|
+ down(&spi_lock);
|
|
+ current_device = device;
|
|
+
|
|
+ /* Configure SPI bus for device */
|
|
+ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Relinquish control of the SPI bus.
|
|
+ */
|
|
+void spi_release_bus(short device)
|
|
+{
|
|
+ if (device != current_device)
|
|
+ panic("at91_spi: spi_release called with invalid device");
|
|
+
|
|
+ /* Release the SPI bus */
|
|
+ current_device = -1;
|
|
+ up(&spi_lock);
|
|
+
|
|
+ spi_enabled--;
|
|
+ if (spi_enabled == 0) {
|
|
+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
|
|
+ clk_disable(spi_clk); /* Disable Peripheral clock */
|
|
+#ifdef DEBUG_SPI
|
|
+ printk("SPI off\n");
|
|
+#endif
|
|
+ }
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Perform a data transfer over the SPI bus
|
|
+ */
|
|
+int spi_transfer(struct spi_transfer_list* list)
|
|
+{
|
|
+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
|
|
+ int tx_size;
|
|
+
|
|
+ if (!list)
|
|
+ panic("at91_spi: spi_transfer called with NULL transfer list");
|
|
+ if (current_device == -1)
|
|
+ panic("at91_spi: spi_transfer called without acquiring bus");
|
|
+
|
|
+#ifdef DEBUG_SPI
|
|
+ printk("SPI transfer start [%i]\n", list->nr_transfers);
|
|
+#endif
|
|
+
|
|
+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
|
|
+ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
|
|
+
|
|
+ /* Store transfer list */
|
|
+ device->xfers = list;
|
|
+ list->curr = 0;
|
|
+
|
|
+ /* Assume there must be at least one transfer */
|
|
+ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
|
|
+ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
|
|
+
|
|
+ /* Program PDC registers */
|
|
+ at91_spi_write(ATMEL_PDC_TPR, device->tx);
|
|
+ at91_spi_write(ATMEL_PDC_RPR, device->rx);
|
|
+ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
|
|
+ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
|
|
+
|
|
+ /* Is there a second transfer? */
|
|
+ if (list->nr_transfers > 1) {
|
|
+ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
|
|
+ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
|
|
+
|
|
+ /* Program Next PDC registers */
|
|
+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
|
|
+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
|
|
+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
|
|
+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
|
|
+ }
|
|
+ else {
|
|
+ device->txnext = 0;
|
|
+ device->rxnext = 0;
|
|
+ at91_spi_write(ATMEL_PDC_TNCR, 0);
|
|
+ at91_spi_write(ATMEL_PDC_RNCR, 0);
|
|
+ }
|
|
+
|
|
+ // TODO: If we are doing consecutive transfers (at high speed, or
|
|
+ // small buffers), then it might be worth modifying the 'Delay between
|
|
+ // Consecutive Transfers' in the CSR registers.
|
|
+ // This is an issue if we cannot chain the next buffer fast enough
|
|
+ // in the interrupt handler.
|
|
+
|
|
+ /* Enable transmitter and receiver */
|
|
+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
|
|
+
|
|
+ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */
|
|
+ wait_for_completion(&transfer_complete);
|
|
+
|
|
+#ifdef DEBUG_SPI
|
|
+ printk("SPI transfer end\n");
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/*
|
|
+ * Handle interrupts from the SPI controller.
|
|
+ */
|
|
+static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ unsigned int status;
|
|
+ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
|
|
+ struct spi_transfer_list *list = device->xfers;
|
|
+
|
|
+#ifdef DEBUG_SPI
|
|
+ printk("SPI interrupt %i\n", current_device);
|
|
+#endif
|
|
+
|
|
+ if (!list)
|
|
+ panic("at91_spi: spi_interrupt with a NULL transfer list");
|
|
+
|
|
+ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */
|
|
+
|
|
+ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
|
|
+ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
|
|
+
|
|
+ device->tx = device->txnext; /* move next transfer to current transfer */
|
|
+ device->rx = device->rxnext;
|
|
+
|
|
+ list->curr = list->curr + 1;
|
|
+ if (list->curr == list->nr_transfers) { /* all transfers complete */
|
|
+ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */
|
|
+
|
|
+ /* Disable transmitter and receiver */
|
|
+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
|
|
+
|
|
+ device->xfers = NULL;
|
|
+ complete(&transfer_complete);
|
|
+ }
|
|
+ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */
|
|
+ device->txnext = 0;
|
|
+ device->rxnext = 0;
|
|
+ at91_spi_write(ATMEL_PDC_TNCR, 0);
|
|
+ at91_spi_write(ATMEL_PDC_RNCR, 0);
|
|
+ }
|
|
+ else {
|
|
+ int i = (list->curr)+1;
|
|
+
|
|
+ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
|
|
+ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
|
|
+
|
|
+ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
|
|
+ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
|
|
+ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
|
|
+ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
|
|
+ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
|
|
+ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
|
|
+ }
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/*
|
|
+ * Initialize the SPI controller
|
|
+ */
|
|
+static int __init at91spi_probe(struct platform_device *pdev)
|
|
+{
|
|
+ int i;
|
|
+ unsigned long scbr;
|
|
+ struct resource *res;
|
|
+
|
|
+ init_MUTEX(&spi_lock);
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!res)
|
|
+ return -ENXIO;
|
|
+
|
|
+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
|
|
+ return -EBUSY;
|
|
+
|
|
+ spi_base = ioremap(res->start, res->end - res->start + 1);
|
|
+ if (!spi_base) {
|
|
+ release_mem_region(res->start, res->end - res->start + 1);
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ spi_clk = clk_get(NULL, "spi_clk");
|
|
+ if (IS_ERR(spi_clk)) {
|
|
+ printk(KERN_ERR "at91_spi: no clock defined\n");
|
|
+ iounmap(spi_base);
|
|
+ release_mem_region(res->start, res->end - res->start + 1);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */
|
|
+
|
|
+ /*
|
|
+ * Calculate the correct SPI baud-rate divisor.
|
|
+ */
|
|
+ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
|
|
+ scbr = scbr + 1; /* round up */
|
|
+
|
|
+ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
|
|
+
|
|
+ /* Set Chip Select registers to good defaults */
|
|
+ for (i = 0; i < 4; i++) {
|
|
+ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
|
|
+ }
|
|
+
|
|
+ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
|
|
+
|
|
+ memset(&spi_dev, 0, sizeof(spi_dev));
|
|
+ spi_dev[0].pcs = 0xE;
|
|
+ spi_dev[1].pcs = 0xD;
|
|
+ spi_dev[2].pcs = 0xB;
|
|
+ spi_dev[3].pcs = 0x7;
|
|
+
|
|
+ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
|
|
+ clk_put(spi_clk);
|
|
+ iounmap(spi_base);
|
|
+ release_mem_region(res->start, res->end - res->start + 1);
|
|
+ return -EBUSY;
|
|
+ }
|
|
+
|
|
+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int __devexit at91spi_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct resource *res;
|
|
+
|
|
+ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
|
|
+ clk_put(spi_clk);
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ iounmap(spi_base);
|
|
+ release_mem_region(res->start, res->end - res->start + 1);
|
|
+
|
|
+ free_irq(AT91RM9200_ID_SPI, 0);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver at91spi_driver = {
|
|
+ .probe = at91spi_probe,
|
|
+ .remove = __devexit_p(at91spi_remove),
|
|
+ .driver = {
|
|
+ .name = "at91_spi",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init at91spi_init(void)
|
|
+{
|
|
+ return platform_driver_register(&at91spi_driver);
|
|
+}
|
|
+
|
|
+static void __exit at91spi_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&at91spi_driver);
|
|
+}
|
|
+
|
|
+EXPORT_SYMBOL(spi_access_bus);
|
|
+EXPORT_SYMBOL(spi_release_bus);
|
|
+EXPORT_SYMBOL(spi_transfer);
|
|
+
|
|
+module_init(at91spi_init);
|
|
+module_exit(at91spi_exit);
|
|
+
|
|
+MODULE_LICENSE("GPL")
|
|
+MODULE_AUTHOR("Andrew Victor")
|
|
+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
|
|
diff -urN -x CVS linux-2.6.24/drivers/char/at91_spidev.c linux-2.6/drivers/char/at91_spidev.c
|
|
--- linux-2.6.24/drivers/char/at91_spidev.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/drivers/char/at91_spidev.c 2007-12-31 15:18:43.000000000 +0200
|
|
@@ -0,0 +1,233 @@
|
|
+/*
|
|
+ * User-space interface to the SPI bus on Atmel AT91RM9200
|
|
+ *
|
|
+ * Copyright (C) 2003 SAN People (Pty) Ltd
|
|
+ *
|
|
+ * Based on SPI driver by Rick Bronson
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version
|
|
+ * 2 of the License, or (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/highmem.h>
|
|
+#include <linux/pagemap.h>
|
|
+#include <asm/arch/spi.h>
|
|
+
|
|
+#ifdef CONFIG_DEVFS_FS
|
|
+#include <linux/devfs_fs_kernel.h>
|
|
+#endif
|
|
+
|
|
+
|
|
+#undef DEBUG_SPIDEV
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/*
|
|
+ * Read or Write to SPI bus.
|
|
+ */
|
|
+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
|
|
+{
|
|
+ unsigned int spi_device = (unsigned int) file->private_data;
|
|
+
|
|
+ struct mm_struct * mm;
|
|
+ struct page ** maplist;
|
|
+ struct spi_transfer_list* list;
|
|
+ int pgcount;
|
|
+
|
|
+ unsigned int ofs, pagelen;
|
|
+ int res, i, err;
|
|
+
|
|
+ if (!count) {
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
|
|
+ if (!list) {
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ mm = current->mm;
|
|
+
|
|
+ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
|
|
+
|
|
+ if (pgcount >= MAX_SPI_TRANSFERS) {
|
|
+ kfree(list);
|
|
+ return -EFBIG;
|
|
+ }
|
|
+
|
|
+ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
|
|
+
|
|
+ if (!maplist) {
|
|
+ kfree(list);
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+ flush_cache_all();
|
|
+ down_read(&mm->mmap_sem);
|
|
+ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
|
|
+ up_read(&mm->mmap_sem);
|
|
+
|
|
+ if (err < 0) {
|
|
+ kfree(list);
|
|
+ kfree(maplist);
|
|
+ return err;
|
|
+ }
|
|
+ pgcount = err;
|
|
+
|
|
+#ifdef DEBUG_SPIDEV
|
|
+ printk("spidev_rd_rw: %i %i\n", count, pgcount);
|
|
+#endif
|
|
+
|
|
+ /* Set default return value = transfer length */
|
|
+ res = count;
|
|
+
|
|
+ /*
|
|
+ * At this point, the virtual area buf[0] .. buf[count-1] will have
|
|
+ * corresponding pages mapped in the physical memory and locked until
|
|
+ * we unmap the kiobuf. The pages cannot be swapped out or moved
|
|
+ * around.
|
|
+ */
|
|
+ ofs = (unsigned long) buf & (PAGE_SIZE -1);
|
|
+ pagelen = PAGE_SIZE - ofs;
|
|
+ if (count < pagelen)
|
|
+ pagelen = count;
|
|
+
|
|
+ for (i = 0; i < pgcount; i++) {
|
|
+ flush_dcache_page(maplist[i]);
|
|
+
|
|
+ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
|
|
+ list->txlen[i] = list->rxlen[i] = pagelen;
|
|
+
|
|
+#ifdef DEBUG_SPIDEV
|
|
+ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]);
|
|
+#endif
|
|
+
|
|
+ ofs = 0; /* all subsequent transfers start at beginning of a page */
|
|
+ count = count - pagelen;
|
|
+ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
|
|
+ }
|
|
+ list->nr_transfers = pgcount;
|
|
+
|
|
+ /* Perform transfer on SPI bus */
|
|
+ spi_access_bus(spi_device);
|
|
+ spi_transfer(list);
|
|
+ spi_release_bus(spi_device);
|
|
+
|
|
+ while (pgcount--) {
|
|
+ page_cache_release (maplist[pgcount]);
|
|
+ }
|
|
+ flush_cache_all();
|
|
+
|
|
+ kfree(maplist);
|
|
+ kfree(list);
|
|
+
|
|
+ return res;
|
|
+}
|
|
+
|
|
+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
|
|
+{
|
|
+ int spi_device = MINOR(inode->i_rdev);
|
|
+
|
|
+ if (spi_device >= NR_SPI_DEVICES)
|
|
+ return -ENODEV;
|
|
+
|
|
+ // TODO: This interface can be used to configure the SPI bus.
|
|
+ // Configurable options could include: Speed, Clock Polarity, Clock Phase
|
|
+
|
|
+ switch(cmd) {
|
|
+ default:
|
|
+ return -ENOIOCTLCMD;
|
|
+ }
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Open the SPI device
|
|
+ */
|
|
+static int spidev_open(struct inode *inode, struct file *file)
|
|
+{
|
|
+ unsigned int spi_device = MINOR(inode->i_rdev);
|
|
+
|
|
+ if (spi_device >= NR_SPI_DEVICES)
|
|
+ return -ENODEV;
|
|
+
|
|
+ /*
|
|
+ * 'private_data' is actually a pointer, but we overload it with the
|
|
+ * value we want to store.
|
|
+ */
|
|
+ file->private_data = (void *)spi_device;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Close the SPI device
|
|
+ */
|
|
+static int spidev_close(struct inode *inode, struct file *file)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+static struct file_operations spidev_fops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .llseek = no_llseek,
|
|
+ .read = spidev_rd_wr,
|
|
+ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
|
|
+ .ioctl = spidev_ioctl,
|
|
+ .open = spidev_open,
|
|
+ .release = spidev_close,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * Install the SPI /dev interface driver
|
|
+ */
|
|
+static int __init at91_spidev_init(void)
|
|
+{
|
|
+#ifdef CONFIG_DEVFS_FS
|
|
+ int i;
|
|
+#endif
|
|
+
|
|
+ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
|
|
+ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+#ifdef CONFIG_DEVFS_FS
|
|
+ devfs_mk_dir("spi");
|
|
+ for (i = 0; i < NR_SPI_DEVICES; i++) {
|
|
+ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
|
|
+ }
|
|
+#endif
|
|
+ printk(KERN_INFO "AT91 SPI driver loaded\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Remove the SPI /dev interface driver
|
|
+ */
|
|
+static void __exit at91_spidev_exit(void)
|
|
+{
|
|
+#ifdef CONFIG_DEVFS_FS
|
|
+ int i;
|
|
+ for (i = 0; i < NR_SPI_DEVICES; i++) {
|
|
+ devfs_remove("spi/%d", i);
|
|
+ }
|
|
+
|
|
+ devfs_remove("spi");
|
|
+#endif
|
|
+
|
|
+ unregister_chrdev(SPI_MAJOR, "spi");
|
|
+}
|
|
+
|
|
+module_init(at91_spidev_init);
|
|
+module_exit(at91_spidev_exit);
|
|
+
|
|
+MODULE_LICENSE("GPL")
|
|
+MODULE_AUTHOR("Andrew Victor")
|
|
+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
|
|
diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/busses/Kconfig
|
|
--- linux-2.6.24/drivers/i2c/busses/Kconfig 2008-03-01 22:02:10.000000000 +0200
|
|
+++ linux-2.6/drivers/i2c/busses/Kconfig 2007-12-31 10:44:20.000000000 +0200
|
|
@@ -88,6 +88,14 @@
|
|
to support combined I2C messages. Use the i2c-gpio driver
|
|
unless your system can cope with those limitations.
|
|
|
|
+config I2C_AT91_CLOCKRATE
|
|
+ prompt "Atmel AT91 I2C/TWI clock-rate"
|
|
+ depends on I2C_AT91
|
|
+ int
|
|
+ default 100000
|
|
+ help
|
|
+ Set the AT91 I2C/TWI clock-rate.
|
|
+
|
|
config I2C_AU1550
|
|
tristate "Au1550/Au1200 SMBus interface"
|
|
depends on SOC_AU1550 || SOC_AU1200
|
|
@@ -629,6 +637,14 @@
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-voodoo3.
|
|
|
|
+config I2C_PCA
|
|
+ tristate "PCA9564"
|
|
+ depends on I2C
|
|
+ select I2C_ALGOPCA
|
|
+ help
|
|
+ This driver support the Philips PCA 9564 Parallel bus to I2C
|
|
+ bus controller.
|
|
+
|
|
config I2C_PCA_ISA
|
|
tristate "PCA9564 on an ISA bus"
|
|
depends on ISA
|
|
diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/Makefile linux-2.6/drivers/i2c/busses/Makefile
|
|
--- linux-2.6.24/drivers/i2c/busses/Makefile 2008-03-01 22:02:10.000000000 +0200
|
|
+++ linux-2.6/drivers/i2c/busses/Makefile 2007-12-31 10:44:20.000000000 +0200
|
|
@@ -30,6 +30,7 @@
|
|
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
|
|
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
|
|
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
|
|
+obj-$(CONFIG_I2C_PCA) += i2c-pca.o
|
|
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
|
|
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
|
|
obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
|
|
diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2c/busses/i2c-at91.c
|
|
--- linux-2.6.24/drivers/i2c/busses/i2c-at91.c 2008-03-01 22:02:10.000000000 +0200
|
|
+++ linux-2.6/drivers/i2c/busses/i2c-at91.c 2008-01-16 13:15:34.000000000 +0200
|
|
@@ -31,8 +31,11 @@
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/cpu.h>
|
|
|
|
-#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
|
|
|
|
+/* Clockrate is configurable - max 400 Kbits/sec */
|
|
+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
|
|
+module_param(clockrate, uint, 0);
|
|
+MODULE_PARM_DESC(clockrate, "The TWI clockrate");
|
|
|
|
static struct clk *twi_clk;
|
|
static void __iomem *twi_base;
|
|
@@ -53,7 +56,7 @@
|
|
at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
|
|
|
|
/* Calcuate clock dividers */
|
|
- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
|
|
+ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
|
|
cdiv = cdiv + 1; /* round up */
|
|
ckdiv = 0;
|
|
while (cdiv > 255) {
|
|
@@ -61,11 +64,12 @@
|
|
cdiv = cdiv >> 1;
|
|
}
|
|
|
|
- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
|
|
- if (ckdiv > 5) {
|
|
- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
|
|
- ckdiv = 5;
|
|
- }
|
|
+ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */
|
|
+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
|
|
+ ckdiv = 5;
|
|
+ } else if (ckdiv > 7) {
|
|
+ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
|
|
+ ckdiv = 7;
|
|
}
|
|
|
|
at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
|
|
diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/i2c-pca.c linux-2.6/drivers/i2c/busses/i2c-pca.c
|
|
--- linux-2.6.24/drivers/i2c/busses/i2c-pca.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/drivers/i2c/busses/i2c-pca.c 2007-12-31 15:18:43.000000000 +0200
|
|
@@ -0,0 +1,213 @@
|
|
+/*
|
|
+ * Platform driver for PCA9564 I2C bus controller.
|
|
+ *
|
|
+ * (C) 2006 Andrew Victor
|
|
+ *
|
|
+ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
|
|
+ * Copyright (C) 2004 Arcom Control Systems
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/moduleparam.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/wait.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#include <linux/i2c.h>
|
|
+#include <linux/i2c-algo-pca.h>
|
|
+
|
|
+#include <asm/io.h>
|
|
+
|
|
+#include "../algos/i2c-algo-pca.h"
|
|
+
|
|
+#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */
|
|
+#define PCA_CLOCK I2C_PCA_CON_59kHz
|
|
+
|
|
+//#define REG_SHIFT 2
|
|
+#define REG_SHIFT 0
|
|
+
|
|
+//#define DEBUG_IO
|
|
+
|
|
+#define PCA_IO_SIZE 4
|
|
+
|
|
+static void __iomem *base_addr;
|
|
+static int irq;
|
|
+static wait_queue_head_t pca_wait;
|
|
+
|
|
+static int pca_getown(struct i2c_algo_pca_data *adap)
|
|
+{
|
|
+ return PCA_OWN_ADDRESS;
|
|
+}
|
|
+
|
|
+static int pca_getclock(struct i2c_algo_pca_data *adap)
|
|
+{
|
|
+ return PCA_CLOCK;
|
|
+}
|
|
+
|
|
+static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
|
|
+{
|
|
+#ifdef DEBUG_IO
|
|
+ static char *names[] = { "T/O", "DAT", "ADR", "CON" };
|
|
+ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
|
|
+#endif
|
|
+ udelay(1);
|
|
+ outb(val, base_addr + (reg << REG_SHIFT));
|
|
+}
|
|
+
|
|
+static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
|
|
+{
|
|
+ int res;
|
|
+
|
|
+ udelay(1);
|
|
+ res = inb(base_addr + (reg << REG_SHIFT));
|
|
+#ifdef DEBUG_IO
|
|
+ {
|
|
+ static char *names[] = { "STA", "DAT", "ADR", "CON" };
|
|
+ printk("*** read %s => %#04x\n", names[reg], res);
|
|
+ }
|
|
+#endif
|
|
+ return res;
|
|
+}
|
|
+
|
|
+static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
|
|
+{
|
|
+ int ret = 0;
|
|
+
|
|
+ if (irq > -1) {
|
|
+ ret = wait_event_interruptible(pca_wait,
|
|
+ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
|
|
+ } else {
|
|
+ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
|
|
+ udelay(100);
|
|
+ }
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static irqreturn_t pca_handler(int this_irq, void *dev_id)
|
|
+{
|
|
+ wake_up_interruptible(&pca_wait);
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static struct i2c_algo_pca_data pca_i2c_data = {
|
|
+ .get_own = pca_getown,
|
|
+ .get_clock = pca_getclock,
|
|
+ .write_byte = pca_writebyte,
|
|
+ .read_byte = pca_readbyte,
|
|
+ .wait_for_interrupt = pca_waitforinterrupt,
|
|
+};
|
|
+
|
|
+static struct i2c_adapter pca_i2c_ops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .id = I2C_HW_A_PLAT,
|
|
+ .algo_data = &pca_i2c_data,
|
|
+ .name = "PCA9564",
|
|
+ .class = I2C_CLASS_HWMON,
|
|
+};
|
|
+
|
|
+static int __devinit pca_i2c_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct resource *res;
|
|
+
|
|
+ init_waitqueue_head(&pca_wait);
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!res)
|
|
+ return -ENODEV;
|
|
+
|
|
+ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
|
|
+ return -ENXIO;
|
|
+
|
|
+ base_addr = ioremap(res->start, PCA_IO_SIZE);
|
|
+ if (base_addr == NULL)
|
|
+ goto out_region;
|
|
+
|
|
+ irq = platform_get_irq(pdev, 0);
|
|
+ if (irq > -1) {
|
|
+ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
|
|
+ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
|
|
+ goto out_remap;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* set up the driverfs linkage to our parent device */
|
|
+ pca_i2c_ops.dev.parent = &pdev->dev;
|
|
+
|
|
+ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
|
|
+ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
|
|
+ goto out_irq;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+
|
|
+ out_irq:
|
|
+ if (irq > -1)
|
|
+ free_irq(irq, &pca_i2c_ops);
|
|
+
|
|
+ out_remap:
|
|
+ iounmap(base_addr);
|
|
+
|
|
+ out_region:
|
|
+ release_mem_region(res->start, PCA_IO_SIZE);
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+static int __devexit pca_i2c_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct resource *res;
|
|
+
|
|
+ i2c_del_adapter(&pca_i2c_ops);
|
|
+
|
|
+ if (irq > 0)
|
|
+ free_irq(irq, NULL);
|
|
+
|
|
+ iounmap(base_addr);
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ release_mem_region(res->start, PCA_IO_SIZE);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver pca_i2c_driver = {
|
|
+ .probe = pca_i2c_probe,
|
|
+ .remove = __devexit_p(pca_i2c_remove),
|
|
+ .driver = {
|
|
+ .name = "pca9564",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init pca_i2c_init(void)
|
|
+{
|
|
+ return platform_driver_register(&pca_i2c_driver);
|
|
+}
|
|
+
|
|
+static void __exit pca_i2c_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&pca_i2c_driver);
|
|
+}
|
|
+
|
|
+module_init(pca_i2c_init);
|
|
+module_exit(pca_i2c_exit);
|
|
+
|
|
+MODULE_AUTHOR("Andrew Victor");
|
|
+MODULE_DESCRIPTION("PCA9564 platform driver");
|
|
+MODULE_LICENSE("GPL");
|
|
diff -urN -x CVS linux-2.6.24/drivers/mmc/host/at91_mci.c linux-2.6/drivers/mmc/host/at91_mci.c
|
|
--- linux-2.6.24/drivers/mmc/host/at91_mci.c 2008-03-01 22:02:12.000000000 +0200
|
|
+++ linux-2.6/drivers/mmc/host/at91_mci.c 2008-02-25 22:21:36.000000000 +0200
|
|
@@ -70,10 +70,11 @@
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
+#include <asm/gpio.h>
|
|
+
|
|
#include <asm/mach/mmc.h>
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/cpu.h>
|
|
-#include <asm/arch/gpio.h>
|
|
#include <asm/arch/at91_mci.h>
|
|
|
|
#define DRIVER_NAME "at91_mci"
|
|
@@ -658,13 +659,14 @@
|
|
/* maybe switch power to the card */
|
|
if (host->board->vcc_pin) {
|
|
switch (ios->power_mode) {
|
|
- case MMC_POWER_OFF:
|
|
- at91_set_gpio_value(host->board->vcc_pin, 0);
|
|
- break;
|
|
- case MMC_POWER_UP:
|
|
- case MMC_POWER_ON:
|
|
- at91_set_gpio_value(host->board->vcc_pin, 1);
|
|
- break;
|
|
+ case MMC_POWER_OFF:
|
|
+ gpio_set_value(host->board->vcc_pin, 0);
|
|
+ break;
|
|
+ case MMC_POWER_UP:
|
|
+ gpio_set_value(host->board->vcc_pin, 1);
|
|
+ break;
|
|
+ default:
|
|
+ break;
|
|
}
|
|
}
|
|
}
|
|
@@ -768,7 +770,7 @@
|
|
static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
|
|
{
|
|
struct at91mci_host *host = _host;
|
|
- int present = !at91_get_gpio_value(irq);
|
|
+ int present = !gpio_get_value(irq_to_gpio(irq));
|
|
|
|
/*
|
|
* we expect this irq on both insert and remove,
|
|
@@ -793,7 +795,7 @@
|
|
struct at91mci_host *host = mmc_priv(mmc);
|
|
|
|
if (host->board->wp_pin) {
|
|
- read_only = at91_get_gpio_value(host->board->wp_pin);
|
|
+ read_only = gpio_get_value(host->board->wp_pin);
|
|
printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc),
|
|
(read_only ? "read-only" : "read-write") );
|
|
}
|
|
@@ -820,8 +822,6 @@
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
- pr_debug("Probe MCI devices\n");
|
|
-
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENXIO;
|
|
@@ -831,9 +831,9 @@
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
|
|
if (!mmc) {
|
|
- pr_debug("Failed to allocate mmc host\n");
|
|
- release_mem_region(res->start, res->end - res->start + 1);
|
|
- return -ENOMEM;
|
|
+ ret = -ENOMEM;
|
|
+ dev_dbg(&pdev->dev, "couldn't allocate mmc host\n");
|
|
+ goto fail6;
|
|
}
|
|
|
|
mmc->ops = &at91_mci_ops;
|
|
@@ -853,19 +853,44 @@
|
|
if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
else
|
|
- printk("AT91 MMC: 4 wire bus mode not supported"
|
|
+ dev_warn(&pdev->dev, "4 wire bus mode not supported"
|
|
" - using 1 wire\n");
|
|
}
|
|
|
|
/*
|
|
+ * Reserve GPIOs ... board init code makes sure these pins are set
|
|
+ * up as GPIOs with the right direction (input, except for vcc)
|
|
+ */
|
|
+ if (host->board->det_pin) {
|
|
+ ret = gpio_request(host->board->det_pin, "mmc_detect");
|
|
+ if (ret < 0) {
|
|
+ dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
|
|
+ goto fail5;
|
|
+ }
|
|
+ }
|
|
+ if (host->board->wp_pin) {
|
|
+ ret = gpio_request(host->board->wp_pin, "mmc_wp");
|
|
+ if (ret < 0) {
|
|
+ dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n");
|
|
+ goto fail4;
|
|
+ }
|
|
+ }
|
|
+ if (host->board->vcc_pin) {
|
|
+ ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
|
|
+ if (ret < 0) {
|
|
+ dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n");
|
|
+ goto fail3;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /*
|
|
* Get Clock
|
|
*/
|
|
host->mci_clk = clk_get(&pdev->dev, "mci_clk");
|
|
if (IS_ERR(host->mci_clk)) {
|
|
- printk(KERN_ERR "AT91 MMC: no clock defined.\n");
|
|
- mmc_free_host(mmc);
|
|
- release_mem_region(res->start, res->end - res->start + 1);
|
|
- return -ENODEV;
|
|
+ ret = -ENODEV;
|
|
+ dev_dbg(&pdev->dev, "no mci_clk?\n");
|
|
+ goto fail2;
|
|
}
|
|
|
|
/*
|
|
@@ -873,10 +898,8 @@
|
|
*/
|
|
host->baseaddr = ioremap(res->start, res->end - res->start + 1);
|
|
if (!host->baseaddr) {
|
|
- clk_put(host->mci_clk);
|
|
- mmc_free_host(mmc);
|
|
- release_mem_region(res->start, res->end - res->start + 1);
|
|
- return -ENOMEM;
|
|
+ ret = -ENOMEM;
|
|
+ goto fail1;
|
|
}
|
|
|
|
/*
|
|
@@ -890,15 +913,11 @@
|
|
* Allocate the MCI interrupt
|
|
*/
|
|
host->irq = platform_get_irq(pdev, 0);
|
|
- ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
|
|
+ ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED,
|
|
+ mmc_hostname(mmc), host);
|
|
if (ret) {
|
|
- printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
|
|
- clk_disable(host->mci_clk);
|
|
- clk_put(host->mci_clk);
|
|
- mmc_free_host(mmc);
|
|
- iounmap(host->baseaddr);
|
|
- release_mem_region(res->start, res->end - res->start + 1);
|
|
- return ret;
|
|
+ dev_dbg(&pdev->dev, "request MCI interrupt failed\n");
|
|
+ goto fail0;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, mmc);
|
|
@@ -907,8 +926,7 @@
|
|
* Add host to MMC layer
|
|
*/
|
|
if (host->board->det_pin) {
|
|
- host->present = !at91_get_gpio_value(host->board->det_pin);
|
|
- device_init_wakeup(&pdev->dev, 1);
|
|
+ host->present = !gpio_get_value(host->board->det_pin);
|
|
}
|
|
else
|
|
host->present = -1;
|
|
@@ -919,15 +937,38 @@
|
|
* monitor card insertion/removal if we can
|
|
*/
|
|
if (host->board->det_pin) {
|
|
- ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
|
|
- 0, DRIVER_NAME, host);
|
|
+ ret = request_irq(gpio_to_irq(host->board->det_pin),
|
|
+ at91_mmc_det_irq, 0, mmc_hostname(mmc), host);
|
|
if (ret)
|
|
- printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
|
|
+ dev_warn(&pdev->dev, "request MMC detect irq failed\n");
|
|
+ else
|
|
+ device_init_wakeup(&pdev->dev, 1);
|
|
}
|
|
|
|
pr_debug("Added MCI driver\n");
|
|
|
|
return 0;
|
|
+
|
|
+fail0:
|
|
+ clk_disable(host->mci_clk);
|
|
+ iounmap(host->baseaddr);
|
|
+fail1:
|
|
+ clk_put(host->mci_clk);
|
|
+fail2:
|
|
+ if (host->board->vcc_pin)
|
|
+ gpio_free(host->board->vcc_pin);
|
|
+fail3:
|
|
+ if (host->board->wp_pin)
|
|
+ gpio_free(host->board->wp_pin);
|
|
+fail4:
|
|
+ if (host->board->det_pin)
|
|
+ gpio_free(host->board->det_pin);
|
|
+fail5:
|
|
+ mmc_free_host(mmc);
|
|
+fail6:
|
|
+ release_mem_region(res->start, res->end - res->start + 1);
|
|
+ dev_err(&pdev->dev, "probe failed, err %d\n", ret);
|
|
+ return ret;
|
|
}
|
|
|
|
/*
|
|
@@ -945,9 +986,10 @@
|
|
host = mmc_priv(mmc);
|
|
|
|
if (host->board->det_pin) {
|
|
+ if (device_can_wakeup(&pdev->dev))
|
|
+ free_irq(gpio_to_irq(host->board->det_pin), host);
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
- free_irq(host->board->det_pin, host);
|
|
- cancel_delayed_work(&host->mmc->detect);
|
|
+ gpio_free(host->board->det_pin);
|
|
}
|
|
|
|
at91_mci_disable(host);
|
|
@@ -957,6 +999,11 @@
|
|
clk_disable(host->mci_clk); /* Disable the peripheral clock */
|
|
clk_put(host->mci_clk);
|
|
|
|
+ if (host->board->vcc_pin)
|
|
+ gpio_free(host->board->vcc_pin);
|
|
+ if (host->board->wp_pin)
|
|
+ gpio_free(host->board->wp_pin);
|
|
+
|
|
iounmap(host->baseaddr);
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(res->start, res->end - res->start + 1);
|
|
diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/Kconfig linux-2.6/drivers/mtd/devices/Kconfig
|
|
--- linux-2.6.24/drivers/mtd/devices/Kconfig 2008-03-01 22:02:12.000000000 +0200
|
|
+++ linux-2.6/drivers/mtd/devices/Kconfig 2007-12-31 10:44:25.000000000 +0200
|
|
@@ -270,5 +270,17 @@
|
|
LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
|
|
you have managed to wipe the first block.
