871db074b1
[Peter: don't allow MMU on bfin] Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
206 lines
6.8 KiB
Makefile
206 lines
6.8 KiB
Makefile
#############################################################
|
|
#
|
|
# U-Boot
|
|
#
|
|
#############################################################
|
|
U_BOOT_VERSION:=$(call qstrip,$(BR2_TARGET_UBOOT_VERSION))
|
|
U_BOOT_BOARD_NAME:=$(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
|
|
|
|
# U-Boot may not be selected in the configuration, but mkimage might
|
|
# be needed to build/prepare a kernel image. In this case, we just
|
|
# pick some random stable U-Boot version that will be used just to
|
|
# build mkimage.
|
|
ifeq ($(U_BOOT_VERSION),)
|
|
U_BOOT_VERSION=2010.12
|
|
endif
|
|
|
|
ifeq ($(U_BOOT_VERSION),custom)
|
|
# Handle custom U-Boot tarballs as specified by the configuration
|
|
U_BOOT_TARBALL=$(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION))
|
|
U_BOOT_SITE:=$(dir $(U_BOOT_TARBALL))
|
|
U_BOOT_SOURCE:=$(notdir $(U_BOOT_TARBALL))
|
|
else
|
|
# Handle stable official U-Boot versions
|
|
U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
|
|
U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
|
|
endif
|
|
|
|
U_BOOT_DIR:=$(BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
|
|
U_BOOT_CAT:=$(BZCAT)
|
|
|
|
ifeq ($(BR2_TARGET_UBOOT_FORMAT_KWB),y)
|
|
U_BOOT_BIN:=u-boot.kwb
|
|
U_BOOT_MAKE_OPT:=$(U_BOOT_BIN)
|
|
else ifeq ($(BR2_TARGET_UBOOT_FORMAT_LDR),y)
|
|
U_BOOT_BIN:=u-boot.ldr
|
|
else
|
|
U_BOOT_BIN:=u-boot.bin
|
|
endif
|
|
|
|
MKIMAGE:=$(HOST_DIR)/usr/bin/mkimage
|
|
|
|
U_BOOT_TARGETS:=$(BINARIES_DIR)/$(U_BOOT_BIN) $(MKIMAGE)
|
|
U_BOOT_ARCH=$(KERNEL_ARCH)
|
|
|
|
# u-boot in the past used arch=ppc for powerpc
|
|
ifneq ($(findstring x200,x$(U_BOOT_VERSION))$(findstring x2010.03,x$(U_BOOT_VERSION)),)
|
|
U_BOOT_ARCH=$(KERNEL_ARCH:powerpc=ppc)
|
|
endif
|
|
|
|
U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/config.h
|
|
|
|
ifeq ($(BR2_TARGET_UBOOT_TOOL_MKIMAGE),y)
|
|
U_BOOT_TARGETS+=$(TARGET_DIR)/usr/bin/mkimage
|
|
endif
|
|
ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
|
|
U_BOOT_TARGETS+=$(TARGET_DIR)/usr/sbin/fw_printenv
|
|
endif
|
|
|
|
U_BOOT_CONFIGURE_OPTS += CONFIG_NOSOFTFLOAT=1
|
|
|
|
# Define a helper function
|
|
define insert_define
|
|
@echo "#ifdef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
|
|
@echo "#undef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
|
|
@echo "#endif" >> $(U_BOOT_INC_CONF_FILE)
|
|
@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(U_BOOT_INC_CONF_FILE)
|
|
endef
|
|
|
|
$(DL_DIR)/$(U_BOOT_SOURCE):
|
|
$(call DOWNLOAD,$(U_BOOT_SITE),$(U_BOOT_SOURCE))
|
|
|
|
$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
|
|
mkdir -p $(@D)
|
|
$(INFLATE$(suffix $(U_BOOT_SOURCE))) $(DL_DIR)/$(U_BOOT_SOURCE) \
|
|
| tar $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) -
|
|
touch $@
|
|
|
|
$(U_BOOT_DIR)/.patched: $(U_BOOT_DIR)/.unpacked
|
|
toolchain/patch-kernel.sh $(U_BOOT_DIR) boot/u-boot \
|
|
u-boot-$(U_BOOT_VERSION)-\*.patch \
|
|
u-boot-$(U_BOOT_VERSION)-\*.patch.$(ARCH)
|
|
ifneq ($(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR)),)
|
|
toolchain/patch-kernel.sh $(U_BOOT_DIR) $(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR) u-boot-$(U_BOOT_VERSION)-\*.patch
|
|
endif
|
|
touch $@
|
|
|
|
$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.patched
|
|
ifeq ($(U_BOOT_BOARD_NAME),)
|
|
$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
|
|
endif
|
|
$(TARGET_CONFIGURE_OPTS) \
|
|
$(U_BOOT_CONFIGURE_OPTS) \
|
|
$(MAKE) -C $(U_BOOT_DIR) \
|
|
CROSS_COMPILE="$(TARGET_CROSS)" ARCH=$(U_BOOT_ARCH) \
|
|
$(U_BOOT_BOARD_NAME)_config
|
|
touch $@
|
|
|
|
$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
|
|
# Modify configuration header in $(U_BOOT_INC_CONF_FILE)
|
|
ifdef BR2_TARGET_UBOOT_NETWORK
|
|
@echo >> $(U_BOOT_INC_CONF_FILE)
|
|
@echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
