kumquat-buildroot/configs/mender_x86_64_efi_defconfig
Peter Korsgaard b35597decb mender_x86_64_efi_defconfig: specify 5.18 kernel headers
The defconfig uses a 5.18.4 kernel, so specify 5.18 kernel headers now that
is available.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-10-06 19:54:00 +02:00

80 lines
2.6 KiB
Plaintext

# Architecture
BR2_x86_64=y
# Toolchain
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_18=y
# System
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
# Required as vda4 doesn't mount on first boot with busybox
BR2_INIT_SYSV=y
# Required tools to create bootable media
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_MTOOLS=y
# Bootloader
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_X86_64_EFI=y
# Add mandatory modules from MENDER_GRUBENV_MANDATORY_MODULES
BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop loadenv hashsum echo halt gcry_sha256 test regexp"
BR2_TARGET_GRUB2_INSTALL_TOOLS=y
# Required tools to create a mender image
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MENDER_ARTIFACT=y
# Filesystem / image
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_OVERLAY="board/mender/x86_64/overlay"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/mender/x86_64/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/mender/x86_64/post-image-efi.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="--data-part-size=32M --device-type=buildroot-x86_64 --artifact-name=1.0"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18.14"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/mender/x86_64/linux.config"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
# Firmware
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3168=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_5000=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2A=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2B=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7260=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265D=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000C=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y
# Packages
#
# Use connman so that networking setup is simpler, via connmanctl tool
# acpid is for seamless power button support
BR2_PACKAGE_ACPID=y
BR2_PACKAGE_CONNMAN=y
BR2_PACKAGE_CONNMAN_CLIENT=y
BR2_PACKAGE_CONNMAN_WIFI=y
BR2_PACKAGE_MENDER=y
BR2_PACKAGE_MENDER_GRUBENV=y
BR2_PACKAGE_MENDER_GRUBENV_DEFINES="board/mender/x86_64/mender_grubenv_defines"