|
|
|
|
-endmenu
|
|
+config MTD_AT91_DATAFLASH
|
|
+ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
|
|
+ depends on MTD && ARCH_AT91RM9200 && AT91_SPI
|
|
+ help
|
|
+ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
|
|
+ If you have such a board, say 'Y'.
|
|
+
|
|
+config DATAFLASH_ALWAYS_ADD_DEVICE
|
|
+ bool "Register whole DataFlash device"
|
|
+ depends on MTD_AT91_DATAFLASH
|
|
+ help
|
|
+ Always add the whole DataFlash device when using MTD partitions.
|
|
|
|
+endmenu
|
|
diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/Makefile linux-2.6/drivers/mtd/devices/Makefile
|
|
--- linux-2.6.24/drivers/mtd/devices/Makefile 2008-03-01 22:02:12.000000000 +0200
|
|
+++ linux-2.6/drivers/mtd/devices/Makefile 2007-12-31 10:48:27.000000000 +0200
|
|
@@ -17,3 +17,4 @@
|
|
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
|
|
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
|
|
obj-$(CONFIG_MTD_M25P80) += m25p80.o
|
|
+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
|
|
diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/at91_dataflash.c linux-2.6/drivers/mtd/devices/at91_dataflash.c
|
|
--- linux-2.6.24/drivers/mtd/devices/at91_dataflash.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/drivers/mtd/devices/at91_dataflash.c 2007-12-31 15:18:43.000000000 +0200
|
|
@@ -0,0 +1,673 @@
|
|
+/*
|
|
+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
|
|
+ *
|
|
+ * Copyright (C) SAN People (Pty) Ltd
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version
|
|
+ * 2 of the License, or (at your option) any later version.
|
|
+*/
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/pci.h>
|
|
+#include <linux/mtd/mtd.h>
|
|
+#include <linux/mtd/partitions.h>
|
|
+
|
|
+#include <asm/mach-types.h>
|
|
+
|
|
+#include <asm/arch/spi.h>
|
|
+
|
|
+
|
|
+#undef DEBUG_DATAFLASH
|
|
+
|
|
+#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
|
|
+
|
|
+#define OP_READ_CONTINUOUS 0xE8
|
|
+#define OP_READ_PAGE 0xD2
|
|
+#define OP_READ_BUFFER1 0xD4
|
|
+#define OP_READ_BUFFER2 0xD6
|
|
+#define OP_READ_STATUS 0xD7
|
|
+
|
|
+#define OP_ERASE_PAGE 0x81
|
|
+#define OP_ERASE_BLOCK 0x50
|
|
+
|
|
+#define OP_TRANSFER_BUF1 0x53
|
|
+#define OP_TRANSFER_BUF2 0x55
|
|
+#define OP_COMPARE_BUF1 0x60
|
|
+#define OP_COMPARE_BUF2 0x61
|
|
+
|
|
+#define OP_PROGRAM_VIA_BUF1 0x82
|
|
+#define OP_PROGRAM_VIA_BUF2 0x85
|
|
+
|
|
+struct dataflash_local
|
|
+{
|
|
+ int spi; /* SPI chip-select number */
|
|
+
|
|
+ unsigned int page_size; /* number of bytes per page */
|
|
+ unsigned short page_offset; /* page offset in flash address */
|
|
+};
|
|
+
|
|
+
|
|
+/* Detected DataFlash devices */
|
|
+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
|
|
+static int nr_devices = 0;
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
+
|
|
+static struct mtd_partition static_partitions_2M[] =
|
|
+{
|
|
+ {
|
|
+ .name = "bootloader",
|
|
+ .offset = 0,
|
|
+ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */
|
|
+ .mask_flags = MTD_WRITEABLE, /* read-only */
|
|
+ },
|
|
+ {
|
|
+ .name = "kernel",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 6 * 32 * 8 * 528, /* 6 sectors */
|
|
+ },
|
|
+ {
|
|
+ .name = "filesystem",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct mtd_partition static_partitions_4M[] =
|
|
+{
|
|
+ {
|
|
+ .name = "bootloader",
|
|
+ .offset = 0,
|
|
+ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */
|
|
+ .mask_flags = MTD_WRITEABLE, /* read-only */
|
|
+ },
|
|
+ {
|
|
+ .name = "kernel",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 4 * 64 * 8 * 528, /* 4 sectors */
|
|
+ },
|
|
+ {
|
|
+ .name = "filesystem",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */
|
|
+ }
|
|
+};
|
|
+
|
|
+#if defined(CONFIG_MACH_KAFA)
|
|
+static struct mtd_partition static_partitions_8M[] =
|
|
+{
|
|
+ {
|
|
+ name: "romboot",
|
|
+ offset: 0,
|
|
+ size: 16 * 1056, /* 160 Kb */
|
|
+ mask_flags: MTD_WRITEABLE, /* read-only */
|
|
+ },
|
|
+ {
|
|
+ name: "uboot",
|
|
+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
|
|
+ size: 128 * 1056, /* 1 MB */
|
|
+ },
|
|
+ {
|
|
+ name: "kernel",
|
|
+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
|
|
+ size: 1024 * 1056, /* 1 MB */
|
|
+ },
|
|
+ {
|
|
+ name: "filesystem",
|
|
+ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
|
|
+ size: MTDPART_SIZ_FULL,
|
|
+ }
|
|
+};
|
|
+
|
|
+#elif defined(CONFIG_MACH_MULTMDP)
|
|
+
|
|
+static struct mtd_partition static_partitions_8M[] =
|
|
+{
|
|
+ {
|
|
+ .name = "bootloader",
|
|
+ .offset = 0,
|
|
+ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
|
|
+ .mask_flags = MTD_WRITEABLE, /* read-only */
|
|
+ },
|
|
+ {
|
|
+ .name = "configuration",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 20 * 1056,
|
|
+ },
|
|
+ {
|
|
+ .name = "kernel",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 1520 * 1056,
|
|
+ },
|
|
+ {
|
|
+ .name = "filesystem",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = MTDPART_SIZ_FULL,
|
|
+ }
|
|
+};
|
|
+
|
|
+#else
|
|
+
|
|
+static struct mtd_partition static_partitions_8M[] =
|
|
+{
|
|
+ {
|
|
+ .name = "bootloader",
|
|
+ .offset = 0,
|
|
+ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
|
|
+ .mask_flags = MTD_WRITEABLE, /* read-only */
|
|
+ },
|
|
+ {
|
|
+ .name = "kernel",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = 5 * 32 * 8 * 1056, /* 5 sectors */
|
|
+ },
|
|
+ {
|
|
+ .name = "filesystem",
|
|
+ .offset = MTDPART_OFS_NXTBLK,
|
|
+ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
|
|
+ }
|
|
+};
|
|
+#endif
|
|
+
|
|
+static const char *part_probes[] = { "cmdlinepart", NULL, };
|
|
+
|
|
+#endif
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
|
|
+ SPI transfers occur at the same time, spi_access_bus() will serialize them.
|
|
+ If this is not valid, then either (i) each dataflash 'priv' structure
|
|
+ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
|
|
+ another mechanism. */
|
|
+static struct spi_transfer_list* spi_transfer_desc;
|
|
+
|
|
+/*
|
|
+ * Perform a SPI transfer to access the DataFlash device.
|
|
+ */
|
|
+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
|
|
+ char* txnext, int txnext_len, char* rxnext, int rxnext_len)
|
|
+{
|
|
+ struct spi_transfer_list* list = spi_transfer_desc;
|
|
+
|
|
+ list->tx[0] = tx; list->txlen[0] = tx_len;
|
|
+ list->rx[0] = rx; list->rxlen[0] = rx_len;
|
|
+
|
|
+ list->tx[1] = txnext; list->txlen[1] = txnext_len;
|
|
+ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
|
|
+
|
|
+ list->nr_transfers = nr;
|
|
+
|
|
+ return spi_transfer(list);
|
|
+}
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/*
|
|
+ * Poll the DataFlash device until it is READY.
|
|
+ */
|
|
+static void at91_dataflash_waitready(void)
|
|
+{
|
|
+ char* command = kmalloc(2, GFP_KERNEL);
|
|
+
|
|
+ if (!command)
|
|
+ return;
|
|
+
|
|
+ do {
|
|
+ command[0] = OP_READ_STATUS;
|
|
+ command[1] = 0;
|
|
+
|
|
+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
|
|
+ } while ((command[1] & 0x80) == 0);
|
|
+
|
|
+ kfree(command);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Return the status of the DataFlash device.
|
|
+ */
|
|
+static unsigned short at91_dataflash_status(void)
|
|
+{
|
|
+ unsigned short status;
|
|
+ char* command = kmalloc(2, GFP_KERNEL);
|
|
+
|
|
+ if (!command)
|
|
+ return 0;
|
|
+
|
|
+ command[0] = OP_READ_STATUS;
|
|
+ command[1] = 0;
|
|
+
|
|
+ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
|
|
+ status = command[1];
|
|
+
|
|
+ kfree(command);
|
|
+ return status;
|
|
+}
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/*
|
|
+ * Erase blocks of flash.
|
|
+ */
|
|
+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
|
|
+{
|
|
+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
|
|
+ unsigned int pageaddr;
|
|
+ char* command;
|
|
+
|
|
+#ifdef DEBUG_DATAFLASH
|
|
+ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
|
|
+#endif
|
|
+
|
|
+ /* Sanity checks */
|
|
+ if (instr->addr + instr->len > mtd->size)
|
|
+ return -EINVAL;
|
|
+ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
|
|
+ return -EINVAL;
|
|
+ if ((instr->addr % priv->page_size) != 0)
|
|
+ return -EINVAL;
|
|
+
|
|
+ command = kmalloc(4, GFP_KERNEL);
|
|
+ if (!command)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ while (instr->len > 0) {
|
|
+ /* Calculate flash page address */
|
|
+ pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
|
|
+
|
|
+ command[0] = OP_ERASE_PAGE;
|
|
+ command[1] = (pageaddr & 0x00FF0000) >> 16;
|
|
+ command[2] = (pageaddr & 0x0000FF00) >> 8;
|
|
+ command[3] = 0;
|
|
+#ifdef DEBUG_DATAFLASH
|
|
+ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
|
|
+#endif
|
|
+
|
|
+ /* Send command to SPI device */
|
|
+ spi_access_bus(priv->spi);
|
|
+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
|
|
+
|
|
+ at91_dataflash_waitready(); /* poll status until ready */
|
|
+ spi_release_bus(priv->spi);
|
|
+
|
|
+ instr->addr += priv->page_size; /* next page */
|
|
+ instr->len -= priv->page_size;
|
|
+ }
|
|
+
|
|
+ kfree(command);
|
|
+
|
|
+ /* Inform MTD subsystem that erase is complete */
|
|
+ instr->state = MTD_ERASE_DONE;
|
|
+ if (instr->callback)
|
|
+ instr->callback(instr);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Read from the DataFlash device.
|
|
+ * from : Start offset in flash device
|
|
+ * len : Amount to read
|
|
+ * retlen : About of data actually read
|
|
+ * buf : Buffer containing the data
|
|
+ */
|
|
+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
|
|
+{
|
|
+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
|
|
+ unsigned int addr;
|
|
+ char* command;
|
|
+
|
|
+#ifdef DEBUG_DATAFLASH
|
|
+ printk("dataflash_read: %lli .. %lli\n", from, from+len);
|
|
+#endif
|
|
+
|
|
+ *retlen = 0;
|
|
+
|
|
+ /* Sanity checks */
|
|
+ if (!len)
|
|
+ return 0;
|
|
+ if (from + len > mtd->size)
|
|
+ return -EINVAL;
|
|
+
|
|
+ /* Calculate flash page/byte address */
|
|
+ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
|
|
+
|
|
+ command = kmalloc(8, GFP_KERNEL);
|
|
+ if (!command)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ command[0] = OP_READ_CONTINUOUS;
|
|
+ command[1] = (addr & 0x00FF0000) >> 16;
|
|
+ command[2] = (addr & 0x0000FF00) >> 8;
|
|
+ command[3] = (addr & 0x000000FF);
|
|
+#ifdef DEBUG_DATAFLASH
|
|
+ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
|
|
+#endif
|
|
+
|
|
+ /* Send command to SPI device */
|
|
+ spi_access_bus(priv->spi);
|
|
+ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
|
|
+ spi_release_bus(priv->spi);
|
|
+
|
|
+ *retlen = len;
|
|
+ kfree(command);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Write to the DataFlash device.
|
|
+ * to : Start offset in flash device
|
|
+ * len : Amount to write
|
|
+ * retlen : Amount of data actually written
|
|
+ * buf : Buffer containing the data
|
|
+ */
|
|
+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
|
|
+{
|
|
+ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
|
|
+ unsigned int pageaddr, addr, offset, writelen;
|
|
+ size_t remaining;
|
|
+ u_char *writebuf;
|
|
+ unsigned short status;
|
|
+ int res = 0;
|
|
+ char* command;
|
|
+ char* tmpbuf = NULL;
|
|
+
|
|
+#ifdef DEBUG_DATAFLASH
|
|
+ printk("dataflash_write: %lli .. %lli\n", to, to+len);
|
|
+#endif
|
|
+
|
|
+ *retlen = 0;
|
|
+
|
|
+ /* Sanity checks */
|
|
+ if (!len)
|
|
+ return 0;
|
|
+ if (to + len > mtd->size)
|
|
+ return -EINVAL;
|
|
+
|
|
+ command = kmalloc(4, GFP_KERNEL);
|
|
+ if (!command)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ pageaddr = ((unsigned)to / priv->page_size);
|
|
+ offset = ((unsigned)to % priv->page_size);
|
|
+ if (offset + len > priv->page_size)
|
|
+ writelen = priv->page_size - offset;
|
|
+ else
|
|
+ writelen = len;
|
|
+ writebuf = (u_char *)buf;
|
|
+ remaining = len;
|
|
+
|
|
+ /* Allocate temporary buffer */
|
|
+ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
|
|
+ if (!tmpbuf) {
|
|
+ kfree(command);
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ /* Gain access to the SPI bus */
|
|
+ spi_access_bus(priv->spi);
|
|
+
|
|
+ while (remaining > 0) {
|
|
+#ifdef DEBUG_DATAFLASH
|
|
+ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
|
|
+#endif
|
|
+
|
|
+ /* (1) Transfer to Buffer1 */
|
|
+ if (writelen != priv->page_size) {
|
|
+ addr = pageaddr << priv->page_offset;
|
|
+ command[0] = OP_TRANSFER_BUF1;
|
|
+ command[1] = (addr & 0x00FF0000) >> 16;
|
|
+ command[2] = (addr & 0x0000FF00) >> 8;
|
|
+ command[3] = 0;
|
|
+#ifdef DEBUG_DATAFLASH
|
|
+ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
|
|
+#endif
|
|
+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
|
|
+ at91_dataflash_waitready();
|
|
+ }
|
|
+
|
|
+ /* (2) Program via Buffer1 */
|
|
+ addr = (pageaddr << priv->page_offset) + offset;
|
|
+ command[0] = OP_PROGRAM_VIA_BUF1;
|
|
+ command[1] = (addr & 0x00FF0000) >> 16;
|
|
+ command[2] = (addr & 0x0000FF00) >> 8;
|
|
+ command[3] = (addr & 0x000000FF);
|
|
+#ifdef DEBUG_DATAFLASH
|
|
+ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
|
|
+#endif
|
|
+ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
|
|
+ at91_dataflash_waitready();
|
|
+
|
|
+ /* (3) Compare to Buffer1 */
|
|
+ addr = pageaddr << priv->page_offset;
|
|
+ command[0] = OP_COMPARE_BUF1;
|
|
+ command[1] = (addr & 0x00FF0000) >> 16;
|
|
+ command[2] = (addr & 0x0000FF00) >> 8;
|
|
+ command[3] = 0;
|
|
+#ifdef DEBUG_DATAFLASH
|
|
+ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
|
|
+#endif
|
|
+ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
|
|
+ at91_dataflash_waitready();
|
|
+
|
|
+ /* Get result of the compare operation */
|
|
+ status = at91_dataflash_status();
|
|
+ if (status & 0x40) {
|
|
+ printk("at91_dataflash: Write error on page %i\n", pageaddr);
|
|
+ remaining = 0;
|
|
+ writelen = 0;
|
|
+ res = -EIO;
|
|
+ }
|
|
+
|
|
+ remaining = remaining - writelen;
|
|
+ pageaddr++;
|
|
+ offset = 0;
|
|
+ writebuf += writelen;
|
|
+ *retlen += writelen;
|
|
+
|
|
+ if (remaining > priv->page_size)
|
|
+ writelen = priv->page_size;
|
|
+ else
|
|
+ writelen = remaining;
|
|
+ }
|
|
+
|
|
+ /* Release SPI bus */
|
|
+ spi_release_bus(priv->spi);
|
|
+
|
|
+ kfree(tmpbuf);
|
|
+ kfree(command);
|
|
+ return res;
|
|
+}
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/*
|
|
+ * Initialize and register DataFlash device with MTD subsystem.
|
|
+ */
|
|
+static int __init add_dataflash(int channel, char *name, int IDsize,
|
|
+ int nr_pages, int pagesize, int pageoffset)
|
|
+{
|
|
+ struct mtd_info *device;
|
|
+ struct dataflash_local *priv;
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
+ struct mtd_partition *mtd_parts = 0;
|
|
+ int mtd_parts_nr = 0;
|
|
+#endif
|
|
+
|
|
+ if (nr_devices >= DATAFLASH_MAX_DEVICES) {
|
|
+ printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
|
|
+ if (!device)
|
|
+ return -ENOMEM;
|
|
+ memset(device, 0, sizeof(struct mtd_info));
|
|
+
|
|
+ device->name = (char *)&device[1];
|
|
+ sprintf(device->name, "%s.spi%d", name, channel);
|
|
+ device->size = nr_pages * pagesize;
|
|
+ device->erasesize = pagesize;
|
|
+ device->writesize = pagesize;
|
|
+ device->owner = THIS_MODULE;
|
|
+ device->type = MTD_DATAFLASH;
|
|
+ device->flags = MTD_WRITEABLE;
|
|
+ device->erase = at91_dataflash_erase;
|
|
+ device->read = at91_dataflash_read;
|
|
+ device->write = at91_dataflash_write;
|
|
+
|
|
+ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
|
|
+ if (!priv) {
|
|
+ kfree(device);
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+ memset(priv, 0, sizeof(struct dataflash_local));
|
|
+
|
|
+ priv->spi = channel;
|
|
+ priv->page_size = pagesize;
|
|
+ priv->page_offset = pageoffset;
|
|
+ device->priv = priv;
|
|
+
|
|
+ mtd_devices[nr_devices] = device;
|
|
+ nr_devices++;
|
|
+ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
|
|
+
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
+#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
+ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
|
|
+#endif
|
|
+ if (mtd_parts_nr <= 0) {
|
|
+ switch (IDsize) {
|
|
+ case SZ_2M:
|
|
+ mtd_parts = static_partitions_2M;
|
|
+ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
|
|
+ break;
|
|
+ case SZ_4M:
|
|
+ mtd_parts = static_partitions_4M;
|
|
+ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
|
|
+ break;
|
|
+ case SZ_8M:
|
|
+ mtd_parts = static_partitions_8M;
|
|
+ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
|
|
+ break;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (mtd_parts_nr > 0) {
|
|
+#ifdef CONFIG_DATAFLASH_ALWAYS_ADD_DEVICE
|
|
+ add_mtd_device(device);
|
|
+#endif
|
|
+ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
|
|
+ }
|
|
+#endif
|
|
+ return add_mtd_device(device); /* add whole device */
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Detect and initialize DataFlash device connected to specified SPI channel.
|
|
+ *
|
|
+ * Device Density ID code Nr Pages Page Size Page offset
|
|
+ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
|
|
+ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
|
|
+ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
|
|
+ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
|
|
+ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
|
|
+ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
|
|
+ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11
|
|
+ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
|
|
+ */
|
|
+static int __init at91_dataflash_detect(int channel)
|
|
+{
|
|
+ int res = 0;
|
|
+ unsigned short status;
|
|
+
|
|
+ spi_access_bus(channel);
|
|
+ status = at91_dataflash_status();
|
|
+ spi_release_bus(channel);
|
|
+ if (status != 0xff) { /* no dataflash device there */
|
|
+ switch (status & 0x3c) {
|
|
+ case 0x0c: /* 0 0 1 1 */
|
|
+ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
|
|
+ break;
|
|
+ case 0x14: /* 0 1 0 1 */
|
|
+ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
|
|
+ break;
|
|
+ case 0x1c: /* 0 1 1 1 */
|
|
+ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
|
|
+ break;
|
|
+ case 0x24: /* 1 0 0 1 */
|
|
+ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
|
|
+ break;
|
|
+ case 0x2c: /* 1 0 1 1 */
|
|
+ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
|
|
+ break;
|
|
+ case 0x34: /* 1 1 0 1 */
|
|
+ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
|
|
+ break;
|
|
+ case 0x3c: /* 1 1 1 1 */
|
|
+ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
|
|
+ break;
|
|
+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
|
|
+// case 0x10: /* 0 1 0 0 */
|
|
+// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
|
|
+// break;
|
|
+ default:
|
|
+ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ return res;
|
|
+}
|
|
+
|
|
+static int __init at91_dataflash_init(void)
|
|
+{
|
|
+ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
|
|
+ if (!spi_transfer_desc)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ /* DataFlash (SPI chip select 0) */
|
|
+ at91_dataflash_detect(0);
|
|
+
|
|
+ if (machine_is_sweda_tms())
|
|
+ at91_dataflash_detect(1); /* DataFlash device (SPI chip select 1) */
|
|
+
|
|
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
|
|
+ /* DataFlash card (SPI chip select 3) */
|
|
+ at91_dataflash_detect(3);
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void __exit at91_dataflash_exit(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
|
|
+ if (mtd_devices[i]) {
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
+ del_mtd_partitions(mtd_devices[i]);
|
|
+#else
|
|
+ del_mtd_device(mtd_devices[i]);
|
|
+#endif
|
|
+ kfree(mtd_devices[i]->priv);
|
|
+ kfree(mtd_devices[i]);
|
|
+ }
|
|
+ }
|
|
+ nr_devices = 0;
|
|
+ kfree(spi_transfer_desc);
|
|
+}
|
|
+
|
|
+
|
|
+module_init(at91_dataflash_init);
|
|
+module_exit(at91_dataflash_exit);
|
|
+
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_AUTHOR("Andrew Victor");
|
|
+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
|
|
diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/mtd_dataflash.c linux-2.6/drivers/mtd/devices/mtd_dataflash.c
|
|
--- linux-2.6.24/drivers/mtd/devices/mtd_dataflash.c 2008-03-01 22:02:12.000000000 +0200
|
|
+++ linux-2.6/drivers/mtd/devices/mtd_dataflash.c 2007-12-31 10:44:31.000000000 +0200
|
|
@@ -420,7 +420,7 @@
|
|
status = dataflash_waitready(priv->spi);
|
|
|
|
/* Check result of the compare operation */
|
|
- if ((status & (1 << 6)) == 1) {
|
|
+ if (status & (1 << 6)) {
|
|
printk(KERN_ERR "%s: compare page %u, err %d\n",
|
|
spi->dev.bus_id, pageaddr, status);
|
|
remaining = 0;
|
|
diff -urN -x CVS linux-2.6.24/drivers/mtd/nand/Kconfig linux-2.6/drivers/mtd/nand/Kconfig
|
|
--- linux-2.6.24/drivers/mtd/nand/Kconfig 2008-03-01 22:02:12.000000000 +0200
|
|
+++ linux-2.6/drivers/mtd/nand/Kconfig 2008-03-04 21:14:54.000000000 +0200
|
|
@@ -279,6 +279,47 @@
|
|
Enables support for NAND Flash / Smart Media Card interface
|
|
on Atmel AT91 processors.
|
|
|
|
+choice
|
|
+ prompt "ECC management for NAND Flash / SmartMedia on AT91"
|
|
+ depends on MTD_NAND_AT91
|
|
+
|
|
+config MTD_NAND_AT91_ECC_SOFT
|
|
+ bool "Software ECC"
|
|
+ depends on MTD_NAND_AT91
|
|
+ help
|
|
+ Uses software ECC.
|
|
+
|
|
+ NB : hardware and software ECC schemes are incompatible.
|
|
+ If you switch from one to another, you'll have to erase your
|
|
+ mtd partition.
|
|
+
|
|
+config MTD_NAND_AT91_ECC_HW
|
|
+ bool "Hardware ECC"
|
|
+ depends on MTD_NAND_AT91 && (ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9)
|
|
+ help
|
|
+ Uses hardware ECC provided by the AT91 processor
|
|
+ instead of software ECC.
|
|
+ The hardware ECC controller is capable of single bit error
|
|
+ correction and 2-bit random detection per page.
|
|
+
|
|
+ NB : hardware and software ECC schemes are incompatible.
|
|
+ If you switch from one to another, you'll have to erase your
|
|
+ mtd partition.
|
|
+
|
|
+ If unsure, say Y
|
|
+
|
|
+config MTD_NAND_AT91_ECC_NONE
|
|
+ bool "No ECC (Testing Only)"
|
|
+ depends on MTD_NAND_AT91
|
|
+ help
|
|
+ No ECC will be used.
|
|
+ It's not a good idea and it should be reserved for testing
|
|
+ purpose only.
|
|
+
|
|
+ If unsure, say N
|
|
+
|
|
+endchoice
|
|
+
|
|
config MTD_NAND_CM_X270
|
|
tristate "Support for NAND Flash on CM-X270 modules"
|
|
depends on MTD_NAND && MACH_ARMCORE
|
|
diff -urN -x CVS linux-2.6.24/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd/nand/at91_nand.c
|
|
--- linux-2.6.24/drivers/mtd/nand/at91_nand.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/drivers/mtd/nand/at91_nand.c 2008-03-04 21:41:16.000000000 +0200
|
|
@@ -9,6 +9,15 @@
|
|
* Derived from drivers/mtd/spia.c
|
|
* Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
|
|
*
|
|
+ *
|
|
+ * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
|
|
+ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
|
|
+ *
|
|
+ * Derived from Das U-Boot source code
|
|
+ * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
|
|
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
|
|
+ *
|
|
+ *
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
@@ -28,12 +37,54 @@
|
|
#include <asm/hardware.h>
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
+#include <asm/arch/at91_ecc.h>
|
|
+
|
|
+#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
|
|
+#define hard_ecc 1
|
|
+#else
|
|
+#define hard_ecc 0
|
|
+#endif
|
|
+
|
|
+#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
|
|
+#define no_ecc 1
|
|
+#else
|
|
+#define no_ecc 0
|
|
+#endif
|
|
+
|
|
+/* Register access macros */
|
|
+#define ecc_readl(base, reg) __raw_readl(base + reg)
|
|
+#define ecc_writel(base, reg, value) __raw_writel((value), base + reg)
|
|
+
|
|
+
|
|
+/*
|
|
+ * OOB layout for large page size.