|
|
@echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
|
|
@echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
|
|
$(call insert_define, DATE, $(DATE))
|
|
$(call insert_define, CONFIG_LOAD_SCRIPTS, 1)
|
|
ifneq ($(strip $(BR2_TARGET_UBOOT_IPADDR)),"")
|
|
$(call insert_define, CONFIG_IPADDR, $(BR2_TARGET_UBOOT_IPADDR))
|
|
endif
|
|
ifneq ($(strip $(BR2_TARGET_UBOOT_GATEWAY)),"")
|
|
$(call insert_define, CONFIG_GATEWAYIP, $(BR2_TARGET_UBOOT_GATEWAY))
|
|
endif
|
|
ifneq ($(strip $(BR2_TARGET_UBOOT_NETMASK)),"")
|
|
$(call insert_define, CONFIG_NETMASK, $(BR2_TARGET_UBOOT_NETMASK))
|
|
endif
|
|
ifneq ($(strip $(BR2_TARGET_UBOOT_SERVERIP)),"")
|
|
$(call insert_define, CONFIG_SERVERIP, $(BR2_TARGET_UBOOT_SERVERIP))
|
|
endif
|
|
ifneq ($(strip $(BR2_TARGET_UBOOT_ETHADDR)),"")
|
|
$(call insert_define, CONFIG_ETHADDR, $(BR2_TARGET_UBOOT_ETHADDR))
|
|
endif
|
|
ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),"")
|
|
$(call insert_define, CONFIG_ETH1ADDR, $(BR2_TARGET_UBOOT_ETH1ADDR))
|
|
endif
|
|
@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
|
|
endif # BR2_TARGET_UBOOT_NETWORK
|
|
touch $@
|
|
|
|
# Build U-Boot itself
|
|
$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
|
|
$(TARGET_CONFIGURE_OPTS) \
|
|
CFLAGS="$(TARGET_CFLAGS)" \
|
|
LDFLAGS="$(TARGET_LDFLAGS)" \
|
|
$(U_BOOT_CONFIGURE_OPTS) \
|
|
$(MAKE) CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)" ARCH=$(U_BOOT_ARCH) \
|
|
$(U_BOOT_MAKE_OPT) -C $(U_BOOT_DIR)
|
|
|
|
# Copy the result to the images/ directory
|
|
$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
|
|
rm -f $(BINARIES_DIR)/$(U_BOOT_BIN)
|
|
cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)/
|
|
|
|
# Build just mkimage for the host. It might have already been built by
|
|
# the U-Boot build procedure, but mkimage may also be needed even if
|
|
# U-Boot isn't selected in the configuration, to generate a kernel
|
|
# uImage.
|
|
$(MKIMAGE): $(U_BOOT_DIR)/.patched
|
|
mkdir -p $(@D)
|
|
$(MAKE) -C $(U_BOOT_DIR) CROSS_COMPILE="$(TARGET_CROSS)" ARCH=$(U_BOOT_ARCH) tools
|
|
cp -dpf $(U_BOOT_DIR)/tools/mkimage $(@D)
|
|
|
|
# Build manually mkimage for the target
|
|
$(TARGET_DIR)/usr/bin/mkimage: $(U_BOOT_DIR)/.configured
|
|
mkdir -p $(@D)
|
|
$(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(U_BOOT_DIR)/tools \
|
|
-DUSE_HOSTCC -o $@ \
|
|
$(U_BOOT_DIR)/common/image.c \
|
|
$(wildcard $(addprefix $(U_BOOT_DIR)/tools/,default_image.c \
|
|
fit_image.c imximage.c kwbimage.c mkimage.c)) \
|
|
$(addprefix $(U_BOOT_DIR)/lib*/,crc32.c md5.c sha1.c) \
|
|
$(U_BOOT_DIR)/tools/os_support.c \
|
|
$(wildcard $(U_BOOT_DIR)/libfdt/fdt*.c $(U_BOOT_DIR)/lib/libfdt/fdt*.c)
|
|
|
|
$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
|
|
|
|
# Build manually fw_printenv for the target
|
|
$(TARGET_DIR)/usr/sbin/fw_printenv: $(U_BOOT_DIR)/.configured
|
|
mkdir -p $(@D)
|
|
$(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(LINUX_HEADERS_DIR)/include \
|
|
-DUSE_HOSTCC -o $@ \
|
|
$(U_BOOT_DIR)/tools/env/*.c $(U_BOOT_DIR)/lib*/crc32.c
|
|
$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
|
|
ln -sf fw_printenv $(TARGET_DIR)/usr/sbin/fw_setenv
|
|
|
|
u-boot: $(U_BOOT_TARGETS)
|
|
|
|
u-boot-clean:
|
|
-$(MAKE) -C $(U_BOOT_DIR) clean
|
|
rm -f $(MKIMAGE)
|
|
|
|
u-boot-dirclean:
|
|
rm -rf $(U_BOOT_DIR)
|
|
|
|
u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
|
|
|
|
u-boot-unpacked: $(U_BOOT_DIR)/.patched
|
|
|
|
u-boot-configured: $(U_BOOT_DIR)/.header_modified
|
|
|
|
#############################################################
|
|
#
|
|
# Toplevel Makefile options
|
|
#
|
|
#############################################################
|
|
ifeq ($(BR2_TARGET_UBOOT),y)
|
|
TARGETS+=u-boot
|
|
|
|
# we NEED a board name unless we're at make source
|
|
ifeq ($(filter source,$(MAKECMDGOALS)),)
|
|
ifeq ($(U_BOOT_BOARD_NAME),)
|
|
$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
|
|
endif
|
|
endif
|
|
|
|
endif
|