|
|
+ * bad block info is on bytes 0 and 1
|
|
+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
|
|
+ */
|
|
+static struct nand_ecclayout at91_oobinfo_large = {
|
|
+ .eccbytes = 4,
|
|
+ .eccpos = {60, 61, 62, 63},
|
|
+ .oobfree = { {2, 58} },
|
|
+};
|
|
+
|
|
+/*
|
|
+ * OOB layout for small page size
|
|
+ * bad block info is on bytes 4 and 5
|
|
+ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
|
|
+ */
|
|
+static struct nand_ecclayout at91_oobinfo_small = {
|
|
+ .eccbytes = 4,
|
|
+ .eccpos = {0, 1, 2, 3},
|
|
+ .oobfree = { {6, 10} },
|
|
+};
|
|
|
|
struct at91_nand_host {
|
|
struct nand_chip nand_chip;
|
|
struct mtd_info mtd;
|
|
void __iomem *io_base;
|
|
struct at91_nand_data *board;
|
|
+ struct device *dev;
|
|
+ void __iomem *ecc;
|
|
};
|
|
|
|
/*
|
|
@@ -82,10 +133,250 @@
|
|
at91_set_gpio_value(host->board->enable_pin, 1);
|
|
}
|
|
|
|
+/*
|
|
+ * write oob for small pages
|
|
+ */
|
|
+static int at91_nand_write_oob_512(struct mtd_info *mtd,
|
|
+ struct nand_chip *chip, int page)
|
|
+{
|
|
+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
|
|
+ int eccsize = chip->ecc.size, length = mtd->oobsize;
|
|
+ int len, pos, status = 0;
|
|
+ const uint8_t *bufpoi = chip->oob_poi;
|
|
+
|
|
+ pos = eccsize + chunk;
|
|
+
|
|
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
|
|
+ len = min_t(int, length, chunk);
|
|
+ chip->write_buf(mtd, bufpoi, len);
|
|
+ bufpoi += len;
|
|
+ length -= len;
|
|
+ if (length > 0)
|
|
+ chip->write_buf(mtd, bufpoi, length);
|
|
+
|
|
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
|
|
+ status = chip->waitfunc(mtd, chip);
|
|
+
|
|
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
|
|
+
|
|
+}
|
|
+
|
|
+/*
|
|
+ * read oob for small pages
|
|
+ */
|
|
+static int at91_nand_read_oob_512(struct mtd_info *mtd,
|
|
+ struct nand_chip *chip, int page, int sndcmd)
|
|
+{
|
|
+ if (sndcmd) {
|
|
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
|
|
+ sndcmd = 0;
|
|
+ }
|
|
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
|
|
+ return sndcmd;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Calculate HW ECC
|
|
+ *
|
|
+ * mtd: MTD block structure
|
|
+ * dat: raw data (unused)
|
|
+ * ecc_code: buffer for ECC
|
|
+ */
|
|
+static int at91_nand_calculate(struct mtd_info *mtd,
|
|
+ const u_char *dat, unsigned char *ecc_code)
|
|
+{
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
+ struct at91_nand_host *host = nand_chip->priv;
|
|
+ uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
|
|
+ unsigned int ecc_value;
|
|
+
|
|
+ /* get the first 2 ECC bytes */
|
|
+ ecc_value = ecc_readl(host->ecc, AT91_ECC_PR) & (AT91_ECC_BITADDR | AT91_ECC_WORDADDR);
|
|
+
|
|
+ ecc_code[eccpos[0]] = ecc_value & 0xFF;
|
|
+ ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
|
|
+
|
|
+ /* get the last 2 ECC bytes */
|
|
+ ecc_value = ecc_readl(host->ecc, AT91_ECC_NPR) & AT91_ECC_NPARITY;
|
|
+
|
|
+ ecc_code[eccpos[2]] = ecc_value & 0xFF;
|
|
+ ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * HW ECC read page function
|
|
+ *
|
|
+ * mtd: mtd info structure
|
|
+ * chip: nand chip info structure
|
|
+ * buf: buffer to store read data
|
|
+ */
|
|
+static int at91_nand_read_page(struct mtd_info *mtd,
|
|
+ struct nand_chip *chip, uint8_t *buf)
|
|
+{
|
|
+ int eccsize = chip->ecc.size;
|
|
+ int eccbytes = chip->ecc.bytes;
|
|
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
|
|
+ uint8_t *p = buf;
|
|
+ uint8_t *oob = chip->oob_poi;
|
|
+ uint8_t *ecc_pos;
|
|
+ int stat;
|
|
+
|
|
+ /* read the page */
|
|
+ chip->read_buf(mtd, p, eccsize);
|
|
+
|
|
+ /* move to ECC position if needed */
|
|
+ if (eccpos[0] != 0) {
|
|
+ /*
|
|
+ * This only works on large pages because the ECC controller
|
|
+ * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
|
|
+ * Anyway, for small pages, the eccpos[0] == 0
|
|
+ */
|
|
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
|
|
+ mtd->writesize + eccpos[0], -1);
|
|
+ }
|
|
+
|
|
+ /* the ECC controller needs to read the ECC just after the data */
|
|
+ ecc_pos = oob + eccpos[0];
|
|
+ chip->read_buf(mtd, ecc_pos, eccbytes);
|
|
+
|
|
+ /* check if there's an error */
|
|
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
|
|
+
|
|
+ if (stat < 0)
|
|
+ mtd->ecc_stats.failed++;
|
|
+ else
|
|
+ mtd->ecc_stats.corrected += stat;
|
|
+
|
|
+ /* get back to oob start (end of page) */
|
|
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
|
|
+
|
|
+ /* read the oob */
|
|
+ chip->read_buf(mtd, oob, mtd->oobsize);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * HW ECC Correction
|
|
+ *
|
|
+ * mtd: MTD block structure
|
|
+ * dat: raw data read from the chip
|
|
+ * read_ecc: ECC from the chip (unused)
|
|
+ * isnull: unused
|
|
+ *
|
|
+ * Detect and correct a 1 bit error for a page
|
|
+ */
|
|
+static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
|
|
+ u_char *read_ecc, u_char *isnull)
|
|
+{
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
+ struct at91_nand_host *host = nand_chip->priv;
|
|
+ unsigned int ecc_status;
|
|
+ unsigned int ecc_word, ecc_bit;
|
|
+
|
|
+ /* get the status from the Status Register */
|
|
+ ecc_status = ecc_readl(host->ecc, AT91_ECC_SR);
|
|
+
|
|
+ /* if there's no error */
|
|
+ if (likely(!(ecc_status & AT91_ECC_RECERR)))
|
|
+ return 0;
|
|
+
|
|
+ /* get error bit offset (4 bits) */
|
|
+ ecc_bit = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_BITADDR;
|
|
+ /* get word address (12 bits) */
|
|
+ ecc_word = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_WORDADDR;
|
|
+ ecc_word >>= 4;
|
|
+
|
|
+ /* if there are multiple errors */
|
|
+ if (ecc_status & AT91_ECC_MULERR) {
|
|
+ /* Check if it is a freshly erased block (filled with 0xff) */
|
|
+ if ((ecc_bit == AT91_ECC_BITADDR)
|
|
+ && (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
|
|
+ /* the block has just been erased, return OK */
|
|
+ return 0;
|
|
+ }
|
|
+ /*
|
|
+ * It doesn't seems to be a freshly-erased block.
|
|
+ * We can't correct so many errors.
|
|
+ */
|
|
+ dev_dbg(host->dev, "at91_nand : multiple errors detected."
|
|
+ " Unable to correct.\n");
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ /* if there's a single bit error : we can correct it */
|
|
+ if (ecc_status & AT91_ECC_ECCERR) {
|
|
+ /*
|
|
+ * There's nothing much to do here.
|
|
+ * The bit error is on the ECC itself.
|
|
+ */
|
|
+ dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
|
|
+ " Nothing to correct\n");
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ dev_dbg(host->dev, "at91_nand : one bit error on data."
|
|
+ " (word offset in the page :"
|
|
+ " 0x%x bit offset : 0x%x)\n",
|
|
+ ecc_word, ecc_bit);
|
|
+ /* correct the error */
|
|
+ if (nand_chip->options & NAND_BUSWIDTH_16) {
|
|
+ /* 16 bits words */
|
|
+ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
|
|
+ } else {
|
|
+ /* 8 bits words */
|
|
+ dat[ecc_word] ^= (1 << ecc_bit);
|
|
+ }
|
|
+ dev_dbg(host->dev, "at91_nand : error corrected\n");
|
|
+ return 1;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Enable HW ECC : unsused
|
|
+ */
|
|
+static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
|
|
+
|
|
+/*
|
|
+ * Over-ride the standard functions with our optimized versions.
|
|
+ * We can use read/write blocks to move data to/from the controller.
|
|
+ */
|
|
+static void at91_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
|
|
+{
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
+
|
|
+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
|
|
+}
|
|
+
|
|
+static void at91_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
|
|
+{
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
+
|
|
+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
|
|
+}
|
|
+
|
|
+static void at91_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
|
|
+{
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
+
|
|
+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
|
|
+}
|
|
+
|
|
+static void at91_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
|
|
+{
|
|
+ struct nand_chip *nand_chip = mtd->priv;
|
|
+
|
|
+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
|
|
+}
|
|
+
|
|
+
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
-const char *part_probes[] = { "cmdlinepart", NULL };
|
|
+static const char *part_probes[] = { "cmdlinepart", NULL };
|
|
#endif
|
|
|
|
+static char* ecc_modes[] __initdata = { "No", "Software", "Hardware" };
|
|
+
|
|
/*
|
|
* Probe for the NAND device.
|
|
*/
|
|
@@ -94,6 +385,8 @@
|
|
struct at91_nand_host *host;
|
|
struct mtd_info *mtd;
|
|
struct nand_chip *nand_chip;
|
|
+ struct resource *regs;
|
|
+ struct resource *mem;
|
|
int res;
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
@@ -108,8 +401,13 @@
|
|
return -ENOMEM;
|
|
}
|
|
|
|
- host->io_base = ioremap(pdev->resource[0].start,
|
|
- pdev->resource[0].end - pdev->resource[0].start + 1);
|
|
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!mem) {
|
|
+ printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
|
|
+ return -ENXIO;
|
|
+ }
|
|
+
|
|
+ host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
|
|
if (host->io_base == NULL) {
|
|
printk(KERN_ERR "at91_nand: ioremap failed\n");
|
|
kfree(host);
|
|
@@ -119,6 +417,7 @@
|
|
mtd = &host->mtd;
|
|
nand_chip = &host->nand_chip;
|
|
host->board = pdev->dev.platform_data;
|
|
+ host->dev = &pdev->dev;
|
|
|
|
nand_chip->priv = host; /* link the private data structures */
|
|
mtd->priv = nand_chip;
|
|
@@ -132,11 +431,40 @@
|
|
if (host->board->rdy_pin)
|
|
nand_chip->dev_ready = at91_nand_device_ready;
|
|
|
|
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
+ if (!regs && hard_ecc) {
|
|
+ printk(KERN_ERR "at91_nand: can't get I/O resource "
|
|
+ "regs\nFalling back on software ECC\n");
|
|
+ }
|
|
+
|
|
nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
|
|
+ if (no_ecc)
|
|
+ nand_chip->ecc.mode = NAND_ECC_NONE;
|
|
+ if (hard_ecc && regs) {
|
|
+ host->ecc = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
|
|
+ host->ecc += regs->start;
|
|
+
|
|
+ nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME; /* HW SYNDROME ECC */
|
|
+ nand_chip->ecc.calculate = at91_nand_calculate; /* function called after a write */
|
|
+ nand_chip->ecc.correct = at91_nand_correct; /* function called after a read */
|
|
+ nand_chip->ecc.hwctl = at91_nand_hwctl; /* unused */
|
|
+ nand_chip->ecc.read_page = at91_nand_read_page; /* read page function */
|
|
+ nand_chip->ecc.bytes = 4; /* 4 ECC bytes for any page size */
|
|
+ nand_chip->ecc.prepad = 0;
|
|
+ nand_chip->ecc.postpad = 0;
|
|
+ }
|
|
+
|
|
nand_chip->chip_delay = 20; /* 20us command delay time */
|
|
|
|
- if (host->board->bus_width_16) /* 16-bit bus width */
|
|
+ if (host->board->bus_width_16) { /* 16-bit bus width */
|
|
nand_chip->options |= NAND_BUSWIDTH_16;
|
|
+ nand_chip->read_buf = at91_read_buf16;
|
|
+ nand_chip->write_buf = at91_write_buf16;
|
|
+ }
|
|
+ else {
|
|
+ nand_chip->read_buf = at91_read_buf8;
|
|
+ nand_chip->write_buf = at91_write_buf8;
|
|
+ }
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
at91_nand_enable(host);
|
|
@@ -149,21 +477,73 @@
|
|
}
|
|
}
|
|
|
|
- /* Scan to find existance of the device */
|
|
- if (nand_scan(mtd, 1)) {
|
|
+ /* first scan to find the device and get the page size */
|
|
+ if (nand_scan_ident(mtd, 1)) {
|
|
+ res = -ENXIO;
|
|
+ goto out;
|
|
+ }
|
|
+
|
|
+ if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
|
|
+ /* ECC is calculated for the whole page (1 step) */
|
|
+ nand_chip->ecc.size = mtd->writesize;
|
|
+
|
|
+ /* set ECC page size and oob layout */
|
|
+ switch (mtd->writesize) {
|
|
+ case 512:
|
|
+ nand_chip->ecc.layout = &at91_oobinfo_small;
|
|
+ nand_chip->ecc.read_oob = at91_nand_read_oob_512;
|
|
+ nand_chip->ecc.write_oob = at91_nand_write_oob_512;
|
|
+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_528);
|
|
+ break;
|
|
+ case 1024:
|
|
+ nand_chip->ecc.layout = &at91_oobinfo_large;
|
|
+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_1056);
|
|
+ break;
|
|
+ case 2048:
|
|
+ nand_chip->ecc.layout = &at91_oobinfo_large;
|
|
+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_2112);
|
|
+ break;
|
|
+ case 4096:
|
|
+ nand_chip->ecc.layout = &at91_oobinfo_large;
|
|
+ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_4224);
|
|
+ break;
|
|
+ default:
|
|
+ /*
|
|
+ * Page size not supported by HW ECC.
|
|
+ * So switch back to soft ECC
|
|
+ */
|
|
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
|
|
+ nand_chip->ecc.calculate = NULL;
|
|
+ nand_chip->ecc.correct = NULL;
|
|
+ nand_chip->ecc.hwctl = NULL;
|
|
+ nand_chip->ecc.read_page = NULL;
|
|
+ nand_chip->ecc.postpad = 0;
|
|
+ nand_chip->ecc.prepad = 0;
|
|
+ nand_chip->ecc.bytes = 0;
|
|
+ break;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ printk(KERN_INFO "AT91 NAND: %i-bit, %s ECC\n",
|
|
+ (nand_chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
|
|
+ ecc_modes[nand_chip->ecc.mode]
|
|
+ );
|
|
+
|
|
+ /* second phase scan */
|
|
+ if (nand_scan_tail(mtd)) {
|
|
res = -ENXIO;
|
|
goto out;
|
|
}
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
- if (host->board->partition_info)
|
|
- partitions = host->board->partition_info(mtd->size, &num_partitions);
|
|
#ifdef CONFIG_MTD_CMDLINE_PARTS
|
|
- else {
|
|
- mtd->name = "at91_nand";
|
|
- num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
|
|
- }
|
|
+ mtd->name = "at91_nand";
|
|
+ num_partitions = parse_mtd_partitions(mtd, part_probes,
|
|
+ &partitions, 0);
|
|
#endif
|
|
+ if (num_partitions <= 0 && host->board->partition_info)
|
|
+ partitions = host->board->partition_info(mtd->size,
|
|
+ &num_partitions);
|
|
|
|
if ((!partitions) || (num_partitions == 0)) {
|
|
printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
|
|
@@ -179,8 +559,11 @@
|
|
if (!res)
|
|
return res;
|
|
|
|
+#ifdef CONFIG_MTD_PARTITIONS
|
|
release:
|
|
+#endif
|
|
nand_release(mtd);
|
|
+
|
|
out:
|
|
at91_nand_disable(host);
|
|
platform_set_drvdata(pdev, NULL);
|
|
@@ -192,7 +575,7 @@
|
|
/*
|
|
* Remove a NAND device.
|
|
*/
|
|
-static int __devexit at91_nand_remove(struct platform_device *pdev)
|
|
+static int __exit at91_nand_remove(struct platform_device *pdev)
|
|
{
|
|
struct at91_nand_host *host = platform_get_drvdata(pdev);
|
|
struct mtd_info *mtd = &host->mtd;
|
|
@@ -208,8 +591,7 @@
|
|
}
|
|
|
|
static struct platform_driver at91_nand_driver = {
|
|
- .probe = at91_nand_probe,
|
|
- .remove = at91_nand_remove,
|
|
+ .remove = __exit_p(at91_nand_remove),
|
|
.driver = {
|
|
.name = "at91_nand",
|
|
.owner = THIS_MODULE,
|
|
@@ -218,7 +600,7 @@
|
|
|
|
static int __init at91_nand_init(void)
|
|
{
|
|
- return platform_driver_register(&at91_nand_driver);
|
|
+ return platform_driver_probe(&at91_nand_driver, at91_nand_probe);
|
|
}
|
|
|
|
|
|
@@ -233,4 +615,4 @@
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Rick Bronson");
|
|
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
|
|
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9");
|
|
diff -urN -x CVS linux-2.6.24/drivers/net/Kconfig linux-2.6/drivers/net/Kconfig
|
|
--- linux-2.6.24/drivers/net/Kconfig 2008-03-01 22:02:12.000000000 +0200
|
|
+++ linux-2.6/drivers/net/Kconfig 2008-02-18 22:56:04.000000000 +0200
|
|
@@ -212,7 +212,7 @@
|
|
|
|
config MACB
|
|
tristate "Atmel MACB support"
|
|
- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
|
|
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
|
|
select PHYLIB
|
|
help
|
|
The Atmel MACB ethernet interface is found on many AT32 and AT91
|
|
diff -urN -x CVS linux-2.6.24/drivers/net/arm/at91_ether.c linux-2.6/drivers/net/arm/at91_ether.c
|
|
--- linux-2.6.24/drivers/net/arm/at91_ether.c 2008-03-01 22:02:12.000000000 +0200
|
|
+++ linux-2.6/drivers/net/arm/at91_ether.c 2008-03-04 22:17:26.000000000 +0200
|
|
@@ -220,7 +220,7 @@
|
|
if (!(phy & (1 << 0)))
|
|
goto done;
|
|
}
|
|
- else if (lp->phy_type == MII_KS8721_ID) {
|
|
+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) {
|
|
read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
|
|
if (!(phy & ((1 << 2) | 1)))
|
|
goto done;
|
|
@@ -286,7 +286,7 @@
|
|
dsintr = (1 << 15) | ( 1 << 14);
|
|
write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
|
|
}
|
|
- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
|
|
+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */
|
|
dsintr = (1 << 10) | ( 1 << 8);
|
|
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
|
|
}
|
|
@@ -341,7 +341,7 @@
|
|
dsintr = ~(1 << 14);
|
|
write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
|
|
}
|
|
- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
|
|
+ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */
|
|
read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
|
|
dsintr = ~((1 << 10) | (1 << 8));
|
|
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
|
|
@@ -384,7 +384,7 @@
|
|
/* Wait until PHY reset is complete */
|
|
do {
|
|
read_phy(lp->phy_address, MII_BMCR, &bmcr);
|
|
- } while (!(bmcr && BMCR_RESET));
|
|
+ } while (!(bmcr & BMCR_RESET));
|
|
|
|
disable_mdi();
|
|
spin_unlock_irq(&lp->lock);
|
|
@@ -978,15 +978,22 @@
|
|
struct net_device *dev;
|
|
struct at91_private *lp;
|
|
unsigned int val;
|
|
- int res;
|
|
+ struct resource *res;
|
|
+ int ret;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
dev = alloc_etherdev(sizeof(struct at91_private));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
- dev->base_addr = AT91_VA_BASE_EMAC;
|
|
- dev->irq = AT91RM9200_ID_EMAC;
|
|
+ /* Get I/O base address and IRQ */
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!res) {
|
|
+ free_netdev(dev);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+ dev->base_addr = res->start;
|
|
+ dev->irq = platform_get_irq(pdev, 0);
|
|
|
|
/* Install the interrupt handler */
|
|
if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
|
|
@@ -1043,7 +1050,9 @@
|
|
} else if (machine_is_csb337()) {
|
|
/* mix link activity status into LED2 link state */
|
|
write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
|
|
- }
|
|
+ } else if (machine_is_ecbat91())
|
|
+ write_phy(phy_address, MII_LEDCTRL_REG, 0x156A);
|
|
+
|
|
disable_mdi();
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
@@ -1058,12 +1067,12 @@
|
|
lp->phy_address = phy_address; /* MDI address of PHY */
|
|
|
|
/* Register the network interface */
|
|
- res = register_netdev(dev);
|
|
- if (res) {
|
|
+ ret = register_netdev(dev);
|
|
+ if (ret) {
|
|
free_irq(dev->irq, dev);
|
|
free_netdev(dev);
|
|
dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
|
|
- return res;
|
|
+ return ret;
|
|
}
|
|
|
|
/* Determine current link speed */
|
|
@@ -1101,6 +1110,8 @@
|
|
printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
|
|
else if (phy_type == MII_AC101L_ID)
|
|
printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
|
|
+ else if (phy_type == MII_KSZ8041_ID)
|
|
+ printk(KERN_INFO "%s: Micrel KSZ8041 PHY\n", dev->name);
|
|
else if (phy_type == MII_KS8721_ID)
|
|
printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
|
|
else if (phy_type == MII_T78Q21x3_ID)
|
|
@@ -1146,6 +1157,7 @@
|
|
case MII_DP83847_ID: /* National Semiconductor DP83847: */
|
|
case MII_DP83848_ID: /* National Semiconductor DP83848: */
|
|
case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
|
|
+ case MII_KSZ8041_ID: /* Micrel KSZ8041: PHY_ID1 = 0x22, PHY_ID2 = 0x1512 */
|
|
case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
|
|
case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
|
|
case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
|
|
diff -urN -x CVS linux-2.6.24/drivers/net/arm/at91_ether.h linux-2.6/drivers/net/arm/at91_ether.h
|
|
--- linux-2.6.24/drivers/net/arm/at91_ether.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/drivers/net/arm/at91_ether.h 2008-01-01 15:13:39.000000000 +0200
|
|
@@ -48,6 +48,9 @@
|
|
/* Altima AC101L PHY */
|
|
#define MII_AC101L_ID 0x00225520
|
|
|
|
+/* Micrel KSZ8041 PHY */
|
|
+#define MII_KSZ8041_ID 0x00221510
|
|
+
|
|
/* Micrel KS8721 PHY */
|
|
#define MII_KS8721_ID 0x00221610
|
|
|
|
diff -urN -x CVS linux-2.6.24/drivers/rtc/Kconfig linux-2.6/drivers/rtc/Kconfig
|
|
--- linux-2.6.24/drivers/rtc/Kconfig 2008-03-01 22:02:13.000000000 +0200
|
|
+++ linux-2.6/drivers/rtc/Kconfig 2008-02-24 18:13:06.000000000 +0200
|
|
@@ -440,10 +440,47 @@
|
|
AT32AP700x family processors.
|
|
|
|
config RTC_DRV_AT91RM9200
|
|
- tristate "AT91RM9200"
|
|
- depends on ARCH_AT91RM9200
|
|
+ tristate "AT91RM9200 or AT91SAM9RL"
|
|
+ depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL
|
|
help
|
|
- Driver for the Atmel AT91RM9200's internal RTC (Realtime Clock).
|
|
+ Driver for the internal RTC (Realtime Clock) module found on
|
|
+ Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips
|
|
+ this is powered by the backup power supply.
|
|
+
|
|
+config RTC_DRV_AT91SAM9
|
|
+ tristate "AT91SAM9x"
|
|
+ depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
|
|
+ help
|
|
+ RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
|
|
+ These timers are powered by the backup power supply (such as a
|
|
+ small coin cell battery), but do not need to be used as RTCs.
|
|
+
|
|
+ (On AT91SAM9rl chips you probably want to use the dedicated RTC
|
|
+ module and leave the RTT available for other uses.)
|
|
+
|
|
+config RTC_DRV_AT91SAM9_RTT
|
|
+ int
|
|
+ range 0 1
|
|
+ default 0
|
|
+ prompt "RTT module Number" if ARCH_AT91SAM9263
|
|
+ depends on RTC_DRV_AT91SAM9
|
|
+ help
|
|
+ More than one RTT module is available. You can choose which
|
|
+ one will be used as an RTC. The default of zero is normally
|
|
+ OK to use, though some systems use that for non-RTC purposes.
|
|
+
|
|
+config RTC_DRV_AT91SAM9_GPBR
|
|
+ int
|
|
+ range 0 3 if !ARCH_AT91SAM9263
|
|
+ range 0 15 if ARCH_AT91SAM9263
|
|
+ default 0
|
|
+ prompt "Backup Register Number"
|
|
+ depends on RTC_DRV_AT91SAM9
|
|
+ help
|
|
+ The RTC driver needs to use one of the General Purpose Backup
|
|
+ Registers (GPBRs) as well as the RTT. You can choose which one
|
|
+ will be used. The default of zero is normally OK to use, but
|
|
+ on some systems other software needs to use that register.
|
|
|
|
config RTC_DRV_BFIN
|
|
tristate "Blackfin On-Chip RTC"
|
|
diff -urN -x CVS linux-2.6.24/drivers/rtc/Makefile linux-2.6/drivers/rtc/Makefile
|
|
--- linux-2.6.24/drivers/rtc/Makefile 2008-03-01 22:02:13.000000000 +0200
|
|
+++ linux-2.6/drivers/rtc/Makefile 2007-12-31 10:44:31.000000000 +0200
|
|
@@ -19,6 +19,7 @@
|
|
|
|
obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
|
|
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
|
|
+obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
|
|
obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
|
|
obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
|
|
obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o
|
|
diff -urN -x CVS linux-2.6.24/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc/rtc-at91rm9200.c
|
|
--- linux-2.6.24/drivers/rtc/rtc-at91rm9200.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/drivers/rtc/rtc-at91rm9200.c 2008-02-25 22:32:47.000000000 +0200
|
|
@@ -307,12 +307,6 @@
|
|
return ret;
|
|
}
|
|
|
|
- /* cpu init code should really have flagged this device as
|
|
- * being wake-capable; if it didn't, do that here.
|
|
- */
|
|
- if (!device_can_wakeup(&pdev->dev))
|
|
- device_init_wakeup(&pdev->dev, 1);
|
|
-
|
|
rtc = rtc_device_register(pdev->name, &pdev->dev,
|
|
&at91_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(rtc)) {
|
|
diff -urN -x CVS linux-2.6.24/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/rtc-at91sam9.c
|
|
--- linux-2.6.24/drivers/rtc/rtc-at91sam9.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/drivers/rtc/rtc-at91sam9.c 2008-03-01 21:54:39.000000000 +0200
|
|
@@ -0,0 +1,526 @@
|
|
+/*
|
|
+ * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
|
|
+ *
|
|
+ * (C) 2007 Michel Benoit
|
|
+ *
|
|
+ * Based on rtc-at91rm9200.c by Rick Bronson
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version
|
|
+ * 2 of the License, or (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/time.h>
|
|
+#include <linux/rtc.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/ioctl.h>
|
|
+
|
|
+#include <asm/mach/time.h>
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/at91_rtt.h>
|
|
+
|
|
+
|
|
+/*
|
|
+ * This driver uses two configurable hardware resources that live in the
|
|
+ * AT91SAM9 backup power domain (intended to be powered at all times)
|
|
+ * to implement the Real Time Clock interfaces
|
|
+ *
|
|
+ * - A "Real-time Timer" (RTT) counts up in seconds from a base time.
|
|
+ * We can't assign the counter value (CRTV) ... but we can reset it.
|
|
+ *
|
|
+ * - One of the "General Purpose Backup Registers" (GPBRs) holds the
|
|
+ * base time, normally an offset from the beginning of the POSIX
|
|
+ * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the
|
|
+ * local timezone's offset.
|
|
+ *
|
|
+ * The RTC's value is the RTT counter plus that offset. The RTC's alarm
|
|
+ * is likewise a base (ALMV) plus that offset.
|
|
+ *
|
|
+ * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
|
|
+ * choose from, or a "real" RTC module. All systems have multiple GPBR
|
|
+ * registers available, likewise usable for more than "RTC" support.
|
|
+ */
|
|
+
|
|
+/*
|
|
+ * We store ALARM_DISABLED in ALMV to record that no alarm is set.
|
|
+ * It's also the reset value for that field.
|
|
+ */
|
|
+#define ALARM_DISABLED ((u32)~0)
|
|
+
|
|
+
|
|
+struct sam9_rtc {
|
|
+ void __iomem *rtt;
|
|
+ struct rtc_device *rtcdev;
|
|
+ u32 imr;
|
|
+};
|
|
+
|
|
+#define rtt_readl(rtc, field) \
|
|
+ __raw_readl((rtc)->rtt + AT91_RTT_ ## field)
|
|
+#define rtt_writel(rtc, field, val) \
|
|
+ __raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field)
|
|
+
|
|
+#define gpbr_readl(rtc) \
|
|
+ at91_sys_read(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR)
|
|
+#define gpbr_writel(rtc, val) \
|
|
+ at91_sys_write(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR, (val))
|
|
+
|
|
+/*
|
|
+ * Read current time and date in RTC
|
|
+ */
|
|
+static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
|
|
+{
|
|
+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
+ u32 secs, secs2;
|
|
+ u32 offset;
|
|
+
|
|
+ /* read current time offset */
|
|
+ offset = gpbr_readl(rtc);
|
|
+ if (offset == 0)
|
|
+ return -EILSEQ;
|
|
+
|
|
+ /* reread the counter to help sync the two clock domains */
|
|
+ secs = rtt_readl(rtc, VR);
|
|
+ secs2 = rtt_readl(rtc, VR);
|
|
+ if (secs != secs2)
|
|
+ secs = rtt_readl(rtc, VR);
|
|
+
|
|
+ rtc_time_to_tm(offset + secs, tm);
|
|
+
|
|
+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
|
|
+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
|
|
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Set current time and date in RTC
|
|
+ */
|
|
+static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
|
|
+{
|
|
+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
+ int err;
|
|
+ u32 offset, alarm, mr;
|
|
+ unsigned long secs;
|
|
+
|
|
+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
|
|
+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
|
|
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
+
|
|
+ err = rtc_tm_to_time(tm, &secs);
|
|
+ if (err != 0)
|
|
+ return err;
|
|
+
|
|
+ mr = rtt_readl(rtc, MR);
|
|
+
|
|
+ /* disable interrupts */
|
|
+ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
|
|
+
|
|
+ /* read current time offset */
|
|
+ offset = gpbr_readl(rtc);
|
|
+
|
|
+ /* store the new base time in a battery backup register */
|
|
+ secs += 1;
|
|
+ gpbr_writel(rtc, secs);
|
|
+
|
|
+ /* adjust the alarm time for the new base */
|
|
+ alarm = rtt_readl(rtc, AR);
|
|
+ if (alarm != ALARM_DISABLED) {
|
|
+ if (offset > secs) {
|
|
+ /* time jumped backwards, increase time until alarm */
|
|
+ alarm += (offset - secs);
|
|
+ } else if ((alarm + offset) > secs) {
|
|
+ /* time jumped forwards, decrease time until alarm */
|
|
+ alarm -= (secs - offset);
|
|
+ } else {
|
|
+ /* time jumped past the alarm, disable alarm */
|
|
+ alarm = ALARM_DISABLED;
|
|
+ mr &= ~AT91_RTT_ALMIEN;
|
|
+ }
|
|
+ rtt_writel(rtc, AR, alarm);
|
|
+ }
|
|
+
|
|
+ /* reset the timer, and re-enable interrupts */
|
|
+ rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Read alarm time and date in RTC
|
|
+ */
|
|
+static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
+{
|
|
+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
+ struct rtc_time *tm = &alrm->time;
|
|
+ u32 alarm = rtt_readl(rtc, AR);
|
|
+ u32 offset;
|
|
+
|
|
+ offset = gpbr_readl(rtc);
|
|
+ if (offset == 0)
|
|
+ return -EILSEQ;
|
|
+
|
|
+ memset(alrm, 0, sizeof(alrm));
|
|
+ if (alarm != ALARM_DISABLED && offset != 0) {
|
|
+ rtc_time_to_tm(offset + alarm, tm);
|
|
+
|
|
+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
|
|
+ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
|
|
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
+
|
|
+ if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
|
|
+ alrm->enabled = 1;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Set alarm time and date in RTC
|
|
+ */
|
|
+static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
+{
|
|
+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
+ struct rtc_time *tm = &alrm->time;
|
|
+ unsigned long secs;
|
|
+ u32 offset;
|
|
+ u32 mr;
|
|
+ int err;
|
|
+
|
|
+ err = rtc_tm_to_time(tm, &secs);
|
|
+ if (err != 0)
|
|
+ return err;
|
|
+
|
|
+ offset = gpbr_readl(rtc);
|
|
+ if (offset == 0) {
|
|
+ /* time is not set */
|
|
+ return -EILSEQ;
|
|
+ }
|
|
+ mr = rtt_readl(rtc, MR);
|
|
+ rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
|
|
+
|
|
+ /* alarm in the past? finish and leave disabled */
|
|
+ if (secs <= offset) {
|
|
+ rtt_writel(rtc, AR, ALARM_DISABLED);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ /* else set alarm and maybe enable it */
|
|
+ rtt_writel(rtc, AR, secs - offset);
|
|
+ if (alrm->enabled)
|
|
+ rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
|
|
+
|
|
+ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
|
|
+ tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
|
|
+ tm->tm_min, tm->tm_sec);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Handle commands from user-space
|
|
+ */
|
|
+static int at91_rtc_ioctl(struct device *dev, unsigned int cmd,
|
|
+ unsigned long arg)
|
|
+{
|
|
+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
+ int ret = 0;
|
|
+ u32 mr = rtt_readl(rtc, MR);
|
|
+
|
|
+ dev_dbg(dev, "ioctl: cmd=%08x, arg=%08lx, mr %08x\n", cmd, arg, mr);
|
|
+
|
|
+ switch (cmd) {
|
|
+ case RTC_AIE_OFF: /* alarm off */
|
|
+ rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
|
|
+ break;
|
|
+ case RTC_AIE_ON: /* alarm on */
|
|
+ rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
|
|
+ break;
|
|
+ case RTC_UIE_OFF: /* update off */
|
|
+ rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
|
|
+ break;
|
|
+ case RTC_UIE_ON: /* update on */
|
|
+ rtt_writel(rtc, MR, mr | AT91_RTT_RTTINCIEN);
|
|
+ break;
|
|
+ default:
|
|
+ ret = -ENOIOCTLCMD;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Provide additional RTC information in /proc/driver/rtc
|
|
+ */
|
|
+static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
|
|
+{
|
|
+ struct sam9_rtc *rtc = dev_get_drvdata(dev);
|
|
+ u32 mr = mr = rtt_readl(rtc, MR);
|
|
+
|
|
+ seq_printf(seq, "update_IRQ\t: %s\n",
|
|
+ (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * IRQ handler for the RTC
|
|
+ */
|
|
+static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
|
|
+{
|
|
+ struct sam9_rtc *rtc = _rtc;
|
|
+ u32 sr, mr;
|
|
+ unsigned long events = 0;
|
|
+
|
|
+ /* Shared interrupt may be for another device. Note: reading
|
|
+ * SR clears it, so we must only read it in this irq handler!
|
|
+ */
|
|
+ mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
|
|
+ sr = rtt_readl(rtc, SR) & mr;
|
|
+ if (!sr)
|
|
+ return IRQ_NONE;
|
|
+
|
|
+ /* alarm status */
|
|
+ if (sr & AT91_RTT_ALMS)
|
|
+ events |= (RTC_AF | RTC_IRQF);
|
|
+
|
|
+ /* timer update/increment */
|
|
+ if (sr & AT91_RTT_RTTINC)
|
|
+ events |= (RTC_UF | RTC_IRQF);
|
|
+
|
|
+ rtc_update_irq(rtc->rtcdev, 1, events);
|
|
+
|
|
+ pr_debug("%s: num=%ld, events=0x%02lx\n", __FUNCTION__,
|
|
+ events >> 8, events & 0x000000FF);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static const struct rtc_class_ops at91_rtc_ops = {
|
|
+ .ioctl = at91_rtc_ioctl,
|
|
+ .read_time = at91_rtc_readtime,
|
|
+ .set_time = at91_rtc_settime,
|
|
+ .read_alarm = at91_rtc_readalarm,
|
|
+ .set_alarm = at91_rtc_setalarm,
|
|
+ .proc = at91_rtc_proc,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * Initialize and install RTC driver
|
|
+ */
|
|
+static int __init at91_rtc_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct resource *r;
|
|
+ struct sam9_rtc *rtc;
|
|
+ int ret;
|
|
+ u32 mr;
|
|
+
|
|
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (!r)
|
|
+ return -ENODEV;
|
|
+
|
|
+ rtc = kzalloc(sizeof *rtc, GFP_KERNEL);
|
|
+ if (!rtc)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ platform_set_drvdata(pdev, rtc);
|
|
+ rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
|
|
+ rtc->rtt += r->start;
|
|
+
|
|
+ mr = rtt_readl(rtc, MR);
|
|
+
|
|
+ /* unless RTT is counting at 1 Hz, re-initialize it */
|
|
+ if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) {
|
|
+ mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES);
|
|
+ gpbr_writel(rtc, 0);
|
|
+ }
|
|
+
|
|
+ /* disable all interrupts (same as on shutdown path) */
|
|
+ mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
|
|
+ rtt_writel(rtc, MR, mr);
|
|
+
|
|
+ rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev,
|
|
+ &at91_rtc_ops, THIS_MODULE);
|
|
+ if (IS_ERR(rtc->rtcdev)) {
|
|
+ ret = PTR_ERR(rtc->rtcdev);
|
|
+ goto fail;
|
|
+ }
|
|
+
|
|
+ /* register irq handler after we know what name we'll use */
|
|
+ ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
|
|
+ IRQF_DISABLED | IRQF_SHARED,
|
|
+ rtc->rtcdev->dev.bus_id, rtc);
|
|
+ if (ret) {
|
|
+ dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS);
|
|
+ rtc_device_unregister(rtc->rtcdev);
|
|
+ goto fail;
|
|
+ }
|
|
+
|
|
+ /* NOTE: sam9260 rev A silicon has a ROM bug which resets the
|
|
+ * RTT on at least some reboots. If you have that chip, you must
|
|
+ * initialize the time from some external source like a GPS, wall
|
|
+ * clock, discrete RTC, etc
|
|
+ */
|
|
+
|
|
+ if (gpbr_readl(rtc) == 0)
|
|
+ dev_warn(&pdev->dev, "%s: SET TIME!\n",
|
|
+ rtc->rtcdev->dev.bus_id);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+fail:
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ kfree(rtc);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Disable and remove the RTC driver
|
|
+ */
|
|
+static int __exit at91_rtc_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
|
|
+ u32 mr = rtt_readl(rtc, MR);
|
|
+
|
|
+ /* disable all interrupts */
|
|
+ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
|
|
+ free_irq(AT91_ID_SYS, rtc);
|
|
+
|
|
+ rtc_device_unregister(rtc->rtcdev);
|
|
+
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ kfree(rtc);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void at91_rtc_shutdown(struct platform_device *pdev)
|
|
+{
|
|
+ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
|
|
+ u32 mr = rtt_readl(rtc, MR);
|
|
+
|
|
+ rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
|
|
+ rtt_writel(rtc, MR, mr & ~rtc->imr);
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+
|
|
+/* AT91SAM9 RTC Power management control */
|
|
+
|
|
+static int at91_rtc_suspend(struct platform_device *pdev,
|
|
+ pm_message_t state)
|
|
+{
|
|
+ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
|
|
+ u32 mr = rtt_readl(rtc, MR);
|
|
+
|
|
+ /*
|
|
+ * This IRQ is shared with DBGU and other hardware which isn't
|
|
+ * necessarily a wakeup event source.
|
|
+ */
|
|
+ rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
|
|
+ if (rtc->imr) {
|
|
+ if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) {
|
|
+ enable_irq_wake(AT91_ID_SYS);
|
|
+ /* don't let RTTINC cause wakeups */
|
|
+ if (mr & AT91_RTT_RTTINCIEN)
|
|
+ rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
|
|
+ } else
|
|
+ rtt_writel(rtc, MR, mr & ~rtc->imr);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int at91_rtc_resume(struct platform_device *pdev)
|
|
+{
|
|
+ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
|
|
+ u32 mr;
|
|
+
|
|
+ if (rtc->imr) {
|
|
+ if (device_may_wakeup(&pdev->dev))
|
|
+ disable_irq_wake(AT91_ID_SYS);
|
|
+ mr = rtt_readl(rtc, MR);
|
|
+ rtt_writel(rtc, MR, mr | rtc->imr);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+#else
|
|
+#define at91_rtc_suspend NULL
|
|
+#define at91_rtc_resume NULL
|
|
+#endif
|
|
+
|
|
+static struct platform_driver at91_rtc_driver = {
|
|
+ .driver.name = "rtc-at91sam9",
|
|
+ .driver.owner = THIS_MODULE,
|
|
+ .remove = __exit_p(at91_rtc_remove),
|
|
+ .shutdown = at91_rtc_shutdown,
|
|
+ .suspend = at91_rtc_suspend,
|
|
+ .resume = at91_rtc_resume,
|
|
+};
|
|
+
|
|
+/* Chips can have more than one RTT module, and they can be used for more
|
|
+ * than just RTCs. So we can't just register as "the" RTT driver.
|
|
+ *
|
|
+ * A normal approach in such cases is to create a library to allocate and
|
|
+ * free the modules. Here we just use bus_find_device() as like such a
|
|
+ * library, binding directly ... no runtime "library" footprint is needed.
|
|
+ */
|
|
+static int __init at91_rtc_match(struct device *dev, void *v)
|
|
+{
|
|
+ struct platform_device *pdev = to_platform_device(dev);
|
|
+ int ret;
|
|
+
|
|
+ /* continue searching if this isn't the RTT we need */
|
|
+ if (strcmp("at91_rtt", pdev->name) != 0
|
|
+ || pdev->id != CONFIG_RTC_DRV_AT91SAM9_RTT)
|
|
+ goto fail;
|
|
+
|
|
+ /* else we found it ... but fail unless we can bind to the RTC driver */
|
|
+ if (dev->driver) {
|
|
+ dev_dbg(dev, "busy, can't use as RTC!\n");
|
|
+ goto fail;
|
|
+ }
|
|
+ dev->driver = &at91_rtc_driver.driver;
|
|
+ if (device_attach(dev) == 0) {
|
|
+ dev_dbg(dev, "can't attach RTC!\n");
|
|
+ goto fail;
|
|
+ }
|
|
+ ret = at91_rtc_probe(pdev);
|
|
+ if (ret == 0)
|
|
+ return true;
|
|
+
|
|
+ dev_dbg(dev, "RTC probe err %d!\n", ret);
|
|
+fail:
|
|
+ return false;
|
|
+}
|
|
+
|
|
+static int __init at91_rtc_init(void)
|
|
+{
|
|
+ int status;
|
|
+ struct device *rtc;
|
|
+
|
|
+ status = platform_driver_register(&at91_rtc_driver);
|
|
+ if (status)
|
|
+ return status;
|
|
+ rtc = bus_find_device(&platform_bus_type, NULL,
|
|
+ NULL, at91_rtc_match);
|
|
+ if (!rtc)
|
|
+ platform_driver_unregister(&at91_rtc_driver);
|
|
+ return rtc ? 0 : -ENODEV;
|
|
+}
|
|
+module_init(at91_rtc_init);
|
|
+
|
|
+static void __exit at91_rtc_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&at91_rtc_driver);
|
|
+}
|
|
+module_exit(at91_rtc_exit);
|
|
+
|
|
+
|
|
+MODULE_AUTHOR("Michel Benoit");
|
|
+MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
|
|
+MODULE_LICENSE("GPL");
|
|
diff -urN -x CVS linux-2.6.24/drivers/serial/atmel_serial.c linux-2.6/drivers/serial/atmel_serial.c
|
|
--- linux-2.6.24/drivers/serial/atmel_serial.c 2008-03-01 22:02:13.000000000 +0200
|
|
+++ linux-2.6/drivers/serial/atmel_serial.c 2008-02-24 19:02:50.000000000 +0200
|
|
@@ -7,6 +7,8 @@
|
|
* Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
*
|
|
+ * DMA support added by Chip Coldwell.
|
|
+ *
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
@@ -33,7 +35,9 @@
|
|
#include <linux/sysrq.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/platform_device.h>
|
|
+#include <linux/dma-mapping.h>
|
|
#include <linux/atmel_pdc.h>
|
|
+#include <linux/atmel_serial.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
@@ -45,7 +49,10 @@
|
|
#include <asm/arch/gpio.h>
|
|
#endif
|
|
|
|
-#include "atmel_serial.h"
|
|
+#define SUPPORT_PDC
|
|
+#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3)
|
|
+#warning "Revisit"
|
|
+#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
|
|
|
|
#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
@@ -107,6 +114,13 @@
|
|
static int (*atmel_open_hook)(struct uart_port *);
|
|
static void (*atmel_close_hook)(struct uart_port *);
|
|
|
|
+struct atmel_dma_buffer {
|
|
+ unsigned char *buf;
|
|
+ dma_addr_t dma_addr;
|
|
+ size_t dma_size;
|
|
+ unsigned int ofs;
|
|
+};
|
|
+
|
|
/*
|
|
* We wrap our port structure around the generic uart_port.
|
|
*/
|
|
@@ -115,10 +129,20 @@
|
|
struct clk *clk; /* uart clock */
|
|
unsigned short suspended; /* is port suspended? */
|
|
int break_active; /* break being received */
|
|
+
|
|
+ short use_dma_rx; /* enable PDC receiver */
|
|
+ short pdc_rx_idx; /* current PDC RX buffer */
|
|
+ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
|
|
+
|
|
+ short use_dma_tx; /* enable PDC transmitter */
|
|
+ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
|
|
};
|
|
|
|
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
|
|
|
|
+#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx]
|
|
+#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx
|
|
+
|
|
#ifdef SUPPORT_SYSRQ
|
|
static struct console atmel_console;
|
|
#endif
|
|
@@ -204,7 +228,14 @@
|
|
*/
|
|
static void atmel_stop_tx(struct uart_port *port)
|
|
{
|
|
- UART_PUT_IDR(port, ATMEL_US_TXRDY);
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+
|
|
+ if (atmel_port->use_dma_tx) {
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
|
|
+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
|
|
+ }
|
|
+ else
|
|
+ UART_PUT_IDR(port, ATMEL_US_TXRDY);
|
|
}
|
|
|
|
/*
|
|
@@ -212,7 +243,19 @@
|
|
*/
|
|
static void atmel_start_tx(struct uart_port *port)
|
|
{
|
|
- UART_PUT_IER(port, ATMEL_US_TXRDY);
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+
|
|
+ if (atmel_port->use_dma_tx) {
|
|
+ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
|
|
+ /* The transmitter is already running. Yes, we
|
|
+ really need this.*/
|
|
+ return;
|
|
+
|
|
+ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
|
|
+ }
|
|
+ else
|
|
+ UART_PUT_IER(port, ATMEL_US_TXRDY);
|
|
}
|
|
|
|
/*
|
|
@@ -220,7 +263,14 @@
|
|
*/
|
|
static void atmel_stop_rx(struct uart_port *port)
|
|
{
|
|
- UART_PUT_IDR(port, ATMEL_US_RXRDY);
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+
|
|
+ if (atmel_port->use_dma_rx) {
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */
|
|
+ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
|
|
+ }
|
|
+ else
|
|
+ UART_PUT_IDR(port, ATMEL_US_RXRDY);
|
|
}
|
|
|
|
/*
|
|
@@ -243,6 +293,134 @@
|
|
}
|
|
|
|
/*
|
|
+ * Receive data via the PDC. A buffer has been fulled.
|
|
+ */
|
|
+static void atmel_pdc_endrx(struct uart_port *port)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+ struct tty_struct *tty = port->info->tty;
|
|
+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
|
|
+ unsigned int count;
|
|
+
|
|
+ count = pdc->dma_size - pdc->ofs;
|
|
+ if (likely(count > 0)) {
|
|
+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
|
|
+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
|
|
+ tty_flip_buffer_push(tty);
|
|
+
|
|
+ port->icount.rx += count;
|
|
+ }
|
|
+
|
|
+ /* Set this buffer as the next receive buffer */
|
|
+ pdc->ofs = 0;
|
|
+ UART_PUT_RNPR(port, pdc->dma_addr);
|
|
+ UART_PUT_RNCR(port, pdc->dma_size);
|
|
+
|
|
+ /* Switch to next buffer */
|
|
+ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Receive data via the PDC. At least one byte was received, but the
|
|
+ * buffer was not full when the inter-character timeout expired.
|
|
+ */
|
|
+static void atmel_pdc_timeout(struct uart_port *port)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+ struct tty_struct *tty = port->info->tty;
|
|
+ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
|
|
+ /* unsigned */ int ofs, count;
|
|
+
|
|
+ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */
|
|
+ count = ofs - pdc->ofs;
|
|
+
|
|
+ if (likely(count > 0)) {
|
|
+ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
|
|
+ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
|
|
+ tty_flip_buffer_push(tty);
|
|
+
|
|
+ pdc->ofs = ofs;
|
|
+ port->icount.rx += count;
|
|
+ }
|
|
+
|
|
+ /* reset the UART timeout */
|
|
+ UART_PUT_CR(port, ATMEL_US_STTTO);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Deal with parity, framing and overrun errors.
|
|
+ */
|
|
+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
|
|
+{
|
|
+ /* clear error */
|
|
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
|
|
+
|
|
+ if (status & ATMEL_US_RXBRK) {
|
|
+ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
|
|
+ port->icount.brk++;
|
|
+ }
|
|
+ if (status & ATMEL_US_PARE)
|
|
+ port->icount.parity++;
|
|
+ if (status & ATMEL_US_FRAME)
|
|
+ port->icount.frame++;
|
|
+ if (status & ATMEL_US_OVRE)
|
|
+ port->icount.overrun++;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * A transmission via the PDC is complete.
|
|
+ */
|
|
+static void atmel_pdc_endtx(struct uart_port *port)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+ struct circ_buf *xmit = &port->info->xmit;
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
|
|
+
|
|
+ xmit->tail += pdc->ofs;
|
|
+ if (xmit->tail >= SERIAL_XMIT_SIZE)
|
|
+ xmit->tail -= SERIAL_XMIT_SIZE;
|
|
+
|
|
+ port->icount.tx += pdc->ofs;
|
|
+ pdc->ofs = 0;
|
|
+
|
|
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
+ uart_write_wakeup(port);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * The PDC transmitter is idle, so either start the next transfer or
|
|
+ * disable the transmitter.
|
|
+ */
|
|
+static void atmel_pdc_txbufe(struct uart_port *port)
|
|
+{
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+ struct circ_buf *xmit = &port->info->xmit;
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
|
|
+ int count;
|
|
+
|
|
+ if (!uart_circ_empty(xmit)) {
|
|
+ /* more to transmit - setup next transfer */
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
|
|
+ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
|
|
+
|
|
+ if (xmit->tail < xmit->head)
|
|
+ count = xmit->head - xmit->tail;
|
|
+ else
|
|
+ count = SERIAL_XMIT_SIZE - xmit->tail;
|
|
+ pdc->ofs = count;
|
|
+
|
|
+ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
|
|
+ UART_PUT_TCR(port, count);
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
|
|
+ }
|
|
+ else {
|
|
+ /* nothing left to transmit - disable the transmitter */
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
|
|
+ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
|
|
+ }
|
|
+}
|
|
+
|
|
+/*
|
|
* Characters received (called from interrupt handler)
|
|
*/
|
|
static void atmel_rx_chars(struct uart_port *port)
|
|
@@ -361,6 +539,14 @@
|
|
status = UART_GET_CSR(port);
|
|
pending = status & UART_GET_IMR(port);
|
|
while (pending) {
|
|
+ /* PDC receive */
|
|
+ if (pending & ATMEL_US_ENDRX)
|
|
+ atmel_pdc_endrx(port);
|
|
+ if (pending & ATMEL_US_TIMEOUT)
|
|
+ atmel_pdc_timeout(port);
|
|
+ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
|
|
+ atmel_pdc_rxerr(port, pending);
|
|
+
|
|
/* Interrupt receive */
|
|
if (pending & ATMEL_US_RXRDY)
|
|
atmel_rx_chars(port);
|
|
@@ -385,6 +571,12 @@
|
|
if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
|
|
wake_up_interruptible(&port->info->delta_msr_wait);
|
|
|
|
+ /* PDC transmit */
|
|
+ if (pending & ATMEL_US_ENDTX)
|
|
+ atmel_pdc_endtx(port);
|
|
+ if (pending & ATMEL_US_TXBUFE)
|
|
+ atmel_pdc_txbufe(port);
|
|
+
|
|
/* Interrupt transmit */
|
|
if (pending & ATMEL_US_TXRDY)
|
|
atmel_tx_chars(port);
|
|
@@ -403,6 +595,7 @@
|
|
*/
|
|
static int atmel_startup(struct uart_port *port)
|
|
{
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
int retval;
|
|
|
|
/*
|
|
@@ -422,6 +615,47 @@
|
|
}
|
|
|
|
/*
|
|
+ * Initialize DMA (if necessary)
|
|
+ */
|
|
+ if (atmel_port->use_dma_rx) {
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < 2; i++) {
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
|
|
+
|
|
+ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
|
|
+ if (pdc->buf == NULL) {
|
|
+ if (i != 0) {
|
|
+ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
|
|
+ kfree(atmel_port->pdc_rx[0].buf);
|
|
+ }
|
|
+ free_irq(port->irq, port);
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
|
|
+ pdc->dma_size = PDC_BUFFER_SIZE;
|
|
+ pdc->ofs = 0;
|
|
+ }
|
|
+
|
|
+ atmel_port->pdc_rx_idx = 0;
|
|
+
|
|
+ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
|
|
+ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
|
|
+
|
|
+ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
|
|
+ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
|
|
+ }
|
|
+ if (atmel_port->use_dma_tx) {
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
|
|
+ struct circ_buf *xmit = &port->info->xmit;
|
|
+
|
|
+ pdc->buf = xmit->buf;
|
|
+ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
|
|
+ pdc->dma_size = SERIAL_XMIT_SIZE;
|
|
+ pdc->ofs = 0;
|
|
+ }
|
|
+
|
|
+ /*
|
|
* If there is a specific "open" function (to register
|
|
* control line interrupts)
|
|
*/
|
|
@@ -439,7 +673,15 @@
|
|
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
|
|
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
|
|
|
|
- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
|
|
+ if (atmel_port->use_dma_rx) {
|
|
+ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */
|
|
+ UART_PUT_CR(port, ATMEL_US_STTTO);
|
|
+
|
|
+ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
|
|
+ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */
|
|
+ }
|
|
+ else
|
|
+ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
|
|
|
|
return 0;
|
|
}
|
|
@@ -449,6 +691,33 @@
|
|
*/
|
|
static void atmel_shutdown(struct uart_port *port)
|
|
{
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
+
|
|
+ /*
|
|
+ * Ensure everything is stopped.
|
|
+ */
|
|
+ atmel_stop_rx(port);
|
|
+ atmel_stop_tx(port);
|
|
+
|
|
+ /*
|
|
+ * Shut-down the DMA.
|
|
+ */
|
|
+ if (atmel_port->use_dma_rx) {
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < 2; i++) {
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
|
|
+
|
|
+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
|
|
+ kfree(pdc->buf);
|
|
+ }
|
|
+ }
|
|
+ if (atmel_port->use_dma_tx) {
|
|
+ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
|
|
+
|
|
+ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
|
|
+ }
|
|
+
|
|
/*
|
|
* Disable all interrupts, port and break condition.
|
|
*/
|
|
@@ -500,6 +769,7 @@
|
|
*/
|
|
static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
|
|
{
|
|
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
unsigned long flags;
|
|
unsigned int mode, imr, quot, baud;
|
|
|
|
@@ -509,7 +779,7 @@
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
|
|
+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
|
|
quot /= 8;
|
|
mode |= ATMEL_US_USCLKS_MCK_DIV8;
|
|
}
|
|
@@ -558,6 +828,9 @@
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
port->read_status_mask |= ATMEL_US_RXBRK;
|
|
|
|
+ if (atmel_port->use_dma_rx) /* need to enable error interrupts */
|
|
+ UART_PUT_IER(port, port->read_status_mask);
|
|
+
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
@@ -582,7 +855,8 @@
|
|
/* disable interrupts and drain transmitter */
|
|
imr = UART_GET_IMR(port); /* get interrupt mask */
|
|
UART_PUT_IDR(port, -1); /* disable all interrupts */
|
|
- while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) { barrier(); }
|
|
+ while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
|
|
+ cpu_relax();
|
|
|
|
/* disable receiver and transmitter */
|
|
UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
|
|
@@ -736,6 +1010,13 @@
|
|
clk_enable(atmel_port->clk);
|
|
port->uartclk = clk_get_rate(atmel_port->clk);
|
|
}
|
|
+
|
|
+#ifdef SUPPORT_PDC
|
|
+ atmel_port->use_dma_rx = data->use_dma_rx;
|
|
+ atmel_port->use_dma_tx = data->use_dma_tx;
|
|
+ if (atmel_port->use_dma_tx)
|
|
+ port->fifosize = PDC_BUFFER_SIZE;
|
|
+#endif
|
|
}
|
|
|
|
/*
|
|
@@ -760,7 +1041,7 @@
|
|
static void atmel_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
|
|
- barrier();
|
|
+ cpu_relax();
|
|
UART_PUT_CHAR(port, ch);
|
|
}
|
|
|
|
@@ -798,13 +1079,13 @@
|
|
{
|
|
unsigned int mr, quot;
|
|
|
|
-// TODO: CR is a write-only register
|
|
-// unsigned int cr;
|
|
-//
|
|
-// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN);
|
|
-// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) {
|
|
-// /* ok, the port was enabled */
|
|
-// }
|
|
+ /*
|
|
+ * If the baud rate generator isn't running, the port wasn't
|
|
+ * initialized by the boot loader.
|
|
+ */
|
|
+ quot = UART_GET_BRGR(port);
|
|
+ if (!quot)
|
|
+ return;
|
|
|
|
mr = UART_GET_MR(port) & ATMEL_US_CHRL;
|
|
if (mr == ATMEL_US_CHRL_8)
|
|
@@ -824,7 +1105,6 @@
|
|
* lower than one of those, as it would make us fall through
|
|
* to a much lower baud rate than we really want.
|
|
*/
|
|
- quot = UART_GET_BRGR(port);
|
|
*baud = port->uartclk / (16 * (quot - 1));
|
|
}
|
|
|
|
@@ -912,7 +1192,8 @@
|
|
struct uart_port *port = platform_get_drvdata(pdev);
|
|
struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
|
|
|
|
- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
|
|
+ if (device_may_wakeup(&pdev->dev)
|
|
+ && !clk_must_disable(atmel_port->clk))
|
|
enable_irq_wake(port->irq);
|
|
else {
|
|
uart_suspend_port(&atmel_uart, port);
|
|
diff -urN -x CVS linux-2.6.24/drivers/serial/atmel_serial.h linux-2.6/drivers/serial/atmel_serial.h
|
|
--- linux-2.6.24/drivers/serial/atmel_serial.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/drivers/serial/atmel_serial.h 1970-01-01 02:00:00.000000000 +0200
|
|
@@ -1,127 +0,0 @@
|
|
-/*
|
|
- * drivers/serial/atmel_serial.h
|
|
- *
|
|
- * Copyright (C) 2005 Ivan Kokshaysky
|
|
- * Copyright (C) SAN People
|
|
- *
|
|
- * USART registers.
|
|
- * Based on AT91RM9200 datasheet revision E.
|
|
- *
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
- * it under the terms of the GNU General Public License as published by
|
|
- * the Free Software Foundation; either version 2 of the License, or
|
|
- * (at your option) any later version.
|
|
- */
|
|
-
|
|
-#ifndef ATMEL_SERIAL_H
|
|
-#define ATMEL_SERIAL_H
|
|
-
|
|
-#define ATMEL_US_CR 0x00 /* Control Register */
|
|
-#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */
|
|
-#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */
|
|
-#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */
|
|
-#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */
|
|
-#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */
|
|
-#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */
|
|
-#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */
|
|
-#define ATMEL_US_STTBRK (1 << 9) /* Start Break */
|
|
-#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */
|
|
-#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */
|
|
-#define ATMEL_US_SENDA (1 << 12) /* Send Address */
|
|
-#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */
|
|
-#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
|
|
-#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */
|
|
-#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */
|
|
-#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */
|
|
-#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */
|
|
-#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */
|
|
-
|
|
-#define ATMEL_US_MR 0x04 /* Mode Register */
|
|
-#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */
|
|
-#define ATMEL_US_USMODE_NORMAL 0
|
|
-#define ATMEL_US_USMODE_RS485 1
|
|
-#define ATMEL_US_USMODE_HWHS 2
|
|
-#define ATMEL_US_USMODE_MODEM 3
|
|
-#define ATMEL_US_USMODE_ISO7816_T0 4
|
|
-#define ATMEL_US_USMODE_ISO7816_T1 6
|
|
-#define ATMEL_US_USMODE_IRDA 8
|
|
-#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
|
|
-#define ATMEL_US_USCLKS_MCK (0 << 4)
|
|
-#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
|
|
-#define ATMEL_US_USCLKS_SCK (3 << 4)
|
|
-#define ATMEL_US_CHRL (3 << 6) /* Character Length */
|
|
-#define ATMEL_US_CHRL_5 (0 << 6)
|
|
-#define ATMEL_US_CHRL_6 (1 << 6)
|
|
-#define ATMEL_US_CHRL_7 (2 << 6)
|
|
-#define ATMEL_US_CHRL_8 (3 << 6)
|
|
-#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */
|
|
-#define ATMEL_US_PAR (7 << 9) /* Parity Type */
|
|
-#define ATMEL_US_PAR_EVEN (0 << 9)
|
|
-#define ATMEL_US_PAR_ODD (1 << 9)
|
|
-#define ATMEL_US_PAR_SPACE (2 << 9)
|
|
-#define ATMEL_US_PAR_MARK (3 << 9)
|
|
-#define ATMEL_US_PAR_NONE (4 << 9)
|
|
-#define ATMEL_US_PAR_MULTI_DROP (6 << 9)
|
|
-#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */
|
|
-#define ATMEL_US_NBSTOP_1 (0 << 12)
|
|
-#define ATMEL_US_NBSTOP_1_5 (1 << 12)
|
|
-#define ATMEL_US_NBSTOP_2 (2 << 12)
|
|
-#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */
|
|
-#define ATMEL_US_CHMODE_NORMAL (0 << 14)
|
|
-#define ATMEL_US_CHMODE_ECHO (1 << 14)
|
|
-#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14)
|
|
-#define ATMEL_US_CHMODE_REM_LOOP (3 << 14)
|
|
-#define ATMEL_US_MSBF (1 << 16) /* Bit Order */
|
|
-#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */
|
|
-#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */
|
|
-#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */
|
|
-#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */
|
|
-#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */
|
|
-#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */
|
|
-#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */
|
|
-
|
|
-#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */
|
|
-#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */
|
|
-#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */
|
|
-#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */
|
|
-#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */
|
|
-#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */
|
|
-#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */
|
|
-#define ATMEL_US_FRAME (1 << 6) /* Framing Error */
|
|
-#define ATMEL_US_PARE (1 << 7) /* Parity Error */
|
|
-#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */
|
|
-#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */
|
|
-#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */
|
|
-#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
|
|
-#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */
|
|
-#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */
|
|
-#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */
|
|
-#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */
|
|
-#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */
|
|
-#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */
|
|
-#define ATMEL_US_RI (1 << 20) /* RI */
|
|
-#define ATMEL_US_DSR (1 << 21) /* DSR */
|
|
-#define ATMEL_US_DCD (1 << 22) /* DCD */
|
|
-#define ATMEL_US_CTS (1 << 23) /* CTS */
|
|
-
|
|
-#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */
|
|
-#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */
|
|
-#define ATMEL_US_CSR 0x14 /* Channel Status Register */
|
|
-#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
|
|
-#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
|
|
-#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */
|
|
-
|
|
-#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
|
|
-#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
|
|
-
|
|
-#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */
|
|
-#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */
|
|
-
|
|
-#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */
|
|
-#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */
|
|
-
|
|
-#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */
|
|
-#define ATMEL_US_NER 0x44 /* Number of Errors Register */
|
|
-#define ATMEL_US_IF 0x4c /* IrDA Filter Register */
|
|
-
|
|
-#endif
|
|
diff -urN -x CVS linux-2.6.24/drivers/spi/Kconfig linux-2.6/drivers/spi/Kconfig
|
|
--- linux-2.6.24/drivers/spi/Kconfig 2008-03-01 22:02:13.000000000 +0200
|
|
+++ linux-2.6/drivers/spi/Kconfig 2007-12-31 10:44:31.000000000 +0200
|
|
@@ -100,6 +100,15 @@
|
|
inexpensive battery powered microcontroller evaluation board.
|
|
This same cable can be used to flash new firmware.
|
|
|
|
+config SPI_AT91
|
|
+ tristate "AT91RM9200 Bitbang SPI Master"
|
|
+ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
|
|
+ select SPI_BITBANG
|
|
+ help
|
|
+ This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
|
|
+ The SPI_ATMEL driver will be its replacement, using the native
|
|
+ SPI hardware and its DMA controller.
|
|
+
|
|
config SPI_IMX
|
|
tristate "Freescale iMX SPI controller"
|
|
depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
|
|
diff -urN -x CVS linux-2.6.24/drivers/spi/Makefile linux-2.6/drivers/spi/Makefile
|
|
--- linux-2.6.24/drivers/spi/Makefile 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/drivers/spi/Makefile 2007-12-31 10:44:31.000000000 +0200
|
|
@@ -27,6 +27,7 @@
|
|
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
|
|
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
|
|
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
|
|
+obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o
|
|
# ... add above this line ...
|
|
|
|
# SPI protocol drivers (device/link on bus)
|
|
diff -urN -x CVS linux-2.6.24/drivers/spi/spi_at91_bitbang.c linux-2.6/drivers/spi/spi_at91_bitbang.c
|
|
--- linux-2.6.24/drivers/spi/spi_at91_bitbang.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/drivers/spi/spi_at91_bitbang.c 2007-12-31 15:18:43.000000000 +0200
|
|
@@ -0,0 +1,207 @@
|
|
+/*
|
|
+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
|
|
+ *
|
|
+ * Copyright (C) 2006 David Brownell
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
+ */
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/spi/spi_bitbang.h>
|
|
+
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+
|
|
+/*
|
|
+ * FIXME this bitbanging version is just to help bootstrap systems until
|
|
+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
|
|
+ * be a drop-in replacement for this one, and much faster.
|
|
+ *
|
|
+ * remember:
|
|
+ *
|
|
+ * - other at91 parts (like at91sam9) have multiple controllers
|
|
+ * and different pin muxing; this version is at91rm9200 specfic.
|
|
+ *
|
|
+ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
|
|
+ *
|
|
+ * - rm9200 spi chipselects drop wrongly, so the native driver
|
|
+ * will need to use gpios much like this does.
|
|
+ *
|
|
+ * - real hardware only allows 8..16 bits per word, while this
|
|
+ * bitbanger allows 1..32 (incompatible superset).
|
|
+ *
|
|
+ * - this disregards clock parameters. with inlined gpio calls,
|
|
+ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
|
|
+ * than using the subroutined veresion from txrx_word().
|
|
+ *
|
|
+ * - suspend/resume and <linux/clk.h> support is missing ...
|
|
+ */
|
|
+
|
|
+#define spi_miso_bit AT91_PIN_PA0
|
|
+#define spi_mosi_bit AT91_PIN_PA1
|
|
+#define spi_sck_bit AT91_PIN_PA2
|
|
+
|
|
+struct at91_spi {
|
|
+ struct spi_bitbang bitbang;
|
|
+ struct platform_device *pdev;
|
|
+};
|
|
+
|
|
+/*----------------------------------------------------------------------*/
|
|
+
|
|
+static inline void setsck(struct spi_device *spi, int is_on)
|
|
+{
|
|
+ at91_set_gpio_value(spi_sck_bit, is_on);
|
|
+}
|
|
+
|
|
+static inline void setmosi(struct spi_device *spi, int is_on)
|
|
+{
|
|
+ at91_set_gpio_value(spi_mosi_bit, is_on);
|
|
+}
|
|
+
|
|
+static inline int getmiso(struct spi_device *spi)
|
|
+{
|
|
+ return at91_get_gpio_value(spi_miso_bit);
|
|
+}
|
|
+
|
|
+static void at91_spi_chipselect(struct spi_device *spi, int is_active)
|
|
+{
|
|
+ unsigned long cs = (unsigned long) spi->controller_data;
|
|
+
|
|
+ /* set default clock polarity */
|
|
+ if (is_active)
|
|
+ setsck(spi, spi->mode & SPI_CPOL);
|
|
+
|
|
+ /* only support active-low (default) */
|
|
+ at91_set_gpio_value(cs, !is_active);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * NOTE: this is "as fast as we can"; it should be a function of
|
|
+ * the device clock ...
|
|
+ */
|
|
+#define spidelay(X) do{} while(0)
|
|
+
|
|
+#define EXPAND_BITBANG_TXRX
|
|
+#include <linux/spi/spi_bitbang.h>
|
|
+
|
|
+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
|
|
+ unsigned nsecs, u32 word, u8 bits)
|
|
+{
|
|
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
|
|
+}
|
|
+
|
|
+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
|
|
+ unsigned nsecs, u32 word, u8 bits)
|
|
+{
|
|
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
|
|
+}
|
|
+
|
|
+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
|
|
+ unsigned nsecs, u32 word, u8 bits)
|
|
+{
|
|
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
|
|
+}
|
|
+
|
|
+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
|
|
+ unsigned nsecs, u32 word, u8 bits)
|
|
+{
|
|
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
|
|
+}
|
|
+
|
|
+/*----------------------------------------------------------------------*/
|
|
+
|
|
+static int __init at91_spi_probe(struct platform_device *pdev)
|
|
+{
|
|
+ int status;
|
|
+ struct spi_master *master;
|
|
+ struct at91_spi *at91_spi;
|
|
+
|
|
+ if (pdev->id != 0) /* SPI0 bus */
|
|
+ return -EINVAL;
|
|
+
|
|
+ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
|
|
+ if (!master)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ at91_spi = spi_master_get_devdata(master);
|
|
+ at91_spi->pdev = pdev;
|
|
+ platform_set_drvdata(pdev, at91_spi);
|
|
+
|
|
+ /* SPI and bitbang hookup */
|
|
+ master->bus_num = 0;
|
|
+ master->num_chipselect = 4;
|
|
+
|
|
+ at91_spi->bitbang.master = spi_master_get(master);
|
|
+ at91_spi->bitbang.chipselect = at91_spi_chipselect;
|
|
+ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
|
|
+ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
|
|
+ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
|
|
+ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
|
|
+
|
|
+ status = spi_bitbang_start(&at91_spi->bitbang);
|
|
+ if (status < 0)
|
|
+ (void) spi_master_put(at91_spi->bitbang.master);
|
|
+
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static int __exit at91_spi_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct at91_spi *at91_spi = platform_get_drvdata(pdev);
|
|
+ int status;
|
|
+
|
|
+ /* stop() unregisters child devices too */
|
|
+ status = spi_bitbang_stop(&at91_spi->bitbang);
|
|
+ (void) spi_master_put(at91_spi->bitbang.master);
|
|
+
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ return status;
|
|
+}
|
|
+
|
|
+static struct platform_driver at91_spi_driver = {
|
|
+ .probe = at91_spi_probe,
|
|
+ .remove = __exit_p(at91_spi_remove),
|
|
+ .driver = {
|
|
+ .name = "at91_spi",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init at91_spi_init(void)
|
|
+{
|
|
+ at91_set_gpio_output(spi_sck_bit, 0);
|
|
+ at91_set_gpio_output(spi_mosi_bit, 0);
|
|
+ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
|
|
+
|
|
+ /* register driver */
|
|
+ return platform_driver_register(&at91_spi_driver);
|
|
+}
|
|
+
|
|
+static void __exit at91_spi_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&at91_spi_driver);
|
|
+}
|
|
+
|
|
+device_initcall(at91_spi_init);
|
|
+module_exit(at91_spi_exit);
|
|
+
|
|
+MODULE_ALIAS("at91_spi.0");
|
|
+
|
|
+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
|
|
+MODULE_AUTHOR("David Brownell");
|
|
+MODULE_LICENSE("GPL");
|
|
diff -urN -x CVS linux-2.6.24/drivers/usb/gadget/Kconfig linux-2.6/drivers/usb/gadget/Kconfig
|
|
--- linux-2.6.24/drivers/usb/gadget/Kconfig 2008-03-01 22:02:13.000000000 +0200
|
|
+++ linux-2.6/drivers/usb/gadget/Kconfig 2008-01-16 20:26:55.000000000 +0200
|
|
@@ -308,7 +308,7 @@
|
|
|
|
config USB_GADGET_AT91
|
|
boolean "AT91 USB Device Port"
|
|
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL
|
|
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
|
|
select USB_GADGET_SELECTED
|
|
help
|
|
Many Atmel AT91 processors (such as the AT91RM2000) have a
|
|
diff -urN -x CVS linux-2.6.24/drivers/usb/gadget/at91_udc.c linux-2.6/drivers/usb/gadget/at91_udc.c
|
|
--- linux-2.6.24/drivers/usb/gadget/at91_udc.c 2008-03-01 22:02:13.000000000 +0200
|
|
+++ linux-2.6/drivers/usb/gadget/at91_udc.c 2007-12-31 10:44:31.000000000 +0200
|
|
@@ -1784,7 +1784,7 @@
|
|
*/
|
|
if ((!udc->suspended && udc->addr)
|
|
|| !wake
|
|
- || at91_suspend_entering_slow_clock()) {
|
|
+ || clk_must_disable(udc->fclk)) {
|
|
pullup(udc, 0);
|
|
wake = 0;
|
|
} else
|
|
diff -urN -x CVS linux-2.6.24/drivers/usb/host/ohci-at91.c linux-2.6/drivers/usb/host/ohci-at91.c
|
|
--- linux-2.6.24/drivers/usb/host/ohci-at91.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/drivers/usb/host/ohci-at91.c 2007-12-31 14:05:15.000000000 +0200
|
|
@@ -299,7 +299,7 @@
|
|
*
|
|
* REVISIT: some boards will be able to turn VBUS off...
|
|
*/
|
|
- if (at91_suspend_entering_slow_clock()) {
|
|
+ if (clk_must_disable(fclk)) {
|
|
ohci_usb_reset (ohci);
|
|
at91_stop_clock();
|
|
}
|
|
diff -urN -x CVS linux-2.6.24/drivers/video/Kconfig linux-2.6/drivers/video/Kconfig
|
|
--- linux-2.6.24/drivers/video/Kconfig 2008-03-01 22:02:13.000000000 +0200
|
|
+++ linux-2.6/drivers/video/Kconfig 2008-01-16 21:25:17.000000000 +0200
|
|
@@ -876,6 +876,17 @@
|
|
framebuffer. Product specs at
|
|
<http://www.erd.epson.com/vdc/html/products.htm>.
|
|
|
|
+config FB_S1D15605
|
|
+ tristate "Epson S1D15605 framebuffer support"
|
|
+ depends on FB
|
|
+ default m if MACH_KB9200
|
|
+ select FB_CFB_FILLRECT
|
|
+ select FB_CFB_COPYAREA
|
|
+ select FB_CFB_IMAGEBLIT
|
|
+ help
|
|
+ Build in support for the S1D15605 Epson Research 128x64
|
|
+ LCD controller as a framebuffer.
|
|
+
|
|
config FB_S1D13XXX
|
|
tristate "Epson S1D13XXX framebuffer support"
|
|
depends on FB
|
|
@@ -889,7 +900,7 @@
|
|
|
|
config FB_ATMEL
|
|
tristate "AT91/AT32 LCD Controller support"
|
|
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
|
|
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
|
|
select FB_CFB_FILLRECT
|
|
select FB_CFB_COPYAREA
|
|
select FB_CFB_IMAGEBLIT
|
|
diff -urN -x CVS linux-2.6.24/drivers/video/Makefile linux-2.6/drivers/video/Makefile
|
|
--- linux-2.6.24/drivers/video/Makefile 2008-03-01 22:02:13.000000000 +0200
|
|
+++ linux-2.6/drivers/video/Makefile 2007-12-31 10:44:31.000000000 +0200
|
|
@@ -87,7 +87,8 @@
|
|
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
|
|
obj-$(CONFIG_FB_HIT) += hitfb.o
|
|
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
|
|
-obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
|
|
+obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o
|
|
+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
|
|
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
|
|
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
|
|
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
|
|
diff -urN -x CVS linux-2.6.24/drivers/video/atmel_lcdfb.c linux-2.6/drivers/video/atmel_lcdfb.c
|
|
--- linux-2.6.24/drivers/video/atmel_lcdfb.c 2008-03-01 22:02:13.000000000 +0200
|
|
+++ linux-2.6/drivers/video/atmel_lcdfb.c 2008-02-25 22:42:48.000000000 +0200
|
|
@@ -16,6 +16,7 @@
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
+#include <linux/backlight.h>
|
|
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/cpu.h>
|
|
@@ -30,7 +31,7 @@
|
|
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
|
|
#define ATMEL_LCDC_DMA_BURST_LEN 8
|
|
|
|
-#if defined(CONFIG_ARCH_AT91SAM9263)
|
|
+#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
|
|
#define ATMEL_LCDC_FIFO_SIZE 2048
|
|
#else
|
|
#define ATMEL_LCDC_FIFO_SIZE 512
|
|
@@ -69,6 +70,107 @@
|
|
}
|
|
#endif
|
|
|
|
+static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
|
|
+ | ATMEL_LCDC_POL_POSITIVE
|
|
+ | ATMEL_LCDC_ENA_PWMENABLE;
|
|
+
|
|
+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
|
|
+
|
|
+/* some bl->props field just changed */
|
|
+static int atmel_bl_update_status(struct backlight_device *bl)
|
|
+{
|
|
+ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
|
|
+ int power = sinfo->bl_power;
|
|
+ int brightness = bl->props.brightness;
|
|
+
|
|
+ /* REVISIT there may be a meaningful difference between
|
|
+ * fb_blank and power ... there seem to be some cases
|
|
+ * this doesn't handle correctly.
|
|
+ */
|
|
+ if (bl->props.fb_blank != sinfo->bl_power)
|
|
+ power = bl->props.fb_blank;
|
|
+ else if (bl->props.power != sinfo->bl_power)
|
|
+ power = bl->props.power;
|
|
+
|
|
+ if (brightness < 0 && power == FB_BLANK_UNBLANK)
|
|
+ brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
|
|
+ else if (power != FB_BLANK_UNBLANK)
|
|
+ brightness = 0;
|
|
+
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
|
|
+ brightness ? contrast_ctr : 0);
|
|
+
|
|
+ bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int atmel_bl_get_brightness(struct backlight_device *bl)
|
|
+{
|
|
+ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
|
|
+
|
|
+ return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
|
|
+}
|
|
+
|
|
+static struct backlight_ops atmel_lcdc_bl_ops = {
|
|
+ .update_status = atmel_bl_update_status,
|
|
+ .get_brightness = atmel_bl_get_brightness,
|
|
+};
|
|
+
|
|
+static void init_backlight(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+ struct backlight_device *bl;
|
|
+
|
|
+ sinfo->bl_power = FB_BLANK_UNBLANK;
|
|
+
|
|
+ if (sinfo->backlight)
|
|
+ return;
|
|
+
|
|
+ bl = backlight_device_register("backlight", &sinfo->pdev->dev,
|
|
+ sinfo, &atmel_lcdc_bl_ops);
|
|
+ if (IS_ERR(sinfo->backlight)) {
|
|
+ dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
|
|
+ PTR_ERR(bl));
|
|
+ return;
|
|
+ }
|
|
+ sinfo->backlight = bl;
|
|
+
|
|
+ bl->props.power = FB_BLANK_UNBLANK;
|
|
+ bl->props.fb_blank = FB_BLANK_UNBLANK;
|
|
+ bl->props.max_brightness = 0xff;
|
|
+ bl->props.brightness = atmel_bl_get_brightness(bl);
|
|
+}
|
|
+
|
|
+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+ if (sinfo->backlight)
|
|
+ backlight_device_unregister(sinfo->backlight);
|
|
+}
|
|
+
|
|
+#else
|
|
+
|
|
+static void init_backlight(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+ dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
|
|
+}
|
|
+
|
|
+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+}
|
|
+
|
|
+#endif
|
|
+
|
|
+static void init_contrast(struct atmel_lcdfb_info *sinfo)
|
|
+{
|
|
+ /* have some default contrast/backlight settings */
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
|
|
+
|
|
+ if (sinfo->lcdcon_is_backlight)
|
|
+ init_backlight(sinfo);
|
|
+}
|
|
+
|
|
|
|
static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
@@ -370,10 +472,6 @@
|
|
/* Disable all interrupts */
|
|
lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
|
|
|
|
- /* Set contrast */
|
|
- value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
|
|
- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
|
|
- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
|
|
/* ...wait for DMA engine to become idle... */
|
|
while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
|
|
msleep(10);
|
|
@@ -577,6 +675,7 @@
|
|
sinfo->default_monspecs = pdata_sinfo->default_monspecs;
|
|
sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
|
|
sinfo->guard_time = pdata_sinfo->guard_time;
|
|
+ sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
|
|
} else {
|
|
dev_err(dev, "cannot get default configuration\n");
|
|
goto free_info;
|
|
@@ -670,6 +769,9 @@
|
|
goto release_mem;
|
|
}
|
|
|
|
+ /* Initialize PWM for contrast or backlight ("off") */
|
|
+ init_contrast(sinfo);
|
|
+
|
|
/* interrupt */
|
|
ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
|
|
if (ret) {
|
|
@@ -721,6 +823,7 @@
|
|
unregister_irqs:
|
|
free_irq(sinfo->irq_base, info);
|
|
unmap_mmio:
|
|
+ exit_backlight(sinfo);
|
|
iounmap(sinfo->mmio);
|
|
release_mem:
|
|
release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
|
|
@@ -755,6 +858,7 @@
|
|
if (!sinfo)
|
|
return 0;
|
|
|
|
+ exit_backlight(sinfo);
|
|
if (sinfo->atmel_lcdfb_power_control)
|
|
sinfo->atmel_lcdfb_power_control(0);
|
|
unregister_framebuffer(info);
|
|
@@ -779,8 +883,45 @@
|
|
return 0;
|
|
}
|
|
|
|
+#ifdef CONFIG_PM
|
|
+
|
|
+static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
|
|
+{
|
|
+ struct fb_info *info = platform_get_drvdata(pdev);
|
|
+ struct atmel_lcdfb_info *sinfo = info->par;
|
|
+
|
|
+ sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
|
|
+ if (sinfo->atmel_lcdfb_power_control)
|
|
+ sinfo->atmel_lcdfb_power_control(0);
|
|
+ atmel_lcdfb_stop_clock(sinfo);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int atmel_lcdfb_resume(struct platform_device *pdev)
|
|
+{
|
|
+ struct fb_info *info = platform_get_drvdata(pdev);
|
|
+ struct atmel_lcdfb_info *sinfo = info->par;
|
|
+
|
|
+ atmel_lcdfb_start_clock(sinfo);
|
|
+ if (sinfo->atmel_lcdfb_power_control)
|
|
+ sinfo->atmel_lcdfb_power_control(1);
|
|
+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#else
|
|
+#define atmel_lcdfb_suspend NULL
|
|
+#define atmel_lcdfb_resume NULL
|
|
+#endif
|
|
+
|
|
+
|
|
static struct platform_driver atmel_lcdfb_driver = {
|
|
.remove = __exit_p(atmel_lcdfb_remove),
|
|
+ .suspend = atmel_lcdfb_suspend,
|
|
+ .resume = atmel_lcdfb_resume,
|
|
.driver = {
|
|
.name = "atmel_lcdfb",
|
|
.owner = THIS_MODULE,
|
|
diff -urN -x CVS linux-2.6.24/drivers/video/backlight/Kconfig linux-2.6/drivers/video/backlight/Kconfig
|
|
--- linux-2.6.24/drivers/video/backlight/Kconfig 2008-03-01 22:02:14.000000000 +0200
|
|
+++ linux-2.6/drivers/video/backlight/Kconfig 2008-02-25 22:42:48.000000000 +0200
|
|
@@ -50,6 +50,19 @@
|
|
To have support for your specific LCD panel you will have to
|
|
select the proper drivers which depend on this option.
|
|
|
|
+config BACKLIGHT_ATMEL_LCDC
|
|
+ bool "Atmel LCDC Contrast-as-Backlight control"
|
|
+ depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
|
|
+ default y if MACH_SAM9261EK || MACH_SAM9263EK
|
|
+ help
|
|
+ This provides a backlight control internal to the Atmel LCDC
|
|
+ driver. If the LCD "contrast control" on your board is wired
|
|
+ so it controls the backlight brightness, select this option to
|
|
+ export this as a PWM-based backlight control.
|
|
+
|
|
+ If in doubt, it's safe to enable this option; it doesn't kick
|
|
+ in unless the board's description says it's wired that way.
|
|
+
|
|
config BACKLIGHT_CORGI
|
|
tristate "Generic (aka Sharp Corgi) Backlight Driver"
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
@@ -90,3 +103,11 @@
|
|
help
|
|
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
|
|
backlight driver.
|
|
+
|
|
+config BACKLIGHT_KB920x
|
|
+ tristate "KwikByte KB9202 Backlight Driver"
|
|
+ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
|
|
+ default y
|
|
+ help
|
|
+ If you have a KwikByte KB9202 board, say Y to enable the
|
|
+ backlight driver.
|
|
diff -urN -x CVS linux-2.6.24/drivers/video/backlight/Makefile linux-2.6/drivers/video/backlight/Makefile
|
|
--- linux-2.6.24/drivers/video/backlight/Makefile 2008-03-01 22:02:14.000000000 +0200
|
|
+++ linux-2.6/drivers/video/backlight/Makefile 2007-12-31 10:44:34.000000000 +0200
|
|
@@ -9,3 +9,4 @@
|
|
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
|
|
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
|
|
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
|
|
+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
|
|
diff -urN -x CVS linux-2.6.24/drivers/video/backlight/kb920x_bl.c linux-2.6/drivers/video/backlight/kb920x_bl.c
|
|
--- linux-2.6.24/drivers/video/backlight/kb920x_bl.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/drivers/video/backlight/kb920x_bl.c 2007-12-31 10:44:34.000000000 +0200
|
|
@@ -0,0 +1,164 @@
|
|
+/*
|
|
+ * Backlight Driver for KB9202
|
|
+ *
|
|
+ * Copyright (c) 2006 KwikByte
|
|
+ *
|
|
+ * Based on Sharp's Corgi Backlight Driver
|
|
+ *
|
|
+ * This file is subject to the terms and conditions of the GNU General Public
|
|
+ * License. See the file "COPYING" in the main directory of this archive
|
|
+ * for more details.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/spinlock.h>
|
|
+#include <linux/fb.h>
|
|
+#include <linux/backlight.h>
|
|
+
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+/* The backlight is on(1)/off(0) */
|
|
+#define KB9202_DEFAULT_INTENSITY 1
|
|
+#define KB9202_MAX_INTENSITY 1
|
|
+
|
|
+static int kb9202bl_suspended;
|
|
+static int current_intensity = 0;
|
|
+static DEFINE_SPINLOCK(bl_lock);
|
|
+
|
|
+static int kb9202bl_set_intensity(struct backlight_device *bd)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ int intensity = bd->props.brightness;
|
|
+
|
|
+ if (bd->props.power != FB_BLANK_UNBLANK)
|
|
+ intensity = 0;
|
|
+ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
|
|
+ intensity = 0;
|
|
+ if (kb9202bl_suspended)
|
|
+ intensity = 0;
|
|
+
|
|
+ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
|
|
+ intensity = 1;
|
|
+
|
|
+ spin_lock_irqsave(&bl_lock, flags);
|
|
+ if (intensity)
|
|
+ gpio_set_value(AT91_PIN_PC23, 1);
|
|
+ else
|
|
+ gpio_set_value(AT91_PIN_PC23, 0);
|
|
+ spin_unlock_irqrestore(&bl_lock, flags);
|
|
+
|
|
+ current_intensity = intensity;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int kb9202bl_get_intensity(struct backlight_device *bd)
|
|
+{
|
|
+ return current_intensity;
|
|
+}
|
|
+
|
|
+static struct backlight_ops kb9202bl_ops = {
|
|
+ .get_brightness = kb9202bl_get_intensity,
|
|
+ .update_status = kb9202bl_set_intensity,
|
|
+};
|
|
+
|
|
+static int __init kb9202bl_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct backlight_device *bd;
|
|
+
|
|
+ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
|
|
+ if (IS_ERR(bd))
|
|
+ return PTR_ERR(bd);
|
|
+
|
|
+ platform_set_drvdata(pdev, bd);
|
|
+
|
|
+ bd->props.max_brightness = KB9202_MAX_INTENSITY;
|
|
+ bd->props.brightness = KB9202_DEFAULT_INTENSITY;
|
|
+ (void) kb9202bl_set_intensity(bd);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int kb9202bl_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct backlight_device *bd = platform_get_drvdata(pdev);
|
|
+
|
|
+ bd->props.brightness = 0;
|
|
+ bd->props.power = 0;
|
|
+ (void) kb9202bl_set_intensity(bd);
|
|
+
|
|
+ backlight_device_unregister(bd);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+static int kb9202bl_suspend(struct platform_device *pdev, pm_message_t state)
|
|
+{
|
|
+ struct backlight_device *bd = platform_get_drvdata(pdev);
|
|
+
|
|
+ kb9202bl_suspended = 1;
|
|
+ (void) kb9202bl_set_intensity(bd);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int kb9202bl_resume(struct platform_device *pdev)
|
|
+{
|
|
+ struct backlight_device *bd = platform_get_drvdata(pdev);
|
|
+
|
|
+ kb9202bl_suspended = 0;
|
|
+ (void) kb9202bl_set_intensity(bd);
|
|
+ return 0;
|
|
+}
|
|
+#else
|
|
+#define kb9202bl_suspend NULL
|
|
+#define kb9202bl_resume NULL
|
|
+#endif
|
|
+
|
|
+static struct platform_driver kb9202bl_driver = {
|
|
+ .probe = kb9202bl_probe,
|
|
+ .remove = kb9202bl_remove,
|
|
+ .suspend = kb9202bl_suspend,
|
|
+ .resume = kb9202bl_resume,
|
|
+ .driver = {
|
|
+ .name = "kb9202-bl",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device *kb9202bl_device;
|
|
+
|
|
+static int __init kb9202bl_init(void)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ ret = platform_driver_register(&kb9202bl_driver);
|
|
+ if (!ret) {
|
|
+ kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
|
|
+ if (!kb9202bl_device)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ ret = platform_device_add(kb9202bl_device);
|
|
+ if (ret) {
|
|
+ platform_device_put(kb9202bl_device);
|
|
+ platform_driver_unregister(&kb9202bl_driver);
|
|
+ }
|
|
+ }
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static void __exit kb9202bl_exit(void)
|
|
+{
|
|
+ platform_device_unregister(kb9202bl_device);
|
|
+ platform_driver_unregister(&kb9202bl_driver);
|
|
+}
|
|
+
|
|
+module_init(kb9202bl_init);
|
|
+module_exit(kb9202bl_exit);
|
|
+
|
|
+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
|
|
+MODULE_DESCRIPTION("KB9202 Backlight Driver");
|
|
+MODULE_LICENSE("GPL");
|
|
diff -urN -x CVS linux-2.6.24/drivers/video/s1d15605fb.c linux-2.6/drivers/video/s1d15605fb.c
|
|
--- linux-2.6.24/drivers/video/s1d15605fb.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/drivers/video/s1d15605fb.c 2007-12-31 10:44:34.000000000 +0200
|
|
@@ -0,0 +1,658 @@
|
|
+/*
|
|
+ * drivers/video/s1d15605.c
|
|
+ *
|
|
+ * Adapted from several sources including:
|
|
+ * 1) Driver for AT91 LCD Controller
|
|
+ * Copyright (C) 2006 Atmel
|
|
+ *
|
|
+ * 2) Copyright (C) 2005 S. Kevin Hester
|
|
+ *
|
|
+ * This file is subject to the terms and conditions of the GNU General Public
|
|
+ * License. See the file COPYING in the main directory of this archive for
|
|
+ * more details.
|
|
+ *
|
|
+ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
|
|
+ * display. This display uses a clone of the common Epson SED 1531 display
|
|
+ * controller.
|
|
+ *
|
|
+ * I've heavily borrowed code from the vfb.c driver.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#ifdef DEBUG
|
|
+#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
|
|
+#else
|
|
+#define MSG(string, args...)
|
|
+#endif
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/fb.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include <asm/uaccess.h>
|
|
+
|
|
+#include <asm/arch/board.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+
|
|
+#ifdef CONFIG_PMAC_BACKLIGHT
|
|
+#include <asm/backlight.h>
|
|
+#endif
|
|
+
|
|
+#define VIDEOWIDTH 128
|
|
+#define VIDEOHEIGHT 64
|
|
+#define VIDEODEPTH 1 /* bits/pixel */
|
|
+#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8)
|
|
+
|
|
+/* The number of bytes that actually go to the device */
|
|
+#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT)
|
|
+#define VIDEOMEMSIZE PAGE_SIZE
|
|
+
|
|
+static struct fb_var_screeninfo s1d15605_default __initdata = {
|
|
+ .xres = VIDEOWIDTH,
|
|
+ .yres = VIDEOHEIGHT,
|
|
+ .xres_virtual = VIDEOWIDTH,
|
|
+ .yres_virtual = VIDEOHEIGHT,
|
|
+ .bits_per_pixel = VIDEODEPTH,
|
|
+ .red = { 0, 1, 0 },
|
|
+ .green = { 0, 1, 0 },
|
|
+ .blue = { 0, 1, 0 },
|
|
+ .activate = FB_ACTIVATE_NOW,
|
|
+ .pixclock = 20000,
|
|
+ .vmode = FB_VMODE_NONINTERLACED,
|
|
+};
|
|
+
|
|
+static struct fb_fix_screeninfo s1d15605_fix __initdata = {
|
|
+ .id = "s1d15605",
|
|
+ .type = FB_TYPE_PACKED_PIXELS,
|
|
+ .visual = FB_VISUAL_MONO10,
|
|
+ .xpanstep = 0,
|
|
+ .ypanstep = 0,
|
|
+ .ywrapstep = 0,
|
|
+ .accel = FB_ACCEL_NONE,
|
|
+};
|
|
+
|
|
+struct s1d15605fb_info {
|
|
+ struct fb_info *info;
|
|
+ char *mmio;
|
|
+ unsigned long reset_pin;
|
|
+ struct platform_device *pdev;
|
|
+};
|
|
+
|
|
+/*
|
|
+ * LCD device interface
|
|
+ */
|
|
+#define RESET_DISPLAY 0xE2
|
|
+#define LCD_BIAS_1_9 0xA2
|
|
+#define ADC_SELECT_REVERSE 0xA1
|
|
+#define COMMON_OUTPUT_NORMAL 0xC0
|
|
+#define V5_RESISTOR_RATIO 0x26
|
|
+#define ELECTRONIC_VOLUME_SET 0x81
|
|
+#define ELECTRONIC_VOLUME_INIT 0x20
|
|
+#define POWER_CONTROL_SET 0x28
|
|
+#define VOLTAGE_REGULATOR 0x02
|
|
+#define VOLTAGE_FOLLOWER 0x01
|
|
+#define BOOSTER_CIRCUIT 0x04
|
|
+#define DISPLAY_ON 0xAF
|
|
+#define START_LINE_SET 0x40
|
|
+#define PAGE_ADDRESS_SET 0xB0
|
|
+#define COLUMN_ADDRESS_HIGH 0x10
|
|
+#define COLUMN_ADDRESS_LOW 0x00
|
|
+#define RESISTOR_RATIO_START 0x20
|
|
+
|
|
+#define NUM_OF_PAGES 8
|
|
+#define NUM_OF_COLUMNS 128
|
|
+
|
|
+#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio)
|
|
+#define READ_COMMAND __raw_readb((sinfo)->mmio)
|
|
+#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000))
|
|
+#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000))
|
|
+
|
|
+
|
|
+/*
|
|
+ * s1d15605fb_resize_framebuffer
|
|
+ *
|
|
+ * Free allocated space if different. Allocate on new of changed.
|
|
+ * Returns -ENOMEM if the new framebuffer can not be allocated,
|
|
+ * zero on success.
|
|
+ */
|
|
+static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
|
|
+{
|
|
+ struct fb_info *info = sinfo->info;
|
|
+ struct fb_fix_screeninfo *fix = &info->fix;
|
|
+ struct fb_var_screeninfo *var = &info->var;
|
|
+ unsigned int new_size;
|
|
+ void *new_vaddr;
|
|
+
|
|
+ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
|
|
+
|
|
+ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
|
|
+ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
|
|
+
|
|
+ if (new_size == fix->smem_len)
|
|
+ return 0;
|
|
+
|
|
+ if (fix->smem_len) {
|
|
+ kfree(info->screen_base);
|
|
+ }
|
|
+
|
|
+ new_vaddr = kmalloc(new_size, GFP_KERNEL);
|
|
+
|
|
+ if (!new_vaddr) {
|
|
+ fix->smem_len = 0;
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ info->screen_base = new_vaddr;
|
|
+ fix->smem_start = (unsigned)new_vaddr;
|
|
+ fix->smem_len = new_size;
|
|
+ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
|
|
+
|
|
+ dev_info(info->device,
|
|
+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
|
|
+ (unsigned long)info->fix.smem_len / 1024,
|
|
+ (unsigned long)info->fix.smem_start,
|
|
+ info->screen_base);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
|
|
+ * bottom) each page seems to be eight pixels high, where these eight pixels are
|
|
+ * one byte
|
|
+ */
|
|
+static void s1d15605_update(struct fb_info *info)
|
|
+{
|
|
+ struct s1d15605fb_info *sinfo = info->par;
|
|
+ int page, i, row, colmask;
|
|
+ u8 retVal, *rowPtr;
|
|
+
|
|
+ WRITE_COMMAND(START_LINE_SET);
|
|
+ for (page = 0; page < NUM_OF_PAGES; ++page) {
|
|
+ WRITE_COMMAND(PAGE_ADDRESS_SET + page);
|
|
+ WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
|
|
+ WRITE_COMMAND(COLUMN_ADDRESS_LOW);
|
|
+
|
|
+ for (i = 0; i < NUM_OF_COLUMNS; ++i)
|
|
+ {
|
|
+ /* point of opportunity: optimization */
|
|
+ colmask = (1 << (i & 0x7));
|
|
+ rowPtr = (u8*)(info->screen_base);
|
|
+ rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
|
|
+ rowPtr += (i >> 3);
|
|
+ retVal = 0;
|
|
+ for (row = 0; row < 8; ++row)
|
|
+ {
|
|
+ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
|
|
+ rowPtr += VIDEOWIDTH_BYTES;
|
|
+ }
|
|
+ WRITE_DATA(retVal);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ WRITE_COMMAND(DISPLAY_ON);
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Setting the video mode has been split into two parts.
|
|
+ * First part, xxxfb_check_var, must not write anything
|
|
+ * to hardware, it should only verify and adjust var.
|
|
+ * This means it doesn't alter par but it does use hardware
|
|
+ * data from it to check this var.
|
|
+ */
|
|
+static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
|
|
+{
|
|
+ /*
|
|
+ * Some very basic checks
|
|
+ */
|
|
+ if (!var->xres)
|
|
+ var->xres = 1;
|
|
+ if (!var->yres)
|
|
+ var->yres = 1;
|
|
+ if (var->xres > var->xres_virtual)
|
|
+ var->xres_virtual = var->xres;
|
|
+ if (var->yres > var->yres_virtual)
|
|
+ var->yres_virtual = var->yres;
|
|
+
|
|
+ if(var->bits_per_pixel > VIDEODEPTH)
|
|
+ return -EINVAL;
|
|
+
|
|
+ /*
|
|
+ * Memory limit
|
|
+ */
|
|
+ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
|
|
+ ACTUALVIDEOMEMSIZE)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ /*
|
|
+ * Now that we checked it we alter var. The reason being is that the video
|
|
+ * mode passed in might not work but slight changes to it might make it
|
|
+ * work. This way we let the user know what is acceptable.
|
|
+ */
|
|
+ switch (var->bits_per_pixel) {
|
|
+ case 1:
|
|
+ var->red.offset = var->green.offset = var->blue.offset = 0;
|
|
+ var->red.length = var->green.length = var->blue.length
|
|
+ = var->bits_per_pixel;
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ var->xoffset = var->yoffset = 0;
|
|
+ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
|
|
+ var->transp.msb_right = 0;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * This routine actually sets the video mode. It's in here where we
|
|
+ * the hardware state info->par and fix which can be affected by the
|
|
+ * change in par. For this driver it doesn't do much.
|
|
+ */
|
|
+static int s1d15605_set_par(struct fb_info *info)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ MSG("%s:\n", __func__);
|
|
+ MSG(" * resolution: %ux%u (%ux%u virtual)\n",
|
|
+ info->var.xres, info->var.yres,
|
|
+ info->var.xres_virtual, info->var.yres_virtual);
|
|
+
|
|
+ ret = s1d15605fb_resize_framebuffer(info->par);
|
|
+
|
|
+ info->fix.visual = FB_VISUAL_MONO10;
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Set a single color register. The values supplied are already
|
|
+ * rounded down to the hardware's capabilities (according to the
|
|
+ * entries in the var structure). Return != 0 for invalid regno.
|
|
+ */
|
|
+static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
|
+ u_int transp, struct fb_info *info)
|
|
+{
|
|
+ if (regno > 1) /* no. of hw registers - we only do mono now */
|
|
+ return 1;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Currently, the routine will simply shut-off the backlight and prevent
|
|
+ * updates/refreshes. Modify according to application.
|
|
+ *
|
|
+ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
|
|
+ */
|
|
+static int s1d15605_blank(int blank, struct fb_info *info)
|
|
+{
|
|
+#ifdef CONFIG_PMAC_BACKLIGHT
|
|
+ if (blank)
|
|
+ pmac_backlight->props.power = FB_BLANK_POWERDOWN;
|
|
+ else
|
|
+ pmac_backlight->props.power = FB_BLANK_UNBLANK;
|
|
+ backlight_update_status(pmac_backlight);
|
|
+#endif
|
|
+ return 1;
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Pan or Wrap the Display
|
|
+ *
|
|
+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
|
|
+ */
|
|
+/*
|
|
+static int s1d15605_pan_display(struct fb_var_screeninfo *var,
|
|
+ struct fb_info *info)
|
|
+{
|
|
+ if (var->vmode & FB_VMODE_YWRAP) {
|
|
+ if (var->yoffset < 0
|
|
+ || var->yoffset >= info->var.yres_virtual
|
|
+ || var->xoffset)
|
|
+ return -EINVAL;
|
|
+ } else {
|
|
+ if (var->xoffset + var->xres > info->var.xres_virtual ||
|
|
+ var->yoffset + var->yres > info->var.yres_virtual)
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ info->var.xoffset = var->xoffset;
|
|
+ info->var.yoffset = var->yoffset;
|
|
+ if (var->vmode & FB_VMODE_YWRAP)
|
|
+ info->var.vmode |= FB_VMODE_YWRAP;
|
|
+ else
|
|
+ info->var.vmode &= ~FB_VMODE_YWRAP;
|
|
+ return 0;
|
|
+}
|
|
+*/
|
|
+
|
|
+
|
|
+static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
|
|
+{
|
|
+ cfb_copyarea(info, region);
|
|
+ s1d15605_update(info);
|
|
+}
|
|
+
|
|
+
|
|
+static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
|
|
+{
|
|
+ cfb_fillrect(info, rect);
|
|
+ s1d15605_update(info);
|
|
+}
|
|
+
|
|
+
|
|
+static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
|
|
+{
|
|
+ cfb_imageblit(p, image);
|
|
+ s1d15605_update(p);
|
|
+}
|
|
+
|
|
+
|
|
+/*
|
|
+ * Write the users data to our framebuffer, and then trigger a psuedo DMA
|
|
+ */
|
|
+static ssize_t s1d15605_write(struct file *file, const char *buf,
|
|
+ size_t count, loff_t *ppos)
|
|
+{
|
|
+ unsigned long p = *ppos;
|
|
+ struct inode *inode = file->f_dentry->d_inode;
|
|
+ int fbidx = iminor(inode);
|
|
+ struct fb_info *info = registered_fb[fbidx];
|
|
+ int err;
|
|
+
|
|
+ if (p > info->fix.smem_len)
|
|
+ return -ENOSPC;
|
|
+ if (count >= info->fix.smem_len)
|
|
+ count = info->fix.smem_len;
|
|
+ err = 0;
|
|
+ if (count + p > info->fix.smem_len) {
|
|
+ count = info->fix.smem_len - p;
|
|
+ err = -ENOSPC;
|
|
+ }
|
|
+ if (count) {
|
|
+ char *base_addr;
|
|
+
|
|
+ base_addr = info->screen_base;
|
|
+ count -= copy_from_user(base_addr+p, buf, count);
|
|
+ *ppos += count;
|
|
+ err = -EFAULT;
|
|
+ }
|
|
+
|
|
+ s1d15605_update(info);
|
|
+
|
|
+ if (count)
|
|
+ return count;
|
|
+
|
|
+ return err;
|
|
+}
|
|
+
|
|
+#ifdef USE_PRIVATE_VMA_FXS
|
|
+static void s1d15605_vma_open(struct vm_area_struct *vma)
|
|
+{
|
|
+ // FIXME - store stats in the device data via vm_private_data
|
|
+}
|
|
+
|
|
+
|
|
+static void s1d15605_vma_close(struct vm_area_struct *vma)
|
|
+{
|
|
+ // FIXME - store stats in the device data via vm_private_data
|
|
+}
|
|
+
|
|
+
|
|
+static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
|
|
+ unsigned long address, int *type)
|
|
+{
|
|
+ struct page *page;
|
|
+ struct fb_info *info = vma->vm_private_data;
|
|
+
|
|
+ page = virt_to_page(info->screen_base);
|
|
+ get_page(page);
|
|
+
|
|
+ // FIXME - now someone has a link to our page, start periodically blitting
|
|
+ // latest updates to the actual device.
|
|
+
|
|
+ return page;
|
|
+}
|
|
+
|
|
+
|
|
+static struct vm_operations_struct s1d15605_vm_ops = {
|
|
+ .open = s1d15605_vma_open,
|
|
+ .close = s1d15605_vma_close,
|
|
+ .nopage = s1d15605_vma_nopage
|
|
+};
|
|
+
|
|
+
|
|
+/* We don't do much here - because we have special vm_ops */
|
|
+static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
|
|
+{
|
|
+ vma->vm_ops = &s1d15605_vm_ops;
|
|
+ vma->vm_flags |= VM_RESERVED;
|
|
+ vma->vm_private_data = info;
|
|
+ s1d15605_vma_open(vma);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+#endif /* USE_PRIVATE_VMA_FXS */
|
|
+
|
|
+
|
|
+static struct fb_ops s1d15605fb_ops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .fb_check_var = s1d15605_check_var,
|
|
+ .fb_set_par = s1d15605_set_par,
|
|
+ .fb_setcolreg = s1d15605_setcolreg,
|
|
+ .fb_blank = s1d15605_blank,
|
|
+// .fb_pan_display = s1d15605_pan_display,
|
|
+ .fb_fillrect = s1d15605_fillrect,
|
|
+ .fb_copyarea = s1d15605_copyarea,
|
|
+ .fb_imageblit = s1d15605_imageblit,
|
|
+ .fb_write = s1d15605_write,
|
|
+#ifdef USE_PRIVATE_VMA_FXS
|
|
+ .fb_mmap = s1d15605_mmap,
|
|
+#endif
|
|
+};
|
|
+
|
|
+
|
|
+static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
|
|
+
|
|
+ char value;
|
|
+
|
|
+ /* release the reset line by reading the device - proto hardware */
|
|
+ value = READ_COMMAND;
|
|
+ value = READ_COMMAND;
|
|
+
|
|
+#ifdef CONFIG_MACH_KB9200
|
|
+ /* new boards have dedicated reset line */
|
|
+ gpio_set_value(sinfo->reset_pin, 1);
|
|
+#endif
|
|
+
|
|
+ /* initialize the device within 5ms */
|
|
+ WRITE_COMMAND(RESET_DISPLAY);
|
|
+ WRITE_COMMAND(LCD_BIAS_1_9);
|
|
+ WRITE_COMMAND(ADC_SELECT_REVERSE);
|
|
+ WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
|
|
+ WRITE_COMMAND(V5_RESISTOR_RATIO);
|
|
+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
|
|
+ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
|
|
+ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
|
|
+ WRITE_COMMAND(DISPLAY_ON);
|
|
+
|
|
+ WRITE_COMMAND(RESISTOR_RATIO_START + 4);
|
|
+ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
|
|
+ WRITE_COMMAND(0x33);
|
|
+}
|
|
+
|
|
+
|
|
+static int __init s1d15605fb_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct fb_info *info;
|
|
+ struct s1d15605fb_info *sinfo;
|
|
+ int ret;
|
|
+
|
|
+ MSG("%s\n", __func__);
|
|
+
|
|
+ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
|
|
+ dev_err(dev, "Cannot allocate framebuffer struct\n");
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ sinfo = info->par;
|
|
+ sinfo->info = info;
|
|
+ sinfo->pdev = pdev;
|
|
+
|
|
+ if (pdev->num_resources < 2) {
|
|
+ dev_err(dev, "Resources unusable\n");
|
|
+ ret = -ENODEV;
|
|
+ goto free_info;
|
|
+ }
|
|
+
|
|
+ info->fbops = &s1d15605fb_ops;
|
|
+ strcpy(info->fix.id, pdev->name);
|
|
+
|
|
+ info->fix.mmio_start = pdev->resource[0].start;
|
|
+ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
|
|
+ sinfo->reset_pin = pdev->resource[1].start;
|
|
+
|
|
+ ret = s1d15605fb_resize_framebuffer(sinfo);
|
|
+ if (ret < 0) {
|
|
+ dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
|
|
+ goto free_fb;
|
|
+ }
|
|
+
|
|
+ if (!request_mem_region(info->fix.mmio_start,
|
|
+ info->fix.mmio_len, pdev->name)) {
|
|
+ ret = -EBUSY;
|
|
+ goto free_fb;
|
|
+ }
|
|
+
|
|
+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
|
|
+ if (!sinfo->mmio) {
|
|
+ dev_err(dev, "Cannot map LCD memory region\n");
|
|
+ goto release_mem;
|
|
+ }
|
|
+
|
|
+ s1d15605_device_init(sinfo);
|
|
+
|
|
+ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
|
|
+
|
|
+ if (!ret || (ret == 4))
|
|
+ info->var = s1d15605_default;
|
|
+
|
|
+ info->fix = s1d15605_fix;
|
|
+ info->flags = FBINFO_FLAG_DEFAULT |
|
|
+/* FBINFO_HWACCEL_YPAN | */
|
|
+ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
|
|
+
|
|
+ ret = register_framebuffer(info);
|
|
+ if (ret < 0) {
|
|
+ dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
|
|
+ goto unmap_mmio;
|
|
+ }
|
|
+
|
|
+ dev_set_drvdata(dev, info);
|
|
+
|
|
+ memset(info->screen_base, 0, info->fix.smem_len);
|
|
+ info->var.activate |= FB_ACTIVATE_NOW;
|
|
+ ret = fb_set_var(info, &info->var);
|
|
+ if (ret) {
|
|
+ dev_warn(dev, "Unable to set display parameters\n");
|
|
+ }
|
|
+
|
|
+ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
|
|
+
|
|
+ dev_dbg(dev, "%s SUCCESS\n", __func__);
|
|
+
|
|
+ dev_info(dev, "Driver $Revision: 1.1 $\n");
|
|
+
|
|
+ return 0;
|
|
+
|
|
+unmap_mmio:
|
|
+ iounmap(sinfo->mmio);
|
|
+release_mem:
|
|
+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
|
|
+free_fb:
|
|
+ kfree(info->screen_base);
|
|
+
|
|
+free_info:
|
|
+ framebuffer_release(info);
|
|
+
|
|
+ dev_dbg(dev, "%s FAILED\n", __func__);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+
|
|
+static int __exit s1d15605fb_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct fb_info *info = dev_get_drvdata(dev);
|
|
+ struct s1d15605fb_info *sinfo = info->par;
|
|
+
|
|
+ if (!sinfo)
|
|
+ return 0;
|
|
+
|
|
+ unregister_framebuffer(info);
|
|
+
|
|
+ iounmap(sinfo->mmio);
|
|
+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
|
|
+
|
|
+ kfree(info->screen_base);
|
|
+
|
|
+ dev_set_drvdata(dev, NULL);
|
|
+ framebuffer_release(info);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+static struct platform_driver s1d15605fb_driver = {
|
|
+ .remove = __exit_p(s1d15605fb_remove),
|
|
+ .driver = {
|
|
+ .name = "s1d15605fb",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+
|
|
+static int __init s1d15605fb_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&s1d15605fb_driver, s1d15605fb_probe);
|
|
+}
|
|
+
|
|
+
|
|
+static void __exit s1d15605fb_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&s1d15605fb_driver);
|
|
+}
|
|
+
|
|
+
|
|
+module_init(s1d15605fb_init);
|
|
+module_exit(s1d15605fb_exit);
|
|
+
|
|
+
|
|
+MODULE_AUTHOR("KwikByte");
|
|
+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
|
|
+MODULE_LICENSE("GPL");
|
|
diff -urN -x CVS linux-2.6.24/drivers/watchdog/Kconfig linux-2.6/drivers/watchdog/Kconfig
|
|
--- linux-2.6.24/drivers/watchdog/Kconfig 2008-03-01 22:02:14.000000000 +0200
|
|
+++ linux-2.6/drivers/watchdog/Kconfig 2007-12-31 10:44:10.000000000 +0200
|
|
@@ -66,6 +66,14 @@
|
|
Watchdog timer embedded into AT91RM9200 chips. This will reboot your
|
|
system when the timeout is reached.
|
|
|
|
+config AT91SAM9_WATCHDOG
|
|
+ tristate "AT91SAM9 watchdog"
|
|
+ depends on ARCH_AT91 && !ARCH_AT91RM9200
|
|
+ select WATCHDOG_NOWAYOUT
|
|
+ help
|
|
+ Watchdog timer embedded into AT91SAM9 chips. This will reboot your
|
|
+ system when the timeout is reached.
|
|
+
|
|
config 21285_WATCHDOG
|
|
tristate "DC21285 watchdog"
|
|
depends on FOOTBRIDGE
|
|
diff -urN -x CVS linux-2.6.24/drivers/watchdog/Makefile linux-2.6/drivers/watchdog/Makefile
|
|
--- linux-2.6.24/drivers/watchdog/Makefile 2008-03-01 22:02:14.000000000 +0200
|
|
+++ linux-2.6/drivers/watchdog/Makefile 2007-12-31 10:44:20.000000000 +0200
|
|
@@ -26,6 +26,7 @@
|
|
|
|
# ARM Architecture
|
|
obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
|
|
+obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
|
|
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
|
|
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
|
|
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
|
|
diff -urN -x CVS linux-2.6.24/drivers/watchdog/at91sam9_wdt.c linux-2.6/drivers/watchdog/at91sam9_wdt.c
|
|
--- linux-2.6.24/drivers/watchdog/at91sam9_wdt.c 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/drivers/watchdog/at91sam9_wdt.c 2007-12-31 15:18:43.000000000 +0200
|
|
@@ -0,0 +1,258 @@
|
|
+/*
|
|
+ * Watchdog driver for Atmel AT91SAM9x processors.
|
|
+ *
|
|
+ * Copyright (C) 2007 Renaud CERRATO r.cerrato@til-technologies.fr
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version
|
|
+ * 2 of the License, or (at your option) any later version.
|
|
+ */
|
|
+
|
|
+/*
|
|
+ * The Watchdog Timer Mode Register can be only written to once. If the
|
|
+ * timeout need to be set from Linux, be sure that the bootstrap or the
|
|
+ * bootloader doesn't write to this register.
|
|
+ */
|
|
+
|
|
+#include <linux/errno.h>
|
|
+#include <linux/fs.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/miscdevice.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/moduleparam.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/types.h>
|
|
+#include <linux/watchdog.h>
|
|
+#include <linux/bitops.h>
|
|
+#include <linux/uaccess.h>
|
|
+
|
|
+#include <asm/arch/at91_wdt.h>
|
|
+
|
|
+
|
|
+#define WDT_MAX_TIME 16 /* seconds */
|
|
+
|
|
+static int wdt_timeout = -1; /* invalid */
|
|
+
|
|
+module_param(wdt_timeout, int, 0);
|
|
+MODULE_PARM_DESC(wdt_timeout, "Watchdog time in seconds. (default = disabled)");
|
|
+
|
|
+
|
|
+static unsigned long at91wdt_busy;
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/*
|
|
+ * Reload the watchdog timer. (ie, pat the watchdog)
|
|
+ */
|
|
+static void inline at91_wdt_reload(void)
|
|
+{
|
|
+ at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
|
|
+}
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+/*
|
|
+ * Watchdog device is opened, and watchdog starts running.
|
|
+ */
|
|
+static int at91_wdt_open(struct inode *inode, struct file *file)
|
|
+{
|
|
+ if (test_and_set_bit(0, &at91wdt_busy))
|
|
+ return -EBUSY;
|
|
+
|
|
+ return nonseekable_open(inode, file);
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Close the watchdog device.
|
|
+ */
|
|
+static int at91_wdt_close(struct inode *inode, struct file *file)
|
|
+{
|
|
+ clear_bit(0, &at91wdt_busy);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Change the watchdog time interval.
|
|
+ */
|
|
+static int at91_wdt_settimeout(int new_time)
|
|
+{
|
|
+ unsigned int reg, mr;
|
|
+ /*
|
|
+ * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
|
|
+ *
|
|
+ * Since WDV is a 12-bit counter, the maximum period is
|
|
+ * 4096 / 256 = 16 seconds.
|
|
+ */
|
|
+ if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
|
|
+ return -EINVAL;
|
|
+
|
|
+ wdt_timeout = new_time;
|
|
+
|
|
+ /* Program the Watchdog */
|
|
+ reg = AT91_WDT_WDRSTEN /* causes watchdog reset */
|
|
+ | AT91_WDT_WDRPROC /* causes processor reset */
|
|
+ | AT91_WDT_WDDBGHLT /* disabled in debug mode */
|
|
+ | AT91_WDT_WDD /* restart at any time */
|
|
+ | (((wdt_timeout * 256) - 1) & AT91_WDT_WDV); /* timer value */
|
|
+ at91_sys_write(AT91_WDT_MR, reg);
|
|
+
|
|
+ /* Check if watchdog could be programmed */
|
|
+ mr = at91_sys_read(AT91_WDT_MR);
|
|
+ if (mr != reg) {
|
|
+ printk(KERN_ERR "at91sam9_wdt: Watchdog register already programmed.\n");
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ at91_wdt_reload();
|
|
+
|
|
+ printk(KERN_INFO "AT91SAM9 Watchdog enabled (%d seconds, nowayout)\n", wdt_timeout);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct watchdog_info at91_wdt_info = {
|
|
+ .identity = "at91sam9 watchdog",
|
|
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
|
|
+};
|
|
+
|
|
+/*
|
|
+ * Handle commands from user-space.
|
|
+ */
|
|
+static int at91_wdt_ioctl(struct inode *inode, struct file *file,
|
|
+ unsigned int cmd, unsigned long arg)
|
|
+{
|
|
+ void __user *argp = (void __user *)arg;
|
|
+ int __user *p = argp;
|
|
+ int new_value, err;
|
|
+
|
|
+ switch (cmd) {
|
|
+ case WDIOC_KEEPALIVE:
|
|
+ at91_wdt_reload(); /* pat the watchdog */
|
|
+ return 0;
|
|
+
|
|
+ case WDIOC_GETSUPPORT:
|
|
+ return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0;
|
|
+
|
|
+ case WDIOC_SETTIMEOUT:
|
|
+ if (get_user(new_value, p))
|
|
+ return -EFAULT;
|
|
+
|
|
+ err = at91_wdt_settimeout(new_value);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ return put_user(wdt_timeout, p); /* return current value */
|
|
+
|
|
+ case WDIOC_GETTIMEOUT:
|
|
+ return put_user(wdt_timeout, p);
|
|
+
|
|
+ case WDIOC_GETSTATUS:
|
|
+ case WDIOC_GETBOOTSTATUS:
|
|
+ return put_user(0, p);
|
|
+ }
|
|
+ return -ENOTTY;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * Pat the watchdog whenever device is written to.
|
|
+ */
|
|
+static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
|
|
+{
|
|
+ at91_wdt_reload(); /* pat the watchdog */
|
|
+ return len;
|
|
+}
|
|
+
|
|
+/* ......................................................................... */
|
|
+
|
|
+static const struct file_operations at91wdt_fops = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .llseek = no_llseek,
|
|
+ .ioctl = at91_wdt_ioctl,
|
|
+ .open = at91_wdt_open,
|
|
+ .release = at91_wdt_close,
|
|
+ .write = at91_wdt_write,
|
|
+};
|
|
+
|
|
+static struct miscdevice at91wdt_miscdev = {
|
|
+ .minor = WATCHDOG_MINOR,
|
|
+ .name = "watchdog",
|
|
+ .fops = &at91wdt_fops,
|
|
+};
|
|
+
|
|
+static int __init at91wdt_probe(struct platform_device *pdev)
|
|
+{
|
|
+ int res;
|
|
+
|
|
+ if (at91wdt_miscdev.parent)
|
|
+ return -EBUSY;
|
|
+ at91wdt_miscdev.parent = &pdev->dev;
|
|
+
|
|
+ res = misc_register(&at91wdt_miscdev);
|
|
+ if (res)
|
|
+ return res;
|
|
+
|
|
+ /* Set watchdog */
|
|
+ if (at91_wdt_settimeout(wdt_timeout) == -EINVAL) {
|
|
+ pr_info("at91sam9_wdt: invalid timeout (must be between 1 and %d)\n", WDT_MAX_TIME);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int __exit at91wdt_remove(struct platform_device *pdev)
|
|
+{
|
|
+ int res;
|
|
+
|
|
+ res = misc_deregister(&at91wdt_miscdev);
|
|
+ if (!res)
|
|
+ at91wdt_miscdev.parent = NULL;
|
|
+
|
|
+ return res;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_PM
|
|
+
|
|
+static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int at91wdt_resume(struct platform_device *pdev)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#else
|
|
+#define at91wdt_suspend NULL
|
|
+#define at91wdt_resume NULL
|
|
+#endif
|
|
+
|
|
+static struct platform_driver at91wdt_driver = {
|
|
+ .remove = __exit_p(at91wdt_remove),
|
|
+ .suspend = at91wdt_suspend,
|
|
+ .resume = at91wdt_resume,
|
|
+ .driver = {
|
|
+ .name = "at91_wdt",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init at91sam_wdt_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&at91wdt_driver, at91wdt_probe);
|
|
+}
|
|
+
|
|
+static void __exit at91sam_wdt_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(&at91wdt_driver);
|
|
+}
|
|
+
|
|
+module_init(at91sam_wdt_init);
|
|
+module_exit(at91sam_wdt_exit);
|
|
+
|
|
+MODULE_AUTHOR("Renaud CERRATO");
|
|
+MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors");
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_ecc.h linux-2.6/include/asm-arm/arch-at91/at91_ecc.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91_ecc.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91_ecc.h 2008-02-25 21:15:20.000000000 +0200
|
|
@@ -13,26 +13,26 @@
|
|
#ifndef AT91_ECC_H
|
|
#define AT91_ECC_H
|
|
|
|
-#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */
|
|
+#define AT91_ECC_CR (0x00) /* Control register */
|
|
#define AT91_ECC_RST (1 << 0) /* Reset parity */
|
|
|
|
-#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */
|
|
+#define AT91_ECC_MR (0x04) /* Mode register */
|
|
#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
|
|
#define AT91_ECC_PAGESIZE_528 (0)
|
|
#define AT91_ECC_PAGESIZE_1056 (1)
|
|
#define AT91_ECC_PAGESIZE_2112 (2)
|
|
#define AT91_ECC_PAGESIZE_4224 (3)
|
|
|
|
-#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
|
|
+#define AT91_ECC_SR (0x08) /* Status register */
|
|
#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
|
|
#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
|
|
#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
|
|
|
|
-#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
|
|
+#define AT91_ECC_PR (0x0c) /* Parity register */
|
|
#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
|
|
#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
|
|
|
|
-#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
|
|
+#define AT91_ECC_NPR (0x10) /* NParity register */
|
|
#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
|
|
|
|
#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_lcdc.h linux-2.6/include/asm-arm/arch-at91/at91_lcdc.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91_lcdc.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91_lcdc.h 1970-01-01 02:00:00.000000000 +0200
|
|
@@ -1,148 +0,0 @@
|
|
-/*
|
|
- * include/asm-arm/arch-at91/at91_lcdc.h
|
|
- *
|
|
- * LCD Controller (LCDC).
|
|
- * Based on AT91SAM9261 datasheet revision E.
|
|
- *
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
- * it under the terms of the GNU General Public License as published by
|
|
- * the Free Software Foundation; either version 2 of the License, or
|
|
- * (at your option) any later version.
|
|
- */
|
|
-
|
|
-#ifndef AT91_LCDC_H
|
|
-#define AT91_LCDC_H
|
|
-
|
|
-#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
|
|
-#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
|
|
-#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
|
|
-#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
|
|
-#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
|
|
-#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
|
|
-
|
|
-#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
|
|
-#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
|
|
-#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */
|
|
-
|
|
-#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */
|
|
-#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
|
|
-#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */
|
|
-#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
|
|
-
|
|
-#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
|
|
-#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
|
|
-#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */
|
|
-#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
|
|
-
|
|
-#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
|
|
-#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */
|
|
-#define AT91_LCDC_DISTYPE_STNMONO (0 << 0)
|
|
-#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0)
|
|
-#define AT91_LCDC_DISTYPE_TFT (2 << 0)
|
|
-#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */
|
|
-#define AT91_LCDC_SCANMOD_SINGLE (0 << 2)
|
|
-#define AT91_LCDC_SCANMOD_DUAL (1 << 2)
|
|
-#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */
|
|
-#define AT91_LCDC_IFWIDTH_4 (0 << 3)
|
|
-#define AT91_LCDC_IFWIDTH_8 (1 << 3)
|
|
-#define AT91_LCDC_IFWIDTH_16 (2 << 3)
|
|
-#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
|
|
-#define AT91_LCDC_PIXELSIZE_1 (0 << 5)
|
|
-#define AT91_LCDC_PIXELSIZE_2 (1 << 5)
|
|
-#define AT91_LCDC_PIXELSIZE_4 (2 << 5)
|
|
-#define AT91_LCDC_PIXELSIZE_8 (3 << 5)
|
|
-#define AT91_LCDC_PIXELSIZE_16 (4 << 5)
|
|
-#define AT91_LCDC_PIXELSIZE_24 (5 << 5)
|
|
-#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */
|
|
-#define AT91_LCDC_INVVD_NORMAL (0 << 8)
|
|
-#define AT91_LCDC_INVVD_INVERTED (1 << 8)
|
|
-#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
|
|
-#define AT91_LCDC_INVFRAME_NORMAL (0 << 9)
|
|
-#define AT91_LCDC_INVFRAME_INVERTED (1 << 9)
|
|
-#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
|
|
-#define AT91_LCDC_INVLINE_NORMAL (0 << 10)
|
|
-#define AT91_LCDC_INVLINE_INVERTED (1 << 10)
|
|
-#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
|
|
-#define AT91_LCDC_INVCLK_NORMAL (0 << 11)
|
|
-#define AT91_LCDC_INVCLK_INVERTED (1 << 11)
|
|
-#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
|
|
-#define AT91_LCDC_INVDVAL_NORMAL (0 << 12)
|
|
-#define AT91_LCDC_INVDVAL_INVERTED (1 << 12)
|
|
-#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
|
|
-#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
|
|
-#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
|
|
-#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
|
|
-#define AT91_LCDC_MEMOR_BIG (0 << 31)
|
|
-#define AT91_LCDC_MEMOR_LITTLE (1 << 31)
|
|
-
|
|
-#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
|
|
-#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
|
|
-#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */
|
|
-#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */
|
|
-#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */
|
|
-
|
|
-#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
|
|
-#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
|
|
-#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */
|
|
-#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */
|
|
-
|
|
-#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
|
|
-#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
|
|
-#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */
|
|
-
|
|
-#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */
|
|
-#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
|
|
-
|
|
-#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
|
|
-#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
|
|
-#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
|
|
-#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
|
|
-#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
|
|
-#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
|
|
-#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
|
|
-#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
|
|
-#define AT91_LCDC_DP1_2_VAL (0xff)
|
|
-#define AT91_LCDC_DP4_7_VAL (0xfffffff)
|
|
-#define AT91_LCDC_DP3_5_VAL (0xfffff)
|
|
-#define AT91_LCDC_DP2_3_VAL (0xfff)
|
|
-#define AT91_LCDC_DP5_7_VAL (0xfffffff)
|
|
-#define AT91_LCDC_DP3_4_VAL (0xffff)
|
|
-#define AT91_LCDC_DP4_5_VAL (0xfffff)
|
|
-#define AT91_LCDC_DP6_7_VAL (0xfffffff)
|
|
-
|
|
-#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */
|
|
-#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */
|
|
-#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */
|
|
-#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */
|
|
-
|
|
-#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
|
|
-#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
|
|
-#define AT91_LCDC_PS_DIV1 (0 << 0)
|
|
-#define AT91_LCDC_PS_DIV2 (1 << 0)
|
|
-#define AT91_LCDC_PS_DIV4 (2 << 0)
|
|
-#define AT91_LCDC_PS_DIV8 (3 << 0)
|
|
-#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */
|
|
-#define AT91_LCDC_POL_NEGATIVE (0 << 2)
|
|
-#define AT91_LCDC_POL_POSITIVE (1 << 2)
|
|
-#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */
|
|
-#define AT91_LCDC_ENA_PWMDISABLE (0 << 3)
|
|
-#define AT91_LCDC_ENA_PWMENABLE (1 << 3)
|
|
-
|
|
-#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
|
|
-#define AT91_LCDC_CVAL (0xff) /* PWM compare value */
|
|
-
|
|
-#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */
|
|
-#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */
|
|
-#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */
|
|
-#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */
|
|
-#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */
|
|
-#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */
|
|
-#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
|
|
-#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
|
|
-#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
|
|
-#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
|
|
-#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
|
|
-
|
|
-#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
|
|
-
|
|
-#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_mci.h linux-2.6/include/asm-arm/arch-at91/at91_mci.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91_mci.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91_mci.h 2008-01-16 21:24:29.000000000 +0200
|
|
@@ -89,7 +89,7 @@
|
|
#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
|
|
#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
|
|
#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
|
|
-#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */
|
|
+#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */
|
|
#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
|
|
#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
|
|
#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_pmc.h linux-2.6/include/asm-arm/arch-at91/at91_pmc.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91_pmc.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91_pmc.h 2008-03-01 22:06:19.000000000 +0200
|
|
@@ -25,6 +25,7 @@
|
|
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
|
|
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
|
|
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
|
|
+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
|
|
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
|
|
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
|
|
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
|
|
@@ -37,7 +38,9 @@
|
|
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
|
|
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
|
|
|
|
-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
|
|
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
|
|
+
|
|
+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
|
|
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
|
|
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
|
|
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
|
|
@@ -52,6 +55,10 @@
|
|
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
|
|
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
|
|
#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
|
|
+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
|
|
+#define AT91_PMC_USBDIV_1 (0 << 28)
|
|
+#define AT91_PMC_USBDIV_2 (1 << 28)
|
|
+#define AT91_PMC_USBDIV_4 (2 << 28)
|
|
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
|
|
|
|
#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
|
|
@@ -69,10 +76,13 @@
|
|
#define AT91_PMC_PRES_32 (5 << 2)
|
|
#define AT91_PMC_PRES_64 (6 << 2)
|
|
#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
|
|
-#define AT91_PMC_MDIV_1 (0 << 8)
|
|
-#define AT91_PMC_MDIV_2 (1 << 8)
|
|
-#define AT91_PMC_MDIV_3 (2 << 8)
|
|
-#define AT91_PMC_MDIV_4 (3 << 8)
|
|
+#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
|
|
+#define AT91RM9200_PMC_MDIV_2 (1 << 8)
|
|
+#define AT91RM9200_PMC_MDIV_3 (2 << 8)
|
|
+#define AT91RM9200_PMC_MDIV_4 (3 << 8)
|
|
+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
|
|
+#define AT91SAM9_PMC_MDIV_2 (1 << 8)
|
|
+#define AT91SAM9_PMC_MDIV_4 (2 << 8)
|
|
|
|
#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
|
|
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_rtt.h linux-2.6/include/asm-arm/arch-at91/at91_rtt.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91_rtt.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91_rtt.h 2008-02-18 18:50:29.000000000 +0200
|
|
@@ -13,19 +13,19 @@
|
|
#ifndef AT91_RTT_H
|
|
#define AT91_RTT_H
|
|
|
|
-#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */
|
|
+#define AT91_RTT_MR (0x00) /* Real-time Mode Register */
|
|
#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
|
|
#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
|
|
#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
|
|
#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
|
|
|
|
-#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */
|
|
+#define AT91_RTT_AR (0x04) /* Real-time Alarm Register */
|
|
#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
|
|
|
|
-#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */
|
|
+#define AT91_RTT_VR (0x08) /* Real-time Value Register */
|
|
#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
|
|
|
|
-#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */
|
|
+#define AT91_RTT_SR (0x0c) /* Real-time Status Register */
|
|
#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
|
|
#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
|
|
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_shdwc.h linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91_shdwc.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h 2008-02-24 23:02:31.000000000 +0200
|
|
@@ -24,10 +24,12 @@
|
|
#define AT91_SHDW_WKMODE0_LOW 2
|
|
#define AT91_SHDW_WKMODE0_ANYLEVEL 3
|
|
#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
|
|
+#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
|
|
#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
|
|
|
|
#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
|
|
#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
|
|
#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
|
|
+#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
|
|
|
|
#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_twi.h linux-2.6/include/asm-arm/arch-at91/at91_twi.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91_twi.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91_twi.h 2008-01-16 21:24:29.000000000 +0200
|
|
@@ -21,6 +21,8 @@
|
|
#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
|
|
#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
|
|
#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
|
|
+#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */
|
|
+#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */
|
|
#define AT91_TWI_SWRST (1 << 7) /* Software Reset */
|
|
|
|
#define AT91_TWI_MMR 0x04 /* Master Mode Register */
|
|
@@ -32,6 +34,9 @@
|
|
#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
|
|
#define AT91_TWI_DADR (0x7f << 16) /* Device Address */
|
|
|
|
+#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */
|
|
+#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */
|
|
+
|
|
#define AT91_TWI_IADR 0x0c /* Internal Address Register */
|
|
|
|
#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
|
|
@@ -43,9 +48,15 @@
|
|
#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
|
|
#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
|
|
#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
|
|
+#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */
|
|
+#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */
|
|
+#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */
|
|
#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
|
|
#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
|
|
#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
|
|
+#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */
|
|
+#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */
|
|
+#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */
|
|
|
|
#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
|
|
#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9.h linux-2.6/include/asm-arm/arch-at91/at91cap9.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91cap9.h 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91cap9.h 2008-03-01 19:37:40.000000000 +0200
|
|
@@ -0,0 +1,126 @@
|
|
+/*
|
|
+ * include/asm-arm/arch-at91/at91cap9.h
|
|
+ *
|
|
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
|
|
+ * Copyright (C) 2007 Atmel Corporation.
|
|
+ *
|
|
+ * Common definitions.
|
|
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#ifndef AT91CAP9_H
|
|
+#define AT91CAP9_H
|
|
+
|
|
+/*
|
|
+ * Peripheral identifiers/interrupts.
|
|
+ */
|
|
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
|
|
+#define AT91_ID_SYS 1 /* System Peripherals */
|
|
+#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
|
|
+#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
|
|
+#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
|
|
+#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
|
|
+#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
|
|
+#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
|
|
+#define AT91CAP9_ID_US0 8 /* USART 0 */
|
|
+#define AT91CAP9_ID_US1 9 /* USART 1 */
|
|
+#define AT91CAP9_ID_US2 10 /* USART 2 */
|
|
+#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
|
|
+#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
|
|
+#define AT91CAP9_ID_CAN 13 /* CAN */
|
|
+#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
|
|
+#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
|
|
+#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
|
|
+#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
|
|
+#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
|
|
+#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
|
|
+#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
|
|
+#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
|
|
+#define AT91CAP9_ID_EMAC 22 /* Ethernet */
|
|
+#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
|
|
+#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
|
|
+#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
|
|
+#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
|
|
+#define AT91CAP9_ID_DMA 27 /* DMA Controller */
|
|
+#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
|
|
+#define AT91CAP9_ID_UHP 29 /* USB Host Port */
|
|
+#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
|
|
+#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
|
|
+
|
|
+/*
|
|
+ * User Peripheral physical base addresses.
|
|
+ */
|
|
+#define AT91CAP9_BASE_UDPHS 0xfff78000
|
|
+#define AT91CAP9_BASE_TCB0 0xfff7c000
|
|
+#define AT91CAP9_BASE_TC0 0xfff7c000
|
|
+#define AT91CAP9_BASE_TC1 0xfff7c040
|
|
+#define AT91CAP9_BASE_TC2 0xfff7c080
|
|
+#define AT91CAP9_BASE_MCI0 0xfff80000
|
|
+#define AT91CAP9_BASE_MCI1 0xfff84000
|
|
+#define AT91CAP9_BASE_TWI 0xfff88000
|
|
+#define AT91CAP9_BASE_US0 0xfff8c000
|
|
+#define AT91CAP9_BASE_US1 0xfff90000
|
|
+#define AT91CAP9_BASE_US2 0xfff94000
|
|
+#define AT91CAP9_BASE_SSC0 0xfff98000
|
|
+#define AT91CAP9_BASE_SSC1 0xfff9c000
|
|
+#define AT91CAP9_BASE_AC97C 0xfffa0000
|
|
+#define AT91CAP9_BASE_SPI0 0xfffa4000
|
|
+#define AT91CAP9_BASE_SPI1 0xfffa8000
|
|
+#define AT91CAP9_BASE_CAN 0xfffac000
|
|
+#define AT91CAP9_BASE_PWMC 0xfffb8000
|
|
+#define AT91CAP9_BASE_EMAC 0xfffbc000
|
|
+#define AT91CAP9_BASE_ADC 0xfffc0000
|
|
+#define AT91CAP9_BASE_ISI 0xfffc4000
|
|
+#define AT91_BASE_SYS 0xffffe200
|
|
+
|
|
+/*
|
|
+ * System Peripherals (offset from AT91_BASE_SYS)
|
|
+ */
|
|
+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
|
|
+#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
|
|
+#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
|
|
+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
|
|
+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
|
|
+#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
|
|
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
|
|
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
|
|
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
|
|
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
|
|
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
|
|
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
|
|
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
|
|
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
|
|
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
|
|
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
|
|
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
|
|
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
|
|
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
|
|
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
|
|
+
|
|
+#define AT91_USART0 AT91CAP9_BASE_US0
|
|
+#define AT91_USART1 AT91CAP9_BASE_US1
|
|
+#define AT91_USART2 AT91CAP9_BASE_US2
|
|
+
|
|
+
|
|
+/*
|
|
+ * Internal Memory.
|
|
+ */
|
|
+#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
|
|
+#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
|
|
+
|
|
+#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
|
|
+#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
|
|
+
|
|
+#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
|
|
+#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
|
|
+#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
|
|
+
|
|
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
|
|
+
|
|
+#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9_ddrsdr.h linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 2008-03-01 21:29:08.000000000 +0200
|
|
@@ -0,0 +1,100 @@
|
|
+/*
|
|
+ * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
|
|
+ *
|
|
+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
|
|
+ * Based on AT91CAP9 datasheet revision B.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#ifndef AT91CAP9_DDRSDR_H
|
|
+#define AT91CAP9_DDRSDR_H
|
|
+
|
|
+#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */
|
|
+#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
|
|
+#define AT91_DDRSDRC_MODE_NORMAL 0
|
|
+#define AT91_DDRSDRC_MODE_NOP 1
|
|
+#define AT91_DDRSDRC_MODE_PRECHARGE 2
|
|
+#define AT91_DDRSDRC_MODE_LMR 3
|
|
+#define AT91_DDRSDRC_MODE_REFRESH 4
|
|
+#define AT91_DDRSDRC_MODE_EXT_LMR 5
|
|
+#define AT91_DDRSDRC_MODE_DEEP 6
|
|
+
|
|
+#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */
|
|
+#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
|
|
+
|
|
+#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */
|
|
+#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
|
|
+#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
|
|
+#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
|
|
+#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
|
|
+#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
|
|
+#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
|
|
+#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
|
|
+#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
|
|
+#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
|
|
+#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
|
|
+#define AT91_DDRSDRC_NR_11 (0 << 2)
|
|
+#define AT91_DDRSDRC_NR_12 (1 << 2)
|
|
+#define AT91_DDRSDRC_NR_13 (2 << 2)
|
|
+#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
|
|
+#define AT91_DDRSDRC_CAS_2 (2 << 4)
|
|
+#define AT91_DDRSDRC_CAS_3 (3 << 4)
|
|
+#define AT91_DDRSDRC_CAS_25 (6 << 4)
|
|
+#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
|
|
+#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
|
|
+
|
|
+#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */
|
|
+#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
|
|
+#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
|
|
+#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
|
|
+#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
|
|
+#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
|
|
+#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
|
|
+#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
|
|
+#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
|
|
+
|
|
+#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */
|
|
+#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
|
|
+#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
|
|
+#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
|
|
+#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
|
|
+
|
|
+#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */
|
|
+#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
|
|
+#define AT91_DDRSDRC_LPCB_DISABLE 0
|
|
+#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
|
|
+#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
|
|
+#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
|
|
+#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
|
|
+#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
|
|
+#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
|
|
+#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
|
|
+#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
|
|
+#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
|
|
+#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
|
|
+#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
|
|
+
|
|
+#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */
|
|
+#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
|
|
+#define AT91_DDRSDRC_MD_SDR 0
|
|
+#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
|
|
+#define AT91_DDRSDRC_MD_DDR 2
|
|
+#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
|
|
+
|
|
+#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */
|
|
+#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
|
|
+#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
|
|
+#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
|
|
+#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
|
|
+#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
|
|
+#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
|
|
+#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
|
|
+#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
|
|
+#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
|
|
+
|
|
+
|
|
+#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9_matrix.h linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91cap9_matrix.h 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-02-18 22:43:38.000000000 +0200
|
|
@@ -0,0 +1,132 @@
|
|
+/*
|
|
+ * include/asm-arm/arch-at91/at91cap9_matrix.h
|
|
+ *
|
|
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
|
|
+ * Copyright (C) 2006 Atmel Corporation.
|
|
+ *
|
|
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
|
|
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#ifndef AT91CAP9_MATRIX_H
|
|
+#define AT91CAP9_MATRIX_H
|
|
+
|
|
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
|
|
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
|
|
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
|
|
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
|
|
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
|
|
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
|
|
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
|
|
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
|
|
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
|
|
+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
|
|
+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
|
|
+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
|
|
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
|
|
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
|
|
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
|
|
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
|
|
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
|
|
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
|
|
+
|
|
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
|
|
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
|
|
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
|
|
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
|
|
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
|
|
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
|
|
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
|
|
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
|
|
+#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
|
|
+#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
|
|
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
|
|
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
|
|
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
|
|
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
|
|
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
|
|
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
|
|
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
|
|
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
|
|
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
|
|
+
|
|
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
|
|
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
|
|
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
|
|
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
|
|
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
|
|
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
|
|
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
|
|
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
|
|
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
|
|
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
|
|
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
|
|
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
|
|
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
|
|
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
|
|
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
|
|
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
|
|
+#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
|
|
+#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
|
|
+#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
|
|
+#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
|
|
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
|
|
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
|
|
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
|
|
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
|
|
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
|
|
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
|
|
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
|
|
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
|
|
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
|
|
+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
|
|
+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
|
|
+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
|
|
+
|
|
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
|
|
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
|
|
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
|
|
+#define AT91_MATRIX_RCB2 (1 << 2)
|
|
+#define AT91_MATRIX_RCB3 (1 << 3)
|
|
+#define AT91_MATRIX_RCB4 (1 << 4)
|
|
+#define AT91_MATRIX_RCB5 (1 << 5)
|
|
+#define AT91_MATRIX_RCB6 (1 << 6)
|
|
+#define AT91_MATRIX_RCB7 (1 << 7)
|
|
+#define AT91_MATRIX_RCB8 (1 << 8)
|
|
+#define AT91_MATRIX_RCB9 (1 << 9)
|
|
+#define AT91_MATRIX_RCB10 (1 << 10)
|
|
+#define AT91_MATRIX_RCB11 (1 << 11)
|
|
+
|
|
+#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
|
|
+#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
|
|
+
|
|
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
|
|
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
|
|
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
|
|
+#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
|
|
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
|
|
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
|
|
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
|
|
+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
|
|
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
|
|
+#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
|
|
+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
|
|
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
|
|
+#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
|
|
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
|
|
+#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
|
|
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
|
|
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
|
|
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
|
|
+
|
|
+#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
|
|
+#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
|
|
+#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
|
|
+
|
|
+#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91rm9200.h linux-2.6/include/asm-arm/arch-at91/at91rm9200.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91rm9200.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91rm9200.h 2008-02-24 19:07:01.000000000 +0200
|
|
@@ -95,6 +95,12 @@
|
|
|
|
#define AT91_MATRIX 0 /* not supported */
|
|
|
|
+#define AT91_USART0 AT91RM9200_BASE_US0
|
|
+#define AT91_USART1 AT91RM9200_BASE_US1
|
|
+#define AT91_USART2 AT91RM9200_BASE_US2
|
|
+#define AT91_USART3 AT91RM9200_BASE_US3
|
|
+
|
|
+
|
|
/*
|
|
* Internal Memory.
|
|
*/
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9260.h linux-2.6/include/asm-arm/arch-at91/at91sam9260.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9260.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam9260.h 2008-02-24 19:00:30.000000000 +0200
|
|
@@ -99,6 +99,13 @@
|
|
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
|
|
#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
|
|
|
|
+#define AT91_USART0 AT91SAM9260_BASE_US0
|
|
+#define AT91_USART1 AT91SAM9260_BASE_US1
|
|
+#define AT91_USART2 AT91SAM9260_BASE_US2
|
|
+#define AT91_USART3 AT91SAM9260_BASE_US3
|
|
+#define AT91_USART4 AT91SAM9260_BASE_US4
|
|
+#define AT91_USART5 AT91SAM9260_BASE_US5
|
|
+
|
|
|
|
/*
|
|
* Internal Memory.
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9260_matrix.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-01-16 21:24:29.000000000 +0200
|
|
@@ -67,7 +67,7 @@
|
|
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
|
|
#define AT91_MATRIX_CS4A_SMC (0 << 4)
|
|
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
|
|
-#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
|
|
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
|
|
#define AT91_MATRIX_CS5A_SMC (0 << 5)
|
|
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
|
|
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9261.h linux-2.6/include/asm-arm/arch-at91/at91sam9261.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9261.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam9261.h 2008-02-24 19:00:30.000000000 +0200
|
|
@@ -84,6 +84,10 @@
|
|
#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
|
|
#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
|
|
|
|
+#define AT91_USART0 AT91SAM9261_BASE_US0
|
|
+#define AT91_USART1 AT91SAM9261_BASE_US1
|
|
+#define AT91_USART2 AT91SAM9261_BASE_US2
|
|
+
|
|
|
|
/*
|
|
* Internal Memory.
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9263.h linux-2.6/include/asm-arm/arch-at91/at91sam9263.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9263.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam9263.h 2008-02-25 21:16:43.000000000 +0200
|
|
@@ -101,8 +101,14 @@
|
|
#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
|
|
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
|
|
|
|
+#define AT91_SDRAMC AT91_SDRAMC0
|
|
#define AT91_SMC AT91_SMC0
|
|
|
|
+#define AT91_USART0 AT91SAM9263_BASE_US0
|
|
+#define AT91_USART1 AT91SAM9263_BASE_US1
|
|
+#define AT91_USART2 AT91SAM9263_BASE_US2
|
|
+
|
|
+
|
|
/*
|
|
* Internal Memory.
|
|
*/
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9263_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9263_matrix.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9263_matrix.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam9263_matrix.h 2008-02-18 22:44:20.000000000 +0200
|
|
@@ -44,7 +44,7 @@
|
|
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
|
|
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
|
|
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
|
|
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
|
|
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
|
|
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
|
|
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
|
|
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_mc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_mc.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h 1970-01-01 02:00:00.000000000 +0200
|
|
@@ -1,141 +0,0 @@
|
|
-/*
|
|
- * include/asm-arm/arch-at91/at91sam926x_mc.h
|
|
- *
|
|
- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
|
|
- * Based on AT91SAM9261 datasheet revision D.
|
|
- *
|
|
- * This program is free software; you can redistribute it and/or modify
|
|
- * it under the terms of the GNU General Public License as published by
|
|
- * the Free Software Foundation; either version 2 of the License, or
|
|
- * (at your option) any later version.
|
|
- */
|
|
-
|
|
-#ifndef AT91SAM926x_MC_H
|
|
-#define AT91SAM926x_MC_H
|
|
-
|
|
-/* SDRAM Controller (SDRAMC) registers */
|
|
-#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
|
|
-#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
|
|
-#define AT91_SDRAMC_MODE_NORMAL 0
|
|
-#define AT91_SDRAMC_MODE_NOP 1
|
|
-#define AT91_SDRAMC_MODE_PRECHARGE 2
|
|
-#define AT91_SDRAMC_MODE_LMR 3
|
|
-#define AT91_SDRAMC_MODE_REFRESH 4
|
|
-#define AT91_SDRAMC_MODE_EXT_LMR 5
|
|
-#define AT91_SDRAMC_MODE_DEEP 6
|
|
-
|
|
-#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
|
|
-#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
|
|
-
|
|
-#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
|
|
-#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
|
|
-#define AT91_SDRAMC_NC_8 (0 << 0)
|
|
-#define AT91_SDRAMC_NC_9 (1 << 0)
|
|
-#define AT91_SDRAMC_NC_10 (2 << 0)
|
|
-#define AT91_SDRAMC_NC_11 (3 << 0)
|
|
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
|
|
-#define AT91_SDRAMC_NR_11 (0 << 2)
|
|
-#define AT91_SDRAMC_NR_12 (1 << 2)
|
|
-#define AT91_SDRAMC_NR_13 (2 << 2)
|
|
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
|
|
-#define AT91_SDRAMC_NB_2 (0 << 4)
|
|
-#define AT91_SDRAMC_NB_4 (1 << 4)
|
|
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
|
|
-#define AT91_SDRAMC_CAS_1 (1 << 5)
|
|
-#define AT91_SDRAMC_CAS_2 (2 << 5)
|
|
-#define AT91_SDRAMC_CAS_3 (3 << 5)
|
|
-#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
|
|
-#define AT91_SDRAMC_DBW_32 (0 << 7)
|
|
-#define AT91_SDRAMC_DBW_16 (1 << 7)
|
|
-#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
|
|
-#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
|
|
-#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
|
|
-#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
|
|
-#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
|
|
-#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
|
|
-
|
|
-#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
|
|
-#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
|
|
-#define AT91_SDRAMC_LPCB_DISABLE 0
|
|
-#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
|
|
-#define AT91_SDRAMC_LPCB_POWER_DOWN 2
|
|
-#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
|
|
-#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
|
|
-#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
|
|
-#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */
|
|
-#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
|
|
-#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
|
|
-#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
|
|
-#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
|
|
-
|
|
-#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
|
|
-#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
|
|
-#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
|
|
-#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
|
|
-#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
|
|
-
|
|
-#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
|
|
-#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
|
|
-#define AT91_SDRAMC_MD_SDRAM 0
|
|
-#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
|
|
-
|
|
-
|
|
-/* Static Memory Controller (SMC) registers */
|
|
-#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
|
|
-#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
|
|
-#define AT91_SMC_NWESETUP_(x) ((x) << 0)
|
|
-#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
|
|
-#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
|
|
-#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
|
|
-#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
|
|
-#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
|
|
-#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
|
|
-
|
|
-#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
|
|
-#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
|
|
-#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
|
|
-#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
|
|
-#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
|
|
-#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
|
|
-#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
|
|
-#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
|
|
-#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
|
|
-
|
|
-#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
|
|
-#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
|
|
-#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
|
|
-#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
|
|
-#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
|
|
-
|
|
-#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
|
|
-#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
|
|
-#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
|
|
-#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
|
|
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
|
|
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
|
|
-#define AT91_SMC_EXNWMODE_READY (3 << 4)
|
|
-#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
|
|
-#define AT91_SMC_BAT_SELECT (0 << 8)
|
|
-#define AT91_SMC_BAT_WRITE (1 << 8)
|
|
-#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
|
|
-#define AT91_SMC_DBW_8 (0 << 12)
|
|
-#define AT91_SMC_DBW_16 (1 << 12)
|
|
-#define AT91_SMC_DBW_32 (2 << 12)
|
|
-#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
|
|
-#define AT91_SMC_TDF_(x) ((x) << 16)
|
|
-#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
|
|
-#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
|
|
-#define AT91_SMC_PS (3 << 28) /* Page Size */
|
|
-#define AT91_SMC_PS_4 (0 << 28)
|
|
-#define AT91_SMC_PS_8 (1 << 28)
|
|
-#define AT91_SMC_PS_16 (2 << 28)
|
|
-#define AT91_SMC_PS_32 (3 << 28)
|
|
-
|
|
-#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
|
|
-#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
|
|
-#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
|
|
-#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
|
|
-#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
|
|
-#endif
|
|
-
|
|
-#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_sdramc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_sdramc.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_sdramc.h 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_sdramc.h 2008-03-01 21:17:06.000000000 +0200
|
|
@@ -0,0 +1,83 @@
|
|
+/*
|
|
+ * include/asm-arm/arch-at91/at91sam926x_sdramc.h
|
|
+ *
|
|
+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
|
|
+ * Based on AT91SAM9261 datasheet revision D.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#ifndef AT91SAM926x_SDRAMC_H
|
|
+#define AT91SAM926x_SDRAMC_H
|
|
+
|
|
+/* SDRAM Controller (SDRAMC) registers */
|
|
+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
|
|
+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
|
|
+#define AT91_SDRAMC_MODE_NORMAL 0
|
|
+#define AT91_SDRAMC_MODE_NOP 1
|
|
+#define AT91_SDRAMC_MODE_PRECHARGE 2
|
|
+#define AT91_SDRAMC_MODE_LMR 3
|
|
+#define AT91_SDRAMC_MODE_REFRESH 4
|
|
+#define AT91_SDRAMC_MODE_EXT_LMR 5
|
|
+#define AT91_SDRAMC_MODE_DEEP 6
|
|
+
|
|
+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
|
|
+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
|
|
+
|
|
+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
|
|
+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
|
|
+#define AT91_SDRAMC_NC_8 (0 << 0)
|
|
+#define AT91_SDRAMC_NC_9 (1 << 0)
|
|
+#define AT91_SDRAMC_NC_10 (2 << 0)
|
|
+#define AT91_SDRAMC_NC_11 (3 << 0)
|
|
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
|
|
+#define AT91_SDRAMC_NR_11 (0 << 2)
|
|
+#define AT91_SDRAMC_NR_12 (1 << 2)
|
|
+#define AT91_SDRAMC_NR_13 (2 << 2)
|
|
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
|
|
+#define AT91_SDRAMC_NB_2 (0 << 4)
|
|
+#define AT91_SDRAMC_NB_4 (1 << 4)
|
|
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
|
|
+#define AT91_SDRAMC_CAS_1 (1 << 5)
|
|
+#define AT91_SDRAMC_CAS_2 (2 << 5)
|
|
+#define AT91_SDRAMC_CAS_3 (3 << 5)
|
|
+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
|
|
+#define AT91_SDRAMC_DBW_32 (0 << 7)
|
|
+#define AT91_SDRAMC_DBW_16 (1 << 7)
|
|
+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
|
|
+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
|
|
+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
|
|
+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
|
|
+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
|
|
+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
|
|
+
|
|
+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
|
|
+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
|
|
+#define AT91_SDRAMC_LPCB_DISABLE 0
|
|
+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
|
|
+#define AT91_SDRAMC_LPCB_POWER_DOWN 2
|
|
+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
|
|
+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
|
|
+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
|
|
+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */
|
|
+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
|
|
+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
|
|
+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
|
|
+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
|
|
+
|
|
+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
|
|
+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
|
|
+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
|
|
+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
|
|
+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
|
|
+
|
|
+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
|
|
+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
|
|
+#define AT91_SDRAMC_MD_SDRAM 0
|
|
+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
|
|
+
|
|
+
|
|
+#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_smc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_smc.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_smc.h 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_smc.h 2008-03-01 20:28:24.000000000 +0200
|
|
@@ -0,0 +1,73 @@
|
|
+/*
|
|
+ * include/asm-arm/arch-at91/at91sam926x_smc.h
|
|
+ *
|
|
+ * Static Memory Controllers (SMC) - System peripherals registers.
|
|
+ * Based on AT91SAM9261 datasheet revision D.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#ifndef AT91SAM926x_SMC_H
|
|
+#define AT91SAM926x_SMC_H
|
|
+
|
|
+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
|
|
+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
|
|
+#define AT91_SMC_NWESETUP_(x) ((x) << 0)
|
|
+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
|
|
+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
|
|
+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
|
|
+#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
|
|
+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
|
|
+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
|
|
+
|
|
+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
|
|
+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
|
|
+#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
|
|
+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
|
|
+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
|
|
+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
|
|
+#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
|
|
+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
|
|
+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
|
|
+
|
|
+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
|
|
+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
|
|
+#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
|
|
+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
|
|
+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
|
|
+
|
|
+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
|
|
+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
|
|
+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
|
|
+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
|
|
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
|
|
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
|
|
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
|
|
+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
|
|
+#define AT91_SMC_BAT_SELECT (0 << 8)
|
|
+#define AT91_SMC_BAT_WRITE (1 << 8)
|
|
+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
|
|
+#define AT91_SMC_DBW_8 (0 << 12)
|
|
+#define AT91_SMC_DBW_16 (1 << 12)
|
|
+#define AT91_SMC_DBW_32 (2 << 12)
|
|
+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
|
|
+#define AT91_SMC_TDF_(x) ((x) << 16)
|
|
+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
|
|
+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
|
|
+#define AT91_SMC_PS (3 << 28) /* Page Size */
|
|
+#define AT91_SMC_PS_4 (0 << 28)
|
|
+#define AT91_SMC_PS_8 (1 << 28)
|
|
+#define AT91_SMC_PS_16 (2 << 28)
|
|
+#define AT91_SMC_PS_32 (3 << 28)
|
|
+
|
|
+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
|
|
+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
|
|
+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
|
|
+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
|
|
+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
|
|
+#endif
|
|
+
|
|
+#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h 2008-02-24 19:00:30.000000000 +0200
|
|
@@ -94,6 +94,11 @@
|
|
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
|
|
#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
|
|
|
|
+#define AT91_USART0 AT91SAM9RL_BASE_US0
|
|
+#define AT91_USART1 AT91SAM9RL_BASE_US1
|
|
+#define AT91_USART2 AT91SAM9RL_BASE_US2
|
|
+#define AT91_USART3 AT91SAM9RL_BASE_US3
|
|
+
|
|
|
|
/*
|
|
* Internal Memory.
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl_matrix.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl_matrix.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl_matrix.h 2008-02-18 22:44:40.000000000 +0200
|
|
@@ -38,7 +38,7 @@
|
|
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
|
|
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
|
|
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
|
|
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
|
|
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
|
|
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
|
|
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
|
|
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/board.h linux-2.6/include/asm-arm/arch-at91/board.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/board.h 2008-03-01 22:02:15.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/board.h 2008-03-01 23:39:28.000000000 +0200
|
|
@@ -34,6 +34,7 @@
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
+#include <linux/leds.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
/* USB Device */
|
|
@@ -71,7 +72,7 @@
|
|
};
|
|
extern void __init at91_add_device_eth(struct at91_eth_data *data);
|
|
|
|
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
|
|
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
|
|
#define eth_platform_data at91_eth_data
|
|
#endif
|
|
|
|
@@ -101,13 +102,23 @@
|
|
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
|
|
|
|
/* Serial */
|
|
+#define ATMEL_UART_CTS 0x01
|
|
+#define ATMEL_UART_RTS 0x02
|
|
+#define ATMEL_UART_DSR 0x04
|
|
+#define ATMEL_UART_DTR 0x08
|
|
+#define ATMEL_UART_DCD 0x10
|
|
+#define ATMEL_UART_RI 0x20
|
|
+
|
|
+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
|
|
+extern void __init at91_set_serial_console(unsigned portnr);
|
|
+
|
|
struct at91_uart_config {
|
|
unsigned short console_tty; /* tty number of serial console */
|
|
unsigned short nr_tty; /* number of serial tty's */
|
|
short tty_map[]; /* map UART to tty number */
|
|
};
|
|
extern struct platform_device *atmel_default_console_device;
|
|
-extern void __init at91_init_serial(struct at91_uart_config *config);
|
|
+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
|
|
|
|
struct atmel_uart_data {
|
|
short use_dma_tx; /* use transmit DMA? */
|
|
@@ -116,6 +127,23 @@
|
|
};
|
|
extern void __init at91_add_device_serial(void);
|
|
|
|
+ /*
|
|
+ * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
|
|
+ * platform devices. Their SSC ID is part of their configuration data,
|
|
+ * along with information about which SSC signals they should use.
|
|
+ */
|
|
+#define ATMEL_SSC_TK 0x01
|
|
+#define ATMEL_SSC_TF 0x02
|
|
+#define ATMEL_SSC_TD 0x04
|
|
+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
|
|
+
|
|
+#define ATMEL_SSC_RK 0x10
|
|
+#define ATMEL_SSC_RF 0x20
|
|
+#define ATMEL_SSC_RD 0x40
|
|
+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
|
|
+
|
|
+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
|
|
+
|
|
/* LCD Controller */
|
|
struct atmel_lcdfb_info;
|
|
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
|
|
@@ -126,10 +154,12 @@
|
|
};
|
|
extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
|
|
|
|
+ /* ISI */
|
|
+extern void __init at91_add_device_isi(void);
|
|
+
|
|
/* LEDs */
|
|
-extern u8 at91_leds_cpu;
|
|
-extern u8 at91_leds_timer;
|
|
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
|
|
+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
|
|
|
|
/* FIXME: this needs a better location, but gets stuff building again */
|
|
extern int at91_suspend_entering_slow_clock(void);
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/cpu.h linux-2.6/include/asm-arm/arch-at91/cpu.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/cpu.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/cpu.h 2008-01-17 11:41:08.000000000 +0200
|
|
@@ -21,13 +21,13 @@
|
|
#define ARCH_ID_AT91SAM9260 0x019803a0
|
|
#define ARCH_ID_AT91SAM9261 0x019703a0
|
|
#define ARCH_ID_AT91SAM9263 0x019607a0
|
|
+#define ARCH_ID_AT91SAM9RL64 0x019b03a0
|
|
+#define ARCH_ID_AT91CAP9 0x039A03A0
|
|
|
|
#define ARCH_ID_AT91SAM9XE128 0x329973a0
|
|
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
|
|
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
|
|
|
|
-#define ARCH_ID_AT91SAM9RL64 0x019b03a0
|
|
-
|
|
#define ARCH_ID_AT91M40800 0x14080044
|
|
#define ARCH_ID_AT91R40807 0x44080746
|
|
#define ARCH_ID_AT91M40807 0x14080745
|
|
@@ -81,6 +81,11 @@
|
|
#define cpu_is_at91sam9rl() (0)
|
|
#endif
|
|
|
|
+#ifdef CONFIG_ARCH_AT91CAP9
|
|
+#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
|
|
+#else
|
|
+#define cpu_is_at91cap9() (0)
|
|
+#endif
|
|
|
|
/*
|
|
* Since this is ARM, we will never run on any AVR32 CPU. But these
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/entry-macro.S linux-2.6/include/asm-arm/arch-at91/entry-macro.S
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/entry-macro.S 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/entry-macro.S 2008-01-16 21:24:29.000000000 +0200
|
|
@@ -17,13 +17,13 @@
|
|
.endm
|
|
|
|
.macro get_irqnr_preamble, base, tmp
|
|
+ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
|
|
.endm
|
|
|
|
.macro arch_ret_to_user, tmp1, tmp2
|
|
.endm
|
|
|
|
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
|
|
- ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
|
|
ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
|
|
ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
|
|
teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/hardware.h linux-2.6/include/asm-arm/arch-at91/hardware.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/hardware.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/hardware.h 2008-01-16 21:25:18.000000000 +0200
|
|
@@ -26,6 +26,8 @@
|
|
#include <asm/arch/at91sam9263.h>
|
|
#elif defined(CONFIG_ARCH_AT91SAM9RL)
|
|
#include <asm/arch/at91sam9rl.h>
|
|
+#elif defined(CONFIG_ARCH_AT91CAP9)
|
|
+#include <asm/arch/at91cap9.h>
|
|
#elif defined(CONFIG_ARCH_AT91X40)
|
|
#include <asm/arch/at91x40.h>
|
|
#else
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/ics1523.h linux-2.6/include/asm-arm/arch-at91/ics1523.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/ics1523.h 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/ics1523.h 2008-01-16 21:24:29.000000000 +0200
|
|
@@ -0,0 +1,154 @@
|
|
+//*----------------------------------------------------------------------------
|
|
+//* ATMEL Microcontroller Software Support - ROUSSET -
|
|
+//*----------------------------------------------------------------------------
|
|
+//* The software is delivered "AS IS" without warranty or condition of any
|
|
+//* kind, either express, implied or statutory. This includes without
|
|
+//* limitation any warranty or condition with respect to merchantability or
|
|
+//* fitness for any particular purpose, or against the infringements of
|
|
+//* intellectual property rights of others.
|
|
+//*----------------------------------------------------------------------------
|
|
+//* File Name : ics1523.h
|
|
+//* Object : Clock Generator Prototyping File.
|
|
+//*
|
|
+//* 1.0 08/28/02 ED : Creation
|
|
+//* 1.2 13/01/03 FB : Update on lib V3
|
|
+//*----------------------------------------------------------------------------
|
|
+
|
|
+#ifndef ics1523_h
|
|
+#define ics1523_h
|
|
+
|
|
+/*-------------------------------------------*/
|
|
+/* ICS1523 TWI Serial Clock Definition */
|
|
+/*-------------------------------------------*/
|
|
+
|
|
+#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */
|
|
+#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */
|
|
+#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */
|
|
+
|
|
+#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */
|
|
+#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */
|
|
+
|
|
+/*-------------------------------------------*/
|
|
+/* ICS1523 Write Operation Definition */
|
|
+/*-------------------------------------------*/
|
|
+
|
|
+#define ICS1523_ACCESS_OK 0 /* OK */
|
|
+#define ICS1523_ACCESS_ERROR -1 /* NOK */
|
|
+
|
|
+/*-------------------------------------------*/
|
|
+/* ICS1523 Device Addresses Definition */
|
|
+/*-------------------------------------------*/
|
|
+
|
|
+#define ICS_ADDR 0x26 /* Device Address */
|
|
+
|
|
+/*--------------------------------------------------*/
|
|
+/* ICS1523 Registers Internal Addresses Definition */
|
|
+/*--------------------------------------------------*/
|
|
+
|
|
+#define ICS_ICR 0x0 /* Input Control Register */
|
|
+#define ICS_LCR 0x1 /* Loop Control Register */
|
|
+#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */
|
|
+#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */
|
|
+#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */
|
|
+#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */
|
|
+#define ICS_OE 0x6 /* Output Enables Register */
|
|
+#define ICS_OD 0x7 /* Osc Divider Register */
|
|
+#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */
|
|
+#define ICS_VID 0x10 /* Chip Version Register */
|
|
+#define ICS_RID 0x11 /* Chip Revision Register */
|
|
+#define ICS_SR 0x12 /* Status Register */
|
|
+
|
|
+/*------------------------------------------------------*/
|
|
+/* ICS1523 Input Control Register Bits Definition */
|
|
+/*------------------------------------------------------*/
|
|
+
|
|
+#define ICS_PDEN 0x1 /* Phase Detector Enable */
|
|
+#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */
|
|
+#define ICS_REFPOL 0x4 /* External Reference Polarity */
|
|
+#define ICS_FBKPOL 0x8 /* External Feedback Polarity */
|
|
+#define ICS_FBKSEL 0x10 /* External Feedback Select */
|
|
+#define ICS_FUNCSEL 0x20 /* Function Out Select */
|
|
+#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */
|
|
+#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */
|
|
+
|
|
+/*-----------------------------------------------------*/
|
|
+/* ICS1523 Loop Control Register Bits Definition */
|
|
+/*-----------------------------------------------------*/
|
|
+
|
|
+#define ICS_PFD 0x7 /* Phase Detector Gain */
|
|
+#define ICS_PSD 0x30 /* Post-Scaler Divider */
|
|
+
|
|
+/*----------------------------------------------------*/
|
|
+/* ICS1523 PLL FeedBack Divider LSBs Definition */
|
|
+/*----------------------------------------------------*/
|
|
+
|
|
+#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */
|
|
+
|
|
+/*----------------------------------------------------*/
|
|
+/* ICS1523 PLL FeedBack Divider MSBs Definition */
|
|
+/*----------------------------------------------------*/
|
|
+
|
|
+#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */
|
|
+
|
|
+/*------------------------------------------------------------*/
|
|
+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */
|
|
+/*------------------------------------------------------------*/
|
|
+
|
|
+#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */
|
|
+#define ICS_FILSEL 0x80 /* Loop Filter Select */
|
|
+
|
|
+/*----------------------------------------------------------------*/
|
|
+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */
|
|
+/*----------------------------------------------------------------*/
|
|
+
|
|
+#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */
|
|
+#define ICS_MMREV 0xFC /* Metal Mask Revision Number */
|
|
+
|
|
+/*-------------------------------------------------------*/
|
|
+/* ICS1523 Output Enables Register Bits Definition */
|
|
+/*-------------------------------------------------------*/
|
|
+
|
|
+#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */
|
|
+#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */
|
|
+#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */
|
|
+#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */
|
|
+#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */
|
|
+#define ICS_CLK2INV 0x20 /* CLK/2 Invert */
|
|
+#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */
|
|
+
|
|
+/*----------------------------------------------------*/
|
|
+/* ICS1523 Osc Divider Register Bits Definition */
|
|
+/*----------------------------------------------------*/
|
|
+
|
|
+#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */
|
|
+#define ICS_INSEL 0x80 /* Input Select */
|
|
+
|
|
+/*---------------------------------------------------*/
|
|
+/* ICS1523 DPA & PLL Reset Register Definition */
|
|
+/*---------------------------------------------------*/
|
|
+
|
|
+#define ICS_DPAR 0x0A /* DPA Reset Command */
|
|
+#define ICS_PLLR 0x50 /* PLL Reset Command */
|
|
+
|
|
+/*------------------------------------------------*/
|
|
+/* ICS1523 Chip Version Register Definition */
|
|
+/*------------------------------------------------*/
|
|
+
|
|
+#define ICS_CHIPV 0xFF /* Chip Version */
|
|
+
|
|
+/*-------------------------------------------------*/
|
|
+/* ICS1523 Chip Revision Register Definition */
|
|
+/*-------------------------------------------------*/
|
|
+
|
|
+#define ICS_CHIPR 0xFF /* Chip Revision */
|
|
+
|
|
+/*------------------------------------------*/
|
|
+/* ICS1523 Status Register Definition */
|
|
+/*------------------------------------------*/
|
|
+
|
|
+#define ICS_DPALOCK 0x1 /* DPA Lock Status */
|
|
+#define ICS_PLLLOCK 0x2 /* PLL Lock Status */
|
|
+
|
|
+int at91_ics1523_init(void);
|
|
+
|
|
+#endif /* ics1523_h */
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/spi.h linux-2.6/include/asm-arm/arch-at91/spi.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/spi.h 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/spi.h 2008-01-16 21:24:29.000000000 +0200
|
|
@@ -0,0 +1,54 @@
|
|
+/*
|
|
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
|
|
+ *
|
|
+ * (c) SAN People (Pty) Ltd
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version
|
|
+ * 2 of the License, or (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#ifndef AT91_LEGACY_SPI_H
|
|
+#define AT91_LEGACY_SPI_H
|
|
+
|
|
+#define SPI_MAJOR 153 /* registered device number */
|
|
+
|
|
+#define DEFAULT_SPI_CLK 6000000
|
|
+
|
|
+
|
|
+/* Maximum number of buffers in a single SPI transfer.
|
|
+ * DataFlash uses maximum of 2
|
|
+ * spidev interface supports up to 8.
|
|
+ */
|
|
+#define MAX_SPI_TRANSFERS 8
|
|
+#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */
|
|
+
|
|
+/*
|
|
+ * Describes the buffers for a SPI transfer.
|
|
+ * A transmit & receive buffer must be specified for each transfer
|
|
+ */
|
|
+struct spi_transfer_list {
|
|
+ void* tx[MAX_SPI_TRANSFERS]; /* transmit */
|
|
+ int txlen[MAX_SPI_TRANSFERS];
|
|
+ void* rx[MAX_SPI_TRANSFERS]; /* receive */
|
|
+ int rxlen[MAX_SPI_TRANSFERS];
|
|
+ int nr_transfers; /* number of transfers */
|
|
+ int curr; /* current transfer */
|
|
+};
|
|
+
|
|
+struct spi_local {
|
|
+ unsigned int pcs; /* Peripheral Chip Select value */
|
|
+
|
|
+ struct spi_transfer_list *xfers; /* current transfer list */
|
|
+ dma_addr_t tx, rx; /* DMA address for current transfer */
|
|
+ dma_addr_t txnext, rxnext; /* DMA address for next transfer */
|
|
+};
|
|
+
|
|
+
|
|
+/* Exported functions */
|
|
+extern void spi_access_bus(short device);
|
|
+extern void spi_release_bus(short device);
|
|
+extern int spi_transfer(struct spi_transfer_list* list);
|
|
+
|
|
+#endif
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/timex.h linux-2.6/include/asm-arm/arch-at91/timex.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/timex.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/timex.h 2008-01-16 21:25:18.000000000 +0200
|
|
@@ -42,6 +42,11 @@
|
|
#define AT91SAM9_MASTER_CLOCK 100000000
|
|
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
|
|
|
|
+#elif defined(CONFIG_ARCH_AT91CAP9)
|
|
+
|
|
+#define AT91CAP9_MASTER_CLOCK 100000000
|
|
+#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
|
|
+
|
|
#elif defined(CONFIG_ARCH_AT91X40)
|
|
|
|
#define AT91X40_MASTER_CLOCK 40000000
|
|
diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/uncompress.h linux-2.6/include/asm-arm/arch-at91/uncompress.h
|
|
--- linux-2.6.24/include/asm-arm/arch-at91/uncompress.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-arm/arch-at91/uncompress.h 2008-02-24 19:00:30.000000000 +0200
|
|
@@ -22,7 +22,23 @@
|
|
#define __ASM_ARCH_UNCOMPRESS_H
|
|
|
|
#include <asm/io.h>
|
|
-#include <asm/arch/at91_dbgu.h>
|
|
+#include <linux/atmel_serial.h>
|
|
+
|
|
+#if defined(CONFIG_AT91_EARLY_DBGU)
|
|
+#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
|
|
+#elif defined(CONFIG_AT91_EARLY_USART0)
|
|
+#define UART_OFFSET AT91_USART0
|
|
+#elif defined(CONFIG_AT91_EARLY_USART1)
|
|
+#define UART_OFFSET AT91_USART1
|
|
+#elif defined(CONFIG_AT91_EARLY_USART2)
|
|
+#define UART_OFFSET AT91_USART2
|
|
+#elif defined(CONFIG_AT91_EARLY_USART3)
|
|
+#define UART_OFFSET AT91_USART3
|
|
+#elif defined(CONFIG_AT91_EARLY_USART4)
|
|
+#define UART_OFFSET AT91_USART4
|
|
+#elif defined(CONFIG_AT91_EARLY_USART5)
|
|
+#define UART_OFFSET AT91_USART5
|
|
+#endif
|
|
|
|
/*
|
|
* The following code assumes the serial port has already been
|
|
@@ -33,22 +49,22 @@
|
|
*/
|
|
static void putc(int c)
|
|
{
|
|
-#ifdef AT91_DBGU
|
|
- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
|
|
+#ifdef UART_OFFSET
|
|
+ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
|
|
|
|
- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY))
|
|
+ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
|
|
barrier();
|
|
- __raw_writel(c, sys + AT91_DBGU_THR);
|
|
+ __raw_writel(c, sys + ATMEL_US_THR);
|
|
#endif
|
|
}
|
|
|
|
static inline void flush(void)
|
|
{
|
|
-#ifdef AT91_DBGU
|
|
- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
|
|
+#ifdef UART_OFFSET
|
|
+ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
|
|
|
|
/* wait for transmission to complete */
|
|
- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY))
|
|
+ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
|
|
barrier();
|
|
#endif
|
|
}
|
|
diff -urN -x CVS linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h linux-2.6/include/asm-avr32/arch-at32ap/cpu.h
|
|
--- linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/asm-avr32/arch-at32ap/cpu.h 2008-01-16 21:35:26.000000000 +0200
|
|
@@ -30,5 +30,6 @@
|
|
#define cpu_is_at91sam9261() (0)
|
|
#define cpu_is_at91sam9263() (0)
|
|
#define cpu_is_at91sam9rl() (0)
|
|
+#define cpu_is_at91cap9() (0)
|
|
|
|
#endif /* __ASM_ARCH_CPU_H */
|
|
diff -urN -x CVS linux-2.6.24/include/linux/atmel_serial.h linux-2.6/include/linux/atmel_serial.h
|
|
--- linux-2.6.24/include/linux/atmel_serial.h 1970-01-01 02:00:00.000000000 +0200
|
|
+++ linux-2.6/include/linux/atmel_serial.h 2008-02-24 19:00:30.000000000 +0200
|
|
@@ -0,0 +1,127 @@
|
|
+/*
|
|
+ * include/linux/atmel_serial.h
|
|
+ *
|
|
+ * Copyright (C) 2005 Ivan Kokshaysky
|
|
+ * Copyright (C) SAN People
|
|
+ *
|
|
+ * USART registers.
|
|
+ * Based on AT91RM9200 datasheet revision E.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version.
|
|
+ */
|
|
+
|
|
+#ifndef ATMEL_SERIAL_H
|
|
+#define ATMEL_SERIAL_H
|
|
+
|
|
+#define ATMEL_US_CR 0x00 /* Control Register */
|
|
+#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */
|
|
+#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */
|
|
+#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */
|
|
+#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */
|
|
+#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */
|
|
+#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */
|
|
+#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */
|
|
+#define ATMEL_US_STTBRK (1 << 9) /* Start Break */
|
|
+#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */
|
|
+#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */
|
|
+#define ATMEL_US_SENDA (1 << 12) /* Send Address */
|
|
+#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */
|
|
+#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
|
|
+#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */
|
|
+#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */
|
|
+#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */
|
|
+#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */
|
|
+#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */
|
|
+
|
|
+#define ATMEL_US_MR 0x04 /* Mode Register */
|
|
+#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */
|
|
+#define ATMEL_US_USMODE_NORMAL 0
|
|
+#define ATMEL_US_USMODE_RS485 1
|
|
+#define ATMEL_US_USMODE_HWHS 2
|
|
+#define ATMEL_US_USMODE_MODEM 3
|
|
+#define ATMEL_US_USMODE_ISO7816_T0 4
|
|
+#define ATMEL_US_USMODE_ISO7816_T1 6
|
|
+#define ATMEL_US_USMODE_IRDA 8
|
|
+#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
|
|
+#define ATMEL_US_USCLKS_MCK (0 << 4)
|
|
+#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
|
|
+#define ATMEL_US_USCLKS_SCK (3 << 4)
|
|
+#define ATMEL_US_CHRL (3 << 6) /* Character Length */
|
|
+#define ATMEL_US_CHRL_5 (0 << 6)
|
|
+#define ATMEL_US_CHRL_6 (1 << 6)
|
|
+#define ATMEL_US_CHRL_7 (2 << 6)
|
|
+#define ATMEL_US_CHRL_8 (3 << 6)
|
|
+#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */
|
|
+#define ATMEL_US_PAR (7 << 9) /* Parity Type */
|
|
+#define ATMEL_US_PAR_EVEN (0 << 9)
|
|
+#define ATMEL_US_PAR_ODD (1 << 9)
|
|
+#define ATMEL_US_PAR_SPACE (2 << 9)
|
|
+#define ATMEL_US_PAR_MARK (3 << 9)
|
|
+#define ATMEL_US_PAR_NONE (4 << 9)
|
|
+#define ATMEL_US_PAR_MULTI_DROP (6 << 9)
|
|
+#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */
|
|
+#define ATMEL_US_NBSTOP_1 (0 << 12)
|
|
+#define ATMEL_US_NBSTOP_1_5 (1 << 12)
|
|
+#define ATMEL_US_NBSTOP_2 (2 << 12)
|
|
+#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */
|
|
+#define ATMEL_US_CHMODE_NORMAL (0 << 14)
|
|
+#define ATMEL_US_CHMODE_ECHO (1 << 14)
|
|
+#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14)
|
|
+#define ATMEL_US_CHMODE_REM_LOOP (3 << 14)
|
|
+#define ATMEL_US_MSBF (1 << 16) /* Bit Order */
|
|
+#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */
|
|
+#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */
|
|
+#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */
|
|
+#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */
|
|
+#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */
|
|
+#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */
|
|
+#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */
|
|
+
|
|
+#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */
|
|
+#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */
|
|
+#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */
|
|
+#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */
|
|
+#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */
|
|
+#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */
|
|
+#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */
|
|
+#define ATMEL_US_FRAME (1 << 6) /* Framing Error */
|
|
+#define ATMEL_US_PARE (1 << 7) /* Parity Error */
|
|
+#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */
|
|
+#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */
|
|
+#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */
|
|
+#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
|
|
+#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */
|
|
+#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */
|
|
+#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */
|
|
+#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */
|
|
+#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */
|
|
+#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */
|
|
+#define ATMEL_US_RI (1 << 20) /* RI */
|
|
+#define ATMEL_US_DSR (1 << 21) /* DSR */
|
|
+#define ATMEL_US_DCD (1 << 22) /* DCD */
|
|
+#define ATMEL_US_CTS (1 << 23) /* CTS */
|
|
+
|
|
+#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */
|
|
+#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */
|
|
+#define ATMEL_US_CSR 0x14 /* Channel Status Register */
|
|
+#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
|
|
+#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
|
|
+#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */
|
|
+
|
|
+#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
|
|
+#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
|
|
+
|
|
+#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */
|
|
+#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */
|
|
+
|
|
+#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */
|
|
+#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */
|
|
+
|
|
+#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */
|
|
+#define ATMEL_US_NER 0x44 /* Number of Errors Register */
|
|
+#define ATMEL_US_IF 0x4c /* IrDA Filter Register */
|
|
+
|
|
+#endif
|
|
diff -urN -x CVS linux-2.6.24/include/linux/clk.h linux-2.6/include/linux/clk.h
|
|
--- linux-2.6.24/include/linux/clk.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/linux/clk.h 2007-12-31 10:44:34.000000000 +0200
|
|
@@ -121,4 +121,24 @@
|
|
*/
|
|
struct clk *clk_get_parent(struct clk *clk);
|
|
|
|
+/**
|
|
+ * clk_must_disable - report whether a clock's users must disable it
|
|
+ * @clk: one node in the clock tree
|
|
+ *
|
|
+ * This routine returns true only if the upcoming system state requires
|
|
+ * disabling the specified clock.
|
|
+ *
|
|
+ * It's common for platform power states to constrain certain clocks (and
|
|
+ * their descendants) to be unavailable, while other states allow that
|
|
+ * clock to be active. A platform's power states often include an "all on"
|
|
+ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
|
|
+ * operating states which sacrifice functionality for lower power usage.
|
|
+ *
|
|
+ * The constraint value is commonly tested in device driver suspend(), to
|
|
+ * leave clocks active if they are needed for features like wakeup events.
|
|
+ * On platforms that support reduced functionality operating states, the
|
|
+ * constraint may also need to be tested during resume() and probe() calls.
|
|
+ */
|
|
+int clk_must_disable(struct clk *clk);
|
|
+
|
|
#endif
|
|
diff -urN -x CVS linux-2.6.24/include/linux/i2c-id.h linux-2.6/include/linux/i2c-id.h
|
|
--- linux-2.6.24/include/linux/i2c-id.h 2008-03-01 22:02:17.000000000 +0200
|
|
+++ linux-2.6/include/linux/i2c-id.h 2008-01-16 13:15:35.000000000 +0200
|
|
@@ -211,6 +211,7 @@
|
|
|
|
/* --- PCA 9564 based algorithms */
|
|
#define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
|
|
+#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */
|
|
|
|
/* --- ACPI Embedded controller algorithms */
|
|
#define I2C_HW_ACPI_EC 0x1f0000
|
|
diff -urN -x CVS linux-2.6.24/include/video/atmel_lcdc.h linux-2.6/include/video/atmel_lcdc.h
|
|
--- linux-2.6.24/include/video/atmel_lcdc.h 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/include/video/atmel_lcdc.h 2008-02-25 22:45:57.000000000 +0200
|
|
@@ -22,7 +22,7 @@
|
|
#ifndef __ATMEL_LCDC_H__
|
|
#define __ATMEL_LCDC_H__
|
|
|
|
- /* LCD Controller info data structure */
|
|
+ /* LCD Controller info data structure, stored in device platform_data */
|
|
struct atmel_lcdfb_info {
|
|
spinlock_t lock;
|
|
struct fb_info *info;
|
|
@@ -33,7 +33,15 @@
|
|
struct platform_device *pdev;
|
|
struct clk *bus_clk;
|
|
struct clk *lcdc_clk;
|
|
- unsigned int default_bpp;
|
|
+
|
|
+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
|
|
+ struct backlight_device *backlight;
|
|
+ u8 bl_power;
|
|
+#endif
|
|
+ bool lcdcon_is_backlight;
|
|
+ u8 saved_lcdcon;
|
|
+
|
|
+ u8 default_bpp;
|
|
unsigned int default_lcdcon2;
|
|
unsigned int default_dmacon;
|
|
void (*atmel_lcdfb_power_control)(int on);
|
|
diff -urN -x CVS linux-2.6.24/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc/at91/eti_b1_wm8731.c
|
|
--- linux-2.6.24/sound/soc/at91/eti_b1_wm8731.c 2007-10-09 22:31:38.000000000 +0200
|
|
+++ linux-2.6/sound/soc/at91/eti_b1_wm8731.c 2008-03-01 22:06:40.000000000 +0200
|
|
@@ -34,8 +34,7 @@
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
|
|
-#include <asm/arch/hardware.h>
|
|
-#include <asm/arch/at91_pio.h>
|
|
+#include <asm/hardware.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
#include "../codecs/wm8731.h"
|
|
@@ -48,13 +47,6 @@
|
|
#define DBG(x...)
|
|
#endif
|
|
|
|
-#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
|
|
-#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
|
|
-#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
|
|
-#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
|
|
-#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
|
|
-#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
|
|
-
|
|
static struct clk *pck1_clk;
|
|
static struct clk *pllb_clk;
|
|
|
|
@@ -277,7 +269,6 @@
|
|
static int __init eti_b1_init(void)
|
|
{
|
|
int ret;
|
|
- u32 ssc_pio_lines;
|
|
struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
|
|
|
|
if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
|
|
@@ -311,19 +302,12 @@
|
|
goto fail_io_unmap;
|
|
}
|
|
|
|
- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
|
|
- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
|
|
-
|
|
- /* Reset all PIO registers and assign lines to peripheral A */
|
|
- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines);
|
|
- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines);
|
|
- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
|
|
- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
|
|
- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines);
|
|
- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
|
|
- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
|
|
- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines);
|
|
- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
|
|
+ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
|
|
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
|
|
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
|
|
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
|
|
+/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
|
|
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
|
|
|
|
/*
|
|
* Set PCK1 parent to PLLB and its rate to 12 Mhz.
|
|
diff -urN -x CVS linux-2.6.24/sound/spi/at73c213.c linux-2.6/sound/spi/at73c213.c
|
|
--- linux-2.6.24/sound/spi/at73c213.c 2008-03-01 22:02:18.000000000 +0200
|
|
+++ linux-2.6/sound/spi/at73c213.c 2008-02-26 20:37:07.000000000 +0200
|
|
@@ -112,7 +112,11 @@
|
|
static struct snd_pcm_hardware snd_at73c213_playback_hw = {
|
|
.info = SNDRV_PCM_INFO_INTERLEAVED |
|
|
SNDRV_PCM_INFO_BLOCK_TRANSFER,
|
|
+#ifdef __BIG_ENDIAN
|
|
.formats = SNDRV_PCM_FMTBIT_S16_BE,
|
|
+#else
|
|
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
+#endif
|
|
.rates = SNDRV_PCM_RATE_CONTINUOUS,
|
|
.rate_min = 8000, /* Replaced by chip->bitrate later. */
|
|
.rate_max = 50000, /* Replaced by chip->bitrate later. */
|